Upgraded to 10.4.10 and auto connect to last wireless network does not work

Hi !
just upgraded to 10.4.10 and now every time I boot I have to select my home wireless network to connect. This while I have the option automatic join selected, which worked until version 10.4.9.
Anyone else experiencing this ?
thanks for your time !

Well, well,
I downloaded the new Safari beta version and went (don't ask why, maybe insanity: doing the same thing over and over again, expecting a different result) to System Preferences->Network again. There I deleted my wireless network (as I did the last time), but now I got immediately a message about KeyChain (which I didn't got before, so I did get a different result !!). And guess what, now the auto connect does work again !
So, the upgrade to 10.4.10 messed with something that the beta upgrade did correct.

Similar Messages

Wrt610n wireless network does not work after firmeware upgrade

Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
Stefan

Update -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

My google bar "auto fill" feature worked GREAT, until I upgraded to Firefox 4. Most of the time, now,it it does NOT work at all.

My google bar "auto fill" feature worked GREAT, until I upgraded to Firefox 4. Most of the time, now, it it does NOT work at all. ???
I have reinstalled my google bar AND firefox 4, with no improvement. ??????????

Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple  menu (top left in your screen) then click: Software Update ...
Carolyn

I recently upgraded my IMac to Lion and have found that my mail account does not include a "mail trash" category similar to "mail sent", making it difficult to retrieve mails I might have sent to trash but find I need some information from. Suggestions?

I recently upgraded my IMac to Lion and have found that my mail account does not include a "mail trash" category similar to "mail sent", making it difficult to retrieve mails I might have sent to trash but find I need some information from. I've searched in settings and preferences and cant seem to find a way to add "Trash" to my Mail categories/folders.
Suggestions?

I recently upgraded my IMac to Lion and have found that my mail account does not include a "mail trash" category similar to "mail sent", making it difficult to retrieve mails I might have sent to trash but find I need some information from. I've searched in settings and preferences and cant seem to find a way to add "Trash" to my Mail categories/folders.
Suggestions?

I have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

i have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

Some updates and clarifications:
1. I already have my 2.4 channel fixed.
2. Wireless network name is 8 alphanumeric characters; no spaces
3. Already using WPA2 security with a 10 alphanumeric key (again, no spaces)
4. I am running Airport Utility 6.0, Mac OS version 10.7.4
I should also say that these problems started happening less than a month ago...prior to that all devices where working normally.
An added update: My two e-readers (nook ST and Kindle 3) are also refusing to connect...perhaps confirming that I have 2.4 GHz issues?

HT2052 After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life

After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life easy

See if placing the iPod in DFU mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Internet Connection - Your Apple wireless device does not have a valid IP.

I just bought an Apple TimeCapsule and set it up normally, following instructions to my Arris cable network on the Videotron provider here in Quebec, Canada. The TimeCapsule did appear as a wireless device on my MacBook Pro (after updating the AirPort software from the provided CD - as was instructed). I went through the whole installation process to obtain at the end this error:
Internet Connection - Your Apple wireless device does not have a valid IP.
The only provided instructions were to check the cable and then contact your Internet provider. Well it seems clear to me that if I contact my provider and say that the internet connection works fine directly on my computer, also fine through my "normal" wireless router but not with my new TimeCapsule, I won't get much of a response.
After a lot of research, a friend indicated the solution in my case.
You have to really reset the cable modem to convince it to start giving out IPs again.
To do this:
1. Unplug your TimeCapsule (possibly you might have to reset to factory defaults - see the documentation)
2. Unplug your cable modem
3. Reset your cable modem by pressing the reset button with a pen (or something) for several seconds.
4. Plug your cable modem back in and let it reboot/restart - until the lights are back on.
5. Plug in your TimeCapsule
Everything should now work and you can restart your AirPort set-up on your Mac.
Good luck!

My ISP is AOL. The service is DSL via a broadband modem. Somewhere during the setup process there appears to be a communicatiosn issue between the Airport Extreme Base Station and the DSL modem. When I hook the DSL modem directly to my iMac I can connect to the internet without any issues.
I tried the factory reset and the DSL modem reboot process described in other posts and seemed very close to success...until the internet setup step. That is where this issue first presented itself.

Itunes is not working on my mac. I'm trying to redeem a gift card and everytime I enter my password it does not work. Also, when I try and browse songs, everything is blank

HELP!
Itunes is not working on my mac. I'm trying to redeem a gift card and everytime I enter my password it does not work. Also, when I try and browse songs, everything is blank

It's been a while but it should work on a Mac because Macs can read Windows formatted devices. Otherwise, you can perform a restore operation to return it to the Mac format. If you go to support.apple.com/manuals/ you can find a copy of the user manual for the model you have in which this is all explained.

TS2771 what to do my ipod touch 4g is updated to ios6 now it has a white scren and wont turn off and to top it off the homebutton does not work at all

what to do my ipod touch 4g is updated to ios6 now it has a white scren and wont turn off and to top it off the homebutton does not work at all please help me

Try:
- iOS: Not responding or does not turn on
-When it says place the iPod in recovery mode use this program instead of the buttons.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

TS3048 My left and right arrow on my wireless keyboard is not working. It does not highlight in the keyboard viewer. What's next?

My left and right arrow on my wireless keyboard are not working. I've looked at the keyboard viewer and see that they do not highlight. What do I do now?

Hello:
Try resetting the PRAM.
Barry

I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work. What should I do

I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
What should I do?

Hi Anto2211,
Please follow the thread: Black screen CC where this issue is already discussed and resolved.
Let me know for any further query.
Thanks,
Ratandeep Arora

I bought Lightroom 5 and installed it. I was asked for the Serial number and I entered it. But it does not work. Why?

I bought Lightroom 5 and installed it. I was asked for the Serial number and I entered it. But it does not work. Why?

To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html

Im tryting to install new itunes but says windows installer, you are tring to use is a network resource that is unavailable. find folder itunes.msi i dont have a folder like that and anything i use that is related does not work. help me?

"you are tring to use is a network resource that is unavailable. find folder itunes.msi" i dont have a folder like that and anything i use that is related does not work. ive tryed to uninstall but still does the same thing when.

Should the advice above not fix things for you...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

TS3048 Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

Try resetting the PRAM and SMC. Try making the device a favorite .
Barry

Upgraded to 10.4.10 and auto connect to last wireless network does not work

Similar Messages

Maybe you are looking for