Upgraded to 10.3, can't use Classic Program

I upgraded my imac G3 to 10.3. I have some software that runs only OS 9. I copied an OS 9 System Folder into my Utilities . Then went to System Preferences to get it to se the System 9. It doesn't see it. I tried to reboot. That didn't help. Any ideas.

Hi jeffflp4888,
copying the OS 9 system folder is o.k. However, as was mentioned before, it has to reside on the root level of the hard disk. Furthermore you might have to "bless" it: Open the system folder, drag the file called "Finder" to the desktop, close the system folder and drag the Finder back to it. Now try again with the preference pane.
If this answered your question please consider granting some stars: Why reward points?

Similar Messages

Upgrade IOS 7.1 -- Can't use / open 3G / Data

When I upgrade IOS7.1 -- I can't use / open Data / 3G??
WHY????

Try here:
Find your AppleId: http://support.apple.com/kb/HT5625?viewlocale=en_US&locale=en_US
You can get your appleID password reset at iforgot.apple.com,

Upgrading Crystal 9 to Crystal XI using Classic ASP

I am trying to find information on how to upgrade crystal 9 to crystal xi using classic asp code. Not having much luck, any help would be appreciated.
Thanks

Hi Amy,
This forum is dedicated to topics related to the creation and design of Crystal Report documents.
This includes topics such as:
Database connectivity,
Parameters and Parameter prompting,
Report formulas,
Record selection formulas,
Charting,
Sorting,
Grouping,
Totaling,
Exporting
For questions related to custom application development using Crystal Reports, refer to the appropriate Crystal Reports forum under:
Business Objects SDK Application Development.

Upgraded to Maverick. Can't use my mighty mouse

Using an IMac desktop. Upgraded to Maverick. Can't use my mighty mouse anymore. Bought a trackpad, hate it. It is so touchy....constantly opening any window I scroll over. Any suggestions on another mouse that is compatible?

See these for cleaning the mouse:
http://support.apple.com/kb/TA26691
http://support.apple.com/kb/HT1537
http://discussions.apple.com/thread.jspa?threadID=1243940
http://www.macosxhints.com/article.php?story=20060210115417864

HT5037 I have installed the iPhoto Library upgrade, which confirms it was successfully installed, however when ever I try to open iPhoto 11, it refers me back to the bloody library upgrade again, so I can't use iPhoto any more.

I have installed the iPhoto Library upgrade, which confirms it was successfully installed, however when ever I try to open iPhoto 11, it refers me back to the bloody library upgrade again, so I can't use iPhoto any more.

Thanks, it worked first time that I double clicked as you suggested.
Why do Apple make it so hard to upgrade some programs? They could make the follow through instructions a lot clearer.
Now I have it open- it works and..................... it does look pretty neat.

Just upgraded to Lion and can not use my QuarkXpress program.

Just upgraded to Lion and can not use my QuarkXpress program.

Your best bet is to check the version of QuarkXPress you have. Since Lion does not include Rosetta my guess is this may be why it is not working. Check out this site http://roaringapps.com/apps:table. This site has a list of apps that work and don't work under Mac OS X Lion.
If you are working in a production environment freelance or stuido that uses design apps like QuarkXPress, Adobe InDesign, Illustrator, Photoshop you should always wait to upgrade your OS. We have a 3 to 6 month policy for upgrading computers and software.
I hope the website helps. http://roaringapps.com/apps:table
Good Luck

HT2253 I have power mac G5. I have install Mac OS 10.5.8 onto the computer. Can I use Classic OS 9 ?

I have power mac G5. I have install Mac OS 10.5.8 onto the computer. Can I use Classic OS 9 ?

Thanks. It was helpfull for me.

I have a MacBook Pro with Snow leopard (10.6.8). Downloaded Lion from Aplle store and got a bill but no upgrade. Bad hearing can't use telephone to support. Apple store can't help. CASE NUMBER: 19*****63

I have a MacBook Pro with Snow leopard (10.6.8). Downloaded Lion from Aplle store and got a bill but no upgrade. Bad hearing can't use telephone to support. Apple store can't help. CASE NUMBER: 19*****63.
I am hard or hearing and can't use the telepohne support and live on an island and can't get to a shot to buy the Lion.
<Case Number Edited by Host>

Try d/ling again. In the App Store, option-click the tab

HT4718 after upgrading to Mavericks, i can't use Pro Tools ***

after upgrading to Mavericks, i can't use my pro tools, and none of my iTunes files are there. what the ****? I want to revert back to snow leopard.
PLEASE ADVISE!!!! I'm in a panic!!
I was very happy with Snow Leopard, and then I tried to get an app to design my Christmas cards. The computer told me, i had to upgrade to Mavericks to use it.
Now everything is a complete disaster!

I was not prompted to make a clone, so i dont have one. I downloaded an upgrade of pro tools that is alleged to work with mavericks, but it does not.
I can't find any of my music files, iTunes downloads, documents, etc... But, all the software i purchased to work within pro tools is there. Im so confused.
Im PC, i have never downloaded an upgrade that made all my files disappear. This is totally unacceptable.

Just upgraded to Lion, how can i use my microsoft office especially excel. I'm getting messages that it's no longer supported. This is a BIG problem. Help, please.

Just upgraded to Lion, how can I use my microsoft office especially excel. I'm getting messages that it's no longer supported. This is a BIG problem. Help, please.

Apple has made a serious error not advising people when the Lion upgrade occurs that their present software may/will not be compatible and advise the user of such before and allow a opt out.
All you can do (besides upgrading all your software) is backup your data off the machine (not to TimeMachine) and disconnect all drives.
Hold c boot off the 10.6 disk and erase your makers hard drive on the far left, (that's the entire drive of everything)
Partition tab: Option: GUID, format OS X extended and click apply so you get a new GUID (replacing the Lion one or trouble occurs later)
Quit and install 10.6, then go through setup and use the same name as before, then update to 10.6.8
Then c boot off the 10.6 disk again and use Disk Utility to Repair the disk the 10.6.8 update messed up.
Then install all your programs again from fresh sources and lastly your user files in the same main user folders as before (music, pictures, documents etc.)
Done as described will get you back just like it was before as close as possible, make SURE to use the same username or else your iTunes and other files get all messed up. Password and drive name can be different though if you wish.
Note: if you've upgraded from 10.5 to 10.6, then you don't get the free iLife as it's not on the 10.6.3 white disks, only on the disks that came with your machine. So that will have to be purchased and reinstalled or use Pacifist to extract it from the 10.5 disks.
This handy site can advise you what software doesn't work with the Lion.
http://roaringapps.com/apps:table

QuickTime 7.1.1 avoids using classic programs

After I installed QT 7.1.1 via SU in all classic programs my mouse clicks are not recognized! I can not use the program menue, can not click in a window.
Its like having no mouse!
I can use short cuts with the keyboard, so all classic programs are running fine.
I am using OSX 10.4.6 on a PowerBook G3(Lombard 400).
I know its the PB that is not supported officially from OSX 10.4.
A Pismo 400 would be supported.

I made a restart and all is working now

I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to reprogram a different key to be my plus/equals key? Can I program a function key? key

I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to re-program another key to do that function? Can I re-program a function key to do this function?

Water + electronics do not mix. Something was damaged insode, and the logic board may be corroding as is.
Take it to a Genius Bar for an evaluation and repair estimate.
This is accidental damage and not covered by warranty.

Can we use same program ID for more than one RFC scenarios

Hi experts,
            I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
      IPRODUCT type standard table of ZPMS initial size 0,
      wa_quote type ZIQMD,
      wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
    I_QUOTE       = iquote          .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
    I_QUOTE       = iquote          .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
    IPRODUCT       = IPRODUCT          .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
    IPRODUCT       = IPRODUCT          .
    COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
              Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.

Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh

Can i use engineering programs such as atocad .... in macbook poro 13

can i use engineering programs such as autocad .... in macbook poro 13

The requirements are listed below. If you are going to do serious AutoCad work, a much larger monitor would be a great benefit.
http://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/ sfdcarticles/System-requirements-for-AutoCAD-for-Mac.html

Hello i have a problem i can not use adobe programs. The payment for the month march is not be payed, but i will pay the payment.I can not found where i can do that. Also i see that my membership is stopped.

Hello i have a problem i can not use adobe programs.
The payment for the month march is not be payed, but i will pay the payment.I can not found where i can do that. Also i see that my membership is stopped.

Try the not-charging topic of:
iPod touch: Hardware troubleshooting
It could be that the battery is dead.

Upgraded to 10.3, can't use Classic Program

Similar Messages

Maybe you are looking for