Upgraded iTunes9 & Tiger and now can't choose remote speakers. Help?

I've tried a number of things recommended online to use my remote speakers again, but nothing has worked yet. In iTunes, "Look for remote speakers" is checked in Preferences. I can see them, but they're greyed out and I can't select them. The internet connection works fine through the Airport. I've tried turning off firewall, rebooting and turning it on again. iTunes Music Sharing is checked on the firewall.
I solved a separate network glitch caused by the Tiger upgrade by turning IPv6 to off in System Preferences>Network.
Any ideas?

It's hard for anyone to offer any advice when you don't tell us what specifically is happening or not happening. Is there an error message? If so, what does it say? What version of Illustrator are you using? Does Illustrator open at all? Does it open regular Illustrator files? Have you reinstalled Illustrator?

Similar Messages

Upgraded to Tiger and now can't open any illustrator files! Please help me!

I upgraded my OS to Tiger and then updated to 10.4.8 and now can't get any of my Illustrator EPS files to open. I have spent the whole day trying to figure this one out (Launch Services advice in other posts) without any luck. What is going on here?!!! I have so much serious work to get done this weekend!
Please help me!
Amy

It's hard for anyone to offer any advice when you don't tell us what specifically is happening or not happening. Is there an error message? If so, what does it say? What version of Illustrator are you using? Does Illustrator open at all? Does it open regular Illustrator files? Have you reinstalled Illustrator?

Just added Lion and now can't use remote speakers with iTunes

I recently installed the Lion OS (10.7.4) and now I cannot access my remote connection to my home stereo for iTunes. I can't find the icon to even select multiple spakers.

I suggest optening the Print & Scan Sytem Preferences. Once the preference pane opens highlight your printer in the Printers column on the left side of the window, then click on the little minus sign below the printer in order to remove your current printer selection.
Once your printer has been deleted, then click on the little plus sign located next to the minus sign in order to re-select your printer. Once the 'AddPrinter' window opens simply select your printer from the list. Make sure the printer is powered ON, there are no error LED's ON, and that any necessary cables are connected to your iMac. Hopefully reselecting the printer will resolve your issue.

I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

If you upgraded and were using a version of Acrobat Reader that was legacy, that is PPC compatible, then you will have to upgrade to a version compatible with Lion as Lion no longer has Rosetta to interface with the legacy software.
I know that Acrobat, full version, 10 works with Lion...use it myself.

Upgraded to maverick and now can't open excel projects

I recently upgraded to maverick and now can't go back to open excel spreadsheets I need for my business. I've even changed the permissions and I can only preview, not modify. Any suggestions?

Was just having this issue with my wife's computer after upgrading to Mavericks. Maybe a long shot, but if your filenames have forward slashes in them (such as for dates), change them to backslashes. No idea why but it works. I seem to recall having the same problem with Excel some time in the past and this was the solution then too.

HELP!!!! Just upgrade to Tiger and now nothing works

Please help me iv just upgraded to tiger and now none of my programs will open they crash on start-up, and also when i restart i get a little box with a blue globe inside it. then it goes to the unhappy face in a folder icon, then eventually it starts up. Please help me im buggerd without the mac.

Hi Andy!
What size is the Hard Drive, and how much space is avaialble?
How much RAM is installed, and is it original or added?
Did you use a Full Retail Version, of the Tiger Install DVD, to upgrade?
Did you do an Archive & Install, preserving User settings & preferences, installation, and if so, is the Previous System folder still on the HD?
ali b

Upgraded to Yosemite and now can't print wirelessly

Upgraded my 1yr old Mac Pro to Yosemite and now can't print wirelessly to my Epson XP-405 through my wireless home hub! I've tried re-installing new printer drivers etc, throwing away preferences etc... these sometimes work for a single print then goes back to "Printer can't be found". My older iMac doesn't seem to have this problem (yet - fingers crossed!) and prints ok on exactly the same wireless network.
Any suggestions gratefully received.

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Network Printer Troubleshooting
If you have the printers IP address open Terminal (Applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.

OAM 11g: Deleted IAMSUITEAGENT by accident and now can't login to oamconsole - help!

Hi everyone - I've deleted the IAMSUITEAGENT suite from security realm --> myrealm --> providers within the weblogic OAM admin console (hostname:port/console) and now can't log into the oamconsole (hostname:port/oamconsole). When I enter the username and password into the oamconsole login page, the page just refreshes - is there anything I can do to reinstall it?

"There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact you support personnel or package vendor."
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Upgraded to ILife and now can't open my photos

I had all my photos in iPhoto then I upgraded to iLife '11 and now I can't open my photos, Any suggestions?

now I can't open my photos, Any suggestions?
Jody,
What happens when you try to open your iPhoto library? An error message? Does iPhoto not launch?
please post back with more information.
What version of iPhoto did you upgrade from? You may need to download and run iPhoto Library Upgrader to be able to upgrade to the latest version, if you upgraded from iPhoto 5 or earlier.
iPhoto '11: About the Library Upgrader
Download here: here.
Regards
Léonie

Just upgraded to vista and now can't open itunes

I just upgraded to vista (what a pain) I have uninstalled itunes and then reinstalled itunes but I still can't open it. This is what happens. When I click on the itunes icon I get the licence agareement which I check agree and when it goes away I get an error message which says: "The folder Itunes is on a locked disk or you do not have write permissions for this folder." I have tried clicking on the Itunes icon and have gone to itunes properties control panel and clicked on security and tried to get permission many times. After reading post's on this fourm I went to the itunes folder on my c drive and went to the same control panel and tried again but to no avail. I had no trouble with itunes on XP and have used it for years. Btw I can open Quicktime player but it will not play my video files (I don't care because quicktime is not my default player). but I can open it.
I have an Ipod nano and I want to use it to listen to audio books but I can't load them onto it without itunes.
Thanks for any help in advances
tiger8384

Yes I still have a problem. This is what it is in a nutshell. With User Account Control on in vista I can't open itunes. I am not sure what happens when I try but here goes. First I have installed itunes into my computer and have an icon on my desktop. When I click on that icon the first thing that happens is that I get a licenses agreement which I accept. As soon as I accept the agreement it goes away and I get an error message that says “The folder Itunes is on a locked disk or you do not have write permissions for this folder." The only option that the error message gives me is to say “OK”. When I click on the OK button on the error message it goes away and nothing else happens. Because of this problem I have uninstalled and installed itunes at least 5 times.
I have tried to read as many post in this forum as I can trying to find a solutions to this problem but to no avail. I have also gone to the vista forum and have read as many posts as I can about itunes problems that are there but to no avail. I have tried many fixes that have not work except one. And that was “to turn off the User Account Control.” When I turned off this control I was able to open itunes for the first times. Since then I have opened itunes many times and use it to load my ipod. But when I turn on User Account Control I have the same problem and I can’t open itune. I am open to suggestions on how to fix this problem and at this time I am not sure what is wrong. I have tried my things trying to fix this problem but for all I know I might have does something wrong. So at point I will try anything that you suggest.

I upgraded to Mavericks and now can't open/save files

I upgraded my system to Mavericks 10.9.2 and now Creative cloud Indesign, Photoshop and Illustrator (the few programs that I've installed) will now not either open files, or if they do takes 3-5 minutes for simple files, and if they do open and I try to save them again they take even longer to save.
I've re-installed these programs... have throw away preference files, changed finder preferences, restarted multiple times, even zapped pram... nothing has worked!!!!
HELP!

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
These are the direct links to the 3 forums
http://forums.adobe.com/community/indesign
http://forums.adobe.com/community/illustrator
http://forums.adobe.com/community/illustrator
Adobe/Jive have a BAD title for the SEARCH THIS FORUM function
Go to any/all of those forums, and, in the area just under Ask a Question, type in
maverick
or
mavericks
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

HT203477 I was editing,upgraded FCP X and now can't access the projects

Hi there, I was editing and made an up grade to FCP X and now I can't access to the projects I was working, any help please.
Thanks
Mateo M

Yes I did, the first time after updated didn't ask me to update projects and events so I try in a second computer updating a diferent FCP X I had there and this time asked me to do it, I did but still stops for ever trying to load in the same project that in the first computer.
I can see the first 10 projects but when arrives to a particular one keeps loading for ever and can't move from there?

Using Logic Express 9.1.8 - Upgraded to Mavericks and now can't open Logic Express. Why please?

As soon as I try and open the LE application the icon starts bouncing up and down in the bottom tray and that's it. There is no more. I have to right click and force quit.
Became fed up and dragged it to the trash with the intention of reinstalling form original Logic Expres 9.0.0 disc. Couldn't install though as the installer crashes.
Don't know if this because of the "upgrade" to Mavericks but it a real coincidence.
Any help is appreciated.
Thanks

Well, the first thing I would have done is launch Disk Utility and run Repair Disk Permissions. It sounds like your problem may have been a permissions error and this may have resolved it. If that didn't help I would have next gone to my user>Libary>Preferences folder and deleted "com.apple.logic.express.plist."
Next step would have been to reboot the computer in Safe Mode or create a new user account to see if LE9 would launch.
Even though you trashed LE9 I would still suggest repairing permissions at this point. Also, do a Spotlight search for Logic Express to find any remaining LE files that you might want to delete . . . primarily preference files like the .plist mentioned above. Now restart your computer and try running the installer again.
Just an FYI, LE9 will indeed work in Mavericks. I used it briefly until I decided to get rid of Mavericks and go back to 10.8.5.

Downloaded the latest itunes update and now can not upen itunes. Help.

Downloaded update for itunes about a week ago, and now cannot open itunes. How do I fix this? Bob G.

Eureka, I found the problem with not being able to open itunes after last update. This evening received a prompting for an apple update for Quick time player. At first almost deleted it in my digust with apple since last update, but figured hey, could mess things up any worse, and so clicked yes. Apparently problem was with quick time which was also updated with last itunes update, as after that my itunes opened up. Appears to be lots of changes, but hey, can always learn them now that it is working.

5.5.3 and now difficulties connecting to remote speakers

Ever since the update to 5.5.3 I am having issues with my two airport express units which are both are set to stream music.
It often now takes iTunes quite awhile to connect to the remote speakers. Not always both. More often the one that is set up to extend the wireless network. And sometimes it just can't connect at all to one of the AE units and I have to toggle some setting on the unit to update it and then it works again. Seems that it just can't maintain a connection as well as before.
I'm running a 5 ghz network.
And after its all connected and running smoothly, the audio will often cut out. It has been years since I've had audio drop outs.
As well, if I awaken my iphone (which is connected to the same network) the sound will often cut out then. As if it stalls the music stream when another device hooks up to the network.
Anyone else seeing audio drop out issues since 5.5.3?

Yes, this problem is known since iTunes 9 and Apple does not fix it yet. I am ****** off. I have tried everything, change settings, restart both mac and Airport, change settings of wireless connection, but still iTunes connects to speakers randomly and today I can not connect, I am really ****** off!

Upgraded iTunes9 & Tiger and now can't choose remote speakers. Help?

Similar Messages

Maybe you are looking for