Upgraded to 1.1.3 now

i upgraded to the new verison. and it works but evrey now and then i will see the activation screen "please plug into itunes". i have a never jailbroke hacked or anyhitng. and i noticed that when i frist turn on the activation screen comes up for a second then goes away. i tried a restore. it works as long as i turn it off and back on.

I have problems too after updating with 6.1.3. Everything was fine in my 4s until 6.1.3 update. Then the wifi and bluetooth stopped working. Apple has to fix this with a new update. There are hundreds of 4s holders with the same problem. This is unacceptable.

Similar Messages

  • Iphone 4 -- 4.2 upgrade....Text now making a noise when sent

    Good Morning,
    I upgraded over the night and now when i send a text it makes a noise every time it goes through.
    The text tones are off.
    IS there a way to fix this to not make a noise.

    This noise is driving me nuts, I never had it before this weeks update either. I use my phone for work so I need the ring tone sound on but don't want it swooshing everytime I send a text !
    For the first time since I got my iPhone I miss my Blackberry and its fully customisable tone settings !

  • I interrupted my iphone upgrade to ioS 6 and now my phone just keeps showing the apple. it wont restart or show up when I plug it into itunes!!!!

    Help! i accidently interrupted my iphone upgrade to ioS 6 and now my phone wont turn on completely. it just keeps showing the apple. it also wont register with itunes...i have tried turning it off and restarting it multiple times but nothing is working. HELP!

    hey man, i feel your pain... here's my story and i'm pretty sure this will work for you... on the 19th of september i went to upgrade ios 6 and paused it about 1/10 through... when i plugged my phone up at night the screen was at the normal lock screen.. when i woke up at 10:30 am i went to check my phone and the screen appeared as an apple logo with a progression bar about 6/10 full.. it didn't seem to be progressing any more, but i guess that was only because it was so slow trying to download over wifi because it had all night to finish downloading.. anyways i needed to check my texts and the time so i held down the lock button and the phone turned off during the download.. when i tried to turn it on the apple logo would appear like normal trying to boot up.. then it would fade away and cut off.. then seconds later try to turn on again, by itself, repeatedly for hours on september 20. i tried restarting it (holding lock and home button down 10-15 seconds) but the problem with that is that the phone was already trying to turn on itself so it never would restart correctly... (continued turning on and off by itself).. i went to verizon and they said my phone is screwed.. go to apple if you wanna pay.. i called apple support and a lady helped me out here's the solution that worked after hours of thinking my phone is totally screwed.. when the phone is dark and cut off.. press and hold the home button before you plugin your sync cable to your usb port.. (have itunes up and ready) continue holding the home button and plugin the sync cable.. still holding the button, wait for a message from itunes appear that says it recognizes your device in recovery mode.. press ok.. the screen on your iphone should be a snyc cable and and arrow pointing to an itunes symbol... from there it is pretty self explanatory.. you will need to restore and update your phone from there which should be an option after you press ok... it takes awhile.. your phone will then go through one, or maybe a few progression bars (it may vary, not sure).. while your itunes will be restoring software & firmware.. when everything is done on itunes and your phone.. your phone should boot right up!!! reply if you have any more questions.. i'm so glad i resolved my issue today.. good luck!

  • I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

  • I upgraded to iTunes 8 and now it wont open at all

    Ok so I upgraded to iTunes 8 and now every time I try to open my iTunes it says that iTunes has unexpectedly quit and it asks me if I want to relaunch it so I click relaunch and the same thing happens. iTunes is like my second life so can somebody pllleeeeaaaaassseeee help me!!

    I would first see if you can open iTunes in a test user. This will give us some direction in troubleshooting the issue.
    To create a test user:
    1. Open System Preferences from your Apple menu
    2. Click on the Accounts icon
    3. If you see a closed padlock in the lower left hand corner, click on it and enter your admin password to allow changes
    4. Then, click the + button
    5. Enter the information you are prompted for, and then click "Create Account"
    6. Restart the computer and log in to the new account
    Once logged in, see if you can open iTunes. If not, I'd recommend reinstalling iTunes:
    Go to your Applications folder
    Drag iTunes.app to the Trash
    Restart the Mac
    Empty the Trash
    Download & install from http://www.apple.com/itunes/download
    If you can open it in the test account, return to your original account and try removing your iTunes preferences file.
    Quit iTunes if it is running.
    Navigate to /User/Library/Preferences/
    Drag com.apple.itunes.plist to the trash
    Restart the Mac
    Launch iTunes again
    If it still isn't working, try recreating the library per these steps:
    http://support.apple.com/kb/HT1451
    CG

  • I upgraded for Firefox 4 and now my simplePass identity protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE.

    I upgraded for Firefox 4 and now my HP SimplePass Identity Protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE. It worked with the previous Firefox version but now when I use the internet, it doesn't even acknowledge I have the scanner. When I run my finger over it, it opens the settings panel but does not allow use of the already saved information or allow new information to be entered. I need this corrected. Any suggestions?

    I asked this same question, and just received a response:
    "Thank you for contacting DigitalPersona. There will be no update releases
    for DigitalPersona Personal in the future. There will be no updates for
    Firefox 4 nor Internet Explorer 9. IF they work they work, if they do
    not work with DPPersonal, then you will have to decide to either keep
    DPPersonal and forgo Firefox 4 or IE 9, or vice versa. DigitalPersona
    is leaving the consumer market and is focusing on business applications.
    In fact, DigitalPersona Personal will not longer be supported after
    Mid-April of this year.
    We apologize for any inconvenience this might cause. Sincerely, Tech Team "
    In other words, there will be NO update.

  • I upgraded to Mountain Lion and now I can't use any of my software!

    What a disaster and huge mistake.  Upgraded to Mountain Lion and now I can't run Autocad 2012 for Mac, any of my Adobe Creative suites software such as Photoshop, Illustrator.. and now I can't even do upgrades because Mountain Lion doesn't allow me to launch DMGs.  I've lost thousands of $'s in software, not to mention time, but most importantly now I can't even work!  I just tried to revert back to Snow Leopard by intalling it back in my hard drive and it won't let me.  I never used Time Machine.  Is there any way on earth I can revert back to my old operating software???  Please help.  And if you haven't upgraded yet and are thinking about it.  BEWARE - and don't do it.  I've been reading that Mountain Lion isn't working with Microsoft applications either.  Omy...I haven't even checked that. 
    and of course no one at Apple support can or will help me

    lunaulu wrote:
    It's not my Microsoft that I use much or am worried about.  I can't run AutoCAD.  and I can't update AutoCAD either.  When I try to mount an update just to get it working, it says it can't run the DMG file.  Apparantly this new platform doesn't use Rosetta - which is needed to run any of these updates or downloads.  ***?  and then When I try to open CS4 appliations - Adobe Photoshop, Illustrator, or InDesign - I get the message "Licensing for this product has stopped working - Error 150:30 - ***? 
    So basically I can't use ANY of the programs I ran before.  And yes I have googled desperately all day.  Adobe has some suggestions - like deleting a Flex files - which I did...Defragmenting - which I did.  And most importantly provides am Adobe Licensing Repair tool to fix - which I can't open because Mountain Lion won't mount the DMG in order to run it!  It's a complete disaster and I don't have the money or time to purchase and or reinstall everything.  I am just screwed. 
    No you are not, calm down, cbs20 already gave you the answer on opening dmg files, updates are available for most of your programs and I assume you have licenses for the Adobe products. AutoCad you'll have to wait for.
    And please .... Start Backing Things Up, you could lose it all without one, work included.

  • Hi All.. i want to use my iphone 4 to play poker on facebook with the zynga..  idont know the apps name,, thank's for ur help, and how to upgrade ios 4.3.3, now i'm still using ios 4.1.1, thank's

    hi All.. i want to use my iphone 4 to play poker on facebook with the zynga..  idont know the apps name,, thank's for ur help, and how to upgrade ios 4.3.3, now i'm still using ios 4.1.1, thank's

    when you connect your phone with your computer and use itunes you can click on the phone
    and click on an update button
    about facebook games then think they are all flash based and iphones cant do flash so thats not possible

  • I upgraded to IOS 7 and now I can't get my Hotmail account on my phone.  When I type in all the information, I get "Unable to Verify Account Information".  How do I get to use my Hotmail account using this software????

    I upgraded to IOS 7 and now I can't get my Hotmail account on my phone.  When I type in all the information, I get "Unable to Verify Account Information".  How do I get to use my Hotmail account using this software????

    I have had the same problem as yours on my Ipad after upgraded Procreate 2.01. My iOS is 7.04. I tried to find solution from internet for weeks. Fortunately, the problem was resolved a few minutes ago. It is very simple,
    1. Lunch outlook.com to confirm you can access hotmail mailbox. It means your account is Ok.
    2. Go to setting>Mail,Contacts,Calendars.Delete your hotmail account from your device.(my device is Ipad)
    3. Turn off your device, then turn on again.
    4. Go to setting>Mail,Contacts,Calendars and create your hotmail account by tap outlook.com. Be sure the incoming mail server is pop3.live.com.
    5. Waiting for validation.
    That's all. Hope my experience is helpful. Good luck!
    Nelson

  • Can I sync my iCloud calendar with Outlook 365?  I upgraded from Office 2010 and now it doesn't sync.

    I upgraded from Outlook 2010, and now it doesn't update in Outlook 365.  Thinking I can't do it, and it's a pity, cause I want it all to integrate on phone and on desktop.  I'm running Windows 7 and Office 365.  The iCloud app works fine with Internet Explorer, but I can't get the calendar to update.  Any suggestions?

    Can't I just set up Exchange as one of my calendars in ical?
    Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
    Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
    No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
    What is the best work around for this?
    None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
    I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great.

  • HT2513 I have just upgraded to the icloud and now I am getting an error message on ical - saying "make sure the URL is correct", I haven't changed anything so why is it now an issue? any ideas?

    I have just upgraded to the icloud and now I am getting an error message on ical - saying "make sure the URL is correct", I haven't changed anything so why is it now an issue? any ideas? 
    The full message sasy "The calendar https:// cal.me.com:8443/principas/users/(server number) was not found on the server.  Make sure the URL is correct.

    10.6.8 cannot access iCloud's facilities - you can set Mail up manually and there is a hack which some people have used to sync calendars (see below) - you cannot sync any other type of data.
    This is the situation with iCloud and Snow Leopard:
    Your email, calendars, and 'Find my iPhone' will be migrated to iCloud. Contacts and Bookmarks cannot be migrated from a Snow Leopard Mac.
    Your iDisk, together with website hosting and Gallery, will continue to work as before until next June.
    Syncing of Dashboard Widgets, Dock Items and Keychains between Macs, and Mail Accounts, Mail Rules, System Preferences, Signatures & Smart Mailboxes between Macs & iOS devices, will cease altogether.
    You will be able to access email and calendars on the iCloud website at http://icloud.com provided your browser is reasonably up-to-date.
    You will not be able to sync contacts or bookmarks from a pre-Lion Mac.
    You will be able to enter the server settings for email manually in the Mail application and access your email.
    You will not be able to sync your calendars directly.
    Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point.  BusyCal is an iCal-like calendar application with extra facilities: it can sync with the iCloud Calendar while running on Leopard, Snow Leopard or Lion.
    There appears to be no method of syncing contacts (though Address Book on a Mac can be synced with Google or Yahoo address books - I don't know how reliable this is).

  • Upgraded to iTunes 11. Now, I can not sync my music to my iPhone 4S (iOS 6.0.1) Apps, movies and videos sync OK. Music is the problem. Tags are correctly check-marked. Any ideas ???

    Upgraded to iTunes 11. Now, I can not sync my music to my iPhone 4S (iOS 6.0.1).  Apps, movies and videos sync OK. Music is the problem. Tags are correctly check-marked. NO ERROR MESSAGE THOUGH. Just a No Content in the Music App in the iPhone. Any ideas ???

    Bump!

  • My ipad has upgraded to IO6, but is now no longer recognised on my mac (10.5.8) or my itunes (10.6.1). What can I do? Can I revert ipad back?

    My ipad has upgraded to IO6, but is now no longer recognised on my mac (10.5.8) or my itunes (10.6.1). What can I do? Can I revert ipad back?

    You can't downgrade the iOS on the iPad.
    Quit iTunes, reboot the Mac and reboot the iPad and then try again.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Once I upgraded to ML, I'm now finding that my Seagate Free Agent external hard drive is no longer being backed up by Time machine.  Do I have to wait for Seagate to update their drivers for this hard drive?

    Once I upgraded to ML, I'm now finding that my Seagate Free Agent external hard drive is no longer being backed up by Time machine.  Do I have to wait for Seagate to update their drivers for this hard drive?

    I tried your suggestion, and it's been giving me the message "Preparing for Backup" for the past 8 hours.  Does this mean TM is backing up my hard drive?  I'll give it a few more hours, but if nothing else happens, I'm not sure what else to do.  I'm not sure if there are any new external hard drives that are compatible with ML yet. 

  • HT1923 I am using windows 7 and have upgraded itunes to 11. Now when I open my music library in itunes and click on a song it says "original file could not be found" Over 2000 songs come up this way and locate does not seem to work. Before the upgrade all

    With Windows 7 I upgraded itunes to 11. Now in my itunes library, when I click on a song "original file could not be found" comes up. This happens with over 2000 songs, but it seems to be ones I recorded from cd's. Locate does not seem to work. Has anyone else had this problem?

    Highlight a song that is supposedly missing, press CTRL+I to Get Info, say no when asked to locate the file, then look at the summary tab. Where does iTunes "think" the file should be? Where is it really? You may need to give a configuration file a minor tweak.
    tt2

  • I have an iphone 4 that I recently upgraded to IOS 7, and now I cant drag music to it.  It says "preparing to update" eternally.  Weird thing is... I have an iphone 3s that is IOS 6, and it takes new music all day.  arg.

    I have an iphone 4 that I recently upgraded to IOS 7, and now I cant drag music to it.  It says "preparing to update" eternally.  Weird thing is... I have an iphone 3s that is IOS 6, and it takes new music all day.  arg.
    I have tried direct connecting the iphone 4, via wifi, everything.  I hate itunes with a passion, but it seems to be a necessary evil.  I dont know why I would have no trouble with my iphone 3.  I am using the same technique for both phones.  Find the music I want in the library and drag it to the iphone.  Works on IOS 6, not IOS 7.
    WHat else should I try?

    Hi jeffmbellucci,
    If you are having issues dragging music to your iPhone 4 after a recent upgrade to iOS 7, you may want to verify that the phone is still set to "Manually manage music and videos." You may find the following article helpful:
    Apple Support: Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/ht1535
    Regards,
    - Brenden

Maybe you are looking for

  • Windows Vista "Disk is locked" Error

    ITunes reports "The folder iTunes is on a locked disk" or "You do not have write permissions for this folder" in Windows Vista. I know that there is a suggested fix for XP using TweakUI, but I can't find anything to help in Vista. I've tried removing

  • When i reply to a group text it only shows one recipient and says "failed to send"

    I receive a text from a group thread I've been in for ears, when I open the text and respond, it only shows one of the members in the "to" line and then wont let me send any messages. any ideas? Also, if I'm typing a text and I get another text the w

  • Error-Itunes has detected an ipod that appears to be corrupted

    When I connect the ipod to the computer it says "Itunes has detected an ipod that appears to be corrupted. You may need to restore the ipod before it can be used with itunes. You may also try disconnecting and reconnecting again." I disconnected and

  • Default material populated in Transaction of IC Webclient 4.0

    Hi Experts, Might sound silly but I dont have any answer for the following requirement. Requirement is to have a material/product defaulted in the Order type of IC Webclient. I mean, as soon as the IC agent create a transaction, the order type should

  • Rfebbu00 not clearing the invoice

    Hi All, I am developing a program to clear the invoice specified in lockbox file if check amount matches with the invoice amount. Also if invoice company code is different from lockbox company code, I need to clear that invoice against the invoice co