Upgraded no print duplex doesn't work

I have a HP laserjet pro 1102w printer which is still in stores. I upgraded to Mt Lion and now my printer will no longer duplex. The printer used to allow for manual duplexing, but now I would need to print each page individually to instead of having the duplex happen. I have verified with HP that I have the lastest driver installed, and I do. I have also tried deleting and re-adding the printer multiple times.
Anyone find a solution to get this important function back? The option is visible, but grey so I can't change it to duplex. I'm guessing it has something to do with the AirPrint.
Thanks for your help! I really need to do some course printing today.

I knew if I posted a question I'd figure it out. It was Airprint. Uninstalled the printer and installed not using the Airprint option. Duplex option is now available again.

Similar Messages

Cannot print with a Samsung ML2160 printer (mono laser) and Pages. Print function doesn't work, only drag and drop in printer's queue

Hello,
I just purchased a Samsung ML2160 printer and it doesn't work with nor my Pages program, nor the Preview (to print PDF). No matter the way I tried, the Print function doesn't work and I cannot neither print or even enter the printer preferrences menu! My MacBook Pro has worked before with other printers, but now with the Samsung it doesn't work at all... Though, if I drag and drop a document, jpg, pdf in the printer queue, it prints just fine, but that method gives me absolutely no freedom to the printing... Could it be something from the Computer -> Machintosh HD -> Library -> Printers? Because a friend of mine was recently trying to save me some disk space, and therefore erasing part of the HP printer (to remove the previous printer I owned)...
If anyone has any idea, that would be much appreciated
Thank you in advance

Do the sensible thing, as you say neither Preview nor Pages print, try other programs eg TextEdit. If none of them print then it is a System problem and very likely the printer drivers are AWOL or were never installed.
Go to Samsung's website and download their software for the Mac:
http://www.samsung.com/uk/consumer/print-solutions/print-solutions/mono-printers /ML-2160/XEU-support
http://www.samsung.com/uk/support/model/ML-2160/XEU-downloads
Peter

I pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

i pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

Hi,
"A day after the name change became official my built in skydrive app stopped working"
Did you point that SkyDrive changed to OneDrive?
Did you move your OneDrive to another location or change its name?
Please login OneDrive with web-based to check if you could access it successfully.
Please refer to the following article to try the troubleshooter and check the service status:
SkyDrive: FAQ
http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
Karen Hu
TechNet Community Support

Since upgrading to LION, stuffit doesn't work (get message Power Pc apps no longer supported) So, how to I unzip RAR files now?!?

since upgrading to LION, stuffit doesn't work (get message Power Pc apps no longer supported) So, how do I unzip .RAR files now?!?

Use the current version of Stuffit Expander.
(63916)

I have Epson AL14NF printer. it doesn't work. I have driver. My Macbook Mac OS X 10.8.5 what can i do?

I have Epson AL14NF printer. it doesn't work. I have driver. My Macbook Mac OS X 10.8.5 what can i do?

http://forums.adobe.com/message/6115370#6115370

I have a late 2006 iMac upgraded to lion, Quicktime doesn't work anymore. Preview won't show images, any ideas anyone?

I have a late 2006 iMac upgraded to lion, Quicktime doesn't work anymore. Preview won't show images, any ideas anyone?

You are correct....it will not work. Please carefully read Apple's Target Display Mode: Frequently Asked Questions (FAQ)

IPhone 3GS upgraded to iOS5, vibrate doesn't work

I upgraded my iPhone 3GS to iOS5 a couple weeks back and since then vibrate hasn't worked.
I've checked that vibrate is enabled in Sounds and also checked Notifications.
I managed to get the iPhone to vibrate once after the upgrade, but not since. Even using the silent switch doesn't vibrate the phone anymore, neither does plugging the phone into a power source.
Any ideas?

Hi to the forum. This is my first post - ever!
It's taken me 25 years of Apple equipment purchase and enthusiastic advocation to get to this point.
And what has got me here? 'The GPS on my iPhone 3G has doesn't work'. If you Google this statement you get 12 million hits. It seems to me that's probably 12 million people who have a problem with an Apple product they've purchased.
I've read a lot of the solutions that other users have come up with - dozens of different ones. I've updated the iPhone software as soon as I can, I've been patient, I've given Apple chance to sort it out. I've even gone back to printing out Google maps onto paper (remember 'paper') and taken those out with me in the car to find my way around town.
However - the southern hemisphere summer is coming and I want to use the (totally brilliant) Navionics chart/GPS App on the boat. No chance. According to the iPhone we're in Africa not New Zealand.
So what to do? I can't find any 'official' info from Apple. I've no idea how the politics of these situations work - and I don't care! 12 million hits can't be wrong. Apple needs to tell it's users what is happening (even if they're still working on it), and when we can expect a fix.
Come on Apple, keep us in the loop - we love your products - and we want to keep advocating for you!
PS - this is the best place I could find to have ths little discusion - if anyone has a more direct line to God (err I mean Apple) please let me know!

Upgraded to Leopard, Mail doesn't work

I recently upgraded to Leopard and the Mail program doesn't work. Won't display any mail. Seems to send mail okay from my .mac and .aol (my main email address) accounts, but no messages are displayed, and it is impossible to quit Mail without going through a force quit. I resisted upgrading to Leopard because everything ran so smoothly in 10. 4. 11. But I thought it was time. So far, I've seen no improvements, and this one big problem!
Any ideas? Bob Krist

After upgrading from Tiger to Leopard with the default method Mail was the only thing that didn't work. It wouldn't open a Mail window, appeared to be open on the menu bar and in the dock but would not quit from either command. I had to force quit. When I finally got a mail window to appear, all my email profiles and folders appeared in the left hand bar, but nary an email to be seen in any location. I could not send or receive emails. Pretty much dead!
I didn't have a meltdown because I'd archived my most important emails that were in my folders. I dug through dozens of posts on multiple forums and tried a procedure I could see was making it worse. I shut down the computer so I could get help from AppleCare this morning.
I got in trouble following the less than adequate instructions from The AppleBlog; inadequate because it didn't say where to move the folders and plist to. My most helpful Apple Tech advised me that I needed to QUIT Mail before dragging ONLY the ~Library>Preferences>com.apple.mail.plist file to my desktop. The two folders need to stay in the Library.
After you are out of Mail, on the desktop click on the plist to highlight it. Use Control-click to display the popup menu and select Copy for the plist. Open finder window and select ONLY Preferences (~Library>Preferences) so the word Preferences is highlighted. Go to the Finder>Edit>Paste drop down menu of the toolbar. Select Paste. It will ask if you want to replace the newly created plist with the one you just copied. Select replace. Relaunch Mail and that should restore all your Mail Profiles and retrieve your messages.
This process even brought back my mail folders and put all my saved messages back where they were filed. I didn't have to get into my archived messages file after all.
I just wish I could have found this simpler fix online without spending hours searching and reading conflicting suggestions. Maybe this will help someone else fix their problem faster.
Officially in MacHeaven: Mac Pro 3.0 GHz, 17" MacBookPro, G4 Quicksilver 867 MHz Mac OS X (10.5.6)
Report this post

After to upgrade IOS6 my password doesn't work.

Hi !
I have a big problem. I upgrade de new version of IOS 6 and now I cannot open my Ipod because my password doesn't work.
What can I do?
Thanks

Hopefully this will meet your needs. Via Google you will find other suggestions.
iCloud: Change your iCloud account password

"Print page" doesn't work as intended when using lengthy tables. (Brother MFC 6490CW, possibly others)

I had originally thought this was a printing driver problem, but further testing indicated that this was not a problem in Internet Explorer and it was a problem in Firefox.
When printing some web pages using Mozilla Firefox, particularly those having sizable tables which would extend beyond the length of a single printed page, the remainder of the table is not printed even though the remainder of the web page itself is printed. The behavior is also noted when using Print Preview. See, for example, this web page which I created: http://alltherightwaystowrite.blogspot.com/2013/08/the-basics-capitalization.html
I inquired of other bloggers to see if they were also experiencing this issue. See, for example, the discussion I began here: https://productforums.google.com/forum/#!msg/blogger/EpD6K2ezIZE/a5mPu8CV0HwJ
As you can see, the only response I received indicated it was not an issue for that person with a different printer. This leads me to believe the problem is with either the MFC6490CW printer (unlikely) or the MFC6490CW printer driver (more likely) or perhaps with Firefox, or some combination of those three. This problem is duplicatable by me on successive attempts to print with any web page with a table extending beyond the length of a single page of printed paper. The output error occurs whether printing in portrait or landscape mode.
Saving a web page as "Web Page Complete" and opening up the web page in Microsoft Word created a variety of formatting errors, but otherwise, the entire contents of the page would have printed. Of course, this is not an ideal solution in any event. The entire document should print seamlessly across multiple pages without losing any data or content in the process.
As indicated above, as an additional test, I attempted to print the same web page in Internet Explorer and did not note the output errors described here. The web page printed correctly under those conditions. As a result, I believe that the most likely culprit is Firefox since Internet Explorer was also a good test case for my printer and printer driver, and it passed that test case.

https://bugzilla.mozilla.org/show_bug.cgi?id=521204 - this is a META Bug which is tracking all the Bugs which are related to '''Wrong page splitting / Missing page content when printing''' - 34 different Bugs, 14 of which are marked as solved.
IMO, that page would be better served with a print css script ''(as jscher2000 mentioned earlier)'' to make that a "printer ready" page, if wanting that page to be "printable" is your intention. As it now is that page is shrunk by about 50% with the "Shrink to Fit" feature engaged. Look at that page in Print Preview when the Scale is set to 100% instead of Shrink to Fit, and see that the page is so large that it shows that about 1/2 the width. Then decrease the zoom level in Print Preview to 50 or 60% to get that page to fit horizontally with the "Shrink to Fit" feature disabled. Looks like a case of "garbage in - garbage out".
I think the css used for that page uses too large a font which ''(IMO)'' forces Firefox to shrink the font too much to make that page fit to a letter size sheet of paper. And relying first upon the Print to Fit feature in the four different major browser engines ''(Gecko, Trident, WebKit, and Presto)'' and then the hundreds of print drivers out there is just looking for failures such as you are seeing; it works for some viewers and doesn't work for other viewers. What appears on the '''"screen"''' doesn't always translate to the '''"printed page'''" too well without proper instructions via style sheets, especially since "screens" are oriented horizontally and most "printed" pages are vertically oriented unless the user shifts to the Portrait view.
http://www.w3.org/TR/CSS2/media.html#media-types <br />
http://www.w3.org/TR/CSS2/page.html

The "print" button doesn't work

Hello, I have a problem with the "print" button, in a Macbook Pro 15" 2.8GHz.
In all the programs, when I want to print anything, I go to file/print/print.
Well, when I press the "print" button, it doesn't work, but in "Word" when I press the "print" icon works, but with this button I can't write the page number or pages and other things that I want to print.
I tried to re-install the Snow Leopard, repair permission disks, and re-install the drivers of my Epson printers (I have two). All this things couldn't solve the problem.
I have an iMac and with it I can print without problems.
Can somebody help me? Thanks very much.

The probable cause of this is that the /Library/Caches/Epson folder is missing.
There are several threads here about this issue with Epson printers: try deleting the <hard drive>/Library/Printers/EPSON folder and then reinstalling the software through Software Update or from the Apple download site. After installing the software, restart, delete and re-add the printer. That should recreate the /Library/Caches/Epson folder, and you should be able to print.
hope this helps.

After Yosemite upgrade Pin it button doesn't work

I just upgraded to Yosemite. Now my Pin it button on Safari's toolbar just doesn't work. What happened? What can I do?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Canon pixma mp560 printer/scanner doesn't work wirelessly

I have a canon mp560 printer/scanner. It works fine w/ my mac when I'm plugged in w/ the usb but then goes offline and won't print when I try to go wireless. I've reinstalled the software and everything functions fine, but the printer and scanner will not run wirelessly. I've tried the canon website and have not been able to solve the problem. Does this have something to do w/ bonjour? I'm relatively new to macs. This printer runs wirelesly w/out problem on my pc. Thanks for any help.

Your problem is being caused by sharing this printer via USB. The UFR2 driver for Mac causes problems when being shared, even to other Mac's. Since the MF has an Ethernet port you would be better suited to buying an Ethernet hub and connecting all computers and the printer to this hub.
As for the scanning, I don't believe there is a network scanning application for Mac. AFAIK the MF ScanGear for OS X is for USB only so you would need to have the MF connected to the Mac for scanning - unless it has a Send function which would allow you to send a scan to a shared folder on the Mac. But looking at the spec pages for this model I could not tell if it has this feature.

Setting HP LaserJet 2200d Duplex Doesn't work

Machine is fully updated via Software Update as of 7/15/2008 (10.5.4), including the 7/15/08 HP Drivers.
Printer: HP LaserJet 2200d
Interface: USB
Driver: /Library/Printers/PPDs/Contents/Resources/HP LaserJet 2200.gz
I installed the printer and ensured it is using the correct driver.
Open the print queue, select Info, select Driver, set the Duplex Unit checkbox and set the RAM to 8-15MB to match printer's 8MB RAM.
Open any PDF using Preview.
Command-P to print
Set pages to print From 1 to 2 (to save resources, has no effect on this behavior)
Open Layout
Set Duplex to Long-edge binding
press Print
Resulting job is printed single-sided on two sheets.
I use Preview and PDFs as an example application. Every application I have tried prints single-sided when long-edge is set.
Interestingly, if I issue the following shell command, duplexing is properly enabled:
lp -P 1-2 -o sides=two-sided-long-edge samefile.pdf
Also, when I print to this print queue over the network from a Tiger 10.4.11 machine, duplexing is properly enabled.
Is there a fix?

Yes, I was using a "No banner" preset here at home, too. Not exactly sure why.
Printing using "Standard" then setting two-sided worked.
Exiting Preview then using "Last Used Settings" also resulted in duplex printing.
I wonder if this has something to do with a printer preset being migrated from a 10.4 account or something....
Since deleting that preset, I haven't been able to get it to fail either. Even creating new presets, selecting it, then adding duplex.

Canon Capt printer driver doesn't work under OSX Mavericks

Since I upgraded to 10.9, my Canon i Sensys LBP 5050 doesn't print anymore. Installing the latest Capt driver (3.65) from the Canon website didn't solve the problem.
Any thoughts?

Same problem. Canon LBP5050.
Did all things mensioned in this topic. No result.
Статус:          Ожидание
Принт-сервер:          Локальный
Версия драйвера:          3.65
По умолчанию:          Да
Общий:          Нет
URI:          cnbma://localhost:59687
PPD:          Canon LBP5050 CAPT (UK)
Версия PPD-файла:          3.65
Версия PostScript:          (3010.000) 550
(3010.000) 651
Версия CUPS:          1.7.0 (cups-372)
Поддержка сканирования:          Нет
Команды принтера:          none
Фильтры CUPS:
capdftopdl:
Путь:          /Library/Printers/Canon/CUPSCAPT/Bins/capdftopdl
Права доступа:          rwxr-xr-x
Поддержка факса:          Нет
Утилита принтера:          /Library/Printers/Canon/CUPSCAPT/StatusMonitor/StatusMonitor.app
Версия Утилиты принтера:          3,65
PDE:
FinishingPDE.plugin:
Соответствующий sandbox:          Да

Upgraded no print duplex doesn't work

Similar Messages

Maybe you are looking for