Upgraded Mac OS X to 10.8.4, Flash Builder cannot launch application

I've update the JRE to Version 7, and added it to Flash Builder, but I when I run, nothing happens, when I debug, I get the following:
The Flash Builder debugger failed to connect to the running application.
Ensure that:
          1. For in-browser applications, you are running the debugger version of Flash Player.
          2. For network debugging on a mobile device, you have a reliable network connection to the device, and port 7935 is open on your machine's firewall.
              Device connection help
I am running the latest debugger, the only change that was made was upgrading to Mountain Lion from Lion.
Joe

I'm pretty sure this is down to the Java version but I could be wrong, download this version and re-launch Flash Builder, making sure that the java version your system is running 6 and not 7 after you've installed java 6.
http://support.apple.com/kb/DL1572

Similar Messages

Upgraded to Mac OSX Lion, have an issue with Flash Builder 4.5.1 and Flex SDK 3.2

Howdy, I upgraded my mac yesterday to 10.7, and have run into an interesting problem.
I was using Flex Builder 3 before, using Flex SDK 3.2. After upgrading, I found that Flex Builder 3 is not compatible with Lion anymore, so I had to upgrade to Flash Builder 4.5.
This is fine, I just figured I would add the Flex 3.2 sdk, which I did. However, after adding my project to the workbench for Flash Builder 4.5, I see the following error:
http://cl.ly/3J3W0E22402G2I1L2U1Q
However, as far as I can tell, the following two screenshots mean I have installed the Flex 3.2 sdk:
http://cl.ly/1S0l1m2u1Z0z053Y3U29
http://cl.ly/3c3k2B161K1d1y2H332P
Does anyone know if this is even possible to do? I need to get back into development ASAP. If I can get Flex 3.2 SDK working in this environment, I am pretty sure I will be good to go.
Thanks so much!
Andrew

I can't help you with your problem, but maybe this is a good start:
http://kb2.adobe.com/cps/905/cpsid_90508.html#main_Flash_Builder
..... About that... have you encountered any other issue when using FB 4.5.1 with OS X 10.7.0?

After upgrade CUOM/SM from 2.1 to 2.3, I cannot launch CUSM.

Dear Experts.
I recently upgraded CUOM with SM in same server from ver 2.1 to 2.3, and changed IP address and Hostname as well.
I am new to this Cisco management system, I have a few question and need your help.
1.     After upgrade, do I really need to re-register 1040 Censor by uploading new image ? is it compulsory after upgrade ?
2.     I did re-discover, but it took a lot time, is it normal behaviour to re-discover with 3 CCM, 3 GW and 1 Unity ?
3.     I have 1000 license and this l saw error message sometime saying that my license number is not enough.
        We have more than 1000 IP Phone, so is this number of 1000 license consumed by all IP phone ?
4.     After changing hostname and IP address, I cannot launch the CUSM from dash board, but can launch from CiscoWorks.
        I think I did all necessary step of changing IP address and hostname, but I don’t know why I cannot launch from dashboard.
       Can someone guide me how to correct this issue ?
Kindly help me on this issue, thanks in advance.
Jason

Hi and welcome to Discussions,
have you any non-Apple BootCamp Drivers installed or replaced, like for the graphics card for example ?
If so, the uninstall them, either through the 'Software'-Panel in the Control Panel or in the case of graphics card drivers with DriverSweeper http://www.guru3d.com/category/driversweeper/
Also, a checkdisk run http://en.wikipedia.org/wiki/CHKDSK might be helpful.
Regards
Stefan

I have flash builder standard 4.7 for windows. Need the Mac version but can't find it

Hy Guys, I have flash builder 4.7 for windows. I want the Mac version, the problem is that my flash builder is standard and I only find the Premium version for MAC OS, What can I do?
Thanks in advance

download the pro version and enter your serial number. it may activate to the standard version.

Flash Builder 4.7 Upgrade license rejection

I recently purchases an upgrade license for Adobe Flash Builder 4.7. The installer accepts my new serial number but then indicates a qualifying product cannot be found to upgrade. It allows me to specify Adobe Flash Builder 4 Standard, and enter my old serial number, but subsequently rejects it with the following error message.
"This serial number is not for a qualifying product. Please try another."
I have tried live chat support multiple times only to be told it is not available. I have a valid licesene, so how do I get around this problem?
Note: It does this regardless of whether I try to install cleanly or on top of my older version.

I have the same problem, and i have send request complementary upgrade (Adobe® Flash® Builder® 4.7 Complimentary Upgrade), and only received a Acrobat change licensed...
I´m working with 4.7 Beta the last mounths, and now all the days have to see "please enter your license". So one problem that you can jump with money (if you have that money..), isn´t a problem. Like a i have license from flex 3, upgrade to flex 4, and upgrade to flex 4.5, i´m going to take de upgrade from 4 standard to 4.7 standard (47,97 euros), and not waste my time and money on calls. So yes, I'll see adobe with another eyes...
Best regards,
José Ramón León

Please suggest me use BlazeDS with Mac OS X, Glassfish v3, NetBeans 6.9 and Flash Builder 4

I new user in Java. Please tell me example step by step how to use BlazeDS on Mac OS X, Glassfish v3, NetBeans and Flash Builder 4
I test follow
http://sujitreddyg.wordpress.com/category/flex-and-blazeds/
until i Connect to Data/Service my Flash Builder 4 said like this :
how i can make it work?
Thank for answer.

OK, the latest SVNKit only support Subversion 1.6.5 (http://svnkit.com/documentation.html), so Subclipse 1.6 is the latest version supported.
Rats. I'll have to use a separate svn client just to work with Subversion 1.7 repositories.

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine.
installed new internal disk first with fresh 10.7.3 Lion software. Also upgrade ram to 4GB. Work great, super fast.
BUT.... my WD 1TB firewire400 external disks no longer work with the Lion enabled machine now.
FURTHER... I read somewhere that WD is problematic with Lion but Seagate was not... so I went and bought a new 3TB Seagate GoFlex.
When it didnt work properly either, I patiently searched and found a software/firward upgrade and applied.
I re-partitioned disk to extened/journaled standard, etc.
Then assigned the particition to Time Machine. Drive turned the blue/grey color, so I thought it would work.
But, it has now been in "preparing" mode in Time Machine for HOURS....
What is up Apple? So dissappointed. Ive read these type of problems are notorious with Lion and I wish I never upgraded.
Are you trying to make issues with External disks, to drive people to iCloud? That trick ont work in me. I will not reward bad behaviour Apple.
Please provide a fix... I wasted hours/days screwing around with this, instead of using the Mac for what its intended!

Solved by Pondini, on another thread I opened...
Answer:
Sounds like either:
A directory problem on your internal HD. Verify your internal HD, and Repair any other volumes being backed-up per #A5 in Time Machine - Troubleshooting.
Something in OSX may be damaged. You've tried the "combo," so a fresh copy of OSX (that won't disturb anything else) would be worth a try (and you don't need a tech for that). See Installing the ''combo'' update and/or Reinstalling OSX.

I am trying to upgrade Mac OSX from 10.7.4 10 .7.5 .But, the grey screen is coming for hours. What should i do?

i am trying to upgrade Mac OSX from 10.7.4 10 .7.5 .But, the grey screen is coming for hours. I pressed the alt key and was taken to options viz. Restart to install MAC again, use time machine. I don't have back-up and so restarted to install MAC again. Can i cancel this now. I want my data to be secure. What should i do?

If you cancel an install there's no telling what state it will leave your Mac in. Let it finish or fail.
Then get a disk, it can even be a pocket drive if it's large enough and back up all your own data.
After that, boot up holding command-r keys into your Recovery Volume.
The screen should give you these choices...
Restore from TM backup
Reinstall Mac OS X
Get help online
Disk Utility
First run Disk Utility Repair Disk, if you get errors run until no errors reported or reports "the disk cannot be fixed". Then, choose Reinstall OS X.

Recently upgraded Mac OS to 10.5.5 - have an older G4 which is max'd out upgrade-wise - both processor and OS. At present Safari is 3.1.2. Itunes is 9.2.1. Itunes will not allow me to connect to store - says it requires Safari 4.0.3 - however, when I try

Recently upgraded Mac OS to 10.5.5 - have an older G4 which is max'd out upgrade-wise - both processor and OS. At present Safari is 3.1.2. Itunes is 9.2.1. Itunes will not allow me to connect to store - says it requires Safari 4.0.3 - however, when I try to download Safari 4.0.3 or newer it says it requires an older version of the OS. What to do?

Update v10.5.5 to v10.5.8
Download and install the combo > Mac OS X 10.5.8 Combo Update
Then restart your Mac.
That should update Safari for you to 5.0.6 and that should help with iTunes.
If necessary, after updating to v10.5.8, you can use the standalone Safari installer here > Safari 5.0.6 for Leopard

HT1222 how to upgrade mac os 10.5.6 to os 10.5.8

Hi,
how to upgrade mac os 10.5.6 to os 10.5.8.
Best regards,
Jeane Ekel

Do you mean 10.5.8 or... 10.6.8...?
If 10.5.8...
Go Here > http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
and Download and Install the Combo update.
Be sure to Restart your computer after the successful install.

Upgrade mac os 10.5.6 without disk

How can I upgrade mac os 10.5.8 to 10.6 over the internet.

Blacky888 wrote:
How can I upgrade mac os 10.5.8 to 10.6 over the internet.
You cannot.
Snow Leopard = OS X 10.6.x... It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...

Upgraded MAc pro to Lion now I no longer can open window office. any ideas?

upgraded Mac Pro to Lion, now no longer can use windows office. any ideas?

You need MS Office 2011 if you've installed Lion. Previous versions of Office don't work with Lion.

Flash Builder 4.7 mac , after upgrade to adobe air 13/14 wont create new projects

im running flash builder 4.7 on mac, and recently upgrade to a newer air, this was sad in itself as flash builder dosnt have a mechanism for doing this you have to paste files all manually all over the place.
Im now running into an issue where I cannot even create projects.
Has anyone had this issue? does anyone know how to solve?
Thanks

Called support had the pleasure of a really long wait time.
first level tech support stated this was a "known issue", got transferred to another sr technician who was going to fix this, didn't have a clue about the previous conversation and the call dropped. I don't have the patients to wait on hold nearly an hr again.
Adobe, if this is a known issue please post a sticky somewhere or assign someone to reply to the community posts.
If anyone else has the answer to this, that would be much appreciated, Im kind of loathing flash builder at the moment and resenting the fact i can't run flash develop natively on mac.

Upgrade Mac OS 3.9?

Is it possible to upgrade Mac OS 3.9 to a higher version on my iMac G5? I have checked for automatic updates by going into the apple icon drop down to "software updates..." but no Mac OS updates are suggested. Thanks in advance for your recommendations.

ETK719:
I'll research purchasing the 10.5 upgrade but I imagine that will be expensive. Do I purchase it through Apple or a third party?
As the previous poster indicated, you can purchase Leopard at Apple for $129. You may be able to purchase it for less at online sources such as Amazon. You will be purchasing the Full Retail Version, which would not include iLife 09 although it will include some earlier versions of applications like iPhoto and iTunes. If you purchase the boxed set it should include iLife 09. Check to be sure that it does.
What do you mean by losing "Classic Support" if I do the upgrade?
"Classic" refers to an emulator which runs OS 9 inside OS X. Some users have applications which need OS 9 or "Classic" to run. If you don't have any of those it will not be a concern for you.
Do you mean Apple will no longer provide technical support/help for my computer?
No. It means that the OS X 10.5x will no longer run those applications that need OS 9 or the Classic Environment. If you have AppleCare your hardware will still be supported by Apple, and Leopard will continue to be supported.
cornelius

HT5527 When I go to system preferences (to upgrade Mac OSX) There's no icloud icon. There's a mobileme icon that has an Account Status error. What do I do from here?

When I go to system preferences (to upgrade Mac OSX) There's no icloud icon. There's a mobileme icon that has an Account Status error. What do I do from here?

Note that the method for paying to continue your complimentary storage isn't entirely intuitive:
If you wish to continue your current storage level, the instructions are here:
http://support.apple.com/kb/HT5527
Scroll down to 'How do I purchase my current plan?' and expand the section applicable to your computer or device.

Upgraded Mac OS X to 10.8.4, Flash Builder cannot launch application

Similar Messages

Maybe you are looking for