Upgraded service disabled one of my boxes

Yesterday I upgraded to HD Premier XF Triple Play. I was told it would include everything I already have including 3 cable boxes. As soon as the upgrade took place I lost service on the cable box in my bedroom. I spent a long time on the Chat Line trying to fix it and they told me it was because of an outage in my area. Really? The other two boxes work just fine and then I was told they would resend a signal but it would not be effective until overnight. Well, I have the same message on my tv saying the cable box is not longer active. Comcast doesn't seem to have an answer! Help

marygiles wrote:
Yesterday I upgraded to HD Premier XF Triple Play. I was told it would include everything I already have including 3 cable boxes. As soon as the upgrade took place I lost service on the cable box in my bedroom. I spent a long time on the Chat Line trying to fix it and they told me it was because of an outage in my area. Really? The other two boxes work just fine and then I was told they would resend a signal but it would not be effective until overnight. Well, I have the same message on my tv saying the cable box is not longer active. Comcast doesn't seem to have an answer! HelpSomeone missed provisioning that box.... Call back into Comcast and have them resend provisions and entitlements to the box that is not working.... You can try online chat here if phones are too busy: https://www.comcastsupport.com/ChatEntry/Protected.aspx

Similar Messages

I went to silence my iPhone 5s and had a box pop up--looked like one of those boxes telling me turning on Location Services would help--telling me I needed to change my password within 60 minutes.....I turned the phone off. Can anyone explain this to me?

I went to silence my iPhone 5s and had a box pop up--looked like one of those boxes telling me turning on Location Services would help--telling me I needed to change my password within 60 minutes.....I turned the phone off. Can anyone explain this to me?

I went to silence my iPhone 5s and had a box pop up--looked like one of those boxes telling me turning on Location Services would help--telling me I needed to change my password within 60 minutes.....I turned the phone off. Can anyone explain this to me?

TS4006 Can you remotely switch on location services from one device to another?

I have lost my iPhone with its location services switched off so when trying to use the find my iPhone facility it does not trace it displayijng the message Location services disabled. Can any one urgently help?

you shouldn't have to transfer the Apple Care because it is an insurance on the iPod
No, it is not insurance.
and since it will cover stolen iPods
It does not cover replacement of a stolen iPod.
if should be transfered automatically because, also in theory, it is the same iPod.
There's no "theory" to it at all. It is the same iPod.
AppleCare is purchased for a specific iPod. The AppleCare stays with that iPod.

Unable to start Lync 2013 FE service on one of the pooled server, error "The evaluation period for Microsoft Lync Server 2013 has expired"

Team,
Unable to start FE service on one of the FE server, 2 Enterprise lync 2013 pool one FE in each pool, only following error in event vrw,
Log Name: Lync Server
Source: LS Server
Date: 12/30/2013 12:10:55 PM
Event ID: 12290
Task Category: (1000)
Level: Error
Keywords: Classic
User: N/A
Computer: ACS465-BH102.me.ykgw.net
Description:
The evaluation period has expired.
The evaluation period for Microsoft Lync Server 2013 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2013 has expired.
Resolution:
Please upgrade from the evaluation version to the licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Server" />
<EventID Qualifiers="50152">12290</EventID>
<Level>2</Level>
<Task>1000</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:10:55.000000000Z" />
<EventRecordID>73953</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: System
Source: Schannel
Date: 12/30/2013 12:13:36 PM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:13:36.779033200Z" />
<EventRecordID>83985</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="3668" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Server is already on Full version, ran Reset-CsPoolRegistrarState
for fillrest as wel as serviceret
Followed below as well,
http://social.technet.microsoft.com/Forums/lync/en-US/2a7e27ce-2dea-4e37-91ea-1ed42e110198/issue-updating-from-eval-to-volume-licenses?forum=ocsplanningdeployment
Currently done failover to another pool and users can login,
however i cant get the front end service on this server.Any pointers would be appreciated.
Praveen | MCSE Messaging 2003

rit, the command is not doing the trick since its already full version,
PS C:\Users\lyncadmin> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
only one server in one pool, total two pools.
Lync 2013 is on Win 2008 R2, and the event in system im inclining to since i have tried all,
Log Name: System
Source: Schannel
Date: 12/30/2013 9:26:34 AM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T06:26:34.877077500Z" />
<EventRecordID>64911</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="620" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Praveen | MCSE Messaging 2003

Upgrade service error after ZFD3 SP3 to ZFD4.01 upgrade

Hi,
Having upgraded from ZFD3.2 SP3 to ZFD4.01 and carefully following the
documentation instructions I still get the following error on the Inventory
Service startup screen:
"The Upgrade Service is migrating the schema
An error has occurred. The upgrade service is exiting now."
The Inv Srv object Server Status log says:
"1178: An error occured while performing the DBSchema migration
1177: Unable to complete all the operations, the upgrade service is exiting
with errors.
106: The Storer succesfully connected to the database
108:the database in not initialized as it is being upgraded"
All of these errors on the support site have as a fix either restart the
Inventory Service or contact Novell.
I've spent some hours now looking for a fix on Knowledgebase and in the Zen
forums but can't find anything useful. This is the second time I've run the
upgrade and this problem has occurred. I've reinstalled Zen3.2 from scratch,
applied SP1 and SP3.
I've checked policies and database objects, all appears as it should be.
These seem to be the relevant errors from the log files:
Migration Log:
Migration Exception Message->Could not add the dbspace..ASA Error -121:
Permission denied: unable to create the dbspace file "CIM10",
SQLState->42501, ErrorCode->262
Zenworksinvservice log file:
[12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true) failed
in AlterProcedure
[12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or ZFS3.0
SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
again
See full logs below.
Is there no option but to go straight to Novell?
Regards,
Steve Law
zenworksinvservice-041202123653303.txt
[12/2/04 12:36:53.280] ZENInv - Service Loader: getAttributesofDN:
Attributes of:
[12/2/04 12:36:53.349] ZENInv - Service Loader:
getAttributes:Attributes={zeninvhostserver=zeninvH ostServer: Distinguished
Name CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, zeninvrole=zeninvRole: Integer 25}
[12/2/04 12:36:53.358] ZENInv - Service Loader: Logout from NDS returnedtrue
[12/2/04 12:36:53.725] ZENInv - Server Config: The severconfig service start
is pending...
[12/2/04 12:36:53.784] ZENInv - Server Config: getAttributesofDN: Attributes
of:
[12/2/04 12:36:53.827] ZENInv - Server Config:
getAttributes:Attributes={zeninvscanfilepath=zenin vScanFilePath: Case Ignore
String \\SERVER1\DATA\Zenworks\ScanDir, zeninvrole=zeninvRole: Integer 25,
zeninvcomponentstatus=zeninvComponentStatus: 4.0 12 0}
[12/2/04 12:36:53.832] ZENInv - Server Config: Logout from NDS returnedtrue
[12/2/04 12:36:53.838] ZENInv - Server Config: Getting Cascade INit time
[12/2/04 12:36:54.844] ZENInv - Server Config: Database Location Policy DN
is CN=Zen32 Server Package:General:ZENworks
Database.OU=Policies.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:36:54.887] ZENInv - Server Config: getAttributesofDN: Attributes
of:
[12/2/04 12:36:54.918] ZENInv - Server Config:
getAttributes:Attributes={zenlocdatabaseobject=zen locDatabaseObject:
Distinguished Name CN=SERVER1_invDatabase.OU=BMO.OU=UK.O=OURTREE}
[12/2/04 12:36:54.923] ZENInv - Server Config: Logout from NDS returnedtrue
[12/2/04 12:36:54.967] ZENInv - Server Config: getAttributesofDN: Attributes
of:
[12/2/04 12:36:55.001] ZENInv - Server Config:
getAttributes:Attributes={zendbpassword=zendbPassw ord: novell,
zendbjdbcprotocol=zendbJDBCProtocol: jdbc:,
zendbdatabasetype=zendbDatabaseType: Integer 0,
zendbjdbcsidservice=zendbJDBCSIDService: 11.32.25.98, zendburl=zendbURL:
Case Ignore String
jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4,
zendbjdbcsubname=zendbJDBCSubName: Tds:, zendbjdbcdriver=zendbJDBCDriver:
com.sybase.jdbc.SybDriver, host server=Host Server: Distinguished Name
CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, network address=Network Address: 13;20;,
zendbuser=zendbUser: MW_DBA, zendbjdbcsubprotocol=zendbJDBCSubProtocol:
sybase:, zendbjdbcport=zendbJDBCPort: 2638}
[12/2/04 12:36:55.013] ZENInv - Server Config: Logout from NDS returnedtrue
[12/2/04 12:36:56.297] ZENInv - Server Config: The severconfig service is
started...
[12/2/04 12:36:56.320] ZENInv - Sync Scheduler: The scheduler service start
is pending...
[12/2/04 12:36:56.382] ZENInv - Sync Scheduler: getAttributesofDN:
Attributes of:
[12/2/04 12:36:56.459] ZENInv - Sync Scheduler:
getAttributes:Attributes={zeninvsyncrepeatinterval =zeninvSyncRepeatInterval:
>
[12/2/04 12:36:56.463] ZENInv - Sync Scheduler: Logout from NDS returnedtrue
[12/2/04 12:36:56.585] ZENInv - Sync Scheduler: This is the schedule
fetchedRun Daily: Monday, Tuesday, Wednesday, Thursday, Friday From 00:00:00
To 22:55:00 (Randomly dispatch during time period)
[12/2/04 12:36:56.597] ZENInv - Sync Scheduler: fetchSchedule returned: true
[12/2/04 12:36:56.597] ZENInv - Sync Scheduler: Schedule Fired
[12/2/04 12:36:56.597] ZENInv - Sync Scheduler: The scheduler service is
started...
[12/2/04 12:36:56.721] ZenInv - Upgrade Service: getAttributesofDN:
Attributes of:
[12/2/04 12:36:56.752] ZenInv - Upgrade Service:
getAttributes:Attributes={zeninvcomponentstatus=ze ninvComponentStatus: 4.0
12 0}
[12/2/04 12:36:56.756] ZenInv - Upgrade Service: Logout from NDS
returnedtrue
[12/2/04 12:36:56.758] ZenInv - Upgrade Service: Info : Read
zenInvComponentStatus = 4.0 12 0
[12/2/04 12:36:56.758] ZenInv - Upgrade Service: Inventory Server
zenInvComponentStatus = 4.0 12 0
[12/2/04 12:36:56.789] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.desktop.inventory.strconverte r.STRConverterServiceInit'
[12/2/04 12:36:56.815] ZENInv - STRConverter: Start with
'ServiceStatusChangeListener' invoked
[12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true) failed
in AlterProcedure
[12/2/04 12:37:04.807] ZENInv - Status Reporting: Messages are written into
XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:04.845] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:04.881] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-O j,
"- l, "Tw s, "Ty T, "T j, "T-
l, " s, " T, "6 j, "9Y l}
[12/2/04 12:37:04.898] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:04.912] ZENInv - Status Reporting: Number of records to add
are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:04.951] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:04.984] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-O j,
"- l, "Tw s, "Ty T, "T j, "T-
l, " s, " T, "6 j, "9Y l}
[12/2/04 12:37:04.990] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:04.991] ZENInv - Status Reporting: Adding record 0 for
DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.113] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.209] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.246] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:05.277] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
"Tw s, "Ty T, "T j, "T- l, "
s, " T, "6 j, "9Y l, "~; s}
[12/2/04 12:37:05.284] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.285] ZENInv - Status Reporting: Number of modified records
are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or ZFS3.0
SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
again
[12/2/04 12:37:05.288] ZENInv - Status Reporting: Messages are written into
XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.326] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:05.358] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
"Tw s, "Ty T, "T j, "T- l, "
s, " T, "6 j, "9Y l, "~; s}
[12/2/04 12:37:05.364] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.365] ZENInv - Status Reporting: Number of records to add
are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.403] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:05.435] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
"Tw s, "Ty T, "T j, "T- l, "
s, " T, "6 j, "9Y l, "~; s}
[12/2/04 12:37:05.441] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.445] ZENInv - Status Reporting: Adding record 0 for
DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.568] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.670] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.707] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:05.738] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
"Ty T, "T j, "T- l, " s, "
T, "6 j, "9Y l, "~; s, "s? T}
[12/2/04 12:37:05.747] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.748] ZENInv - Status Reporting: Number of modified records
are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, Running EnumModifier in integrated mode with
upgradeService
[12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbDriver:com.sybase.jdbc.SybDriver
[12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables,
dbURL:jdbc:sybase:Tds:11.32.25.98:2638?ServiceName =mgmtdb&JCONNECT_VERSION=4
[12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbType:0
[12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbUser:MW_DBA
[12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbPasswd:novell
[12/2/04 12:37:06.844] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.desktop.inventory.selector.Se lectorServiceInit'
[12/2/04 12:37:07.046] ZENInv - Selector: Selector Services Started
Successfully
[12/2/04 12:37:07.046] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.desktop.inventory.storer.Stor erServiceInit'
[12/2/04 12:37:07.062] ZENInv - Selector: Selector Code Profiling disabled
[12/2/04 12:37:07.067] ZENInv - Storer: Start with
'ServiceStatusChangeListener' invoked
[12/2/04 12:37:17.010] ZENInv - Selector: Getting ServerConfig HashTable
[12/2/04 12:37:17.010] ZENInv - Selector: Getting InvServiceObj from
HashTable
[12/2/04 12:37:17.011] ZENInv - Selector: Getting NDSTree from ServiceObject
[12/2/04 12:37:17.013] ZENInv - Selector: NDSTree=null
[12/2/04 12:37:17.014] ZENInv - Selector: Getting InventoryServiceDN from
ServiceObject
[12/2/04 12:37:17.014] ZENInv - Selector:
InventoryServiceDN=CN=SERVER1_ZenInvService.OU=BMO .OU=UK.O=OURTREE
[12/2/04 12:37:17.014] ZENInv - Selector: Getting ScanDir from ServiceObject
[12/2/04 12:37:17.015] ZENInv - Selector: ScanDir=DATA:\Zenworks\ScanDir
[12/2/04 12:37:17.021] ZENInv - Selector: NEW SyncServiceTable Constructor
Invoked
[12/2/04 12:37:17.022] ZENInv - Selector: Creating-Verifying
Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.022] ZENInv - Selector: Checking for
DATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.023] ZENInv - Selector: synchTableDir exists. Check wether
this is a directory or File
[12/2/04 12:37:17.024] ZENInv - Storer: Storer from dblocation user: MW_DBA
driver: com.sybase.jdbc.SybDriver protocol: jdbc:sybase: subname: Tds: port:
2638
[12/2/04 12:37:17.024] ZENInv - Selector: Directory
ExistsDATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.024] ZENInv - Selector: Directory Existence
ConfirmedDATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.025] ZENInv - Selector: Serialize-Deserialize File
DATA:\Zenworks\ScanDir\stable\STABLE.SER
[12/2/04 12:37:17.025] ZENInv - Selector: Initializing SyncServiceTable
[12/2/04 12:37:17.025] ZENInv - Selector: SynchTable Does not Exist
[12/2/04 12:37:17.026] ZENInv - Selector: Attempting to Load SynchTable From
Serialized File
[12/2/04 12:37:17.026] ZENInv - Selector: DeSerializing hashTable
FromDATA:\Zenworks\ScanDir\stable\STABLE.SER
[12/2/04 12:37:17.029] ZENInv - Storer: url[From DBObject]:
jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4
[12/2/04 12:37:17.035] ZENInv - Storer: wsdn:
CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREEi = 0
[12/2/04 12:37:17.037] ZENInv - Selector: DeSerializing SyncService
HashTable
[12/2/04 12:37:17.041] ZENInv - Selector: SynchTable Loaded Sucessfully From
Serialized File
[12/2/04 12:37:17.042] ZENInv - Selector: Getting hasDatabase status from
ServiceObject
[12/2/04 12:37:17.042] ZENInv - Selector: hasDatabase is true from
ServiceObject
[12/2/04 12:37:17.042] ZENInv - Selector: Getting isStandAlone status from
ServiceObject
[12/2/04 12:37:17.043] ZENInv - Selector: isStandAlone is true from
ServiceObject
[12/2/04 12:37:17.043] ZENInv - Selector: ConvDir
DATA:\Zenworks\ScanDir\conv\
[12/2/04 12:37:17.044] ZENInv - Selector: ConvDir exists. Check wether this
is a directory or File
[12/2/04 12:37:17.044] ZENInv - Selector: DATA:\Zenworks\ScanDir
[12/2/04 12:37:17.045] ZENInv - Selector: DATA:\Zenworks\ScanDir\DbDir
[12/2/04 12:37:17.045] ZENInv - Selector:
[12/2/04 12:37:17.048] ZENInv - Selector: Getting SELECTOR_STORER Synch
Object
[12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_COLLECTOR Synch
Object
[12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_CONVERTER Synch
Object
[12/2/04 12:37:17.049] ZENInv - Selector: Getting CONVERTER_SELECTOR Synch
Object
[12/2/04 12:37:17.050] ZENInv - Selector: Getting SYNCHSERVICE_SELECTOR
Synch Object
[12/2/04 12:37:17.061] ZENInv - Storer: Loading Storer test properties file
[12/2/04 12:37:17.080] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.common.inventory.scancollecto r.ScanCollector'
[12/2/04 12:37:17.338] ZENInv - IFS Server: zenInvScanCollector:
FileServiceController: Startup Properties: {chunksize=4096,
lockfactory=com.novell.zenworks.common.inventory.i fs.utils.MemoryFileLockFac
tory, lockseed=ScanSelectorLock, transfers=100,
rootdirectory=DATA:\Zenworks\ScanDir, timeout=60000,
servicename=zenInvScanCollector, portnumber=0}
[12/2/04 12:37:17.499] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.desktop.inventory.InvSyncServ ice.ManagableSyncService'
[12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: SyncService thread
started
[12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: NEW SyncServiceTable
Constructor Invoked
[12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Creating-Verifying
Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Checking for
DATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: synchTableDir
exists. Check wether this is a directory or File
[12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: Directory
ExistsDATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.586] ZENInv - Inventory Sync Service: Directory Existence
ConfirmedDATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.586] ZENInv - Inventory Sync Service:
Serialize-Deserialize File DATA:\Zenworks\ScanDir\stable\STABLE.SER
[12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Initializing
SyncServiceTable
[12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Will Use the
existing SyncServiceTable
[12/2/04 12:37:18.445] ZENInv - Status Reporting: Messages are written into
XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:18.484] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:18.520] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
"Ty T, "T j, "T- l, " s, "
T, "6 j, "9Y l, "~; s, "s? T}
[12/2/04 12:37:18.525] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:18.526] ZENInv - Status Reporting: Number of records to add
are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:18.564] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:18.595] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
"Ty T, "T j, "T- l, " s, "
T, "6 j, "9Y l, "~; s, "s? T}
[12/2/04 12:37:18.600] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:18.601] ZENInv - Status Reporting: Adding record 0 for
DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:18.699] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:18.783] ZENInv - Status Reporting: Logout from NDS
returnedtrue
Migration Log
Starting the AlterProcedure Log at 2004-12-02 11:45:29.731
Unzipping the file migrate.zip
Transforming the Migration SQL files...
...3
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Initial_0
is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
nPotsModem_1 is done with 545 0x03010c0a010202
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
nOperatingSystem_2 is done with 143 0x03010e02
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
nNetworkAdapter_3 is done with 544 0x03010c0b04
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
nDiskDrive_4 is done with 543 0x03010c080301
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Wi
nOperatingSystem_5 is done with 547 0x03010e0201
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\zenworks_vi
deoadapter_6 is done with 53 0x03010c030c0201
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Sy
stemInfo_7 is done with 228 0x03020404
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_so
undadapter_8 is done with 546 0x03010c16
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Mo
therboard_9 is done with 221 0x0302040101
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Lo
gicalDiskDrive_10 is done with 113 0x03010c110402
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
ventoryscanner_11 is done with 181 0x03011402
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
stalleddriver_12 is done with 548 0x2701
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_In
stalledDirectory_13 is done with 551 0x4a
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bu
s_14 is done with 35 0x03010c0301
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bi
os_15 is done with 180 0x0301140101
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
CurrentLoginUser_16 is done with 549 0x48
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
LastLoginUser_17 is done with 550 0x49
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
User_18 is done with 205 0x03011a
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\misc_19 is
copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybcustom_2
0 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybdelprocs
_21 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybextended
_22 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybrmaudit_
23 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\CIM_Process
or_24 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ne
twareOperatingSystem_24 is done with 142 0x03010e01
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\indytoprom_
26 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Post_30 is
copied
Starting Schema Migration
Adding the extra db spaces...
SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM9%'
has the results
File_NAME=mgmtdb9.db
dbfile's base directory =
SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM10%'
CREATE DBSPACE CIM10 AS 'mgmtdb10.db'
Totaltime taken for Schema Migration : 149
Migration Exception Message->Could not add the dbspace..ASA Error -121:
Permission denied: unable to create the dbspace file "CIM10",
SQLState->42501, ErrorCode->262

I am getting identical errors with NW6.5 SP3, edir 8.7.3.6 upgrading from
ZFD4.01 to ZFD6.5. Haven't found any knowledgebase items on it.
Thanks,
Doug Streit
> Extra info: this is a NW6.5 SP2 server with edir 8.7.3.3, Sybase database.
>
> "SLaw" <[email protected]> wrote in message
> news:[email protected]...
> > Hi,
> >
> > Having upgraded from ZFD3.2 SP3 to ZFD4.01 and carefully following the
> > documentation instructions I still get the following error on the
> Inventory
> > Service startup screen:
> >
> > "The Upgrade Service is migrating the schema
> > An error has occurred. The upgrade service is exiting now."
> >
> > The Inv Srv object Server Status log says:
> >
> > "1178: An error occured while performing the DBSchema migration
> > 1177: Unable to complete all the operations, the upgrade service is
> exiting
> > with errors.
> > 106: The Storer succesfully connected to the database
> > 108:the database in not initialized as it is being upgraded"
> >
> > All of these errors on the support site have as a fix either restart the
> > Inventory Service or contact Novell.
> >
> > I've spent some hours now looking for a fix on Knowledgebase and in the
> Zen
> > forums but can't find anything useful. This is the second time I've run
> the
> > upgrade and this problem has occurred. I've reinstalled Zen3.2 from
> scratch,
> > applied SP1 and SP3.
> > I've checked policies and database objects, all appears as it should be.
> >
> >
> > These seem to be the relevant errors from the log files:
> >
> > Migration Log:
> > Migration Exception Message->Could not add the dbspace..ASA Error -121:
> > Permission denied: unable to create the dbspace file "CIM10",
> > SQLState->42501, ErrorCode->262
> >
> > Zenworksinvservice log file:
> > [12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true)
> failed
> > in AlterProcedure
> > [12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or
> ZFS3.0
> > SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
> > again
> >
> > See full logs below.
> >
> > Is there no option but to go straight to Novell?
> >
> > Regards,
> >
> >
> > Steve Law
> >
> > zenworksinvservice-041202123653303.txt
> > *********************************
> > [12/2/04 12:36:53.280] ZENInv - Service Loader: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:36:53.349] ZENInv - Service Loader:
> > getAttributes:Attributes={zeninvhostserver=zeninvH ostServer: Distinguished
> > Name CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, zeninvrole=zeninvRole: Integer 25}
> > [12/2/04 12:36:53.358] ZENInv - Service Loader: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:53.725] ZENInv - Server Config: The severconfig service
> start
> > is pending...
> > [12/2/04 12:36:53.784] ZENInv - Server Config: getAttributesofDN:
> Attributes
> > of:
> > [12/2/04 12:36:53.827] ZENInv - Server Config:
> > getAttributes:Attributes={zeninvscanfilepath=zenin vScanFilePath: Case
> Ignore
> > String \\SERVER1\DATA\Zenworks\ScanDir, zeninvrole=zeninvRole: Integer 25,
> > zeninvcomponentstatus=zeninvComponentStatus: 4.0 12 0}
> > [12/2/04 12:36:53.832] ZENInv - Server Config: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:53.838] ZENInv - Server Config: Getting Cascade INit time
> > [12/2/04 12:36:54.844] ZENInv - Server Config: Database Location Policy
> DN
> > is CN=Zen32 Server Package:General:ZENworks
> > Database.OU=Policies.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:36:54.887] ZENInv - Server Config: getAttributesofDN:
> Attributes
> > of:
> > [12/2/04 12:36:54.918] ZENInv - Server Config:
> > getAttributes:Attributes={zenlocdatabaseobject=zen locDatabaseObject:
> > Distinguished Name CN=SERVER1_invDatabase.OU=BMO.OU=UK.O=OURTREE}
> > [12/2/04 12:36:54.923] ZENInv - Server Config: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:54.967] ZENInv - Server Config: getAttributesofDN:
> Attributes
> > of:
> > [12/2/04 12:36:55.001] ZENInv - Server Config:
> > getAttributes:Attributes={zendbpassword=zendbPassw ord: novell,
> > zendbjdbcprotocol=zendbJDBCProtocol: jdbc:,
> > zendbdatabasetype=zendbDatabaseType: Integer 0,
> > zendbjdbcsidservice=zendbJDBCSIDService: 11.32.25.98, zendburl=zendbURL:
> > Case Ignore String
> > jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4,
> > zendbjdbcsubname=zendbJDBCSubName: Tds:, zendbjdbcdriver=zendbJDBCDriver:
> > com.sybase.jdbc.SybDriver, host server=Host Server: Distinguished Name
> > CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, network address=Network Address:
> 13;20;,
> > zendbuser=zendbUser: MW_DBA, zendbjdbcsubprotocol=zendbJDBCSubProtocol:
> > sybase:, zendbjdbcport=zendbJDBCPort: 2638}
> > [12/2/04 12:36:55.013] ZENInv - Server Config: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:56.297] ZENInv - Server Config: The severconfig service is
> > started...
> > [12/2/04 12:36:56.320] ZENInv - Sync Scheduler: The scheduler service
> start
> > is pending...
> > [12/2/04 12:36:56.382] ZENInv - Sync Scheduler: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:36:56.459] ZENInv - Sync Scheduler:
> >
> getAttributes:Attributes={zeninvsyncrepeatinterval =zeninvSyncRepeatInterval:
> > >
> > }
> > [12/2/04 12:36:56.463] ZENInv - Sync Scheduler: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:56.585] ZENInv - Sync Scheduler: This is the schedule
> > fetchedRun Daily: Monday, Tuesday, Wednesday, Thursday, Friday From
> 00:00:00
> > To 22:55:00 (Randomly dispatch during time period)
> > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: fetchSchedule returned:
> true
> > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: Schedule Fired
> > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: The scheduler service is
> > started...
> > [12/2/04 12:36:56.721] ZenInv - Upgrade Service: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:36:56.752] ZenInv - Upgrade Service:
> > getAttributes:Attributes={zeninvcomponentstatus=ze ninvComponentStatus: 4.0
> > 12 0}
> > [12/2/04 12:36:56.756] ZenInv - Upgrade Service: Logout from NDS
> > returnedtrue
> > [12/2/04 12:36:56.758] ZenInv - Upgrade Service: Info : Read
> > zenInvComponentStatus = 4.0 12 0
> > [12/2/04 12:36:56.758] ZenInv - Upgrade Service: Inventory Server
> > zenInvComponentStatus = 4.0 12 0
> > [12/2/04 12:36:56.789] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> > 'com.novell.zenworks.desktop.inventory.strconverte r.STRConverterServiceIni
> t'
> > [12/2/04 12:36:56.815] ZENInv - STRConverter: Start with
> > 'ServiceStatusChangeListener' invoked
> > [12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true)
> failed
> > in AlterProcedure
> > [12/2/04 12:37:04.807] ZENInv - Status Reporting: Messages are written
> into
> > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:04.845] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:04.881] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-�O
> j,
> > "-�� l, "Tw� �s, "Ty� �T, "T�� j, "T�-
> > l, "�� s, "� �T, "�6� j, "�9Y l}
> > [12/2/04 12:37:04.898] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:04.912] ZENInv - Status Reporting: Number of records to add
> > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:04.951] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:04.984] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-�O
> j,
> > "-�� l, "Tw� �s, "Ty� �T, "T�� j, "T�-
> > l, "�� s, "� �T, "�6� j, "�9Y l}
> > [12/2/04 12:37:04.990] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:04.991] ZENInv - Status Reporting: Adding record 0 for
> > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.113] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.209] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.246] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:05.277] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
> l,
> > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
> > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
> > [12/2/04 12:37:05.284] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.285] ZENInv - Status Reporting: Number of modified
> records
> > are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or
> ZFS3.0
> > SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
> > again
> > [12/2/04 12:37:05.288] ZENInv - Status Reporting: Messages are written
> into
> > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.326] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:05.358] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
> l,
> > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
> > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
> > [12/2/04 12:37:05.364] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.365] ZENInv - Status Reporting: Number of records to add
> > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.403] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:05.435] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
> l,
> > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
> > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
> > [12/2/04 12:37:05.441] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.445] ZENInv - Status Reporting: Adding record 0 for
> > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.568] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.670] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.707] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:05.738] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
> �s,
> > "Ty� �T, "T�� j, "T�- l, "�� s, "�
> > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
> > [12/2/04 12:37:05.747] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.748] ZENInv - Status Reporting: Number of modified
> records
> > are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, Running EnumModifier in integrated mode with
> > upgradeService
> > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, dbDriver:com.sybase.jdbc.SybDriver
> > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables,
> >
> dbURL:jdbc:sybase:Tds:11.32.25.98:2638?ServiceName =mgmtdb&JCONNECT_VERSION=4
> > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, dbType:0
> > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, dbUser:MW_DBA
> > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, dbPasswd:novell
> > [12/2/04 12:37:06.844] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> > 'com.novell.zenworks.desktop.inventory.selector.Se lectorServiceInit'
> > [12/2/04 12:37:07.046] ZENInv - Selector: Selector Services Started
> > Successfully
> > [12/2/04 12:37:07.046] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> > 'com.novell.zenworks.desktop.inventory.storer.Stor erServiceInit'
> > [12/2/04 12:37:07.062] ZENInv - Selector: Selector Code Profiling disabled
> > [12/2/04 12:37:07.067] ZENInv - Storer: Start with
> > 'ServiceStatusChangeListener' invoked
> > [12/2/04 12:37:17.010] ZENInv - Selector: Getting ServerConfig HashTable
> > [12/2/04 12:37:17.010] ZENInv - Selector: Getting InvServiceObj from
> > HashTable
> > [12/2/04 12:37:17.011] ZENInv - Selector: Getting NDSTree from
> ServiceObject
> > [12/2/04 12:37:17.013] ZENInv - Selector: NDSTree=null
> > [12/2/04 12:37:17.014] ZENInv - Selector: Getting InventoryServiceDN from
> > ServiceObject
> > [12/2/04 12:37:17.014] ZENInv - Selector:
> > InventoryServiceDN=CN=SERVER1_ZenInvService.OU=BMO .OU=UK.O=OURTREE
> > [12/2/04 12:37:17.014] ZENInv - Selector: Getting ScanDir from
> ServiceObject
> > [12/2/04 12:37:17.015] ZENInv - Selector: ScanDir=DATA:\Zenworks\ScanDir
> > [12/2/04 12:37:17.021] ZENInv - Selector: NEW SyncServiceTable Constructor
> > Invoked
> > [12/2/04 12:37:17.022] ZENInv - Selector: Creating-Verifying
> > Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.022] ZENInv - Selector: Checking for
> > DATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.023] ZENInv - Selector: synchTableDir exists. Check
> wether
> > this is a directory or File
> > [12/2/04 12:37:17.024] ZENInv - Storer: Storer from dblocation user:
> MW_DBA
> > driver: com.sybase.jdbc.SybDriver protocol: jdbc:sybase: subname: Tds:
> port:
> > 2638
> > [12/2/04 12:37:17.024] ZENInv - Selector: Directory
> > ExistsDATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.024] ZENInv - Selector: Directory Existence
> > ConfirmedDATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.025] ZENInv - Selector: Serialize-Deserialize File
> > DATA:\Zenworks\ScanDir\stable\STABLE.SER
> > [12/2/04 12:37:17.025] ZENInv - Selector: Initializing SyncServiceTable
> > [12/2/04 12:37:17.025] ZENInv - Selector: SynchTable Does not Exist
> > [12/2/04 12:37:17.026] ZENInv - Selector: Attempting to Load SynchTable
> From
> > Serialized File
> > [12/2/04 12:37:17.026] ZENInv - Selector: DeSerializing hashTable
> > FromDATA:\Zenworks\ScanDir\stable\STABLE.SER
> > [12/2/04 12:37:17.029] ZENInv - Storer: url[From DBObject]:
> > jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4
> > [12/2/04 12:37:17.035] ZENInv - Storer: wsdn:
> > CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREEi = 0
> > [12/2/04 12:37:17.037] ZENInv - Selector: DeSerializing SyncService
> > HashTable
> > [12/2/04 12:37:17.041] ZENInv - Selector: SynchTable Loaded Sucessfully
> From
> > Serialized File
> > [12/2/04 12:37:17.042] ZENInv - Selector: Getting hasDatabase status from
> > ServiceObject
> > [12/2/04 12:37:17.042] ZENInv - Selector: hasDatabase is true from
> > ServiceObject
> > [12/2/04 12:37:17.042] ZENInv - Selector: Getting isStandAlone status from
> > ServiceObject
> > [12/2/04 12:37:17.043] ZENInv - Selector: isStandAlone is true from
> > ServiceObject
> > [12/2/04 12:37:17.043] ZENInv - Selector: ConvDir
> > DATA:\Zenworks\ScanDir\conv\
> > [12/2/04 12:37:17.044] ZENInv - Selector: ConvDir exists. Check wether
> this
> > is a directory or File
> > [12/2/04 12:37:17.044] ZENInv - Selector: DATA:\Zenworks\ScanDir
> > [12/2/04 12:37:17.045] ZENInv - Selector: DATA:\Zenworks\ScanDir\DbDir
> > [12/2/04 12:37:17.045] ZENInv - Selector:
> > [12/2/04 12:37:17.048] ZENInv - Selector: Getting SELECTOR_STORER Synch
> > Object
> > [12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_COLLECTOR Synch
> > Object
> > [12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_CONVERTER Synch
> > Object
> > [12/2/04 12:37:17.049] ZENInv - Selector: Getting CONVERTER_SELECTOR Synch
> > Object
> > [12/2/04 12:37:17.050] ZENInv - Selector: Getting SYNCHSERVICE_SELECTOR
> > Synch Object
> > [12/2/04 12:37:17.061] ZENInv - Storer: Loading Storer test properties
> file
> > [12/2/04 12:37:17.080] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> > 'com.novell.zenworks.common.inventory.scancollecto r.ScanCollector'
> > [12/2/04 12:37:17.338] ZENInv - IFS Server: zenInvScanCollector:
> > FileServiceController: Startup Properties: {chunksize=4096,
> >
> lockfactory=com.novell.zenworks.common.inventory.i fs.utils.MemoryFileLockFac
> > tory, lockseed=ScanSelectorLock, transfers=100,
> > rootdirectory=DATA:\Zenworks\ScanDir, timeout=60000,
> > servicename=zenInvScanCollector, portnumber=0}
> > [12/2/04 12:37:17.499] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> >
> 'com.novell.zenworks.desktop.inventory.InvSyncServ ice.ManagableSyncService'
> > [12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: SyncService thread
> > started
> > [12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: NEW
> SyncServiceTable
> > Constructor Invoked
> > [12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Creating-Verifying
> > Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Checking for
> > DATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: synchTableDir
> > exists. Check wether this is a directory or File
> > [12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: Directory
> > ExistsDATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.586] ZENInv - Inventory Sync Service: Directory
> Existence
> > ConfirmedDATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.586] ZENInv - Inventory Sync Service:
> > Serialize-Deserialize File DATA:\Zenworks\ScanDir\stable\STABLE.SER
> > [12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Initializing
> > SyncServiceTable
> > [12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Will Use the
> > existing SyncServiceTable
> > [12/2/04 12:37:18.445] ZENInv - Status Reporting: Messages are written
> into
> > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:18.484] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:18.520] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
> �s,
> > "Ty� �T, "T�� j, "T�- l, "�� s, "�
> > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
> > [12/2/04 12:37:18.525] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:18.526] ZENInv - Status Reporting: Number of records to add
> > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:18.564] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:18.595] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
> �s,
> > "Ty� �T, "T�� j, "T�- l, "�� s, "�
> > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
> > [12/2/04 12:37:18.600] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:18.601] ZENInv - Status Reporting: Adding record 0 for
> > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:18.699] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:18.783] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> >
> > Migration Log
> > ***********
> > Starting the AlterProcedure Log at 2004-12-02 11:45:29.731
> > Unzipping the file migrate.zip
> > Transforming the Migration SQL files...
> > ..3
> > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Initial_0
> > is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
> > nPotsModem_1 is done with 545 0x03010c0a010202
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
> > nOperatingSystem_2 is done with 143 0x03010e02
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
> > nNetworkAdapter_3 is done with 544 0x03010c0b04
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
> > nDiskDrive_4 is done with 543 0x03010c080301
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Wi
> > nOperatingSystem_5 is done with 547 0x03010e0201
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\zenworks_vi
> > deoadapter_6 is done with 53 0x03010c030c0201
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Sy
> > stemInfo_7 is done with 228 0x03020404
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_so
> > undadapter_8 is done with 546 0x03010c16
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Mo
> > therboard_9 is done with 221 0x0302040101
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Lo
> > gicalDiskDrive_10 is done with 113 0x03010c110402
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
> > ventoryscanner_11 is done with 181 0x03011402
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
> > stalleddriver_12 is done with 548 0x2701
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_In
> > stalledDirectory_13 is done with 551 0x4a
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bu
> > s_14 is done with 35 0x03010c0301
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bi
> > os_15 is done with 180 0x0301140101
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
> > CurrentLoginUser_16 is done with 549 0x48
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
> > LastLoginUser_17 is done with 550 0x49
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
> > User_18 is done with 205 0x03011a
> > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\misc_19
> is
> > copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybcustom_2
> > 0 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybdelprocs
> > _21 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybextended
> > _22 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybrmaudit_
> > 23 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\CIM_Process
> > or_24 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ne
> > twareOperatingSystem_24 is done with 142 0x03010e01
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\indytoprom_
> > 26 is copied
> > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Post_30
> is
> > copied
> > Starting Schema Migration
> > Adding the extra db spaces...
> > SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM9%'
> > has the results
> > File_NAME=mgmtdb9.db
> > dbfile's base directory =
> > SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM10%'
> > CREATE DBSPACE CIM10 AS 'mgmtdb10.db'
> > Totaltime taken for Schema Migration : 149
> > Migration Exception Message->Could not add the dbspace..ASA Error -121:
> > Permission denied: unable to create the dbspace file "CIM10",
> > SQLState->42501, ErrorCode->262
> >
> >
>
>

Tiger - All Sahring Options/Services disabled, greyed out

Hello from Portugal!
I noticed that on System Preferences I had all my Sharing services disabled and cannot select any of them (greyed out). Also, the Firewall Tab was disabled to (greyed out), and I couldn't select it either. I noticed that as the first option (also greyed out) I had a new service called "M82" ( ? ) that I had never seen before.
1- So I did a Archive and Install from Tiger 10.4.0 original DVD to try to find out what update cause this strange behavior.
2- After that I updated from 10.4.0 to 10.4.11 (Combo update) with Software Update.
3- After that I checked the Sharing services and all was well and normal. I could select/activate all the Sharing Option and the Firewall Tab was back to normal again.
4- I returned to Software Update and Made the folowing updates/instalations:
. Java 1.3.1 and 1.4.2 Release 2 (2.0)
. QuickTime (7.6)
. Migration and DVD/CD Sharing (1.1)
. Safari 3.2.1
5- After the restart I checked again and all my Sharing services and Firewall Tab were once again disabled. Also, the mysterious new service "M82" (also disabled) was back again.
So the cause of this problem is one (or more) of the updates I made in step 4 (maybe not Safari 3.2.1).
What can I do to resolve this issue without having to install Tiger 10.4.0 again?
Thank you for your help!
pedro
Message was edited by: Pedro Taquelim

Thanks for your help BDAqua,
I modified my system language from Portuguese (Portugal) to english an all got back to normal.
altought it's a solution to resolve this specific problem, it's forces me t use english instead of my mother language. Not wise. I'm going to contact Apple to fix this.
Thanks again!
pedro

Multiple Web Services in one Jdeveloper project

Hi all,
I'm currently trying to implement a series of web services, all relating to one application. I'm using the top-down approach, where I generate the web service from a WSDL file, and add my implementation to the generated classes. The WSDL file imports all sorts of XML Schemas (xsd-files) and Jdeveloper correctly generates all the necessary java-classes for me. Lets call the first web service I create WS-1.
This all works fine and I'm a happy panda. I can call the web service, it works, I can modif the wsdl and regenerate the web service to e.g. change the input etc. All this works.
Just until the point where I want to create a second web service (lets call this WS-2). This new web service doesn't use all the XML Schemas that the first web service does, it is more simple with regards to in-/output. The problem arises when I modify WS-2 and Jdeveloper regenerates the Web service files (.java and the files in the WEB-INF/wsdl-directory). When I do this, it deletes the imported xsd-files that WS-1 uses (removes them from WEB-INF/wsdl).
And when I regenerate WS-1 to get my xsd-files in again, then when I regenerate WS-2 it imports all the unnecessary xsd-files into the wsdl for WS-2.
Something tells me, that there is a connection or shared library between all web services in one Jdeveloper project. That they all imports and uses the xsd-files in WEB-INF/wsdl.
Is this true? Can't I have multiple web services (and wsdl-files) using different types (schema definitions) in the the same Jdeveloper project?
One solution I can think of, is to have all my web services in different projects under the same application. But is this really necessary?
I'm using Jdeveloper 10.1.3.3.0.

Hi,
pure from a coder instinct I think I would prefer them to be in separate projects for better reuse and clean separation. If I need project 1 to access aclass from Project 2, I can check the dependency check box in the project properties. Is there any business requirement that makes you think having all of these in a single project will help ?
Frank
Btw.: I agree that JDeveloper shouldn't constraint developers from doing what they want and if this is a limitation the feel free to file a bug

Upgrading sap business one version 800232 is not allowed

Hi All
I got this error when I tried to run an upgrade from SBO 2007A PL 42 to SBO 8.8 PL3.
Any suggestions.
Regards
Bongani

Dear Bongani,
i found something for this Error i hope it help:
Zusammenfassung
Symptom
In the connection setting step or database selection step, the following error dialog appears: "Upgrade SAP Business One from version xxx is not allowed. Contact your SAP business partner for support."
Other terms
Upgrade Wizard, Upgrade Path, Restriction
Reason and Prerequisites
Application error
Due to the nature of development cycles, it takes some time for SAP Business One 8.8 to merge bug fixes from latest released install base patches. As a result, some upgrade paths are restricted in order to avoid data loss/duplicate upgrade in certain cases. For example: a bug fix is applied on 2007 A SP01 PL07 and merged with 8.8 PL05. If the database in 2007 A SP01 PL07 is upgraded to 8.8 PL04, the fix will be lost. In addition, there is a risk of data loss if the fix involves some metadata change. So 2007 A SP01 PL07 can only be merged with version 8.8 PL05 and higher.
Solution
SAP intends to provide a patch or patches in order to solve the problem described.
The section Reference to Related Notes below will list the specific patches once they become available. The corresponding Info file of the patches in SAP Service Marketplace will also show the SAP Note number.
Please note that these references can only be set at patch release date.
SAP will deliver patches only for selected releases at its own discretion, based on the business impact and the complexity of the implementation.
In addition to the bug fixes listed in this SAP Note, this patch contains also the bug fixes from:
SAP Business One 2007 A SP01 PL06,
SAP Business One 2007 B SP00 PL14.
For more details, please see the SAP Notes under the "Related Notes" tab.
IMPORTANT: Please note that if you are on a higher patch than the 2007A/2007B patch levels listed above and upgrades to 8.8, this may result in unexpected issues and potential data loss as the upgrade path is not supported yet.
Best regards,
Indira

Has anyone used Migration Assistant to move services from one system running Server to a new system?

So, I've purchased a Mac mini to replace my aging Mid 2009 mini on which I've been running Mavericks Server. In trying to answer the question of how best to move services from the old machine to the new, I've stumbled into the fact that Migration Assistant can apparently migrate not just user data for workstations and laptops, but also service data for servers. The problem is there isn't much detail in the docs about how good a job it does when going from one machine to another without changing OS releases. There's a very detailed document in the KB about going from older versions of Server to new (OS X Server: Upgrade and migration from Lion Server or Snow Leopard Server) and a general doc on migrating from another Mac under Mavericks (OS X: How to migrate data from another Mac using Mavericks) but that has no details about Server.
Has anyone used Migration Assistant to move services from one system running Server to a new system? Are there any details that are particularly important to get right? Are there things that require manual steps after Migration Assistant is done?
There are other ways I could tackle the problem, of course. I could simply swap drives between the systems, but the new system has two drives that are bigger, faster, and I intend to mirror them. That would complicate such an approach. I'd really like to keep the conversation constrained to a discussion of Migration Assistant as the primary method.

yes. I migrated a server frm lion to mavericks following these notes a while back:
OS X Server: Upgrade and migration from Mountain Lion
i do not recall having any problems with it.

Stuck in a loop (wont upgrade services successfully)

After Snow Leopard server is installed, I entered in the serial number, and it tells me it's "Setting Up ... Your server is being configured."
In the bottom left hand corner it tells me its "Migrating OD" etc. then that its "Upgrading services"
After a seemingly long wait it eventually tells me -
"An error occurred while configuring your server."
"The following actions failed or were not attempted:"
The list includes the locale, configuring just about every server defaults (Web, iCal, etc.), and "Setting up server"
Then it misleads me by saying "Your server needs to be restarted to complete setup." Which only leads to the whole process, and same errors happening all over again.
Any ideas or help would be appreciated.

I encountered something similar during one of my upgrade sequences a while back, and (like Nate Taylor) worked around it by using the Disk Utility clone I had made of the disk prior to the upgrade as an server data import source. I blanked the system disk, installed, and selected a configuration import from that disk. And yes, the problem and the symptoms and associated diagnostics were reported to Apple.

I lost my ipod touch when i moved flats and i just found it in one of the boxes after 4months and now its asking me to "connect to itunes" but itunes doesnt recognize it because i have a passcode and its asking me to enter it. HEEEEELP please.

I lost my ipod touch when i moved flats and i just found it in one of the boxes after 4months and now its asking me to "connect to itunes" but itunes doesnt recognize it because i have a passcode and its asking me to enter it. HEEEEELP please

Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

10.6.8 -- 10.9 Upgrade: hangs at "Upgrading services"

10.6.8 --> 10.9 Upgrade: hangs at Server App "Upgrading services"
Upgraded XServe-Early-2009 to Mavericks OS no problem. Albeit extremely slow (50min install, 2hr cataloging).
Initiating Server for 1st time renders a Hang at "Upgrading services" (left it for 1-1/2hrs).
Then computer claims hard disk is almost full, so I trashed a bunch of crap.
Force Quit (Server install) and Restart shows white screen.
Target FireWire in order to DiskWarrior and Repair Permissions brought XServe back to life.
Downloaded Server App again (for kicks).
2nd attempt at running Server App renders a Hang again at "Upgrading services".
Was I being silly thinking I'd have a flawless Upgrade and get home in time for Turkey ?
Does anybody have any ideas what could be happening ?
Thanks, and have a Happy Thansgiving !!
Jay Luke
(914) 906-1140 cell text
[email protected]

You were probably foolish to try this before a holiday weekend. Repeat after me...
Q: What is the first rule of upgrading OS X Server on a Production Server?
A: You don't upgrade OS X Server on a Production Server.
Q: What is the second rule of upgrading OS X Server on a Production Server?
A: You DO NOT upgrade OS X Server on a Production Server without a backup!
You get the point. Hopefully, this made you smile a bit. I feel your pain.
So, first... Tell me you have a backup of the 10.6.8 boot volume before your started and that you can restore, walk away slowly, and pretend this never happened.
If this is not the case, the next step is to define a list of all services that you had running on the server before attempting the upgrade. Remember, there are a lot of services removed between 10.6 and 10.9 (Podcast, MySQL, Tomcat, QTSS, etc). If you were using one of those services, the upgrade process may be halting. Likewise, if you are using something like mail, there may be a long reindexing process. So, while the 1 to 1.5 hours sounds very long, it is possible that the server was doing something. That leads to the next place to look.
What was being reported in the log files. System log, Open Directory log, and even the all events log can be helpful in tracking down an error or long running process.
Likewise, what does Activity Viewer show during this upgrade. What process(es) is/are consuming CPU? Disk I/O? The assumption is that the server is trying to do something (hopefully).
You are going to need your put on your Sherlock Holmes' deerstalker for this one. I will also point out that the "out of disk space" error is sounding particularly terrifying.
You may be having a very long Friday.
R-
Apple Consultants Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available in the iBooks Store

Step to Upgrade service plug-ins the ST-PI and ST-A/PI Plug-Ins

Dear all,
I have to upgrade service plug-ins the ST-PI and ST-A/PI Plug-Ins the current release.
Plug-In     Release
ST-A/PI     01J_ECC500
ST-PI     2005_1_640
After running the report RTCCTOOL the following details are
No.   Missing addon/ transport / note
   Description                 Implementation
1. [Note 69455 ]     Addon ST-A/PI 01L_ECC500
     Description     "Servicetools for Applications Plug-In" for ERP 2004 / ECC 5.00
2. [Note 539977 ]    Addon ST-PI 2008_1_640
     Description     "Solution tools plugin" ST-PI 2008_1_640 Addon for 6.40 / Netweaver 04
                             [Basis tools for services]
3. Note 207223
    Description     Setup of the EarlyWatch Alert service
Please suggest the step by step how to the implemented service and caution to before applying.
Regards,

Hai,
Please download the plug ins and upload them into the /usr/sap/trans/EPS/in.
You can do it from frontend through SAINT tcode, this will automatically uncar the files and place it in the
/usr/sap/trans/EPS/in directory.
Then you have to apply the plugins from SAINT.
http://www.sappoint.com/PHPWebUI/Documents/Applying%20Support%20Pack%20and%20Plug-ins.pdf
You have to do this from 000 client and user with enough authorizations.
http://www.saptechies.com/how-to-implement-support-packagesaddonsplugins/
Regards,
Yoganand.V

How can I disable "download error" dialog box when saving a complete web page?

Sometimes, when I try to save a web page as type: "Web Page, complete", firefox displays download error dialog box stating a file "could not be saved, because the source file could not be read."
I don't have a problem with firefox couldn't save that file, but I have a problem with firefox displaying that dialog box, because I have to click OK everytime.
Is there a way to disable that annoying dialog box?

I modified the host file mainly to block ads. But that's not the problem. It's OK for me for firefox to not saving some parts of a page (ads usually within a frame). It's my intention to NOT saving those files. I just want to save the main content of a webpage.
But I'm having a problem with firefox displaying the dialog boxes.

Can i transfer service from one iphone to another

can i tranfer service from one iphone to another

Yes. Your carrier could care less what phone you use, only that you pay your bill on time. Call them & make sure they have the correct IMEI number on your account.

Upgraded service disabled one of my boxes

Similar Messages

Maybe you are looking for