Upgraded to 10.4.10 and now device not recognized

I upgraded my iTunes and now I cannot use my iPod (5th generation) on my computers. I tried this on both my work computer (a Windows 2008 R2 server) and my Windows 7 Ultimate. I now get an error that no iPod is attached. I had tried uninstalling/reinstalling, every trick proposed. The iPod connection had been working before the new iTunes version.
I was going to submit a support request but I don't want to pay for what appears to be a bad software update!!!
Microsoft Windows 7 Ultimate Edition Service Pack 1 (Build 7601)
alienware X5DAL
iTunes 10.4.1.10
QuickTime 7.7
FairPlay 1.12.20
Apple Application Support 2.0.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver not found.
Bonjour 3.0.0.2 (333.2)
Gracenote SDK 1.9.1.485
Gracenote MusicID 1.9.1.102
Gracenote Submit 1.9.1.133
Gracenote DSP 1.9.1.43
iTunes Serial Number 0019B13802EC41E0
Current user is an administrator.
The current local date and time is 2011-09-22 20:39:43.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., RADEON 9800 XT
ATI Technologies Inc., RADEON 9800 XT - Secondary
ATI Technologies Inc., ATI Radeon HD 4600 Series
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 10.4.1.10 is currently running.
iTunesHelper 10.4.1.10 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2. Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4. Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7. Device is working properly.
Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPod (5th generation) running firmware version 1.3
Serial Number: JQ609DQDTXK
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

dubcrew, Welcome to the discussion area!
...and the status says "no airport hardware found" Apple tech support says i should move any microwaves...
Whoever you talked with doesn't know what they were talking about. The Mac's ability to detect the card has nothing to do with RF interference.
Try resetting the PRAM.
If that doesn't work, try resetting the open firmware. The procedure is
Start up into Open Firmware by pressing and holding the Command-Option-O-F key combination during startup.
At the Open Firmware prompt, type: reset-nvram
Press Return.
At the Open Firmware prompt, type: reset-all
Press Return.

Similar Messages

Upgrade to media source 5 and now does not recognize my Zen Touch player!?

JUpgrade to media source 5 and now does not recognize my Zen Touch player!
st off, I was having issues with mp3's transferring to my zen touch, it would say file cannot transfer, invalid format or something of the like.. The creative audio converter would not allow the file to be converted as it said the source was not availble, all odd as the files worked fine on my computer and were mp3 format. I did get them to transfer after downloading another 3rd party converter, I wanted to get past using another program though so I updated to media source 5, along with firmware updates to most recent for the zen touch.
Once I had updated it would not recognize my player, I opened version 3.xxx whatever and it did recognize. Thinking maybe it has an issue with both being installed I unistalled the old version. Same problem, still does not see my player. I upated the driver for the player as well, and my computer now could see the zen touch instead of unknown usb device, media source 5 no go still at this point. I opened windows media 0 and it saw the player and I could transfer files, but the lay out and editing cababilities are limited.
Basically I want to know what to do get this thing detected so I can use media source 5 to organize my files. Someone please help me.

N Oh how I love the beauty of forums! Fantastic. So you know the fix went for my issue here, I had already upgraded the zen/jukebox driver to version 2.0 to no avail, and did not get the play for sure firmware as it says all data will be lost, but I did upgrade with the other option on the support downloads section before as well to no avail. Thanks to?GuyGraham, after I installed the app update for Creative ZEN and NOMAD Jukebox Plugin 5.00.22 for Creative MediaSource 5 Player/Organizer it works once again!! I just do not see how this file isn't included with the media source 5 application in the first place. Either or thanks a lot you guys, problem sovled!

I upgraded to FF 5.0 and now do not have ADD ONS or EXTENSIONS showing up under TOOLS.

I upgraded to FF 5.0 and now find that I am missing ADD ONS and EXTENSIONS under TOOLS. I have looked everywhere - help??
Windows 7 Professional
Xmara

Hi :) but the thing is... I *do* have extensions and add ons that work fine but I do not have the options under TOOLS to to access them as extensions and add ons do not appear when I click on tools. The two items are not listed under tools when I click on it on the top menu. So the ability to disable addons is not available. My FF is broken :(

Read this Catherina and Dale: Device not recognized WMP11 Media Explo

Dale's post on connection problems is broken. http://forums.creative.com/creativelabs/board/message?board.id=dap&thread.id=73478
Additionally, there is an issue with Windows Media Player and the Zen Media Explorer. I have verified that you can have one or the other installed, not both, or you will receive 'device not recognized'. ?
I've successfully connected to WMP without Zen Media Explorer installed. I've also rolled back to WMP0 and installed Zen Media Explorer. No other config will work reliably. (There were times with WMP and Zen Media Explorer that it would recognize my ZVM for a short period then 'lose' connection).
Additionally, if trying to install Zen Media Explorer with 'ZNVM_PCApp32_LA_6_2_0.exe' from your download page, you get some nonsense that it's not supported under XP SP3. If you install the older version directly off the CD and patch with 'ZNVM_PCPatch_LA.exe' there is no message of an unsupported OS and installs just fine.
I hope this info gets stickied and the issues addressed promptly.

Hi,
Thank you for your feedback. The links on that post has been updated now.

Just upgraded to 10.6.3 and now will not recognise old library

When I upgraded to 10.6.3, I got a message asking my to create a new Library. OK I thought Apple knows what it is doing. So I created a new Library - itunes1 and now when opening itunes it is itunes1 and empty of all music, podcasts and playlists.
How do I get them back? I am running windows 7

Actually thanks, have sorted it by deleting itunes and repairing, then whe nasked for itunes library not creating a new one - moron, just pointing it at the old one

Iphone Upgraded to 3.1.3 and now its not working

Hi,
I just upgraded few days ago from 3.1.2 to 3.1.3 and now my iphone will not get out of the recovery loop.. I tried the 2 restores using Win7 and the other 2 on a MAC and it will not go out of restore.
Is there a way i can go back to 3.1.2 because it was working fine. I only upgraded because Itunes checked online and there was an upgrade.
Please help
Ryan

KP61 wrote:
just gone through 2 more restores and I am still in the loop with no luck.
any other suggestions?
Does the restore appear to complete successfully?
Did you run into any issues while following the suggestions in the article that I linked earlier?
If you haven't already, try restoring the iPhone from another computer.
Also, you can make a reservation with a Genius at a local Apple retail store here: http://www.apple.com/ca/retail/geniusbar/. The Genius can generally replace the iPhone on the spot, if there is a hardware issue.
-Jason

I upgraded to 31.3.0 and now can not receive e-mails, even though I can send them.

Have used Thunderbird for years, but have not been able to receive e-mails for two days since the upgrade. Able to send e-mails, but not receive. Tried deleting e-mails for last few days on server and on Thunderbird, but no change. Tried deleting saved password on Thunderbird, but it only asked for new password when sending e-mail, but does not ask for password for receiving. Tried re-installing Thunderbird, but no e-mails received.

I solved the problem by changing Account Settings / Server Setting changed the port to 995 (default was 110) and the security to SSL. (Not sure how the upgrade changed these settings).

Installing IOS 5.1.1 on my iPhone failed and now is not recognized by PC or itunes. All troubleshooting has failed. HELP!!!

Installing IOS 5.1.1 on my iphone failed and now the phone will not show up on itunes and is not recognized by my PC. I tried all troubleshooting Apple says to do minus uninstalling itunes. My wifes iphone still works fine with the same cable and itunes on my PC. ----- Help!

Hello. I was like this yesterday after upgrading 5.1.1. The proccess failed and the iphone only showed the USB cable with the iTunes logo.
What I did was connect the iphone to my wife's PC, and there, with a clean itunes installation, install a clean 5.1.1. Then, went back to my iMac and connect it again, and now it works.
But now, with my iphone working as new, it still cannot be showed up in itunes. I am still working on it.
Good luck!

Just upgraded to 8.1.2 and Brother scanner not recognized

I've been using Acrobat Pro v. 6.0.6 with the Brother scanner just fine... update to 8.1.2 and it is not available to select as an Input Device from the Acrobat Scan window. I went back to try the previous version of Acrobat ( I still have v. 6 on my machine) and it still sees the Brother scanner as it has all along.
I'm on an Intel iMac running 10.4.10.
Let me know if you need any further info.
Thanks for any assistance,
Scott

It didn't for me. I have the Brother MFC 7820N with the latest driver which used to work fine with Acrobat 8.1.1 but now when I scan it just freezes after asking for the file to save to. I have to Force Quit Acrobat to get out of it.
Photoshop CS3 and other applications have no problems with the scanner.

Develop software for connecting to creative zen touch and other devices not recognized by wind

hi there,
as a programmer i wonder, is it possible to obtain information of how to connect to usb-connected creative device (which is not recognized automatically by windows, as the zen touch) and how to communicate with it's is there any documentation about that available to "non-creative" ;-) developers?
the idea is to create a plugin (e.g. for musikcube) that enables the programm to access the files on the device.
i know there are third party companies that do provide software for connecting to e.g. zen touch, but i do not think that they have figured out every little bit by themselves, have they?
greetings and thanks a lot
asdf

Try this:
Download <a href='http://www.delldjsite.com/forums/attachment.php?attachmentid=444' target=_blank>this[/url] file. Extract it to whatever folder you like. Inside that folder run the file fixup.cmd. A DOS window will open up and start display messages on what its doing, when its done it will instruct you to remove the device from Device Manager and reconnect it.
Try this and see if it works.

Upgraded to 3.6.9 and now will not bookmark, automatically reloaded 3.6.2 twice, now on 3.6.10 same problem with bookmarking, safe mode makes no difference

After upgrading to 3.6.9 firfox will not bookmark some pages, once would not load, has twice atomatically re-installed 3.6.2. Upgraded again to 3.6.10 had have same problem with bookmarking

The answer is in the diagnostic! Go to the Toshiba site (I've been so nice and found the link for you!)
http://www.toshiba-europe.com/storage/Index.asp?page=PFT&nav=ISH_ARC&model=SDR22 12
Try updating your drives firmware. Click 'Firware Updates' on the right hand side of this page, then follow the instructions and download the update, then install. See if that helps. Its worth updating the firmware anyway :P

While upgrading Mavericks computer shut down and now will not reboot after pressing power button or in safe mode

MMacBook pro running mavericks. Updating to latest version of Mavericks computer did not restart. Could not boot into safe mode either. Spinning wheel goes on and on

Try a SMC reset:
http://support.apple.com/en-us/HT3964
Ciao.

External hard drive won't erase and now is not recognized

My 1 TB WD external hard drive was partitioned into 2 partitions. The top partition was for Time Machine, the bottom for my personal files. Those personal files are not on my regular hard drive so I decided I needed to get another external hard drive to back them up. I bought a 2 TB WB and set up Time Machine with that drive to back up my computers hard drive as well as my 1 TB external hard drive. Through my online research I discovered I couldn't make the 1 TB into one partion without deleting my personal files, so I figured since it was backed up on the 2 TB it would be okay. Just to be safe I backed it up onto a 500 GB Seagate as well (this drive crashed a while ago and then randomly started working again, so not too trustworthy - if anyone knows how I can make it trustworthy again, that would be fantastic). Then I partioned the 1 TB into 1 partition. Success. I went to erase it and selected Zero Out Data. This failed "Volume Erase failed with the error: Disk object invalid or inable to serialize." And then my hard drive disappeared. I've been able to open it in Disk Utility and partion it again into 1 partition, but each time I try to erase it, it always fails. Is something wrong with my drive? Is this external hard drive truthworthy to hold important files without crashing again?
Here's a screenshot of what happens when it fails. Yay.
After the Zeroing out doesn't work, this box pops up. And then my drive disappears from the desktop.
At one point the partition failed, but it seems to have gotten over that. Although each time I try to erase and it fails, I have to rename and repartition my 1 TB external hard drive so it shows up on the desktop again.

I came back from uni and it looks like the writing zero's was effective. There were no "failure" boxes. And here's the final reading for the partition and then the whole drive. Does anyone know why it says 12 folders and 66 files (more filed than when it started writing)? Does this mean it's not zero-ed out? Can I use this external hard drive?

HT1386 After the recent iTunes my PC recognizes that I have connected my iPhone, but iTunes does not. I tried the trouble shooter; it said device not recognized. I clicked the help button as instructed and get iPod not recognized instructions. What for iP

I have not been able to sync my iPhone 5s on my PC sincethe most recent update to iTunes. My computer showsthe iPhone as connected, but iTunes does not recognize it. I tried the trouble shooter and got device not recognized. I clicked the help button beside the failed test and get iPod instructions. How do I get iPod instructions for work for an iPhone? Better, how can I get this to show iPhone instructions? (On my other computer, I had to uninstall every Apple product to get the new iTunes to work.)

You wrote: (On my other computer, I had to uninstall every Apple product to get the new iTunes to work.)
You may have to do this on this computer as well. http://support.apple.com/kb/ts5376

Disk Image Won't Mount - Reason: Device Not Recognized

As I've searched the discussion forums, I've seen plenty of postings for "Disk Image Won't Mount" and for "Device Not Recognized" but not the way I'm seeing it on my laptop.
After a backup and restore, my mac will no longer mount any... and I mean any images. I have downloaded several security or software updates from different vendors and each .dmg file will not mount. I still have the .dmg files in hopes that after I get this problem solved, I'll be able to install them, but...
It always gives the same reason for not mounting and I'm at a loss on what to do next. I've run Software Update hoping it will be a quick fix, but have had no success.
Any suggestions?

I have a similar problem. Using FireWire disk mode, I put a disk image of my entire iBook onto my iMac as a back-up. (For an unrelated problem, Apple told me I needed to erase my iBook completely and do a clean install of the system.) Well, I screwed something up. I don't know what exactly--maybe I didn't "put away" the device correctly, but the next day when I flipped on my iMac, the disk image of my iBook was just gone, and not to be found anywhere. I finally succeeded in restoring the image using TechTool, which scanned the entire volume of the iMac for directory information. And it's all there, because the img file is more than 10GB. But when I double-click on it, I get the following error msg: "The following disk images failed to mount...reason--not recognized." I've checked the app it's supposed to open with, permissions, and run Disk Utility volume repair. No dice. Any ideas??? Did I mention that this is EVERYTHING I had on my iBook???

Upgraded to 10.4.10 and now device not recognized

Similar Messages

Maybe you are looking for