Upgraded to 10.6.8 and now can't import photos from Olympus camera

1. Recently bought a new Olympus VR310 digital camera. I couldn't get either Image Capture (6.0.1) or iPhoto (9.1.5) to import images from day one, onto my Mac Mini running Snow Leopard 10.6.8. However, if I took the SDHC card out of the Olympus and put it into an older Canon Ixus digital camera , and used that to upload, then both Image Capture and iPhoto worked perfectly. So it's not the card. Or the USB connection. It's something special to the Olympus and the Mac. Obviously I tried all the usual stuff about dumping plist files etc. Nothing worked.
2. The problem manifests itself, when the Olympus is connected, as Image Capture being unable to show more than one, if any, thumbnails, and it is unable to import at all. In iPhoto the problem manifests immediately it calls up the Olympus as a connected camera. The dreaded spinning beachball of death kicks off, and the program 'stops responding'. Even after I quit iPhoto and unmount the Olympus, iPhoto will not open without the spinning ball of death until I restart.
3. Anyway, I tried connecting the Olympus to my son's Macbook, (System 10.6.7, Image Capture 6.0.1 and iPhoto 9.1.1) and all worked perfectly. Hmm… so it's NOT just down to the Olympus. It's something to do with my setup.
4. I also have a bootable USB drive connected to the Mini, so I booted into that, so I then have my computer and my user preferences etc running under the bootable drives System 10.6.6, Image Capture 6.0.1, and iPhoto 9.1.5. That worked perfectly with the Olympus too. So it's not my the combination of my user settings, Image Capture 6.0.1, or iPhoto 9.15, or the Olympus.
5. My guess then was it was some corruption of the system on the Mac Mini. So I reinstalled the Mac Mini system, from the install DVD, so I had a nice fresh Snow Leopard 10.6.0. That gave me Image Capture 6.0.1 and iPhoto 9.1.5. When I attached the Olympus, everything worked perfectly. Great.
THEN, I updated the system from Apple's Oftware Update, all the way to 10.6.8, which is where I started from.
6. And guess what. Nothing works anymore. Immediately before the update, the Olympus importing worked. Immediately afterwards it didn't. I'm back where I was at the beginning, with exactly the same problem.. I can't import from the Olympus but the Canon is fine. (see 1 and 2 above)
So, it seems to me that the Upgrade straight to 10.6.8 is what caused the problem. And given I could get the Olympus to work on my son's computer (system 10.6.6) it's something between 10.6.6 and 10.6.8. Why the Canon works on all the permutations, and not the Olympus, I don't know. I don't know why the Olympus ONLY doesn't work with 10.6.8.
7. Obviously there are tedious workarounds (but none that lets iPhoto capture the photos directly) which I can use to get the images into iPhoto eventually, but hey, this is an Apple Mac, who wants to be doing tedious workarounds all the time.
I've had Macs since 1984 (I'm that old…) so I'm a fan, and I'm reasonably competent, but this has me stumped.
Any ideas, anyone.
Any help much appreciated.
Ian Waterston

You launched iPhoto and from its Preferences you selected Connecting camera opens.....

Similar Messages

CS6 Just upgraded my mac to Yosemite but now can't import graphics from photoshop to illustrator. Does anyone know a solution

CS6 Just upgraded my mac to Yosemite but now can't import graphics from photoshop to illustrator. Does anyone have a solution?

My advice to you is, if you can, drop back to Mavericks. You will have better luck since CS4 is not supported (nor are CS5 or CS5.5) on Yosemite. The other alternative is to uninstall the entire suite, run the cleaner tool and reinstall completely from the original discs or a new download. Be prepared for other fun stuff as well.

Updated Mac book pro to Lion, now can't import photos from Nikon Coolpix P3

Updated Mac book pro to Lion, now can't import photos from Nikon Coolpix P3

You launched iPhoto and from its Preferences you selected Connecting camera opens.....

I have been using iphoto 09 and am now unable to import photos from my camera. I get the message that they are being imported but after 10 minutes nothing has actually been imported.

I have just been trying to import photos from mine and my husbands cameras but nothing seems to be happening. I get the message to wait while they are being imported but after 10-15 minutes, nothing has been uploaded. I have always had updates downloaded when they become available and can't think what I may have done wrong.
I hope someone out there can give me some advice. My mac is running Snow Leopard and I love it.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Can't import photos from kodak camera, after4 years of successful? importing

I have been using a Kodak Z740 camera for last few years . I now find that while I can see the photos on the camera review, when I import them to iPhoto, I can only see blank thumbnails. Yet if I deep dive into Picture folders I can find them eventually.
I also use iPhone for photos and no issues there.
Any ideas?

Welcome to the Apple Discussions. Did you read any of the other topics regarding the Kodak Easyshare?
iPhoto no longer recognizes photos from my Kodak EasyShare V803
Just do a search in the form for "Kodak Easyshare" and you'll get lots of posts.
OT

Can't import photos from my camera since the update, says file is unrecognizeable

Since the recent photos update, I can no longer import photos from my Kodak Easyshare camera. Previously all I had to do was plug it into the Mac, turn it on and it would import with no problems. Now it is telling me that the files are unreadable or something. I don't know how to find the camera as a device on the Mac when its plugged in, to go at the problem that way. Not sure what to do at this point. Getting frustrated.

MHoward71 wrote:
Yes it is OS X Yosemite 10.10.3
Then use either of my recommendations above. If you decide to get a card reader (I'd recommend this!) then simply insert the card into it, connect the reader to the Mac and use Photos import feature and import from the card. If you need additional help using Photos please use the Photos forum, you can get there by clicking Photos for Mac

I can't import photos from my camera in aperture.Nothing is happening when I plug the camera into the computer. This has not happened before.

All of a sudden, I can't seem to import photos from my Canon to Aperture. Nothing is happening. This hasn't happened before. What can I do?

All of a sudden, I've got the same problems too. Canon EOS camera connected via USB to Aperture, and nothing happens. I've got Aperture running, and using System Profiler the camera shows up on the USB tree. Using Image Capture the camera shows up briefly, but then disappears. I know it's not a battery problem with the camera, since it's fully charged and it's not a USB problem since the cable works for everything else.

I can't import photos from my camera to iphoto

When I try to import my photos from my nikkon digital camera memory card to iphoto it starts downloading but after about 100 pictures a message appears saying error downloading image - iPhoto cannot import your photos because there was a problem downloading an image. I've tried to import a few at a time and it worked with some but with most the same message keeps appearing. What do you think could be the problem? How can I fix it?

Make sure your HDD is not near full, my wife is queen of this. Take your un-frequency used photos and move them to an external HDD, you are probably getting too full on your internal.
Drives are cheap, allows you to keep your priceless photos, avoiding a catastrophic loss. This will be an easy storage trasnfer, which will you free you up to use your internal drive.
My wife has done this before and now she keeps her HDD clean, which allows her to use her MAC as a trasnfer-station.
Try this and maybe it will help you out, but, do it soon, before your HDD crashes, and you loose all your stuff.
Also, spend the smal amount of money to buy a back up drive for your photos/music.
Also make sure you spend the small amount of money to buy a Timemachine backup drive.
If you ave plenty of HDD space, make sure you have the latest RAW camera drivers installed, which can be downloaded from the Apple Support site.
All the Best

Can not import photos from Canon camera to iphoto '11

When connecting my Canon to iphoto '11 I click on the "Import photos" button and get the following message:
Unreadable files: 113
The following files could not be imported. The file is an unrecognized format.
This is the first time this has ever happened to me. I've done nothing different that I'm aware of. They are all jpegs.
Any ideas?

I just had the same issue with an S-90 (I also have never had this problem before.) and had to use a card reader (my iMac has one built in) instead of importing through the camera. The built-in card reader worked with no problem.

Moved my iphoto library to an external drive and now I can't import photos from my camera or iPhone - will only import previously impoted photos - why?

Anyone else had this problem? Anyone know how to fix it?
I haven't deleted my photos of my computer's hard drive yet so can go back to using that if it will fix my problem
Thanks

No that is not a problem and no one has reported it here
to change the library depress the option key and launch iPhoto and use the select library command - see if the behavior is the same on both frives
How did you move the iPhoto library to the external drive?
What format is the external drive?
LN

I've used iPhoto to import photos from my camera.HOW and WHEN can I safely disconnect my camera for the mac mini.

I've connected my digital camera to my 2013 mac mini and used iPhoto to import photos from the camera.
HOW and WHEN can I safely remove the camera please?

Dismount the camera by clicking on the unmount icon on the right in the iPhoto source pane. Once it is unmounted remove it
LN

How can I import photos from camera to computer?

The "Get Photos" selection has disappeared from my Elements 9 screen. How can I import photos from my camera to my computer?

Yes, the entire top bar disappeared. I no longer see the place to click to
initiate the import, and I don't see the place to select the camera from
which to import or the place where I used to select a file or create a new
file in which to save the pictures when they are imported. I clicked
Organize when I entered the program, but everything looks slightly
different. What can I do. I certainly don't want to jeopardize over 3,000
photos installed.
Thanks.

I just upgraded to Snow Leopard, and I have Aperture 3.1.3. Now after I import pics from my camera I get a dialog box so large I can't get to the eject card button. I have to force quit Aperture. How do I fix?

I just upgraded to Snow Leopard, and I have Aperture 3.1.3. Now after I import pics from my camera I get a dialogue box so large that I can't see the eject card button. Consequently, I can't get rid of the dialogue box without having to do a force quit on Aperture. How do I fix?

I can drag the dialog box, but I can't move it up far enough to get to the eject card button. The dialogue box contains all the jpeg Numbers I am trying to upload. It has never done that before. It used to be just a smal dialogue box with no jpeg numbers in it.
It is even difficult to get to the Finder with the Dialague box is open. I have to force quit aperture.
Any ideas would be appreciated.

Have updated to yosemite and now can't import tiffs into illustrator

Have updated to yosemite and now can't import tiffs into illustrator. Help!

sued,
It is known that there are CS4/Yosemite issues.
For your issue, you may try to save your TIFF as a Photoshop .eps file and import that.
Or a rollback to Mavericks.

Can't import photos from my iPhone into iLife '08 after upgrade to 10.5.1

I can't import photos from my iPhone into iLife '08 anymore after upgrade to 10.5.1.
It used to work great...now this. Sad, sad, sad I am.
I tried the "FIX" of refreshing phone and sync history, but it DID NOT WORK for me. HELP!
Please help, somebody.
Saint Podoreo

I have the exact same issue, but with a standard IMAP account and SMTP. My iPhone can send out, using the EXACT same settings, from the exact same WiFi connection...but the 10.8 MacBook cannot send at all. The only account I can send out on is my iCloud account.
I have also tried all the steps above...no luck.
I have also turned off all network filters and firewalls...no luck. (And as I said above, my iPhone is on the exact same WiFi connection and using the exact same settings, and it can send fine.)
Other messages I've found via Google have suggested simply forcing the SMTP server to use Port 25, but that didn't work for me either.

Upgraded to 10.6.8 and now can't import photos from Olympus camera

Similar Messages

Maybe you are looking for