Upgraded OSX 10.3.9 to 10.4.10 eject key no longer works?

I recently upgraded my dual 800 MHz Power PC G4 from 10.3.9 to 10.4.10 and have had several small problems I am trying to work out as follows:
eject key will not work on apple pro keyboard....tried two other keyboards and none of them worked...you can eject the disc from iTunes and other software driven apps
can no longer print on CD's or DVD's to my Epson Stylus Photo 960 using Epson Print CD software and driver version 1.56 or new beta2 version 5.0.0...suspect this is a Classic problem as the software runs in Classic mode.
Any help would be much appreciated....I really need to use the eject key and would like to print on DVD's again!
Thanks
laundry

You have to hold the eject key for a few seconds unless you are using it in combination with another key.

Similar Messages

Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work. Does anyone have a remedy for this?

Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

HT1338 Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?

Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?

Use an earlier version of Firefox, use Safari, or upgrade to a later version of OS X. Any Intel Mac can run Snow Leopard.
Latest version of Safari for Leopard: http://support.apple.com/kb/DL1422
Information for Firefox: http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-power pc
http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-x-10-5

Upgraded OS from Windows 2000 to XP, now my Registration Key won't work

Any reason why my registration key won't work when I upgraded my OS from Windows 2000 to Windows XP? Oh, and I also upgraded the QuickTime application.

QuickTime 6.5 registration will not work with QuickTime 7.
You'll need to purchase a new "Pro" key or revert to QT 6.5 Pro.

Just upgraded from OSX 10.7.3 to 10.7.5. Safari no longer works

I just upgraded lion OSX 10.7.3 to 10.7.5 using the Software Update. All is fine except for Safari. When I try to use Safari, it crashes. The Safari app in Applications shows that is is dimmed out with a bar through it. Clicking on it I get the messge:
You can't use this version of the aaplication Safari.app with this version of Mac OS x
You have Mac OS X 10.7.5. The application requires Mac OS X 10.8 or later.
It is impossible to remove the Safari app, and so it does not allow reinstalling any other version of Safari.
How can I fix this problem?

Download and install OS X Lion Update 10.7.5 (Client Combo). This should fix your problem.
Your copy of Safari did not get updated which is the reason for the problem.

Yosemite upgrade: function keys no longer work, no keyboard lights and have to sign in twice after sleep mode. Anybody else having these problems?

Hi,
Since I did the Yosemite 'upgrade' last week I have been having problems with my MacBook Pro that never happened before. The most frustrating problems involve my keyboard which doesn't light up (checked my settings and they are correct) and the top row of function keys don't do anything so I can't adjust the volume, brightness, etc. Then if my screen goes into sleep mode, when I wake it back up I have to sign back in twice - I never had to sign in at all after sleep mode before.
I'm finding that in order to get it working properly I am having to completely shut down and start up again but when the keyboard problems are happening I can't get anything on the apple dropdown to work either (i.e. shut down, restart, etc) so I can only shut down by pressing and holding the on/off button.
I've never had problems with my Macbook before and feel like Apple have completely ruined it in one update! I've had a look through other posts on here but can't find anybody else having these problems so I would be really grateful if anyone could help me and offer me some advice on how to sort it out.
Thanks!

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

I have just upgraded from MAVERICKS to YOSEMITE. My ageing EPSON CX3600 will no longer work. APPLE support gave me advice which did not work. How do I progress short of buying a new printer?

I have just upgraded from MAVERICKS to YOSEMITE OS 10.10. I have 4GB of memory.
Since upgrading my ageing EPSON CX3600 will no longer print. I get the error message ;COMMUNICATION ERROR.
Apple support gave me advice which hasn't worked including deleting the printer via system preferences and rhen restoring it after rebooting the system
Any ideas please.

Epson Stylus CX3600
Epson Stylus CX3600 : Drivers & Software
There is also a driver for it at
Gutenprint for Mac OS X

I upgraded my first gen iPad to iOS 5.1 and wifi no longer works.

This is the weirdest problem. I can see the networks available. I appear to connect to them, and can see signal strength bars. When I try to use that connection, nothing works. I can't access URLs through safari, I can't get to YouTube or iTunes, I can't download email ... nothing. I've tried this on multiple networks and all are the same. Does anyone have any suggestions for a fix ... Or a way to revert to 5.0.1?
BTW, 3G works just fine, but I have to disable wifi in order to drop back into 3G mode.

I just updated my original iPad 32 GB WiFi to iOS 5.1 about fifteen minutes ago. But I did it with the system restore feature in iTunes. So it wiped out everything on my iPad. But it did work. Then I restored an earlier backup and all went fine. Maybe you could try backing up your iPad and then using Restore to get it back to factory settings to see what happens.

Since upgrading to ios 8.2 from 8.1.3 my phone no longer works reliably. How do I downgrade to 8.1.3

Network access comes and goes at the whim of the phone. Sometimes cellular data works and sometimes it doesn't. More often WiFi starts a visible download and then stops. Sometimes when I stop WiFi and enable cellular data it works - sometimes it doesn't. I need something that works. 8.1.3
worked - 8.2 doesn't

I don't know if it's possible to downgrade to an older version of iOS once you've updated. I know a lot of people have asked and if memory serves me right, I don't think it's possible...at least not without some tech skills and the risk voiding your warranty...

OSX 10.4.9 - Keyboard CD Drawer ejection key won't work

I've two G5 Power PC's. Neither cd drawers will open after the latest OS download from apple. Anyone else experiencing this?

The Eject key now requires a longer keystroke to open. Is that right?? On my Mac it still would not work.
After hours of searching the Net and checking all my settings I found that it would not work because I have Slow Keys on as an accessibility feature to assist me with typing as I have a tremor in my hands.
Not Happy Apple!! Now I can either have easier typing or a CD drawer that functions... go figure!
Mac G5 Mac OS X (10.4.9)

Screen saver no longer working after Lion upgrade.

Hi,
After standard upgrade about 2 weeks ago (mid July 2012) the screen saver no longer works. I mean I can certainly access the application and the desktop can be made to cycle through different photos etc. But when I configure the screen saver it just refuses to go into screen saver mode at all.
I'm not seeing too much occurance of this through the postings which is a bit worrisome as I'd thought this would be a much wider issue.
Cheers,
Herbie

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

Keyboard shortcuts no longer work after upgrade to ios 6

After upgrading to iOS 6, the keyboard shortcuts on my iPhone 4S no longer work. Not only that I can't change them either. If I add or delete a shortcut, it simply goes back to the way it was when I exit the settings and go back in. My iPad 2 doesn't have this problem, only my iPhone 4S.
I tried restarting as well as doing a reset (hold home and power button).
Any idea how to fix this?

If you want to go through all the steps I took:
1. Restart
2. Soft reset (hold home and power until Apple logo appears)
3. Reset keyboard dictionary
4. Reset all settings
5. Clear autofill
Only after the last step did things start working. Prior to that I couldn't make any changes I made to the keyboard shortcuts stick, though every now and then changes would take. Sometimes trying to delete a shortcut would crash the settings app. In all cases the shortcuts didn't work.

Apple Wireless Bluetooth Keyboard no longer works after OSX update

After installing the latest OSX update yesterday (something about iChat encryption), Apple Bluetooth Keyboard no longer works with my iMac.
When I restarted the iMac after installation was completed, the iMac would no longer recognise my Bluetooth Apple wireless keyboard. I've tried with 2 other Apple wireless keyboards as well, but to no avail. None of them work with the iMac any longer. All 3 keyboards work with my PowerMac Quad G5 though.
The iMac "sees" the keyboards, but the pairing doesn't go through because the iMac doesn't seem to recognise the keystrokes when entering the pairing code.
I had to go out and buy myself a Microsoft wired keyboard to be able to restart the iMac (couldn't enter the login password without a keyboard).
My bluetooth mighty mouse works flawlessly though.
Very frustrating. Can anyone help?
...tt
iMac 24" 2.33GHz 3GB Mac OS X (10.4.8)

And yes I checked the batteries.

Remote no longer works with HP TouchSmart 600 after Windows 8.1 Upgrade

I upgraded to Windows 8.1 only to find my remote control no longer works. Nor do the volume controls built into the side of the TouchSmart computer work after the upgrade.
The keyboard based volume controls have continued to work after the upgrade.
Any solutions?
This question was solved.
View Solution.

HI Dirko99:
Welcome to the HP forum!
Thank you for your query. I am pleased to assist you to the best of my ability!
I understand that after upgrading to Windows 8.1, your remote control does not work, or the volume control built into the side of the computer. HP does not have updated drivers for Windows 8.1 and your computer. Downloading or Updating Software and Drivers for HP Computers. You could try the built in troubleshooter, to aid in resolving issues. Follow these steps to run the troubleshooter:
a. Press Windows key + C on your keyboard to show the Charms bar.
b. Type Troubleshooting and click Troubleshooting under Settings.
c. Now type Hardware Troubleshooter in the Search option.
d. Click on Hardware troubleshooter to run the troubleshooter.
Please let me know the outcome.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Home button on iPad2 no longer works after iOS 7 upgrade

I upgraded my iPad2 to iOS 7 today. The home button no longer works. I've powered it down and back up as well as restarted it but it's still not working. Any suggestion greatly appreciated.
About to fly to China and was looking forward to watching movies and reading on the long flight.
Thanks!

Hi SUSOA!
Try using the steps in the following article to address this issue:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Upgraded OSX 10.3.9 to 10.4.10 eject key no longer works?

Similar Messages

Maybe you are looking for