Upgraded Mac OS to 10.5.8, now Photoshop 7.0 won't open

I reinstalled the program, and still it gives me the message "An unexpectd and unrrecoverable error has occurred because of a program error.  Photoshop will now exit" when I try to launch it.  Any ideas abou t what the problem is and how I can fix it? 

Hi  Thanks I will try it,  I havent reloaded elements yet, I really need photoshop  as I am a designer and use it alot for photos & need it right now, I have the CS5 Suite but it will not let me run it on this mac, it ask for intel processor  and I have been unemployed for over 2years and cant affiord a new MAc right now , that is why I am so frustarated  with the whole issue, it all started when I went to  up grade to 10.5.8.
Patricia Bruhn
Graphic Designer
860-916-8371
Date: Fri, 13 Apr 2012 12:14:34 -0600
From: [email protected]
To: [email protected]
Subject: Upgraded Mac OS to 10.5.8, now Photoshop 7.0 won't open
    Re: Upgraded Mac OS to 10.5.8, now Photoshop 7.0 won't open
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Thank you PatriciaBruhn unfortunately the error is a bit generic.  The best I can offer would be for you to try the steps listed in Troubleshoot system errors, freezes | Mac OS 10.x | Adobe software - http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-f reezes-mac.html.  These are generic troubleshooting steps and are great when the exact cause of the problem is unknown. I am not sure if the time and effort of going through the steps will be useful though as you may still run into difficulties.  I might also suggest trying Photoshop Elements 10 - http://www.adobe.com/products/photoshop-elements.html or Photoshop CS5 - http://www.adobe.com/products/photoshop.html and seeing if either one of those fit your needs.  Depending on what you use Photoshop 7 for you may find that Photoshop Elements can do the job plus have additional capabilities not even thought of during the time of Photoshop 7's development.  Both Photoshop Elements 10 and Photoshop CS5 have a minimum system requirement of 10.5.8 so as long as your system meets the remaining requirements then they should work fine on your computer.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4333279#4333279
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4333279#4333279. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
  For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

  • I recently upgraded my mac OS from 10.4.8 to 10.6 and now my PS CS3 won't open, why?

    I recently upgraded my mac OS from 10.4.8 to 10.6 and now my PS CS3 won't open, why?

    You won't be able to buy Pages from the Mac App Store on 10.6.8. You need to reload it from the original source.
    (109924)

  • Upgraded to Mountain Lion-now my yahoo messenger won't open upon log-in. Please help.

    Upgraded to Mountain Lion-now my yahoo messenger won't open pon log-in. Please help. I have searched queries re: this problem but the previous convo here re: this issue won't resolve my problem. YM icon is just a "question mark' upon opening my laptop. I have tried unchecking my YM in "system and preferences' but issue still isnt resolved. Appreciate the assistance. Thanks!

    Csound1 wrote:
    John Blanchard1 wrote:
    Are you not able to select AirPrint from the menu that lets you select the PPD?
    Do you have the latest firmware?
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4110396#N222
    Airprint is for IOS devices and thus has no relevance to this issue.
    Connect the printer to your Wireless Network and use Bonjour to detect nd connect it.
    That's wrong. AirPrint is not just for iOS devices. Since HP doesn't provide drivers for this printer, they say to use AirPrint:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03425022&cc=us&dlc=en&lc=en &os=219&product=4110396&sw_lang=

  • I updated Adobe Flash on my Mac and now my solitaire app won't open.  No error message, just -600.

    I updated Adobe Flash on my Mac and now my solitaire app won't open.  Message just says 'unable to open' -600.  I tried to reinstall Full Deck Solitaire, but the app store says it is already installed, so I can't do it that way.  What should I do?  There's nothing in Help that helps.

    Please restart the computer and try again. If it won't restart in the usual way, force a shutdown by pressing and holding the power button for a few seconds. Then press it again briefly to restart.

  • TS1363 Just upgraded to iTunes 11.1.4.62 now my device (iPhone5) won't sync but shows up under Windows Explorer.

    Just upgraded to iTunes 11.1.4.62 now my device (iPhone5) won't sync but shows up under Windows Explorer. When I plug the phone in it asks if I want to trust the computer. I say yes but it hasn't asked me that since the very first time I received the phone.

    This resolved my issue.
      Thank you for the suggestion. This worked for me. No more trust this computer messages and itunes now recognizes my ios7 iphone.
    Reinstalling the usb driver in win7 by going to device mgr/ portable devices and then directing the computer to search the apple folder ...
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. did the trick.

  • I can't export my video which contains only photos, sound tracks nor play it in fullscreen iMovie it shuts down. And now my whole file won't open at all it'll open with nothing inside ??

    I can't export my video which contains only photos, sound tracks nor play it in fullscreen iMovie it shuts down. And now my whole file won't open at all it'll open with nothing inside ??

    I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
    I am running Yosemitie on a  iMac.
    Paul

  • We downloaded Office2008 update June 13th. Now our Office programs won't open. Is this happening to others? Does anyone know how to fix the problem?

    We downloaded Office2008 update June 13th. Now our Office programs won't open. Is this happening to others? Does anyone know how to fix the problem?
    This is the message box content we get when trying to open Word:
    Process:         Microsoft Word [309]
    Path:            /Applications/Microsoft Office 2008/Office/Microsoft Word.app/Contents/MacOS/Microsoft Word
    Identifier:      com.microsoft.Word
    Version:         ??? (???)
    Build Info:      Unknown-101117~0
    Code Type:       X86 (Native)
    Parent Process:  launchd [109]
    Date/Time:       2011-06-14 05:34:15.752 -0400
    OS Version:      Mac OS X 10.6.7 (10J869)
    Report Version:  6
    Sleep/Wake UUID: FDFC3F45-E8C8-4D18-A0C4-EA3C76AD2547
    Interval Since Last Report:          11753 sec
    Crashes Since Last Report:           14
    Per-App Crashes Since Last Report:   12
    Anonymous UUID:                      DDF6AE0D-E118-4768-9B04-8CDCB6D7C62E
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/MicrosoftComponentPlugin.framework/Versions/12/M icrosoftComponentPlugin
      Referenced from: /Applications/Microsoft Office 2008/Office/Microsoft Word.app/Contents/MacOS/Microsoft Word
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld

    You will need to contact Microsoft for a fix.  They also have a message board.  Post there if you cannot find an answer after searching their message boards. 
     

  • Reinstalled Tiger and now my iTunes library won't open.

    Hi. I reinstalled Tiger and now my iTunes library won't open. And I can't install the latest 10.5 version of iTunes on this Mac. How do I get an older version of iTunes that will run this library? Any other thoughts? Thanks!

    This is an issue alot are facing rightnow because the quicktime bundled with itunes is more "Up to date" for now than the stand alone is. Even when its removed some of its more updated registery keys are left behind.
    GO here and follow ALL steps for removing itunes and quicktime, apple updater and ipod updater EXCEPT DO NOT install itunes til you get to the bottom of the page http://docs.info.apple.com/article.html?artnum=93976

  • I just downloaded Mavericks and now my AutoCAD 2012 won't open. What do I do?

    I just downloaded Mavericks and now my AutoCAD 2012 won't open. What do I do?

    Autocad 2012 is NOT Mavericks compatble.
    So, you either need to find and pay for an upgrade AutoCad 2013 which is compatible with OS X Mavericks or pay to upgrade to AutoCad 2014.
    If you have a cloned backup of your previous system before upgrading to Mavericks, it would have been easy to revert back to your previous OS X version.
    If you don't have a previous backup, your only option, now, is to create a backup of your system and important data , now, to an external hard drive. Once you have a backup, you need to purchase and clean install OS X 10.8 Mountain Lion (if you haven't purchase Mt. Lion already).
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
    AutoCad 2012 is compatble with OS X 10.8. You'll have to reinstall all of your applications including AutoCad.

  • Now Up-To-Date won't open in Mavericks

    After upgrading to Mavericks my calendar in Now Up-To-Date won't open.  Does anyone have a work-around?  How can I go back to OS 10.8.5 so I can see what my life is supposed to be in the next few months?

    Thomas A Reed wrote:
    Parallels seems to believe differently
    Parallels' customer support "believes" differently.  Parallels' legal department knows better!  You will not be able to find and link to me any official Apple statement that such uses are a Snow Leopard EULA violation.
    It is convenient for Parallels to continue to promote that Urban Myth for reasons that I am not allowed to describe on this forum.
    That being said, I have openly promoted the ability to install and run Snow Leopard client in Parallels for over two years now, including posts on the Parallels Support Forum, this forum and elsewhere.  If it really were a Snow Leopard EULA violation, these posts would have been taken down long ago...
    https://discussions.apple.com/message/18280105#18280105
    http://forums.macrumors.com/showthread.php?t=1365439
    That all being said: now that Apple has made Snow Leopard Server available for a 95% discount to most users, for them, the issue is moot.  To those unable to acquire SLS or unwilling to do so, the ability to install and operate Snow Leopard client within Parallels continues to exist...

  • Updated to Yosemite, no problem.  now iPhoto and iMovie won't open.  Says I need to update software however, when i try to update indicates my User ID and PW won't work for these two pieces of software.  User ID and PW works everywhere else.

    Updated to Yosemite, no problem.  now iPhoto and iMovie won't open.  Says I need to update software however, when i try to update indicates my User ID and PW won't work for these two pieces of software.  User ID and PW works everywhere else.

    I am having the same problem.  I even changed my password and updated all of my security information.  Now it just gives me an error and retry message, which of course also does not work.  Went to support and was going to open a chat (seemed the simpler option) and received a message that my support has expired for this serial number unless I want to pay $29.00.  So I chose the option to call later, which was the exact time suck I was trying to avoid.  Why wouldn't the new operating system also update the apps that were already part of my old platform?

  • While taking photos my iphone's battery died, now my photos app won't open and I can't save any pictures taken or downloaded. Please help.

    While taking photos my iphone's battery died, now my photos app won't open and I can't save any pictures taken or downloaded. Please help.
    Also, I can't import my photos to my Windows 7 PC.

    Try rebooting your iPhone (holding the home button and sleep/wake button together until the apple logo appear)

  • I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

    I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

    You're welcome. 
    But, no, don't look to  Epson for fixes to their  driver in newer versions, and Adobe has deprecated the TWAIN plug-in.  Hoping for a solution there is futile.  That has not happened and it's never going to happen.  The consensus is that it's pretty foolish to tie up Photoshop to scan.  Honestly.
    Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
    You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever.  When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software.  If you think about it, its most inefficient.
    VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist.  VueScan is not free, but it's a pretty good value, IMO.
    As for the Epson CD printing software, I have no clue.  Sorry. 

  • I Just updated the software of my iphone 4s thru phone, now the photo application won't open... Please help me what to do?

    Hi! I'm Ralph.. Just updated my iphone 4s from 6.1.2- 6.1.3. ... Now the photo application won't open... Please help me what to do

    Why would this be covered under warranty?  There is nothing wrong with the device, it simply needs to be restored.
    As already stated twice in this thread, disable ALL security software on the computer and restore the device.

  • I just updated my iPad with os7.0.4 now the apps store won't open

    I just up dated my iPad 2 with os7.04 and now the apps store won't open
    Help?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

Maybe you are looking for

  • This is in regards to to the flash player version 11.6

    well i was wanting to know how do i exactly fix my flash player so i can see any videos play the right way, this flash player 11.6 version is messing up really bad so if any can help me fix this i would appreciate it.

  • How can i save separate layers in photoshop elements 10, after i've laid them out as i want?

    i'm preparing photographs for an animation sequence that i'm planning to develop in adobe premiere 10.  now that i have the layers as i want them in photoshop elements 10,  i want to save them to a folder to import them into premiere and laid them in

  • Unable to see Youtube videos after upgrade to SL

    Hi All, After upgrading my MacBook Pro to SL from a recently installed and very clean (and updated just 2 days ago) Leopard system, I suddenly cannot watch any youtube videos at youtube.com Where the video should be it is all pitch black. Right click

  • [SOLVED] kid3 2.1-1 crash

    Hi, When open kid3 in a shell: kid3 kid3: error while loading shared libraries: libchromaprint.so.0: cannot open shared object file: No such file or directory Last edited by ugaciaka (2012-05-13 12:48:33)

  • Removing the _adf.ctrl-state

    I am using an unbounded task flow. I dont want the session information to pass to the forwarding screen. _adf.ctrl-state should not appear in the url after forward. Is there any way to do that ? Thanks Suneesh