Upgraded the firmaware for SPA-3000 and lost the dial tone

Please help me figure out the problem with my Sipura box which has lost the dial tone after I upgraded the firmware. All the configuration looks fine. it is registering fine too but no dial tone.

Reset the device to factory default. This is usually needed after upgrading the firmware.

Similar Messages

In the middle of downloading an update for garage band and lost the connection, now the app won't open or finish the download. Can I reinstall the app without losing my music?

In the middle of downloading an update for garage band and lost the connection, now the app won't open or finish the download. Can I reinstall the app without losing my music?

The obvious way to resolve this on a computer would be to uninstall the app, then reinstall it, however on an iOS device that would cause all the data assoicated with the app to be thrown away.
Make sure your iTunes library has the latest updates for all your apps, then backup and restore the device. This should pull back a fresh copy of the app from your iTunes library and then give it the data from your device backup.
tt2

How can i find the tablename for that field and suggest the report logic

Hi experts
The concept of BOM for finished components are defined in terms of semi finished goods. Hence, routing of a component from raw materials can not be seen directly in system through standard report.
But users need to have the details of a routing of a component from raw material in one report. To provide the details in single report, development is required.
With this report users can see the routing from raw material till component in one single report.
Assumption
BOM is maintained for a component with all related semi finished components till raw material properly.
Material Number: MARA MATNR   - Multiple selection option should be there (Mandatory)
Plant: AFRU WERKS      - Single selection parameter (Mandatory)
If procurement type is E or X, system has to check the routing through CA03.
If procurement type if F, leave this field as blank
1.operator
2.material
3.material description
4.workcenter
5.vendor
6.operation description
7.uom
8.qty
9.uom
10.setuptime
11.processingtime
12.deliverytime
using cs12,cs13
here i have seen the details of finished goods components like semifinished goods,rawmaterils,i tried se11 to find the the table for relevent field,
i cant get, if possible to suggest me the logic and how to find the relevent table for
that field
Regards
ds

for exploding the bom if you know header material use
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      CAPID                 = 'PP01'
      DATUV                 = SY-DATUM
      MEHRS                 = 'X'
      MTNRV                 = P_MATNR
      WERKS                 = P_WERKS
    TABLES
      STB                   = I_BOM
    EXCEPTIONS
      ALT_NOT_FOUND         = 1
      CALL_INVALID          = 2
      MATERIAL_NOT_FOUND    = 3
      MISSING_AUTHORIZATION = 4
      NO_BOM_FOUND          = 5
      NO_PLANT_DATA         = 6
      NO_SUITABLE_BOM_FOUND = 7
      CONVERSION_ERROR      = 8
      OTHERS                = 9.
now check PLPO & PLKO table for routing or AFVC and AFVV for routing.
if production order created you have to check in afvc and afvv else check in plpo and plko.
for checking with plpo and plko you have to check MAPL table.
for bom and material link
MAST,STPO,STKO.
stlnr is the common field
regards
shiba dutta

How to unlock the request for a report and add the same query to new reques

hi,
how to unlock the request for a and add the same query to new reques

You can unlock in SE03 tcode.
Goto tcode SE01, give the transport number --> display --> double click on the transport --> in the next screen select all the elements --> delete --> save.
To attach it to another transport, In RSA1, click on transport connection> Choose Object types> query elements --> here you can find your query/ or you can search, which you can drag to right and attach to the transport (using truck button).

I just downloaded the update for Firefox 4 and all the fonts are wierd - unreadable.

The fonts are strange and there are weird symbols making it hard to read.

Do you have an orange Firefox button in the upper left, or do you have the customary menu bar (File, Edit, View, etc.)?
Either way, you can check your current Firefox version using Help > About Firefox.
To switch from having a menu bar to having the orange button, right-click in a blank area after Help and uncheck Menu Bar. Then, to display the menu bar temporarily, you can tap the Alt key or press the F10 key.
Regarding the start page, there must be something just a little bit custom about the address. Otherwise, you would have been changed to '''about:home''' which is the new start page.

When i click on the store when my itunes is open, it opens the store for a minute and then the store goes blank. any ideas?

I am trying to access the itunes store. When i click on store in Itunes, the store opens for a minute then goes blank. Any ideas?

This is because the regular central Nightly channel builds is only the desktop version. The version on Nightly development channel is at 21.0a1 now actually.
You need a build that has Metro support.
http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/latest-elm/
Many users state they cannot get Metro version to work on 32-bit Windows anyways.
There is this running thread at mozillaZine about the Metro builds. http://forums.mozillazine.org/viewtopic.php?f=23&t=2304983

I have a iPhone 4 s I did the software update ages ago and lost my camera roll then did the update and they all came back then on Christmas eve they have all gone !!

THis is now the 5 th time I have written this !!!
I have a iPhone 4s i did the software update ages ago and lost the camera roll .....then I did the update and all my photos returned ...now on Christmas eve they all dissapeared
I now just albums .... All Photos but that only has 77 photos , and that's it over 1000 photos have just gone ??
PLease help me !!

Why should we care how many times you've written this? Are you making multiple threads? Are they being deleted by the Hosts?
Did you make a backup of your iPhone before you updated the iOS?
Did you import the photos to your computer?
Were the photos in the Camera Roll, Photo Stream or synced iTunes albums?

Can SAP run the depreciation for closed Period and posting to diff month?

My client forgot to run the depreciation for Jan 2011, and now the Jan period has been closed and report also done.
My solution was to re-open the Jan and does the depreciation, once completed reclassify Jan depreciation posting to Feb 2011 manually.
I am just wandering whether SAP can handle this different way.
Can SAP performs Jan (Closed Period) depreciation and post to Feb period automatically or any other suggestions?
Cheers

Hi
Yes, you can do that
Follow this thread... Unable to post depreciation- Error AA730
Using ABF1, you can do it
Br, Ajay M

I just upgraded to Firefox 5.0.1 and since the "lock" icon never appears when accessing secure websites, where should I look for it?

I just recently upgraded to Firefox 5.0.1 and now the "lock" icon doesn't appear anywhere (I can find) when accessing secure websites. I haven't seen it once. It used to appear in the lower right corner of the screen. I also have Norton Internet Security.

Padlock is no longer part of Firefox; it was removed beginning in Firefox 4. The padlock shows that there is a secure connection but does not supply additional information. You could have made a typographical error and still have been connected to a secure connection. The padlock was replaced in Firefox 3 with the Site Identity Button. Familiarize yourself with the Site Identity Button at the left end of the Location Bar:
*https://www.mozilla.com/en-US/firefox/security/identity/
*https://support.mozilla.com/en-US/kb/Site+Identity+Button
*http://www.dria.org/wordpress/archives/2008/05/06/635/
You can install this add-on if you wish: *https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns but I can cut and paste them so I know they are still there. Has this happened to others

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet. I have charts and other stuff related the the original table so I need to figure out why I can only see from column C forward. I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?

I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

I would like to make an upgrade from creative suite cs5 to cs6 what is the price for student edition and what i have to do, i do not found in your website price

i would like to make an upgrade from creative suite cs5 to cs6 what is the price for student edition and what i have to do, i do not found in your website price

There are no upgrades for student editions. You simply buy a fresh license at the discounted price.
Mylenium

Upgraded to 4 and lost the use of back/forward butons when in new tab. Re-installed 3.6 but problem still persists. Any answers ????

I upgraded to 4 and lost the use of the back/forward buttons when in a new tab (ok on homepage) Re-installed 3.6 but problem still persists. Any remedy ????

*New tab toolbar button: https://addons.mozilla.org/firefox/addon/new-tab-toolbar-button/

I cant upgrade my new ipad to the ios6 dont knkow why and whats the problem and i was alo trying to do the update simolteniously for infinity blade which i stoped in between as it crashed the ios upgrade once hence tryed it again it went half way but

i cant upgrade my new ipad to the ios6 dont knkow why and whats the problem and i was alo trying to
do the update simolteniously for infinity blade which i stoped in between as it crashed the ios upgrade
once hence tryed it again it went half way but it didnt work at all and i am trying to do it from the
India..

bnjr86 wrote: There have been times when I've walked in there, that I really don't want to deal with VZW anymore and just take my business elsewhere.
I wonder if another provider would really be much different? Read some of the other carrier forums - seems to be the same story everywhere.
I'm not disagreeing with you - I've found that I am usually more informed about Verizon policies and procedures than some of the reps in our local store.

I have an iPhone 4s in the UK with EE, I recently upgraded to iOS 8 and lost the ability to access cellular data.

I have an iPhone 4s in the UK with EE, I recently upgraded to iOS 8 and lost the ability to access cellular data.
I've upgraded to iOS 8.0.2 with no improvement.
I've reset network settings on both versions with no positive result.
I can't rollback to iOS 7 as apple has stopped signing the build.
I realise the 4s is fairly old tech but this experience has been quite time consuming and incredibly frustrating as I still haven't managed to resolve the issue. I had been holding back to upgrade to the new generation of iPhone but this experience and the negative press has made me seriously consider other options.

Here is what you can try,
Hold both the power and home buttons until the device powers off, may take 10sec. Let go of both as soon as screen goes black.
Open itunes on your computer and plug in your cable to the computer but NOT the phone.
Once itunes is open hold down the home button on phone and plug in cable and continue holding home button until you see the connect to iTunes logo on screen. iTunes will give a msg that a device has been detected in recovery mode. Now select restore and do not disconnect until you see your device in iTunes again.

Upgraded the firmaware for SPA-3000 and lost the dial tone

Similar Messages

Maybe you are looking for