Upgraded to 10.6.1.17 and now purchased songs skip

So I upgraded a couple days ago and have noticed that certain songs skip before the song is finished, anywhere from 60-20 seconds before the end of the song. The only songs I've noticed this on are purchased from the iTunes Store.
Crossafde is off and when I look at the songs the start and stop times are unchecked, but show the correct times? Seems to have been an ongoing issue for lots of users over the years, but I can't seem to find a solid answer?
Or how can I go through and force iTunes to re-download my purchased songs? It seems to think that as long as I have them I'd never need to download/replace them?
Thanks!

Clay & David,
I had the same issue. Spent hours downloading, reinstalling and restarting. No luck. Found Ian.Gilmore's solution posted in Feb 2009 (Ian you are a saint). You use the Epson user interface to configure your network. Verbatim instructions are below. Press the "Home" button on the Workforce 600 interface panel. "Search SSID" brought up the name of my network and I used it rather than "WPA-PSK (TKIP)"
Here is Ian's solution:
"I was having the same issue. The Epson Software couldn't find the printer when it was connected via ethernet to my computer. I instead went through the actual printer UI and chose: Setup > Network Settings > Wireless LAN Setup > Manual Wireless LAN Setup > Infrastructure Mode > Search SSID > WPA-PSK (TKIP)
Once the printer connects to the network you can simply add it via Print & Fax."

Similar Messages

I updgraded to IOS 6 and now downloaded songs skip to the next song every two seconds on both my iphone and ipad, and some do not skip. What is going on?

I downloaded the same songs on another phone working in IOS 5.1.1 and there is no problem. Is this a bug? or is it my imagination?

I've spent most of the last two days trying to restore from back-ups and set up as new and neither worked. iTunes stopped recognizing it AS an iPod at one point so I tried reinstalling iTunes to make sure it was all up to date but it's still doing the same thing. Freezes or disconnects during sync or throws up an error message and 95% of the music that "has" synced is greyed out and not playable. I'm assuming the update has a bug cos these forums are full of problems people are having since the update, I had no issues with anything before this upgrade was installed.

Downloded upgrade of itunes on my computer and now it dosn't work at all. downloaded again and still will not work.

I downloded upgrade of itunes on my computer and now it dosn't work at all. i dowloaded from the web site, but still will not work. can anyone help.

Put it in DFU mode and restore it. (google for instructions on entering DFU mode).

I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?

I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?

Hi,
PSC 1315 no longer supported for scanning since Mac OS X v10.5 or while using any newer OS, there is no scan software provided by either HP or Apple (Image Capture)
You may find this information stated below for Leopard, the same apply for any newer OS version:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01234231&cc=us&dlc=en&lc=en &os=219&product=374568&sw_lang=
Image capture will not recognize your device as well, only print is supported as you may find listed for teh PSC 1310 Series below:
http://support.apple.com/kb/HT3669#HP
Although there is no official scanning support for your device you may still try the 3rd party VueScan software which list your scanner as supported and compatible with Mountain Lion:
http://www.hamrick.com/vuescan/hp_psc_1310.html
Shlomi

Upgraded to OSX 10.8.2 and now I can't run any downloaded dmg files.

Upgraded to OSX 10.8.2 and now I can't run any downloaded dmg files. Says "the Following disk images couldn't be opened". and then say's there "isn't enough disk space" I'm pretty sure it has something to do with apps that are not approved by the app store. How can I turn it off?

Select your hard drive in the Finder and choose File -> Get Info. What is the available space?

I recently upgraded to iOS 7.0.3 and now my iPhone 4S will only sync purchased music to my phone from iTunes. Help! I have TONS of music that I have bought and burned to my computer, but cannot listen to it on my iPhone. This seems ridiculous!

I recently upgraded to iOS 7.0.3 and now my iPhone 4S will only sync purchased music to my phone from iTunes. Help! I have TONS of music that I have bought and burned to my computer, but cannot listen to it on my iPhone. This seems ridiculous!

Also, it's taking FOREVER (over an hour) to sync my iPhone to iTunes...

I upgrades my iPAD 3 to iOS6 and now I can't open my Safari RSS bookmarks. Any ideas to help?

I upgrades my iPAD 3 to iOS6 and now I can't open my Safari RSS bookmarks. Any ideas to help?

I've installed 3 different RSS readers and none of them "grab" the default flag for RSS feeds.
I've also uninstalled the Podcasts.app, then re-installed a couple of the readers and Safari still has no idea what to do with them.
What's most annoying is that Safari declares it doesn't know what to do with a feed and offers to load the iTunes Store so I can pick an RSS Reader to install, and then the iTunes app declares it can't connect to the store (even when I'm already on the store or downloading an application at the time).
And yeah, I've tried the fixes for the cannot connect errors (Date/Time flip, reinstall bought app, setting DNS to Google even though it was already fine, and clearing Safari's cache just in case).
This is absolutely pathetic.

I have upgraded to Pages 5.0.1 and now I cannot print or pass along "comments" in the text of a document. I previously was able to convert the Pages document, with comments, to a "Word" document so that others could view the edited text. How do I do that?

I have upgraded to Pages 5.0.1 and now I cannot print or pass along "comments" in the text of a document. I previously was able to convert the Pages document, with comments, to a "Word" document so that others could view the edited text. How do I do that?

When you installed Pages v5, it automatically moved the older Pages ’09 v4.3 into /Applications/iWork '09 folder. If you want normal comment interoperability, you are advised to resume using the older version of Pages. Newer, is certainly not better with Pages v5.

I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try.

Is it possible to have two versions of Muse on one Machine? WhenI open Muse from my program menu in WIndows 7 it comes up the way I am used to. I did an upgrade a week or so ago and now I have an Adobe Muse CC 2014 on my desktop. WhenI open the applica

Is it possible to have two versions of Muse on one Machine? WhenI open Muse from my program menu in WIndows 7 it comes up the way I am used to. I did an upgrade a week or so ago and now I have an Adobe Muse CC 2014 on my desktop. WhenI open the application that way the GUI interface looksw totally different, more like Illustrator. What is that all about?

Since posting the above, I have resolved a sensible work-around in regard to ebookstores which prefer us to have separate accounts for our separate Adobe IDs.
However, I really would appreciate it if anyone here can confirm that a DRM controlled book does actually become associated with a particular Adobe ID account at the time of first download to Digital Editions on that PC/device.
Two large book stores have said using my account with them to download books to our two separate Adobe IDs is OK, but I don't want to find my husband is unable to open his downloaded books.
Thank you folks for any advice you can give,
Sue

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

Is this what you downloaded: iTunes 10.7?
When the update fails what if any error report do you get, specifically? Please do this before trying again:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

SSign in to the App Store using the Apple ID that was used to purchase the software.

IMovie wii no longer share with iDVD. I just upgraded to Yosemite 10.10.2 and now I can't get iDVD to work properly. Any thoughts?

iMovie wii no longer share with iDVD. I just upgraded to Yosemite 10.10.2 and now I can't get iDVD to work properly. Any thoughts? This is what comes up.....

iDVD does work with Yosemite although, as Kappy pointed out unsupported for 2 years, so try this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/Preferences folder.
2 - delete the contents of IDVD'S cache folder: User/Home/Library/Caches/com.apple.iDVD.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks or Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
If iDVD crashes again post the first 50 lines of the crash report. Don't post a screenshot but copy and paste the actual text.
To get a movie from iMovie to iDVD it should be exported out of iMovie as 480p and added manually to iDVD.

Upgraded to 10.6.1.17 and now purchased songs skip

Similar Messages

Maybe you are looking for