Upgraded to 1.8.2 now crashes at Info

I can open the info window to a song just fine. But anymore than just one and it will cause iTunes to crash to a force quit.
Can some one help me?

Thanks for your reply. Any suggestions for ways to fix this? If I've already updated using my phone, am I just screwed?

Similar Messages

IPhone 3gs upgrades to ios 5 and now crashed

I have spent the whole day upgrading the families iphones, ipods and ipad. The 32gb iphone 3gs has now crashed and is stuck in a loop of shwoing the Apple logo, then goes into the connect to itunes screen adn then back ot the apple logo. It will not power off, will not hard or soft reset and will not go into recovery mode.
I have trried all resets by being both connected to itunes and not. I have installed all latest itunes. I am using windows 7. I have also tried on another computer using viats, but no difference.
What now?

If your iPhone is in recovery mode, your data is already gone.
If you have been regularly syncing with your computer or backing
up over iCloud, you can restore from there. Otherwise, your contacts
should be in whatever program you use on your computer - for
example, Outlook for Windows and Contacts for OS X. Any photos
not previously backed up to computer or iCloud are gone.

Itunes 8.2.0.23 upgraded now crashes before opening

As per title, after installing the new ITunes to upgrade my iphone firmware it repeatedly crashes when opening.
The error in the event log is:
Faulting application itunes.exe, version 8.2.0.23, faulting module itunes.exe, version 8.2.0.23, fault address 0x00eb0916.
I've tried reinstalling. Please help, I neeeeeedddd the new iphone firmware!!

I had this same problem this morning and I was literally in tears!!!
I clicked 'file' and 'add folder to library' and selected the 'my music' folder - it restored everything including apps, recent downloads from tesco and amazon and CDs that I have recently added but not yet backed up.. I am now really wary though!!

I recently installed Mavericks on this iMac and upgraded to Adobe Cloud 2014 now InDesign CC 2014 fails to launch and I get a crash report. Has this happened to anyone else?

I recently installed Mavericks on this iMac and upgraded to Adobe Cloud 2014 now InDesign CC 2014 fails to launch and I get a crash report. Has this happened to anyone else?

It isn't happening to everyone else, but if there was a trend of it happening to a lot of people, that would probably show up in the official InDesign user forum. But there aren't a lot of crash reports there, so it isn't something that's happening to everyone. There are a couple, so you might look at those. But since there is not a huge wave of crash reports, the problem might be more related to a problem on the system rather than a problem with InDesign, like a corrupted font.
The best place to troubleshoot is probably over at the Adobe forum since the users there know InDesign very well.

Firefox gets slower with every upgrade & now crashes every time I open a PDF, made worse when opening the next time, by reopening the PDF & crashing again

Firefox gets slower with every upgrade & now crashes every time I open a PDF, made worse when opening the next time, by reopening the PDF & crashing again

If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter

When iOS 7 came out it told me to upgrade my iPad 4. Now apps crash, internet crashes! I'm very upset

When iOS 7 came out it told me to upgrade my iPad 4. Now apps crash, internet crashes! I'm very upset I paid nearly a thousand $ for this!!!! How can it be fixed?
<Edited By Host>

Standard troubleshooting steps are reset, restore, restore as new. Have you tried the reset? Hold down the home button along with the power button until you see the Apple, then let go

Many of my Apps are now crashing after upgrading my iPad 1 to OS 5. What's up?

Many of my Apps are now crashing after upgrading my iPad 1 to OS 5. What's up?

Free memory. You are probably getting crashes becasue you have too much stuff floating sround in memory. Double tap the home button to see the task bar. Touch and hold any of those icons until they jiggle, then delete them all by touching the minus sign.
Do this every day, or more oftern if needed to keep the system freed up. If you are using safari a lot, make sure to fully close some of the windows by touch the x on the tabs. Each window uses some active memory.
From time to time, do a full reboot by holding the sleep and home button until the apple logo appears. Ignore the red slider. This also frees up some system resources.
The iOS system is supposed to do this for you, but since the intro of ios 5 there are a fair number of folks crashing.

Upgraded to ATV 2.3 - now iTunes crashes

Upgrade ATV to v2.3; now iTunes (8.0.2, Vista) crashes when synching with ATV.

Yes.
Remove Apple TV from iTunes' list of Apple TVs, and re-sync it. I didn't want to do this as re-syncing 60+ GB of data took an age to complete, but now it's working fine.
It was discussed on this Thread:
http://discussions.apple.com/thread.jspa?threadID=1805435
Make sure iTunes is up to date also, but I suspect that it only happens with the latest iTunes 8.0.2
Message was edited by: startledbunny

FCP 10.0.1 update now crashes every time I launch it!

FCP update now crashes every time I launch it! Won't even open a project I started last week with version 10.0.0.
I have a deadline at work so I've now got a big problem! I'm trying to give the new and supposedly improved FCPX a shot but this app is turning out to be a real hack. What other professional video editing software do you guys use? Anyone use Premier Pro? I have Premier pro and think I should probably start my new projects in it. As I said....this app is a real mess.
FYI: Same problem for my 1 year old MacBook Pro (8G ram, i7 processor) AND my Mac Pro (16G ram, 2 x 3GHz quad core processors, 4-1TB hardrives.

I don't know who these friends are, but they're certainly misinformed and they don't appear to be doing you any favours.
There are a great number of professional editors who have used Final Cut Pro since version 4 - but took the trouble to
a. Find out the system and install requirements for FCP X
b. Watch professional tutorials such as Ripple Training and actually LEARN how to use this ground breaking new application.
They (and I) are having very few issues with FCP X - especially since the update.
If you're getting crashes, autosave problems etc, there is more than likely some conflict on your system drive.
Create a new (admin) user on your Mac system and try FCP X from there.
I did this, and FCP X worked perfectly on the new account, meaning there was definitely a conflict on my existing system.
To be absolutely certain my MacPro's system was squeaky clean, I then did a clean reinstall (not TimeMachine) and FCP X has worked reliably ever since.
FCP X application should be in your Applications folder and ideally, your project and events should all be on an external HD and not on your Mac system drive.
I have around 4000 clips distributed between six events at the moment and FCP X is coping very well most of the time.
It helps to work without the waveforms displayed as these slow things down considerably.
Do you have FC Studio or a version of FCP on the same drive partition as FCP X?
This is what Apple say on their current web page on installation practice:
"It is strongly recommended that you install Final Cut Pro X, Motion 5, and Compressor 4 on a startup disk that does not have Final Cut Studio (2009) already installed. Use Apple's preferred installation procedure when upgrading one version of Final Cut Pro or Final Cut Studio to the next. This procedure is not unique to Final Cut Pro X."
They do go on to say "if you must" have the two on the same partition, FCS must be located in a different folder - but I would have thought the words "strongly recommended" and "if you must" speak for themselves.
Andy

Iphone 4 -- 4.2 upgrade....Text now making a noise when sent

Good Morning,
I upgraded over the night and now when i send a text it makes a noise every time it goes through.
The text tones are off.
IS there a way to fix this to not make a noise.

This noise is driving me nuts, I never had it before this weeks update either. I use my phone for work so I need the ring tone sound on but don't want it swooshing everytime I send a text !
For the first time since I got my iPhone I miss my Blackberry and its fully customisable tone settings !

I interrupted my iphone upgrade to ioS 6 and now my phone just keeps showing the apple. it wont restart or show up when I plug it into itunes!!!!

Help! i accidently interrupted my iphone upgrade to ioS 6 and now my phone wont turn on completely. it just keeps showing the apple. it also wont register with itunes...i have tried turning it off and restarting it multiple times but nothing is working. HELP!

hey man, i feel your pain... here's my story and i'm pretty sure this will work for you... on the 19th of september i went to upgrade ios 6 and paused it about 1/10 through... when i plugged my phone up at night the screen was at the normal lock screen.. when i woke up at 10:30 am i went to check my phone and the screen appeared as an apple logo with a progression bar about 6/10 full.. it didn't seem to be progressing any more, but i guess that was only because it was so slow trying to download over wifi because it had all night to finish downloading.. anyways i needed to check my texts and the time so i held down the lock button and the phone turned off during the download.. when i tried to turn it on the apple logo would appear like normal trying to boot up.. then it would fade away and cut off.. then seconds later try to turn on again, by itself, repeatedly for hours on september 20. i tried restarting it (holding lock and home button down 10-15 seconds) but the problem with that is that the phone was already trying to turn on itself so it never would restart correctly... (continued turning on and off by itself).. i went to verizon and they said my phone is screwed.. go to apple if you wanna pay.. i called apple support and a lady helped me out here's the solution that worked after hours of thinking my phone is totally screwed.. when the phone is dark and cut off.. press and hold the home button before you plugin your sync cable to your usb port.. (have itunes up and ready) continue holding the home button and plugin the sync cable.. still holding the button, wait for a message from itunes appear that says it recognizes your device in recovery mode.. press ok.. the screen on your iphone should be a snyc cable and and arrow pointing to an itunes symbol... from there it is pretty self explanatory.. you will need to restore and update your phone from there which should be an option after you press ok... it takes awhile.. your phone will then go through one, or maybe a few progression bars (it may vary, not sure).. while your itunes will be restoring software & firmware.. when everything is done on itunes and your phone.. your phone should boot right up!!! reply if you have any more questions.. i'm so glad i resolved my issue today.. good luck!

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I upgraded to iTunes 8 and now it wont open at all

Ok so I upgraded to iTunes 8 and now every time I try to open my iTunes it says that iTunes has unexpectedly quit and it asks me if I want to relaunch it so I click relaunch and the same thing happens. iTunes is like my second life so can somebody pllleeeeaaaaassseeee help me!!

I would first see if you can open iTunes in a test user. This will give us some direction in troubleshooting the issue.
To create a test user:
1. Open System Preferences from your Apple menu
2. Click on the Accounts icon
3. If you see a closed padlock in the lower left hand corner, click on it and enter your admin password to allow changes
4. Then, click the + button
5. Enter the information you are prompted for, and then click "Create Account"
6. Restart the computer and log in to the new account
Once logged in, see if you can open iTunes. If not, I'd recommend reinstalling iTunes:
Go to your Applications folder
Drag iTunes.app to the Trash
Restart the Mac
Empty the Trash
Download & install from http://www.apple.com/itunes/download
If you can open it in the test account, return to your original account and try removing your iTunes preferences file.
Quit iTunes if it is running.
Navigate to /User/Library/Preferences/
Drag com.apple.itunes.plist to the trash
Restart the Mac
Launch iTunes again
If it still isn't working, try recreating the library per these steps:
http://support.apple.com/kb/HT1451
CG

I upgraded for Firefox 4 and now my simplePass identity protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE.

I upgraded for Firefox 4 and now my HP SimplePass Identity Protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE. It worked with the previous Firefox version but now when I use the internet, it doesn't even acknowledge I have the scanner. When I run my finger over it, it opens the settings panel but does not allow use of the already saved information or allow new information to be entered. I need this corrected. Any suggestions?

I asked this same question, and just received a response:
"Thank you for contacting DigitalPersona. There will be no update releases
for DigitalPersona Personal in the future. There will be no updates for
Firefox 4 nor Internet Explorer 9. IF they work they work, if they do
not work with DPPersonal, then you will have to decide to either keep
DPPersonal and forgo Firefox 4 or IE 9, or vice versa. DigitalPersona
is leaving the consumer market and is focusing on business applications.
In fact, DigitalPersona Personal will not longer be supported after
Mid-April of this year.
We apologize for any inconvenience this might cause. Sincerely, Tech Team "
In other words, there will be NO update.

After upgrading to iOS 5 my music crash when i turn the iphone vertical to horizontal !!

after upgrading to iOS 5 my music crash when i turn the iphone vertical to horizontal !!

I am having this same issue.

Upgraded to 1.8.2 now crashes at Info

Similar Messages

Maybe you are looking for