Upgraded OES2 SP1 to SP2 no GW Webaccess

We just upgraded an OES2 Sp1 server to OES2 Sp2 and things seemed to be fine from the upgrade point of view, but GW webaccess does not work. Apache and Tomcat both are loaded, as are the GW components and we are getting emails, but no web access, using the same link that we did before. I was thinking that something might have changed with apache and how it works with OES2 SP2, instead of how it did with OES2 SP1, any ideas where to look next?

Originally Posted by jmarton
On Tue, 04 May 2010 15:16:03 +0000, dschaldemcs wrote:
> It is GW 7.0.3 or 4 I cannot remember which at this point. All I
> remember was that there was a TID that explained how OES2 SP2 handled
> things with apache. The title was "GW Webaccess and OES2" I will look
> for it as well.
This one?
Installing WebAccess Application on OES2/SLES10SP1+OES2 Add-on
Yes that was the one, it worked for us, and GW Webaccess is working once more. Thank you
Joe Marton
Novell Knowledge Partner
Enhancement Requests: http://www.novell.com/rms

Similar Messages

Upgrading from sp1 to sp2

Team Portal -
I just upgraded my application from Sp1 to Sp2 (basically right click on application
and select Install -> Update Portal Libraries).
Do I need to do anything to the domain, or just rebuild and redeploy the ear file?
Thanks
Regards,
Neeraj

I didn't do anything to the domain, but I did "install portal" and "install
weblibs" too.
I first did only the update too I think, work perfectly till I made a simple
jsr-168 portlet with the wlw wizard that didn't work.
Thank you for any and all help,
Geoffrey
"Neeraj Harlalka" <[email protected]> schreef in bericht
news:3fe72282$[email protected]..
>
Team Portal -
I just upgraded my application from Sp1 to Sp2 (basically right click onapplication
and select Install -> Update Portal Libraries).
Do I need to do anything to the domain, or just rebuild and redeploy theear file?
>
Thanks
Regards,
Neeraj

Upgrading OES11/sp1 to SP2

Need to upgrade my OES11sp1 to sp2 on my GW2012sp2 box. My current GW version should be fine on SLES11sp3, correct? Also, anything to watch out for? Novell informed me to use the wagon method for upgrading. Anyone out here used this before?
Thanks for any insight

So from the Groupwise side of things, during the wagon upgrade, do you have to specify any kind of add-on product at all?
Thanks again
Originally Posted by mrosen
Am 08.10.2014 23:06, schrieb shesser:
>
> Thanks for the reply! In your best guesstimation, how long does one
> usually take to finish? I know the offline dvd mode took about 30
> minutes or so but then there was patching afterword that took a while.
That really depends on the speed of your source. A wagon upgrade froma
local SMT server can be finished in less than 30 minutes, including all
patches already applied.
CU,
Massimo Rosen
Novell Knowledge Partner
No emails please!
http://www.cfc-it.de

Download weblogic server 6.1 upgrade from sp1 to sp2

can u give me link to download the weblogic server 6.1 sp1 upgarde to sp2

NSRao <[email protected]> wrote in message news:<[email protected]>...
can u give me link to download the weblogic server 6.1 sp1 upgarde to sp2go to http://support.bea.com and login. then you will see a selection for
service packs near the bottom of the center column. you must have an esupport
account to get the service packs.
Wayne

Trouble doing a database upgrade test for SCCM upgrade from SP1 to SP2

I'm trying to do this test and am having trouble. I'm following the instructions in
http://technet.microsoft.com/en-us/library/bb693648.aspx. However when I enter the command at a command prompt: setup /testdbupgrade e:\database test\sms_hlb_new I get the message: The setup command line option is not valid on this computer.
Any help anyone can provide to get around this problem would be appreciated. I'm not a SQL admin and haven't done an SCCM upgrade before so any tips for a newbie would be great. Thanks!

The procedures are basically the same. You can even attach a copy of the database where ConfigMgr is runnig on (be careful to not /testupgrade the wrong one then). You cannot provide a command line parameter to point to a remote SQL server, but you can
start setup.exe on any machine (so local to the SQL where the copy of the DP is)Torsten Meringer | http://www.mssccmfaq.de

Upgrading from SP1 to SP2 not possible?

Hi,
when installing CRRuntime_12_1_mlb.exe (Crystal Reports 2008) and after that CRRuntime_12_2_mlb.exe, there is an error message like "A different version of this product is already installed...cannot continue...." (translated from German). Why is that? Isn't it possible to upgrade?
Regards,
Florian
Edited by: floele on Aug 13, 2009 1:55 PM

It should be possible. Unfortunately, my testing indicates the following:
If you try to install CRRuntime_12_2_mlb.exe over CRRuntime_12_1_mlb.exe, you get the error.
Trying to update the runtime using the CRRuntime_12_1_mlb.msi results in the same error.
Same error is produced trying to update runtime installed by CRRuntime_12_1_mlb.msi and trying to update that with CRRuntime_12_2_mlb.msi.
Possible workarounds:
1) Preliminary test indicates that if you create your own setup project (setup.exe) or msi, the issue goes away.
2) Uninstall the runtime from the CRRuntime_12_1_mlb.* and do a new install using CRRuntime_12_2_mlb.*
This issue will be tracked with R&D for a resolution. I will update this thread once I have the tracking number.
Ludek

Please help: Application doesn't work after upgrade to Workshop 8 sp2 from sp1

Hi,
Our application worked on workshop 8 sp1. After we upgrade system from sp1 to
sp2, some of the part doesn't work propertly any more.
1. netui:select seems not bind form data propertly. For drop down list box in
forms, although user has chosen something from the drop down list box, the returned
value in the form is always null.
2. we use Java script window.open(url,...) to download and view files. After upgrade
from sp1 to sp2, clients keep getting IE error complaining that "Internet Explore
can not open this Internet site. The request site is either unavailable or can
not be found. Please try again later", although the server and the files are all
in local host server.
Please help. Thanks

Did you update your workshop application files and recompile your application?
A few things changed between GA and sp2, some annotations were renamed, and some
were added.
If you open up your application in Workshop sp2, it should given you the option
to upgrade your application.
Failing that, you may need to go through the code that is not performing as it
was before and check whether it was not utilising a bug that was fixed in sp2
and thus causes it to not function correctly now.
"Cynthia" <[email protected]> wrote:
>
Hi,
Our application worked on workshop 8 sp1. After we upgrade system from
sp1 to
sp2, some of the part doesn't work propertly any more.
1. netui:select seems not bind form data propertly. For drop down list
box in
forms, although user has chosen something from the drop down list box,
the returned
value in the form is always null.
2. we use Java script window.open(url,...) to download and view files.
After upgrade
from sp1 to sp2, clients keep getting IE error complaining that "Internet
Explore
can not open this Internet site. The request site is either unavailable
or can
not be found. Please try again later", although the server and the files
are all
in local host server.
Please help. Thanks

Exchange 2010 failing to upgrade to SP1, SP2, or SP3

My host server is running Windows Server 2008 R2 Standard. Currently Exchange 2010 is without any service pack. I initially tried to upgrade to SP1 but that failed with the message below. Thinking that I could perhaps skip to SP2 or even SP3 I attempt that
upgrade and received a similar message though not posted here. The Schema for our domain shows that it is at the Windows Server 2008 R2 level. I am attempting to apply the update using the Enterprise/Schema admin account for our network.
Here is the error message that I receive. This happens after all prereq checks are done and the installation has actually started.
Summary: 15 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:04
Organization Preparation
Failed
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "The operation couldn't be performed because object 'Default Policy' couldn't be found on 'marvin.intercity.org'.".
The operation couldn't be performed because object 'Default Policy' couldn't be found on 'marvin.intercity.org'.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "You cannot call a method on a null-valued expression.".
You cannot call a method on a null-valued expression.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "You cannot call a method on a null-valued expression.".
You cannot call a method on a null-valued expression.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "Cannot bind argument to parameter 'Identity' because it is null.".
Cannot bind argument to parameter 'Identity' because it is null.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Elapsed Time: 00:00:04
Preparing Setup
Cancelled
Stopping Services
Cancelled
Languages
Cancelled
Remove Exchange Files
Cancelled
Preparing Files
Cancelled
Copy Exchange Files
Cancelled
Language Files
Cancelled
Restoring services
Cancelled
Languages
Cancelled
Hub Transport Role
Cancelled
Client Access Role
Cancelled
Mailbox Role
Cancelled
Management Tools
Cancelled
Finalizing Setup
Cancelled

Agreed - check the default email address policy is not corrupt and same for remote domains - did you make ay modifications to them?
Since he is running this as das Uber-admin, it will prep Exchange schema and AD even if not explicitly done prior. Exchange setup is helpful like that, well some times....
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Upgrade App-V 5.0 sp1 to SP2 Hotfix4

long time reader first time poster
we currently have a App-V 5.0 SP1 native environment, we deploy the App-V client via SCCM and use the MSI in the command line ( msiexec
/i "appv_client_MSI_x86.msi" /q /norestart ACCEPTEULA=1 /l "C:\<log directory>" )
I would like to upgrade our environment to SP2 HF4 ( in a test lab first and then schedule to live )
Now is it better to create 2 new SCCM packages one for SP2 and one for the HF4? or is there a way to combine them?
also would you put the ClientUI install in the same package?
any advice or web URL either way would be very much appreciated

just to add, I am unable to get Hotfix 4 installed successfully either via a command line ( Msiexec /p mspfile ) or right clicking the MSP and selecting Apply
The HF installs and once you reboot you are no longer able to use App-V 5.0 Client UI or any of the App-V delivered apps.
The client has SP1 and was then upgraded to SP2 using the command line in my top post without the hotfix installed works as expected.
Does anyone have a guide to how to use the MSP file?
Update - it appears that the Hotfix removes the SP2 client

Exchange Server 2007 sp1 to sp2 upgrade error

Hello,
I am trying to upgrade exchange server 2007 to exchange server 2010 but my exchange server 2007 is running sp1 which cannot be directly upgraded to exchange 2010. To do this I need to first upgrade my exchange server 2007 sp1 to sp2, i am stuck because I
keep getting the error below:
Error:
The well-known object entry with GUID 6c01d2a7-f083-4503-8132-789eeb127b84 on the otherWellKnownObjects attribute on the container object CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=mw refers to a non-USG CN=Exchange Servers,OU=Microsoft
Exchange Security Groups,DC=domain,DC=mw. Please either delete the well-known object entry or promote the target object to a universal security group.
Does anyone know how to resolve this error?? please assist

My recommendation to you is to upgrade it to Exchange 2007 SP3 with latest Rollup Updates.
Note: Before you start installing the SP3 make sure you upgrade the AD Schema for Exchange 2007 SP3.
For the error you are getting
https://social.technet.microsoft.com/Forums/exchange/en-US/a9d56cc7-dbf8-401c-b4ea-1bfd3c1f13fa/problems-installing-exchange-2007-sp1-ghost-guid?forum=exchangesvradminlegacy
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Changing IP on OES2 SP1

Hi,
I have an OES2 SP1 running eDirectory on it. I need to change the IP of
that box. Going through all that TIDs and CoolSolutions I found this most
useful
http://wiki.novell.com/index.php/Cha...9;s_IP_Address
Now, below the Link on that site, there is a link to a shell script. Did
any of you try to run that shell script that is designed for SP3 on a SP1?
Or, would you guys recommend me to run through that wiki entry by hand?
Advance Thanks.
Bye
n0m
Ps: sorry, for a multi post.

Worked out well :)
I had to do it step by step, but at least I learned some new stuff.
kjhurni <[email protected]> wrote:
> Well you could do a few things, as usually if there's a problem and you
> call Novell they'll want you to be at the latest patch level.
>
> Anyway, you could upgrade to OES2 SP2 and use the change script
> referenced in the OES2 SP2 docs.
>
> Or update it again to OES2 SP3 and then run the script mentioned in the
> OES2 SP3 docs.
>
> I've only ever used the changeip script on OES2 SP2 and OES2 SP3 to be
> honest.
>
> However, according to the previous releases docs (you have to manually
> download the previous versions in a .zip to get the pdf docs) in the:
> oes_implement_lx_nw.pdf:
>
> It's on page 248 of the 290 page .PDF
>
> Configuration
> 1 Log into the server you are reconfiguring as the root user.
> 2 Download and save the ipchangesp1.sh script file ('Novell
> Documentation' (http://www.novell.com/documentation/)
> oes2/scripts/ipchangesp1.sh) to the root (/) partition of the server
> you are reconfiguring.
> The same script file works on both OES 2 and OES 2 SP1 servers.
> 3 Open the YaST Control Center.
> 4 In Network Devices select Network Card.
> 5 Confirm that the Old IP address you listed in Section B.2.1,
> General, on page 247 is in fact
> the IP address currently configured for the network card. You need this
> later in the process.
> 6 Using the various dialog boxes associated with the network card
> configuration, change the card
> configuration to the new IP address settings you listed in Section
> B.2.1, General, on
> page 247, changing each of the following as necessary:
> - IP Address
> - Subnet Mask
> - Router (Gateway)
> 7 Close YaST, then continue with Section B.4, Reconfiguring the OES
> Services, on page 248.
>

Proxy upgrade from SP1 to SP5 doesn't work anymore for virus scanning.

Upgraded from SP1 to SP5 and the virus scanning updates no longer work. No changes have been made it is a complete carbon copy using the migrate button. No ip addresses have been altered nor has the ports been changed. I've tried SP2, 3 & 4 and they too fail with a 504 error log. I turned SP1 back on and it works first time.
If you can solve this I'll be so impressed because its driving me crazy. I've checked all config files and everything is as it should be.

Hi
This thread was interesting as I have many customer sites using virus scanning without any problems together with this proxy.. Some sites are really huge as well.
Can the author of this thread explain how the scanning that now refuse to work is done with the proxyserver... Through an API or as forwarded requests to another scanning proxy (trend micro etc.) or what ? Maybe this is done in some way I am not aware of. Then I am really interested in your problem.
We mostly use it "user->proxy->vscanner->site" where the proxy and the scanner often run at the same host. This in huge installations together with load balancers infront and behind.
/Per-Olov

OES2 SP1 on linux iPrint issues - PCL errors.

Hi,
I've created an iPrint printer for a HP Laserjet 3005 on OES2 SP1 (linux), but I have a few printing issues.
When I use PCL6 drivers all I get is a PCL XL error (IllegalOperatorSequence), and when I use PCL5e drivers, whatever it prints is missing lines (either the last 3-4 lines of a word document or of an excel spreadsheet).
To troubleshoot the problem I've already updated the drivers (by using both universal and non-universal versions), the iPrint agent (i'm now on 5.12), and the iPrint server rpms (novell-iprint-server-6.0.20081215-0.3.i586) but so far nothing has changed.
I have the same exact printer model on a netware 6.5 SP7 and everything works fine, so it seems to be a linux-only issue.
Has anybody else run into the same problem?
Thanks,
Giordano

Hi,
This is a situation with iPrint we have offen even on Netware 6.x ... I don't know how many times I got this kind of issue ... I will give you somes workarounds for this issues with iPrint, but you will need some patient !!!
HP Printers :
1) Use HP Download Manager to upgrade your printer firmware.
2) Don't use Universal Printer Drivers (it worst in some case). Used to lastest drivers for your printer on the HP website.
3) If you used a external HP JetDirect like 170x, 175x, 300x used the LPR Gateway instead of RAW on port 9100.
Redo a printing test with the "buggy" documents and check if it's prints better.
4) If you have a internal JetDirect in the printer used RAW 9100 Gateway, try to print, same problems ? try LRP Gateway ... Redo the tests ...
5) If you still have the problem, but DEFAULT, LPR causes less problem, keep LRP and downgrade your printer drivers. For an exemple : Here, you used a HP 4000 driver for a 4250 series ... Sometimes the original CD of the printer have a better driver then the one offer on the website ... ( I got so many problems with iPrint since 5 years ... ) this will takes time to troubleshoot. Last week I tried 10 differents drivers to make my HP 2300 works properly on OES 2 SP1 Linux.
6) Try to update the RPM on your server with these one ... but wait at the end if no other solutions mentionned before works.
OES 2 SP1 32-bit
ftp://ftp.novell.com/outgoing/novell...317-1.i586.rpm
OES 2 SP1 64-bit
ftp://ftp.novell.com/outgoing/novell...7-1.x86_64.rpm
7) Be sure also you have a XP with the lastest patches and services pack in some cases, this was the solution, but not for every printers. EX : Windows XP SP3 + All Windows Updates installed.
Give me news i'm curious !

Patch Plumtree Foundation 6.0 SP1 to SP2

Hi,
we would at like to patch our installation of 6.0 SP1 to SP2 which is available since April 2008 (we cannot upgrade to 6.5 or even 10gR3 yet).
I think I have downloaded everything related to Foundation 6.0 and searched all possible plumtree, bea and oracle sites now but I didn't find any instructions how to apply the service pack.
The only document which was updated in 2008 are the Release Notes (http://one.bea.com/portal/server.pt?open=18&objID=2795854&mode=2&in_hi_userid=2&cached=true). The installation plan which was part of the 460MB download has a section for SP1 installation only and that's it.
So are we supposed to install the whole thing AGAIN to get SP2? Did anybody ever patch 6.0 SP1 to SP2?

Hi guys,
AFAIK, BEA doesn't release standalone maintenance pack for 6.x basically. In other words, the only way to upgrade is to use the 6.0 SP2 or 6.1 MP2 installer on top of previous version.
The only patch I know is for 6.1 MP1, there is a patch. So after applying, it should be 6.1.1.1.
I've done a the following upgrade so far, using the new installer and they work:
6.1 -> 6.1 MP1 -> 6.1.1.1 -> 6.1 MP2
6.5 -> 6.5 MP1
I haven't done the 6.0sp1 to 6.0sp2 but I guess it is the same thing. Do remember to run the installer on to upgrade all related components, check your deployment architecture.
Hope this helps.
Terry

Where's the OES2 SP1 documentation?

Novell Documentation takes us to the documentation for OES2 SP2. This is now the current release (just released) of OES2.
Since NOWS SBE2 2.5 is based on OES2 SP1, and has just been released, the OES2 SP1 documentation is still needed.

Originally Posted by Paul Gear
I don't know if you care about this any more, but you can still get the PDF documentation at http://www.novell.com/documentation/...oes2sp1all.zip
The HTML version seems to have disappeared, but i usually prefer the PDF download anyway.
Paul
Thanks Paul,
I don't believe that link was there at the time of the original post. I knew about that link but I'm glad you posted it so others have access to it.
There is one issue that still remains: The links in the NOWS SBE documentation retrieve the OES2 SP2 documents. This is still to be resolved but at least we now have a way to retrieve the correct documents.

Upgraded OES2 SP1 to SP2 no GW Webaccess

Similar Messages

Maybe you are looking for