Upgraded tangerine cant get it to work. can anyone help?
Hello all Im new to this forum.
I have a clamshell that I upgraded with a new hard drive (80GB/4700rpm),a DVD/CD-RW drive,a new track pad, and a new keyboard. Before the change the only thing wrong with it was a bad CD-ROM. The OS-X does load up but just as the language screen the pointer and button wont work. Is there any thing I forgot to do or didnt do. All help will be appreciated.
Hello and Welcome to Apple Discussions.
Sounds like you didn't reconnect the trackpad connector when you put the casing back together. What happens if you connect an external mouse?
mrtotes
Similar Messages
-
Can anyone help
someone probably could help, but they would need at least SOME information about the problem you're having setting up that account on your phone.
Would YOU be able to help someone if you were given no information? -
I have tried several different means of getting a controlling signal out of gl_flicker_vi. What I want is to pull the current iteration value out of the inner while loop, compare that to another value and if true, trigger the case structure that contains the Take measurements sub vi. I can get an indicator on the main vi to register the iteration values from the sub vi, but I can't use them to control the case structure. When I connected a reference to the control and then a property node within the sub vi, I alway end up with broken wires. Is there anything that I can do to
get values out of the sub vi that I can use for my purpose? Is there something that I don't know about using references and property nodes that I should at this point? Any help would be greatly appreciated.
Attachments:
GL_Flicker_mod.vi 88 KB
Take_Measurements.vi 147 KB
Pass_a_Reference.vi 69 KB1-Apparently, you didn't wire an input for your DigNum Refnum, the ref to the inner loop index. That's where your broken wire should connect.
2- Better now : you could create a global variable of the loop index, that you can read anywhere in LabVIEW.
3- Anyway, your vi will not behave the way you want, since your comparison node will be operated by LabVIEW before anything comming back from GL-Flicker. Use a loop there ?
I think that you are a overusing propertie nodes, and I believe that there is probably a better and simpler way of doing what you want here...
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left... -
i have tried to resart it and still no luck please help its no good like it is thanks
You'll need to connect the device to iTunes and restore it. If iTunes doesn't recognize the iPod still, try manually placing it in recovery mode first and then performing the restore in iTunes. See this article for instructions on putting the iPod into recovery mode.
iOS: Unable to update or restore
B-rock -
I have signed up for adobe conversion to microsoft word and i can't get it to work - can you help me
I have signed up for adobe conversion to microsoft word and I can not get it to work - can you help me?
Hi Mike,
I've checked your account. I see that you just purchased the subscription this morning. The order is still pending processing, which is why you haven't yet been able to log in an use your subscription. It can take 24-48 hours for a subscription to process fully. Once it does, you'll be able to log in and convert files.
I apologize for the inconvenience.
Best,
Sara -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)". I have installed the latest version of iTunes but still get this message. Can anyone help?
Hello mustangcim243,
iTunes has various components bundled with it that it requires for general usage. I advise that we completely remove iTunes and all of these related components, verify that they have been removed, then reinstall. To do so, please follow the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Note: it is important to remove the 7 components in order. Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
If the above does not resolve your issue, I recommend we reset the SC Info folder:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
(See Step 4: Remove the SC Info folder)
Thanks,
Matt M. -
I have a new iphone 5 and although I had a little trouble downloading all my apps and music, I did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can Anyone help?
Hey leafxxx,
Thanks for the question, and welcome to Apple Support Communities.
The following resource provides troubleshooting steps if your iPhone is not displayed in iTunes when connected:
Apple - Support - iPhone - iTunes Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/itunes/
For more detailed instructions, see this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Enjoy your new iPhone 5!
Matt M. -
I have forgot my Ipad password and can't get it to unlock,can anyone help me????
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I am using a Macbook Air. Whenever I try to intall Acrobat X Pro, I get 'Instalation Fail'. Can anyone help me?
Hey,
Please ensure that you are logged in as administrator and anti-virus is disabled while installing Acrobat.
Let me know the link from where you are trying to download Acrobat.
Please try downloading from a different browser and check.
Regards,
Anubha -
I was trying to update operating system of my iphone but it gives the following error(We're sorry, we are unable to continue with your activation at this time) Now my phone is not work working can anyone help?
Is your iphone hacked/jailbroken?
-
I am trying to transfer my contacts from my iPhone 4S to my new iPhone 5S. I tried backing up the 4S in iTunes but kept getting an error. Can anyone help?
if you sync with outlook or another contact/mail/appointment app
and your friend also use that setup your friend will get all your stuff and your new phone will
get a merge of your stuff and all his stuff
better option is to use iCloud -
Hi i was living in australia for a while and bought some stuff with the australian itunes. Now i'm back in the uk i cant re-download them. Can anyone help?
Welcome to the Apple Community.
Click on your account name in the top right corner of the iTunes store in the iTunes application on your computer, enter your password and click the "view account" button. Navigate to the Apple ID summary where you have the option to "change country or region".
In order to change your location, you will need a credit card registered to an address in the location you are trying to change to.
You cannot change your location if you have credit on your account, if you are unable to spend your credit and leave a balance of zero, contact Apple, which you can do through iTunes Store Support. -
I keep getting "The connection to the server has failed" when I call up my mail although I do get internet connection. Can anyone help please.
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
When I try to drag titles or special effect into my clip in imovie it doesn't work can anyone help me?
Assuming you have (1) signed out, then (2) waited 30 minutes and it didn't work you will need to contact iTunes again.
Maybe you are looking for
-
Error while connecting to MDM server from Webdynpro
Hi , I am trying to connect to MDM server (5.5 SP04 no patches) through a webdynpro application . The following is the piece of code that I am using as a test . CatalogData CatalogData = new CatalogData(); int resultLogin = 0; try {
-
AppDomain was unloaded - out of memory happened
Hi, Please help me to resolve this SQL server error - Im getting below error occasionally and sometimes it gets resolved by itself. Error: AppDomain mydatabase.public[runtime].44 was unloaded by escalation policy to ensure the consistency of your app
-
how can i share my library with another user on my machine??
-
Can I share between my Maverick Macbook and my iPhone 5 using AirDrop
Can I share between my Maverick Macbook Pro and my iPhone 5 using AirDrop
-
MSS Reporting - Could not set up connection to ITS
Hello, I'm trying to activate MSS Reporting and have followed the configuration steps in ESS / MSS Configuration (SAP Best Practices for SAP HCM V2.600) (N06). After this I don't get any MDT related reports in the launchpad. When executing test progr