Upgraded the 4402 controller to version 6, gui doesn't work
I upgraded the 4402 to version 6 by upgrading to 4.1.192 mesh and then to 6. I could see 4.1.192 but after upgrading I could not get into the gui. I could telnet in but that was pretty brutal. What did I do wrong?
thanks
Gary
Actually when 6 installs it blows away the config. I had to come in and hook up the console cable. I usually hook one up to a laptop so I can always get to the controller but I didn't this time. I thought it was something I did but this controller proceeded to upgrade a controller in another building 20 miles away. The users complained they couldn't log in. When I got there and hooked up the console cable and rebooted version 6 got installed on there and the config was blown away. I had to tell it to boot from the secondary because I have some 1000 series APs still there. I had to recreate it and now everything is fine.
Gary
Similar Messages
-
Almost a year ago we upgraded our 4402 Controller to 7.0.98.0 to support our 1262 APs. This allowed them to be in our network. We recently realized that we are unable to access the 1130 APs directly from the WLC. We can still access them from the controller GUI, but not the WLC gui. If we downgrade to the 6.0.202.0, it fixes the issue with the 1130's, but we can longer have the 1262's on our network. The error we get when we try to connect to 1130's while on 7.0.98.0 or 7.0.220.0 is as follows:
7.0.98.0 error
Error: Object "LradMeshNode" does not exist
7.0.220.0 error
Error: Object "Child of Lrad#302675 (Lrad00:15:c7:2a:20:c0) class LradMeshNode" does not exist.
Any suggestions?
thanks,
Stevedo you mean you can't see the 1131 on wcs ?
If so, is your wcs on the same code rev as your wlc or a head ? Wcs should always be at or a head in code than your wlc ..
Sent from Cisco Technical Support iPhone App -
Hi All,
Can any one please let me know the process to upgrade the Essbase Client from Version 11.1.2.1 to 11.1.2.2 on LINUX 64 BIT Server. Is it possible to upgrade the essbase client alone or do we need to upgrade the Essbase Server as a whole? Also, does Essbase upgrade is possible from 11.1.2.1 to 11.1.2.2 on LINUX ?
If Essbase client upgrade is not possible, can you please tell the list of Files that need to be download to Install Essbase server V 11.1.2.2 on LINUX.
Thanks
ReddyHave a read of the following doc in Oracle Support - "How to Install the Essbase Client Tools MaxL and ESSCMD on a Planning Server Installed on Unix Server [ID 1477705.1]"
I know the title of the doc is not exactly the same as the question but it gives you an idea of the process based on 11.1.2.2, the easiest solution is probably to apply the maintenance release to upgrade from 11.1.2.1 to 11.1.2.2
Cheers
John
http://john-goodwin.blogspot.com/ -
i am running ios 7.1 on my iphone 5s but when i connect to itunes it tells me i need to upgrade the phone to itunes version 11.11 can anyone advise
You need to upgrade the version of iTunes on the syncing computer, not the version on the iPhone.
-
After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
Can anyone recommend a solution?If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
My Acrobat version is 11.0.10
I am running Windows 7 Professional with Service Pack 1
My Internet Explorer is Version 11.0.9600.17691
Update Versions 11.0.17 (KB3032359)
I am running Microsoft Office 2013 -
I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!
You did turned in Settings > General > Usage > Battery Percentage: ON?
Try a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data -
I've network in my company and installing internal web proxy that allow clients to connect to the internet (ISA 2004). i'm using the Firefox as default browser in my network. so what i need that no one in my network clients can't change the proxy settings or it just be dimmed. i did it in the previous version but when i try the steps in version 4 it doesn't work so I'm asking for solution for that.
many thanks for help,
Ahmed KhairyLeliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!! Can someone help please?
Hello I found my answer on Settings>>Restritions! :)
Thanks to me:) -
''locking as a duplicate of this thread - https://support.mozilla.com/en-US/questions/827625''
I've network in my company and installing internal web proxy that allow clients to connect to the internet (ISA 2004). I'm using the Firefox as default browser in my network. so what i need that no one in my network clients can't change the proxy settings or it just be dimmed. i did it in the previous version but when i try the steps in version 4 it doesn't work so I'm asking for solution for that.
many thanks for help,
Ahmed KhairyLeliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
In Safari, the link to "mail this web page" doesn't work, and the share link shows "no service". Does anyone have a solution? I have a MacBook Pro and upgraded to Yosemite yesterday.
See here: If sharing options and Markup are missing after you install OS X Yosemite
This resolved the issue for me.
Rick -
After upgrading from ITunes6 on ITunes 7 my videos doesn´t work
after upgrading from ITunes6 on ITunes 7 my videos doesn´t work. there are no error messages, popups or ballons. songs are no problem, only the videos?!
Can somebody help me?
Thanks
Crosshmmmm. let's try checking to see if they will still play in your current version of QuickTime.
in itunes, right-click on one of the videos that is causing the grief, and select "Show in Windows Explorer".
right click the icon of the file in the Explorer window that comes up and select "Open With ...", and try to open it with your QuickTime player. does it play there or do you get funny business with that too? -
What is the official Apple error number if the airport hardware on a macbook air doesn't work?
What is the official Apple erro number if the airport hardware on a MacBook Air doesn't work?
Welcome to the Discussions
Actually that is not enough information.
Was this to an AIM on PC Buddy ?
If so which version were they using ?
Was it to a Tiger Buddy on iChat ?
The log says it was one on the other and not a Leopard Buddy as there SIP port is listed as port 5061.
Also what routing devices are you using ?
Makes Models and version numbers please.
Which ports do you have open ?
What method did you use ?
In fact read this FAQ even though it was written at the time Tiger came out
http://discussions.apple.com/thread.jspa?messageID=2565168�
Other info to Start http://discussions.apple.com/ann.jspa?annID=100
10:48 PM Friday; June 27, 2008 -
Hi, i have my iMac from 2008 and it's always work but for almost the lasy year youtube doesn't work. That's wasn't a problem but. right by now, everytime i tried to watch a video the mac start to freeze and i must close all the application which are working and, sometimes, i need to shut down the entire sistem. I tried to reset safari, delete chache and cookies, whatever...but nothing. What can i do?
P.S. Even the flash games, like facebook's games doesn't work...they are slow and sometimes they freeze all. Sorry for my englishPick and download the latest Flash Player for your OS.
-
The middle button on my iphone 4 doesn't work properly what can I do about it?
the middle button on my iphone 4 doesn't work properly what can I do about it?
Make an appointment with the genius and bring to the Apple Store.
-
I signed up for a free trial. I want to convert a Word document to a PDF document. I've signed in and been through the process a dozen times. It doesn't work.
Hi kemtnilion,
What did you get a trial of? Adobe doesn't offer free trials of the Acrobat.com online services; did you get a free trial of Acrobat, perhaps? If so, you can save a PDF directly to Word from Acrobat, by choosing File > Save as Other > Microsoft Word > Word Document.
Please let us know if you have additional questions.
Best,
Sara
Maybe you are looking for
-
Filtering of values from a specific field
Hi Everybody We have a requirement where a column called "Role" will have a both numberic and character values in it. Ex: 01 , 02 , .99 , .98 , 101 , PRM , PRS , EOS , PMS etc. Now the user doesnt want any of these numeric values to appear in prompts
-
How to watch iTunes rental movie on HDTV and keep MBP display off
I would like to watch a movie on my flat screen TV. I rented the movie from the iTunes movie store, and I am attaching my MBP to the TV via the HDMI port on the TV and the sound cable to the RCA jacks. My understanding is that I have to use the F7 ke
-
Row cannot be located for updating. Some values may have been changed...
Hello, I have a legacy application written in VB6 and using Oracle OLEDB Provider (version 9 and updated to the last ones from oracle site) I've a problem during insert of a record using recordset method (AddNew). The returned message is "Row cannot
-
Error occurred in derivation rule in SAP
Hi All i am trying to post the document as well to create the new PR i am getting the below error messge as 'Error occurred in derivation rule. See long text Message no. K/101 Diagnosis : Fund From Commitment Item No entry in a derivation rule was fo
-
Processor speed after Standby Mode
I have the T400 with Windows XP (32bit). Dual P8600 2.4GHz processors & 3GB memory. Fairly new computer so there is plenty of space. I run a macro out of Excel every day. When I run the program it takes about 15 to 20 mins and Excel struggles to