Upgraded my iphone4s and iphone4 to os6 and when someone texts on my iphone4s line, the iphone4 receives it too! How do I fix this?

Can anyone tell me what might have happened? What do I do to fix this?

I've just found out, that it sounds fine on my iphone when played through headphones, speakers or even stereo, its just when i play it on itunes, it sounds funny like when it hits lows it goes quiet as if it cant handle them...

Similar Messages

  • When I drag a picture into my imovie it creates a thumbnail but when it plays over it, it shows the picture in front of it and not the picture...and when I go to crop adjustments it shows a black screen. How do I fix this?

    when I drag a picture into my imovie it creates a thumbnail but when it plays over it, it shows the picture in front of it and not the picture...and when I go to crop adjustments it shows a black screen. How do I fix this?

    I had a similar problem, and i found that the photo was of very low resoluton. As a test I resized the image to a lrager resolution using photoshop CS4 and re saved it as JPG. I imported the new saved image and it seem to have fixed the problem.

  • I noticed yesterday my Iphone 4s does not say verizon at the top anymore. I tried calling *228 and did both options mutiple times and it hasnt changed. Also when i go to settings general about the network tab says unavailable. how can i fix this

    I noticed yesterday my Iphone 4s does not say verizon at the top anymore. I tried calling *228 and did both options mutiple times and it hasnt changed. Also when i go to settings>general>about the network tab says unavailable. how can i fix this

    Can you make and receive calls and texts? If you can, I wouldn't worry about it. If you can't, you may need to call Verizon. However, try this first. The 4S has a Vodafone SIM card in it for foreign travel. Try taking the SIM out and doing the *228 again. Once it activates properly, you should be able to put the SIM back for safe keeping. It's not used in the U.S.

  • I have a 2nd generation iPod....I have switch on the OFF position and it will periodically turn on (thus draining the battery) by itself.  How can I fix this?

    I have a 2nd generation iPod shuffle.  Recently, after I turn switch to OFF position, it will turn on (green light flicks on) by itself periodically and obviously battery gets drained.  How can I fix this?

    I don't know of a way to fix an issue with the switch, if it's a hardware issue.  You can try doing a Restore on the shuffle in iTunes, to see if there's some software glitch.
    However, I often leave my shuffle with the power swtich in the ON position.  When you are not playing music, the shuffle goes into a "sleep" mode after about a minute.  You'll notice that you need to press the Play button twice to get it to play again; the first press wakes it up.  In my day-to-day experience, I don't notice any difference in battery life between the shuffle being OFF and ON (and not playing), even if I leave it ON overnight.  And keeping it ON avoids needing to constantly move the tiny swtich, and saves it from wear and tear.
    So, you might try just keeping the power swtich in the ON position, and pausing playback to "turn it OFF."

  • I upgraded to ios5 and now I can't log into my ipad with my password.  How can I fix this?, I upgraded to ios5 and now I can't log into my ipad with my password.

    I upgraded to ios5 and now I can't log into my Ipad with the password I had set and been using for the last 2 years.  What do I need to do to get logged in?

    You will have to format your iPad.  Looks like that's the only way to reset your password.
    Formatting your iPad
    Turn off your iPad, turn on iTunes, hold large button down on ipad while connecting the white ipad cord to your Pc.
    When the window prompts format iPad,let the button go and press format button on iTunes.
    That is how I solved the same problem.

  • I can't open .rtfd files with images. They disappear and when I send them to a PC the images are gone. How can I solve this problem? No other format works!

    When I make a document and add an image and send it to a PC as .rtfd the image and the format changes and disappears. But if I send from PC to PC an .rtfd file it comes out normal. I already downloaded the Quick Word App hoping that would solve the issue but it doesn't! What can I do to share files from PC to Mac and from Mac to PC without having the file change?

    So now that's two of us.  Hopefully, someone has an answer. 

  • Its like pop ups and ads are always open in like the backround and when i open a new tab i see like dozens of them. how do i fix this?

    it well looks like the pop ups are frozen into firefox or something. i uninstalled firefox 3 times to fix this and its still there. i dont even know how to properly describe it.

    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • I cannot send or receive SMS text messages and my number is not showing up in the 'Recieve At' location..how do I fix this?

    I just bought and activated a new Iphone 4s and I cannot send or receive normal SMS text messages. Also, my number is not showing up in the "receive at" location. Any help??

    Settings > General > Reset > Reset Network Settings
    Beyond that... since you state you've tried all "recommended fixes" have you actually restored as new and not from your backup?

  • HT4061 i updated my phone and now all it does is stay on the connect to itunes screen, how do I fix this?

    IOS 7 updated and now phone will not get off the connect to itunes screen

    Connect to itunes on your computer and see if it prompts you to restore or activate.  Try resetting the device by holding the sleep/wake and power button for 10-15 seconds then release.  If that pesky screen still shows you may need to force recover the device.  Power the device completely off, press and hold the home button and plug into itunes and do not release the home button until it says itunes has detected a device in recover mode.

  • I just switched from an Iphone 4 to an Iphone 5S and when my friends send me imessages they go to my old phone. how do i fix this

    I really need to know how to diconect my old phone from my phone number that way my text messages get deliver to my new phone

    Hey fa886!
    You will need to adjust your iMessage settings in your new phone using the information in the following article:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/ht5538
    Unlink a phone number
    To remove a phone number from an Apple ID, sign out of FaceTime and Messages on your iPhone:
    Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    This should remove your phone number from other devices using the same Apple ID with FaceTime and Messages. If the phone number is still available on other devices after you sign out of FaceTime and iMessage on the iPhone, you may need to sign out of iMessage and FaceTime on all your devices, then sign in to FaceTime and Messages again on devices you want to use.
    Note: If you no longer have access to the iPhone that is using the number you want to remove, reset your Apple ID password.
    If your previous phone is not using a different number, then you will want to simply sign out of iMessage on it in order to stop receiving iMessages. Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • When I click on Firefox in recent days, there's a long delay and then I'm told to click on the simplified sign-on. How can I fix this?

    Firefox always used to take me to my homepage - AOL. Now it doesn't unless I click on the simplified back-up access method.
    == This happened ==
    Every time Firefox opened
    == several days ago

    If you can't install on top of the current installation then you need to delete or rename the current Firefox program folder to do a clean install.
    It is possible that your security software is using or locking files, so you can try to temporarily disable that software during the installation.

  • Hi, I upgraded my iphone 4 to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tels that this device is not registered as part of the iphone developer programme. How could I fix this problem? Please..?

    Hi, I upgraded my iphone 4 (4.3.3) to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tells that "this device is not registered as part of the iphone developer programme." How could I fix this problem? Please help me...,

    I had a similar occurrence with my just activated iPhone 4.
    I had been using the phone for three days when an odd occurrence with voice mail caused me to call tech support. After some discussion they decided to push the activation to my phone (even though I had been using it for three days). When I went to power it back up again I repeatedly got the "no service" notification. I got tech support on a land line and we tried hard reboots and so on. No joy. They told me to take it in to the point of sale and either the SIM card or the phone needed (or both) needed replacing.
    I tried one last hard reboot after dinner and the phone came up with service, but I took it in to the point of sale in the morning and they swapped the SIM card out and I went to a Genius Bar appointment to get the phone checked out. It is supposedly OK, but I am still having some problems when syncing it so I will have to visit the Genius Bar again tomorrow about that. At least I have not experienced the "no service" problem in the roughly 24 hours since the SIM card was replaced. (Fingers crossed)

  • On a MAC G4, WITH OS 10.5.8, I DOWNLOADED 3.6.8, BUT I CANNOT INSTALL IT. IT SAYS I DO NOT HAVE SUFFICENT PRIVILEGES. WELL, IT'S MY COMPUTER AND I AM THE ADMINISTRATOR ON IT. HOW DO I FIX THIS PROBLEM SO I CAN INSTALL FIREFOX 3.6.8??

    On a MAC G4, WITH OS 10.5.8, I DOWNLOADED 3.6.8, BUT I CANNOT INSTALL IT. IT SAYS I DO NOT HAVE SUFFICENT PRIVILEGES. WELL, IT'S MY COMPUTER AND I AM THE ADMINISTRATOR ON IT. HOW DO I FIX THIS PROBLEM SO I CAN INSTALL FIREFOX 3.6.8??
    == I DOWNLOADED UPDATE 3.6.8

    Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
    Be sure to make a Backup of your Current System Before Upgrading...

  • I bought a mini mac that was returned to a store; when I try to open iPhoto it tells me I do not own a full copy of the software and prompts me to sign into an applied that is not mine. How do I fix this??

    I bought a mini mac that was returned to a store; when I try to open iPhoto it tells me I do not own a full copy of the software and prompts me to sign into an applied that is not mine. How do I fix this??

    Welcome to the Apple Support Communities
    That's a problem that all users of a second-hand Mac released after the OS X Lion launch have. OS X, iPhoto, iMovie and GarageBand are registered to the Apple ID the first owner used to register the computer, so you can't use them legally without repurchasing them. Furthermore, there's a bigger problem: you have to get iPhoto, iMovie and GarageBand on a DVD, because the App Store makes impossible to purchase these applications on a second-hand Mac.
    Nothing will happen if they are already installed, but you won't be able to reinstall and update them, so I recommend you to delete them and buy iLife '11 on a DVD to install the applications from there. Also, take note that you can't also reinstall OS X, so if OS X gets damaged, you will have to take your computer to an Apple Store.
    Open  > About this Mac, and tell us the OS X version you have. If you are using OS X Lion, you can upgrade to Mountain Lion with your Apple ID, so then you will be able to reinstall OS X

  • I have recently updated my CC programs to the latest version and now all of my files wont open by default into their respective programs, only if I open the program and go to file open and open the file from there. How can I fix this?

    I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
    I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anyway

    On Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
    But there is a plugin for ID that makes this possible. Never tried it myself.
    https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

  • HT1871 Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Could it be because the SIM card got damaged while I cut it to fit the IPhone?
    Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
    Or somehow the Chinese carrier found out and locked it?
    No, which is not possible.
    What can I do? Get a new SIM and see if it works again?
    Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget.

Maybe you are looking for

  • SRM PO- BBP_DOC_CHANGE_BADI - Code not effective when the SRM PO is created

    Hi Experts, We are using SRM 5.0 Classic and Extended classic scenario and the SRM local PO(Extended classic scenario) is created for special cateogries only. The SRM Local PO is created automatically after the SC is completely approved. The SC(one l

  • Oracle 9.2.0.6 client JDBC OCI driver compatibility issue with JRockit 1.4.

    I have weblogic server 8.1 sp4 running on Linux E3.0 using JRockit 1.4.2_5. I cannot seem to get the Oracle driver ojdbc14.jar to work. Yes I have added $ORACLE_HOME/bin to my classpath prior to any weblogic classes, I added $ORACLE_HOME/lib and $ORA

  • Computer name keeps getting (2) appended to it.

    I've searched high and low and can't seem to figure out why my iMac thinks the computer name is already being used on the network. I can see in the sharing preference pane that the original name is what is indicated with this copy: Computers on your

  • Trite X11 ?

    This :doug-penningtons-power-mac-g4:~ dougp$ Xquartz -version Xquartz starting: X.org Release 7.2 X.Org X Server 1.3.0-apple22 Build Date: 20080821 plus X11.app 2.1.5 plus OS X 10.5.5 is what I have. I read this which explains some things: http://bor

  • Console application keeps crashing

    The console app seems to be crashing frequently on my MBP. Deleting the plist file and repairing permissions resolves it for a few days. Any thoughts ? The crash log: Process: Console [515] Path: /Applications/Utilities/Console.app/Contents/MacOS/Con