Upgraded my mac to yosemite and my toshiba backup will not run

I upgraded my Macbook Pro (June 2012 model) to Yosemite and now my Toshiba /backup will not run.  I can see it when I attach it and am able to open the file.  The last backup was in November 2014. Is there a fix or do I have to purchase another backup drive?

Custom will show automatically as soon as you just edit some options. So just go ahead, you don't need to select "custom"

Similar Messages

  • I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?

    I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?

    Custom will show automatically as soon as you just edit some options. So just go ahead, you don't need to select "custom"

  • The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive.  I cannot find any place to tell me who to CALL to ask for a replacement!

    The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive.  I cannot find any place to tell me who to CALL to ask for a replacement!

    Hi Samcat,
    You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
    Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

  • I upgraded my iphone 4 ios and now my phone will not restore -, i upgraded my iphone 4 ios and now my phone will not restore -

    i upgraded my iphone 4 ios and now my phone will not restore -

    I have run into the same problem. 
    1.  I was sharing the same itunes account with my wife for both of our iPhones 4s.  She upgraded her phone to IOS7 two weeks before I did.  After I did we ran into problems with messaging.  Because we shared itunes account, both iphones were linked.  When I sent text messages to someone, she got a copy. When they replied, she got a copy.  I tried several ways to remove her phone from my profile, but would not work with new IOS7.  I had to create a seperate itunes account for my phone in oirder to do so, as recommended on several help forums.
    2.  I backed up my phone onto itunes before setting up seperate itunes account.  It showed that all the photos, contacts, notes, apps, etc. were synced and backed up.
    3. I logged off itunes (former shared account- now wife's account), logged into new itunes account, and proceeded to restore my phone, while logged into my new itunes account, thinking this would delete my wife's phone from the profile as shared devices.
    4.  Phone would not restore by automatically syncing with itunes, by selecting back up recovery file to recover, or even by deleting everything and starting fresh as if it were a new phone, then trying to restore the data file as if it were recovering the backup info onto the new phone.
    5.  I get the same **** initialization loop sequence on the iphone every time, even after itunes goes through the recovery process, syncing all data, etc., multiple times.  The iPhone loops through the grey screen "Welcome" in different languages, then asks which wireless server I want to connect to, enter passcode, then asks if I want to set up phone as a new device, backup from iCloud, or from iTunes backup.  It does not matter which I select.  It prompts me to connect to iTunes again.  The point is, I have already been through these procedures and the iPhone cannot get past this point and enter run mode, showing me a screen with all my recovered settings. 
    For time being, just to have a functional phone, I have had to delete everything off the phone and set it up as a new device, back to factory settings. Then the phone will get past this and enter into run mode showing screen and apps with factory settings, no contacts, no email ( have to set up again), no voice mail ( have to reset).
    Any ideas on how to over ride this reset mode in the iPhone, when all I want to do is download and recover settings from a backup in iTunes to the device?

  • I upgraded from leopard to lion and my epson printer will not work. I get a communication error

    I upgraded from leopard to lion and my Epson printer will not work. I get a error message comunication error. What can Ido to fix this I bought a new USB cord and it did no good.

    I suddenly had the same thing happen. I've had my new iMac for 3 months and at first my Epson Artisan 50 worked okay then yesterday I started getting the same error message other people on this support site have gotten. I tried ALL the advice given (deleating the Epson files from the library folder, etc. reinstalling older software) and nothing worked. With the newest iMac (and operating system) you cannot pick and choose which version of Epson software you want. You must use the 10.8 version or it simply will not open when you've downloaded it. Finally I found the comment above by den.thed and tried the OS X Mountain Lion: Reset the printing system suggested. As much as I hated to lose all my printing presets that took a lot of expiermentation to set up, I was desperate. I tried it and it worked. Now I just have to consult my old computer and try to recreate all my printing set ups.  So to others with Epson / Apple 10.8 issues this may help when everything else fails. Thanks den.thed for your advice.

  • I have a copy of Web Premium CS3 which was installed on a Windows Vista PC.  I have a new Windows 7 PC and the installation disc will not run properly.  The installation begins and then asks for the CS3 disc to be inserted.  If I re-insert the CD I just g

    I have a copy of Web Premium CS3 which was installed on a Windows Vista PC.  I have a new Windows 7 PC and the installation disc will not run properly.  The installation begins and then asks for the CS3 disc to be inserted.  If I re-insert the CD I just get a message asking for the disc to be inserted.  any ideas anyone?

    Use the download version:
    Download CS3 products
    Mylenium

  • I had to reformat my early 2008 MacBook and have now lost Pages/Keynote/Numbers. I tried to repurchase only my OS is incompatible and Mountain Lion OS will not run on my MacBook. Really annoyed as MacBook is in good condition but now useless to me.

    Help please!
    I had to reformat my early 2008 MacBook and have now lost my pre-installed Pages/Keynote/Numbers. I tried to repurchase only my OS is incompatible and Mountain Lion OS will not run on my MacBook. Really annoyed as MacBook is in good condition but now useless to me.

    ^ hahahahahahaha^
    from da uk

  • I have recently purchased finale 2011, and it installs, but will not run?  Any idea what the problem is?

    I have recently purchased the finale 2011 music program, and it installs without any problems, but will not run when I try to start up the program.  It acts like it is going to start, but stops when loading the plugins.  I have been talking with Finale tech support for three days, and they are coming up empty, but they are still trying.  Any ideas what the problem might be?
    Thanks,
    John

    Try booting in Safe Mode (hold the shift key while booting until the grey progress bar appears).
    If you're able to log-in, then re-boot and log-in

  • I have an macbook air and iPad 2. Then I upgraded to OS X YOSEMITE everything when downhill . it will not finish downloading and could not even used my FaceTime . Help pls.

    To Whom It May Concern,
    I have a MacBook Air, Ipad 2 everything was fine. Then I upgraded it to OS X Yosemite , everything when downhill, can not even use FaceTime . i have tried everything. Can somebody help me out on this please. Thank you.

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Installed OS X Yosemite, and Illustrator CC 2014 will not print

    Just Installed OS X Yosemite, Mac Powerbook. and now Illustrator CC 2014 will not print to my HP Laser jet Pro 400, But Acrobat, Photoshop do. Any advise, I even Uninstallled and reinstalled the HP Drivers.

    Did you also uninstall, run the cleaner tool and reinstall all your Adobe apps. In recent versions of the Mac software (10.7 and up) migration will not work reliably with the Adobe Suite.

  • Upgraded to ML from L and am locked out, will not accept password

    just upgraded to ML form L and am locked out, won't accept my password....i cant use my laptop now, what can i do?

    I haven't tried this process in ML but I don't think it's changed from L.
    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

  • System upgrade on MacBook Pro stopped and my MacBook Pro will not restart.

    MacBook Pro will not restart.

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    If you are unable to get it working using the above, then you will need to try this:
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    And, if this doesn't help, then the HDD is failing or has failed.

  • I just upgraded to OSX 10.8 and now my compute will not unmute!

    I went to watch a video and got no sound so I hit the volume up key and got no responcse. Then I trired to move the slider up by the WiFi signal and I can't move that at all. I went to the System Preferances and right next to overall volume it shows the mute checkbox to be checked but it is grayed out and can not be unchecked.
    Any Ideas as how to fix this?

    I got it back with one reboot and have not lost it since. I would say it is a problem with seeing that the sound was off when the new OS was installed.
    As for the rest of your reply that is some elitist BS. The only OS that will not have any problems is the one you build your self but then it might also not run a lot of the software you want. In my years of computer use I have had no more problems with DOS,3.1,95,98,XP,Win7 and now Win8. then I have had with OS7,8,9,10

  • Since my upgrade to mountain lion now my Italian language CDroms will not run, the message says PowerPC applications no longer supported.

    So am I just screwed?

    Here is a post that I assembled for another who needed to continue to run his PowerPC applications in Lion/Mt. Lion:
    Unfortunately you got caught up in the minor miracle of Rosetta.  Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
    However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion).  While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
    Workarounds:
    1. If your Mac will support it, restore OS X Snow Leopard;
    2.  If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
    3.  Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
    3.  Install Snow Leopard (with Rosetta) into Parallels:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439
    NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
    NOTE 2:  Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

  • Latest iTunes and QT install properly, will not run. Help?

    Fujitsu laptop 2.8Ghz, 512MB memory, XP SP2, iTunes 6.0.2.23, QT 7.04. Hardwired to router/cable Internet connection.
    I am a dedicated Mac user, and friend has the above equipment. He had a previous point level version of iTunes that stopped working about the time he started using his new Nano. He removed iTunes and downloaded latest (above). Installation runs and finishes normally without any informational or error messages. Attempts to run iTunes from the desktop, or directly from the iTunes application fail (w/o any messages). Like a cat, it just ignores you.
    I personally used the control panel to remove iTunes, and then delete iTunes folder corpse in program files. Rebooted the computer, downloaded (above) iTunes/QT package. It installs normally, yet any attempts to launch iTunes recreates the no activity situation. Both network installs and local installs produce same result.
    He is going to use his vendor supplied backup disks to reinstall the computer. Then perform O/S updates, and then try to reinstall iTunes/QT again.
    Is there any malware in the wild right now that may be contributing to this issue on Windows platforms? I will also be recommending that he turn off his Symantec A/V software for the next install, though it wasn't off during the initial successful installation and use of iTunes.
    Any constructive ideas to get back out of the ditch? Yeah, I tried for months to get him over to the Apple side without success.
    Thx,
    Chuck
    iMac DV SE, 400Mhz, 1GB Ram, 120GB Seagate   Mac OS X (10.4.4)   Macally PHR-100AF Firewire Enclosure

    Ok it is solved.
    Reinstalled iTunes 6.03/QT 7.04 bundle with Norton Internet Security turned OFF.
    With NIS still off, launched NIS panel and selected programs tab. Went to configure button, and then added each iTunes and QuickTime executable to NIS with "Permit" authorization.
    Turned NIS back on and rebooted. Upon restart, clicking on iTunes desktop icon launched and played iTunes normally. Visited Apple music store, and also launched QT movie trailers without issue.
    Again, friend's Fujitsu laptop running XP is now working fine after a hard lesson with Norton Internet Security application.
    Thankyou,
    /ckh

Maybe you are looking for