Upgraded, now my IPAD won't restore

So my IPAD was still on IOS 4. I got on Itunes, did a back up, transferred my apps, and the upgraded to IOS 7. Afterwards when I turned on the IPAD it prompted for the Language, Country, network and then asked if I want to Set up as a new IPAD, Restore from icloud backup or Restore from Itunes backup? I choose itunes and no matter whether I choose the backup it performed right after the upgrade or the one I did first thing before upgrade it goes through motions of restore but when I disconnect and start the IPAD it prompts for the same thing... language, country, network, restore?
What am I missing here? This is the first time I have updated the IPAD.

Try a reset ..
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings

Similar Messages

HT1430 I tried to upgrade to ios 4 by plugging my Ipad into Itunes on my desktop. I got an error report and now my Ipad won't work at all. I can only get a screen with a plug and an arrow pointing to the Itunes logo.

I tried to upgrade to ios4 by plugging my Ipad into Itunes on my desktop. I got an error message as it was downloading. Now my Ipad won't turn on at all. All I get is a pic of the plug and an arrow pointing to the Itunes logo. I tried to reset, but nothing works. When I try to plug the Ipad into my desktop and access Itunes, my Ipad doesn't show up on the Itunes screen.

You need to restore your iPad using recovery mode and the process is covered in this article.
iPad: Unable to update or restore.
http://support.apple.com/kb/ht4097

I just upgraded to the new 5.0.1 software and now my Ipad won't sync, any ideas?

I just upgraded to the new 5.0.1 software and now my Ipad won't sync, any ideas?

Are you using ITunes 10.5? If so have you upgraded to the OS 5 software? Now it should tell you there's an even newer upgrade to the 5.0.1 when you try to sync your iPhone or iPad. Hope this helps.

My 1st generation iPad won't restore

My first gen ipad won't restore. It won't turn on, it won't turn off, it won't show the apple logo when I try to put it in DFU mode, and it won't show the 'connect to itunes' symbol. Basically it won't do anything that all the trouble shooting tips suggest!
When I plug it into the mains via it's charging dock, it flashes the apple logo every 10 or 15 seconds, but when I plug it into the mac it only manages to flash very weakly every 5 seconds or so.
After many attempts, I managed to get itunes to recognise that there was 'an ipad in recovery mode' but every time I tried to restore it, I got the message 'unknown error 1602' and when I looked this up, it basically said it was the same as about 10 other error codes and that all I needed to do was change the USB port and/or restart itunes and/or the mac and it would all be good.
I did all of these things several times and in various permutations but to no avail.
I'm not 100% sure of the operating system on the ipad (and of course I can't check at the minute,) but I'm sure it's iOS 5. something! (I did update regularly, or when prompted by the system, but haven't done it in a while because my wife uses it now.)
My itunes is up to date - Version 11.0.1
I know it's a long-shot but can anyone help?
Thanks
PK

I have a similar problem. But my iPad shows the connect iTunes screen and gives error 2001 when I try to restore it.
My iPad's battery was fine but I didn't use it for like 2 weeks. It's battery would've discharged and it turned off. When I tried to charge through wall socket, it got into the restart loop where it would show apple logo and turn off. So I did the simultaneous holding of Home and Sleep buttons for 10 seconds or more. It started showing connect to iTunes.
When I try to restore, the iTunes does the usual "extracting file" or something and go upto preparing for restore. But the iPad screen turns off from "connect to iTunes" and iTunes gives the error 2001, and the screen is back to connect to iTunes.
Also, if I don't plug in, the iPad seems dead, doesn't wake up or anything.

I have downloaded ios 6 on my ipad 2 but it wouldn't install and now my ipad won't work (just has the apple logo on the screen periodically) or reset. Any ideas? Thanks in advance.

I have downloaded ios 6 on my ipad 2 but it wouldn't install and now my ipad won't work (just has the apple logo on the screen periodically) and it won't reset. Any ideas folks? Thanks in advance.

Try restoring the device using iTunes. Connect the iPad to your computer and when iTunes opens, select your device on the left side, then click on the summary tab, then click on Restore.
After the device is restored you will have an opportunity to restore from your backup. Restore from the backup when you are done and then sync with iTunes.
if that doesn't work, try recovery mode.
http://support.apple.com/kb/ht4097

I update my iTunes to update my ipad and my computer died during this and now my ipad won't connect it has an iTunes sigh on the screen

I update my iTunes to update my ipad and my computer died during this and now my ipad won't connect it has an iTunes sigh on the screen

Hello Macahoy18,
Thank you for using Apple Support Communities.
For more information, take a look at:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Have a nice day,
Mario

I bought a new computer and now my IPad won't snc

I bought a new Apple laptop and now my IPad won't sync. It shows up on the left side but when I try to sync it, it says the apps installed can not be deternined. Does anyone have any idea what my problem is? Thanks in advance.

Did you transfer all of your iTunes content/iTunes library to the new Mac? If you didn't, have you transferred purchases into the new iTunes library from the iPad?

Refurbished ipad won't restore

refurbished ipad won't restore or start up. Only have had it for 2 weeks.

If the above fails you can download a free programme called Recboot. Follow the simple instructions and it will kick you ipad out of the recovery mode and bring it back to normal. I jave just used it myself as mine was stuck in recovery mode due to a corrupt back up file.

I have changed my password on my iPhone but now my iPad won't allow me to lo in to anything or update...help please

I have changed my password on my iPhone but now my iPad won't allow me to lo in to anything or update...help please

Apple ID: “This Apple ID has been disabled for security reasons” alert appears
http://support.apple.com/kb/ts2446
Contact Apple Support
https://expresslane.apple.com/GetproductgroupList.action
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Look at this post https://discussions.apple.com/thread/5767569?tstart=60
 Cheers, Tom

Hello I went to wipe my 1st generation iPad and then tried to update the iOS now the iPad won't work at all any ideas what I can do?

Hello I went to wipe my 1st generation iPad and then tried to update the iOS now the iPad won't work at all any ideas what I can do?

You can't update the original iPad beyond iOS 5.1.1 so if you were already running that version, there was no reason to wipe the iPad to try to update.
Won't work at all, doesn't tell me the whole story. Does it power up but not respond to anything? Does it not power up at all? Some detailed information in context would really be helpful.
IF the device will not start up, try a reset. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple Logo appears on the screen.

HT201263 iPad won't restore, shows apple logo, won't restart. Battery is low but won't recharge. Is it a sudden loss of battery function?

iPad won't restore, shows apple logo, won't restart. Battery is low but won't recharge. Is it a sudden loss of battery function?

If you were restoring to a backup or resetting back to factory defaults, then have you tried recovery mode : http://support.apple.com/kb/ht4097 ?

IPad won't restore, Errors 9, 21 and 1611

My iPad boots into recovery mode but won't restore. On my windows 7 PC i get errors 9 and 21, on my XP machine i get error 1611. I have tried DFU mode, uninstalling all apple software then re installling it, a diffrent USB cable and a diffrent usb port. but still no luck :/. When i attemt to restore, on the iPad screen the progress bar shows for about a second then the screen goes black like it just powered off, however, it shouldn't since the battery holds a good charge. please help, i've been trying to fix this for hours now. Thank you

#9 is loss of USB connectivity, the other two are security software errors. Sounds like you may have third party security software that is not allowing iTunes to connect.

I had to reinstall iTunes and now my iPad won't sync.

I tried to upgrade with 11.1.4 and everything go messed up (Windows 7 user). I ended up going back to a later version of data on my computer. Then I was able to reinstall iTunes. My iPhone is syncing like it should, but my iPad won't sync. I've lost the App Sore icon and others. Not sure what to do. I refreshed my iPad but nothing is working.

attach a screenshot of the error unless that's all of the error message.
if it is, Troubleshoot install using logs | Elements

Ipad won't restore due to passcode being on

My iPad will not start past the apple logo, but when I try to restore the iPad, iTunes cannot connect because it is locked with a passcode. How do I get the passcode turned off when My iPad won't start up?

Hello there, KatieLE.
The following Knowledge Base article offers some great information for resolving your issue:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Particularly:
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I've tried resetting my passcode and now my iPad won't turn on

I've tried to resetting my passcode now my iPad has turned itself off and won't turn back on again.

Try a reset. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

Upgraded, now my IPAD won't restore

Similar Messages

Maybe you are looking for