Upgraded mac 10.4.11 to snowleopard not enough memory

Hi
Reluctant and to poor to do away with my mac 10.6.8, i gave it all a spring clean, backed up the hard drive onto 'Lacie', then installed Snowleopard. fantastic! my computer working almost like new again. However... i could not install Mavericks - 'not enough memory'.
I can probably find more gunk in the machine (duplicate files etc), buy clean my mac.  what else?  is there a fixit for a not too geeky mac user?

You need 2 GBs of RAM or more to install Mavericks. It's not just a hard drive concern.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
      Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Similar Messages

  • Tried to put OS Mavericks on my mac, but not enough memory. Seem to be stuck and can't get back to my original set up. Any ideas how I get out of this. Thanks.

    I tied to install OS Mavericks onto my mac and now find there is not enough memory. Any idea how I get back to my original set up. Bit of a novice, so any advice welcome. Thanks.

    Not sure what you mean as it shouldn't have installed at all if it didn't meet the system requirements.
    But here are some step by step instructions to revert.
    https://discussions.apple.com/docs/DOC-6162

  • How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system.  Not enough memory to upgrade.

    How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system.  Not enough memory to upgrade.

    You can't.  iCloud is not for general file backup from a Mac. It's for backup up and syncing data between mobile devices and and Macs and  The following is from this Apple document: iCloud: Backup and restore overview.
    iCloud automatically backs up the most important data on your (mobile) device using iOS 5 or later. Once you have enabled Backup on your iPhone, iPad, or iPod touch .....
    What is backed up
    You get unlimited free storage for:
    Purchased music, movies, TV shows, apps, and books
    Notes: Backup of purchased music is not available in all countries. Backups of purchased movies and TV shows are U.S. only. Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or iBookstore.
    Some previously purchased movies may not be available in iTunes in the Cloud. These movies will indicate that they are not available in iTunes in the Cloud on their product details page in the iTunes Store. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.
    You get 5 GB of free iCloud storage for:
    Photos and videos in the Camera Roll
    Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
    App data
    Home screen and app organization
    Messages (iMessage, SMS, and MMS)
    Ringtones
    Visual Voicemails
    But not from a Mac.  If you want to backup your photos and other important files I suggest you get an external hard drive and use  it with Time Machine.
    OT

  • I just upgraded to Yosemite. Now when I try to open Excel, I get a message that there's not enough memory.  When I check the storage under "about this Mac" it says I have 150 GB of 249 GB.  Help please.  Thanks

    I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory.  I can open other documents.  The document I can't get to is the spreadsheet of my passwords.  Go figure.  When I check the storage under "about this Mac" it says I have 150 GB of 249 GB.  I have a MacBook Air.  Help please.  Thanks, Connie

    I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory.  I can open other documents.  The document I can't get to is the spreadsheet of my passwords.  Go figure.  When I check the storage under "about this Mac" it says I have 150 GB of 249 GB.  I have a MacBook Air.  Help please.  Thanks, Connie

  • K recent upgrades my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

    I recent upgraded my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

    I recent upgraded my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

  • My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr

    My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr

    Hello Pushtheriver,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iCloud storage issues:
    Get help using iCloud storage
    This may also help:
    Understanding iOS device capacity
    You can sync and download many different types of content on your device. Some types of content (such as music and videos) typically take more space than others (such as notes and books). The amount of space taken by an app depends on the app's purpose; complex or graphically intense apps usually take more space than simpler apps.
    If your device is near its capacity, you can remove some of the less used content to make room for more.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • When i try to open excel in mac I receive a message that there is not enough memory. Why s this?

    when i try to open excel in mac I receive a message that there is not enough memory. Why s this?

    As Excel is not an Apple product, I believe you will get more useful help by using Microsoft's support community for Office:Mac here:
    Office for Mac forums
    They are as active and helpful as these, and sometimes employees from the MS Mac Business Group are available for helping.
    Be sure to show which version of Office:Mac you have when posting there. It can make s difference in advice offered.

  • I am getting disc full messages on my Mac, unable to empty trash because not enough space, how do I proceed or do I need to increase my 4gig of memory

    I am getting disc full messages on my Mac, unable to empty trash because not enough space, how do I proceed or do I need to increase my 4gig of memory in which case how do I go about this process.

    You are confusing RAM (Random Access Memory) with hard drive data storage space.
    Your hard drive storage is getting too full if you can't empty your Mac's main trash.
    Here are some general tips to keep your Mac's hard drive trim and slim as possible
    You should never, EVER let a conputer hard drive get completely full, EVER
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your Mac's Trash icon in the Dock?
    ( as you mentioned, you can't empty this as your hard drive is too full.)
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    To find other large files, download an app called Omni Disk Sweeper.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

  • I upgraded my iCloud storage but my phone didn't upgrade. My phone keeps telling me not enough storage. Help.

    I upgraded my iCloud storage but my phone didn't upgrade. My phone keeps telling me not enough storage. Help.

    Confirm that you have no big icloud backups from your iOS devices
    @icloud.com email is a big scorer too.
    if you have many, many emails on icloud.com.
    you probably should delete some of them or forward to a different email address you have. and afterwards delete those mails to have storage released
    iCloud Storage depends mainly from iCloud Backup of iOS Backups, Mail Storage, Documents in the iCloud
    contacts, calendars and notes are mostly not that big for storage as you might think.
    music, apps and purchased items from itunes / appstore are not involved for calculation of icloud storage and they are not included in iCloud Backups of your iOS Devices.

  • Why does my Mac keep telling me that there is not enough memory when I need to open Excel?

    I have Excel installed on my iMac.
    I only use this rarely, mostly when I have grants to write for my students.
    When I try to open Excel, to look at an old document, I get the message that there is not enough memory, even though my Mac right now has 74 GB available.
    I really, really, really need to access these files, so am hoping for an answer to this puzzle!
    Thanks so much!!!

    OK, so here's what I did.
    First time, I reinstalled Office: 2008.  It must have sent the first one to the trash, because there were 9200+files in the trash once it was finished.  It looked for updates but didn't tell me that it needed any, so I tried to access Excel again, but got the same error message.
    So, then I dragged the whole Microsoft Office 2008 to the trash (it is still sitting there----question about this, too).  I reinstalled the whole thing again, but this time, it identified 3 updates that also needed to be installed.  I did that, and now, I am able to open Excel!
    Now my question about the trash:  if I empty the trash, am I going to lose all the files (especially worried about all the Word documents) that I had used the original one for, or, are all those documents, and the Excel files, still  there after the trash with the original Office 2008 is emptied; I wasn't able to only drag Excel to the trash so had to drag the whole thing.
    Am thinking that somehow those updates were never applied, which is very puzzling, because the first time I reinstalled, it didn't say anything about needing updates, but the second time, it did.
    Thank you!

  • CS3 & 10.5.2 unjustified "not enough memory (ram)" error

    This problem occurs when I use particular functions, usually colour related ones (eg. the colour sampler, using the colour palette and 'select by colour'). It also occurs at random. It seems to get more frequent as I use photoshop for longer.
    The error "Could not complete your request because there is not enough memory (ram)" pops up, often several time in a row. It is extremely irritating, and means I cannot use said functions.
    It is not the case that I have insufficient available ram, because the program will execute much more complicated functions. It handles vast drawings with fifty layers, but then cannot change the colour of the paintbrush in a small jpeg.
    I downloaded the latest Leopard update, which has not solved the trouble. I have also searched and searched, and can't find any other examples of a similar problem to suggest possible solutions.
    The details of my system etc. are below:
    Photoshop CS3 version 10.0, 30 day trial version, downloaded 4 days ago.
    MacBook Pro, about 6 months old. Running Leopard verson 10.5.2, updated from 10.5 yesterday. Processor 2.4ghz, ram 2GB
    Any help or suggestions would be very gratefully appreciated. I'd like to buy PS CS3 but not if it won't work properly on my Mac.
    Thanks

    I'm using windows xp with 2g of ram and have the same problem... "could not complete your request because there is not enough memory (RAM)."
    I heard this might be related to file corruption or not enough ram. So I killed every running process on my pc except the basic/necessary ones, tried to open a 87k image and i still get the same error message.
    I opened the image in windows fax/previewer, copied and pasted a screenshot into photoshop, saved the image as jpeg (with under 100k file size) and I still get the same error message when I try to reopen it. Reinstall did not work. Duplicated this on another pc. Adobe support knowledgebase was worthless for this issue.
    Seems like Photoshop is using up RAM and not letting it go like it should. I would not think that Photoshop requires almost 1mb ram to open an 87k image.
    Anybody find a solution for this besides upgrading a few hundred dollars worth of RAM to open only one 87k jpg?

  • There is not enough memory error with 8gb installed

    Description:
    I'm getting an error when trying to copy or cut a collection of basic shapes in CS6 on Mac OS X 10.8.
    It reads:
    There is not enough memory to complete the operation.
    To increase available memory, close other open documents or applications.
    But when i check activity monitor there is plenty of memory available. I can succesfully copy a smal(ler) amount of shapes.
    Steps already taken:
    Tried copying after a system restart with no other programs running.
    Tried adding more memory (i had 4gb originally, I just upgraded to 8gb).
    I reinstalled Flash
    I tried the same procedure (copying the same amount of shapes) on another machine with a similar amount of RAM and this works fine.
    Is there a way you can allocate more memory to flash, or is this some setting that i'm missing?
    Any help would be greatly appreciated!
    P.s. I read this thread http://forums.adobe.com/message/3609214#3609214, and my problem is only different in that i don't have some huge files i'm dealing with. The .fla is only ~10mb.

    Thanks for chiming in Mataxia.
    One thing you can try is selecting the layers that have the shapes you want to copy. Then right click and choose copy layers. In my case this works even though selecting just the shapes (instead of the layers) will cause the memory error.
    I'm using this as a workaround, but i can imagine that this isn't of any help in all cases.
    This confirms my suspicions that this is a bug in flash. Would be great if someone from Adobe were reading this...

  • We could not complete your Music Store request.  There is not enough memory

    I have been using iTunes successfully on my PC, Mac Mini and MacBook Pro. I upgraded to the latest iTunes on my MacBook and Mini and then bought an album. iTunes on my MacBook asked me to authorize the computer (which it was already, weird). When I tried to do this, I got the following error:
    We could not complete your Music Store request. There is not enough memory available.
    There was an error in the Music Store. Please try again later.
    Every time I try to authorize after getting this message, my authorization number goes down from 5 to 0. What gives? This was working yesterday.

    I have this same problem. It's like it is not Authorizing this Mac.
    What happens when you try to listen to a preview on the Music Store?
    Mine asks me to authorize again and gives me the error exactly as you said above.
    What happens when you try to view your account information (in Music Store, click on your account name in the top right corner)?
    Mine lets me authorize sucessfully and shows me my account information.
    I have emailed iTunes support about this and they replied with a generic answer about Deauthorizing and re-authorizing the computer.
    I even tried, to no avail, the tips here...
    http://discussions.apple.com/thread.jspa?threadID=471237&tstart=30
    If anybody reads all this and has any new info for us, please take the time to post it here!
    PowerMac G4   Mac OS X (10.4.6)  

  • Illustrator CS3 - "Not enough memory to place the file."  Help!!!???

    I have a new machine running XP Pro 64.  Intel i7 processor, 12 gb ram.
    I am trying to place a fairly small Photoshop image (with layers) into Illustrator CS3.  I have done this countless times with XP 32 bit os.
    But now, I cannot place even a small Photoshop image into Illustrator... I keep getting the error "Not enough memory to place the file."
    I tried the suggestion of 'right-clicking' the Illy launch icon and going to properties/compatibility and then selecting "Run this program in compatibility mode for..."  and then I check marked Windows XP.
    Someone else said this worked in Vista 64.....but it DID NOT work for XP 64.....dang it.
    Any suggestions???
    Thanks

    On Mon, Oct 26, 2009 at 04:37:08PM -0600, Todd-sta uttered:
    Well..... I just tried the same function on my 64 bit Leopard operating system on my MacBook Pro just for kicks.  Worked flawlessly!!
    So, why won't it work on XP 64 bit? Is this a case of 'the mac os is just better?"
    Talk about flame bait -- You trying to start the platform wars again? ;-D
    Can anyone tell me if they can place a Photoshop image from WINDOWS 7 64 bit OS into Illustrator without issue?  We're talking 'PLACE' .... not paste.
    Don't know about Windoze 7; but that operation works in Vista x64. XP x64 is
    quite flaky at times. It was never finished IMHO.
    Sure would like to know.  I'd upgrade if it made the difference.
    LOL
    end

  • Not Enough memory to open the Illustration

    Hi,
    I saw in the site http://kb2.adobe.com/cps/832/cpsid_83270.html
    that below problem exist. Is that been solved. Is there any alternative way to perform the action.
    Error "Not Enough memory to open the Illustration"  when opening a placed image InDesign CS4 with Illustrator hidden
    Thanks
    Karthik B

    Firstly, you may apply free to try product, it would repair your problem illustrator file and to import it to new .ai file with saving all content. This tool is named Illustrator Repair Toolbox. Prove it for free from here: http://www.illustrator.repairtoolbox.com/
    This solution from adobe blog
    Make Illustrator visible.
    This issue appears only on Mac OS 10.6.x. The error message sometimes occurs when you drag files from the Finder to the Illustrator icon in the dock. The error can also occur when you right-click an Illustrator SmartObject in Photoshop and choose Edit Contents.
    As ultimate measure you have to upgrade your MAC OS.

Maybe you are looking for

  • Getting parameters from a frame (JSP)

    Hi all, I am trying to retrieve the url in the adress bar, from within a frame. Lets say I have three JSP files, FRAME.JSP includes TOP.JSP and MAIN.JSP. if I call the method request.getParameter('toto'); from within MAIN.JSP I am only looking in the

  • How to calculate a rolling average within SQL Server Compact

    There are at least a dozen ways to skin this cat in regular SQL Server, but I am trying to solve this problem within the limitations of SQL CE. I have a table of stock values: Stock, Date, Open, High, Low, Close and I want to add 1 column "RollingAVG

  • EJB and WebLogic

    I am quite new to weblogic. I created very simple application, stockonline using ejb in weblogic. The compilation and package were OK. But when I deploy ejb jar name stockonline-core-1.0.jar in weblogic, I always got the same error Exception:weblogic

  • Why does Firefox display my homepage as a list rather than with the normal graphics?

    This problem also occurs when I open a new tab and input my homepage web address (www.rr.com)

  • Problems with uninstalling and upgrading rescue and recovry

    i have ThinkPad T61 with XP SP3. i am trying to uninstall R&R version 4.1 in order to upgrade it to version 4.23. when i try to uninstall or run the new version setup i get that the following files are missing: C:\DOCUME~1\ABIREN~1\LOCALS~1\Temp\{F15