Upgraded to 10.7.2 and Spacenavigator stopped working
Upgraded to 10.7.2 and Spacenavigator stopped working in Archicad 14. Anybody else having similar problems? It was working ok on 10.7.1 but has completely stopped working now.
For those people who are having this issue. Open System Preferences and log out of MobileMe and then restart your computer. After it has restarted, open System Preferences and log back into MobileMe. Restart your computer again and the problem should be resolved. I hope this helps. It worked for me. Good luck! Cheers, jtw335
P.S. The CSConfigDotMacCert message only displayed when I was logged into my Standard account. If I logged in using my Administrator account it would not display, I'm assuming because it didn't need the administrators permission.
Similar Messages
-
Hi, I use facetime regularly with my parents who live outside US and it stopped working. Their ipad2 rings,says connecting..and then 'call failed'. Upgrading their iOS5 (or 6) is not a option as my parents do not know to do this. I came across forums where this issue is mentioned on apple support and cnet.
Is there another option apart from upgrading ?Well, in his defense, his parents bought him the player so I guess we can't blame him. Though the 6 GB versions were available in November so I guess they really did get 'nervous' about Christmas and like to get their shopping done early! Kudo's to you for trying to remain with the Creative line but for what you're looking for it's obviously not the player for you. Creative seems to be fine-tuning their line for the audio crowd. I'm into mp3 players for the audio. Sure, the ability to watch video's and look at pictures on a decent screen is a plus but for me at least, it's all about the music. And with music, 6 GB is more than enough. Heck, 8 GB would have been more than enough for me. I'm a subscriber to Napster-to-go, so I don't feel the need to carry 00 plus GB of stuff on my portable player. I honestly don't understand the desire to watch movies or TV shows on tiny little screens. But you're also talking to a guy who doesn't watch television. What a complete waste of time and brain cells. Probably the **competitor products we can't discuss here** or one of those players would better suit your needs. Companies are definately picking their niche markets carefully and Creative's decision to not offer hard dri've players any more seems to definately be saying bye-bye to that market. I can't say I blame them. Hard dri'ves eventually give up the ghost and are quite delicate for people on the go. Good ridance, I say. Let Apple, Zune and all the others cater to the Z generation's need to be spoonfed their video/TV addictions anywhere and everywhere. I'll pass. It's one thing to be able to enjoy some music on the go and enhance an otherwise dull work day or dri've. But movies/TV shows at work, school, or wherever? Please. Cut the cord! Just my $.02 - YMMV! M.Message Edited by Dale-CL on 2-26-2007 :4 AM
-
Upgraded to yosemite and cc stopped working
i upgraded to yosemite and following advise i also upgraded to java 8
restarted but cc bridge and photoshop stopped working
i assume this is a common issue.
Could I have advice on what to do?Moving this discussion to the Photoshop General Discussion forum.
Rergam do you receive any specific error messages when you open Photoshop CC? -
Toupad Tapping and Scrolling stopped working after Windows 10 Upgrade
Hi, I upgraded my OC to Windows 10 today, after the upgrade tapping and scrolling stopped working on the synaptics touchpad. the toucpad only finctions as a pointer now. for taps/Clicks i always have to use the buttons below the touchpad. It was working fine before the upgrade, the earlier OS was Windows 7 I have checked for driver updates but i get a message that the drvier is up to date.I have check the device setting and confirmed that tapping and scrolling is enabled.I have also done a device reset. Nothing solved the problem, i also did not find a relevant answer on the forums.Also, the same problem did not happen with my other HP laptop (Notebook PC) which was also upgraded to windows 10 recently. Does anyone have a solution? Regards,Siddharth.
, Hello and thanks for posting on the HP support forums. What you will need to do is the run the Windows Update Fixer tool. Here is a link to help you with that. Make sure you run all updates including optional. Fix Microsoft Windows Update Issues If that fails to work the only other option is to roll your system back to the original supported operating system that came with your notebook. Thanks again for the post and have a great day.
-
After upgrade exchange owa, ecp and outlook stop working
Yesterday I installed the updates that Microsoft had released. Unfortunate as it looks like OWA, ECP and Outlook stopped working after this installation. See picture for the updates were made.
What you are greeted by when besker OWA and ECP is a blank page. Is anyone had the same problem and knows how to fix this?
Or is there a way to back these updates?
Jesper BHi Jesper,
Is there any update? Have the issue been resolved?
The updates are all for Windows server 2012 R2. What's your Exchange server version? Additionally, please check the following in IIS Manager:
a. In IIS manager > Default Web Site, make sure Anonymous Authentication is Enabled in Authentication.
b. Double-click SSL Settings, confirm that "Require SSL" is checked on the root of the default website.
c. Restart IIS service by running iisreset /noforce from a command prompt window.
If possible, please collect more event logs in Event Viewer for further analysis.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support -
I have a Mid 2011 Macbook Air.
Upgraded to Yosemite last week.
Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
Thanks,
JohnHi!
I have exactly the same problem, and I can't find any solution.
I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
Any suggestion is greatly appreciated! -
Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
[solved] Touchpad scrolling and tapping stops working after Xorg 1.9
Hi all,
My laptop is an Acer Extensa 5630EZ and it has been running for over a year with Arch without problems. However, since the xorg 1.9 upgrade the touchpad edge scrolling just randomly stops working. Everything else continues working fine. I have searched the forums and Googled but haven't found anything that fixes it. Logging out and back into KDE gets the scrolling working again (X restart I guess). I'm pretty much stumped for ideas. Please help!
[edit]
- I edited the title for a more accurate description
- I noticed that tapping also stops working
- Note that it initially works but then randomly stops... as opposed to others' where it does not work at all.
/etc/X11/xorg.conf.d/10-synaptics.conf
$ cat /etc/X11/xorg.conf.d/10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "VertEdgeScroll" "on"
Option "VertTwoFingerScroll" "on"
Option "CornerCoasting" "1"
Option "RBCornerButton" "3"
Option "LTCornerButton" "2"
Option "CoastingSpeed" "0.5"
Option "CoastingFriction" "0"
Option "EmulateTwoFingerMinZ" "40"
Option "EmulateTwoFingerMinW" "5"
EndSection
/etc/X11/xorg.conf.d/10-evdev.conf
$ cat /etc/X11/xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
touchpad part of X log
[ 36091.108] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event5)
[ 36091.108] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 36091.108] (**) PS/2 Mouse: always reports core events
[ 36091.108] (**) PS/2 Mouse: Device: "/dev/input/event5"
[ 36091.120] (--) PS/2 Mouse: Found 3 mouse buttons
[ 36091.120] (--) PS/2 Mouse: Found relative axes
[ 36091.120] (--) PS/2 Mouse: Found x and y relative axes
[ 36091.120] (II) PS/2 Mouse: Configuring as mouse
[ 36091.120] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 36091.120] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 36091.120] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
[ 36091.120] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 36091.120] (**) PS/2 Mouse: (accel) acceleration profile 0
[ 36091.120] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[ 36091.120] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[ 36091.120] (II) PS/2 Mouse: initialized for relative axes.
[ 36091.121] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[ 36091.121] (II) No input driver/identifier specified (ignoring)
[ 36091.121] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[ 36091.121] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 36091.121] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 36091.121] (II) LoadModule: "synaptics"
[ 36091.122] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 36091.130] (II) Module synaptics: vendor="X.Org Foundation"
[ 36091.130] compiled for 1.9.0, module version = 1.3.0
[ 36091.130] Module class: X.Org XInput Driver
[ 36091.130] ABI class: X.Org XInput driver, version 11.0
[ 36091.130] (II) Synaptics touchpad driver version 1.3.0
[ 36091.130] (**) Option "Device" "/dev/input/event6"
[ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 36091.249] (**) Option "EmulateTwoFingerMinZ" "40"
[ 36091.249] (**) Option "EmulateTwoFingerMinW" "5"
[ 36091.249] (**) Option "VertEdgeScroll" "on"
[ 36091.249] (**) Option "CornerCoasting" "1"
[ 36091.250] (**) Option "VertTwoFingerScroll" "on"
[ 36091.250] (**) Option "RBCornerButton" "3"
[ 36091.250] (**) Option "LTCornerButton" "2"
[ 36091.250] (**) Option "TapButton1" "1"
[ 36091.250] (**) Option "TapButton2" "2"
[ 36091.250] (**) Option "TapButton3" "3"
[ 36091.250] (**) Option "CoastingSpeed" "0.5"
[ 36091.250] (**) Option "CoastingFriction" "0"
[ 36091.349] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 36091.349] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 36091.416] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
[ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 36091.459] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 36091.460] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 36091.460] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 36091.460] (II) Synaptics touchpad driver version 1.3.0
[ 36091.856] (EE) AlpsPS/2 ALPS GlidePoint no synaptics event device found
[ 36091.905] (**) Option "Device" "/dev/input/mouse1"
[ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid x-axis range. defaulting to 1615 - 5685
[ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid y-axis range. defaulting to 1729 - 4171
[ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid pressure range. defaulting to 0 - 256
[ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 36091.916] (**) Option "EmulateTwoFingerMinZ" "40"
[ 36091.916] (**) Option "EmulateTwoFingerMinW" "5"
[ 36091.916] (**) Option "VertEdgeScroll" "on"
[ 36091.916] (**) Option "CornerCoasting" "1"
[ 36091.916] (**) Option "VertTwoFingerScroll" "on"
[ 36091.916] (**) Option "RBCornerButton" "3"
[ 36091.916] (**) Option "LTCornerButton" "2"
[ 36091.916] (**) Option "TapButton1" "1"
[ 36091.916] (**) Option "TapButton2" "2"
[ 36091.916] (**) Option "TapButton3" "3"
[ 36091.916] (**) Option "CoastingSpeed" "0.5"
[ 36091.916] (**) Option "CoastingFriction" "0"
[ 36091.937] (EE) Query no Synaptics: 6003C8
[ 36091.937] (--) AlpsPS/2 ALPS GlidePoint: no supported touchpad found
[ 36091.937] (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
[ 36091.979] (EE) PreInit failed for input device "AlpsPS/2 ALPS GlidePoint"
[ 36091.979] (II) UnloadModule: "synaptics"
[ 36101.679] (II) intel(0): EDID vendor "LGD", prod id 502
[ 36101.679] (II) intel(0): Printing DDC gathered Modelines:
[ 36101.679] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 36113.812] (II) intel(0): EDID vendor "LGD", prod id 502
[ 36113.813] (II) intel(0): Printing DDC gathered Modelines:
[ 36113.813] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
Last edited by drsjlazar (2010-10-13 14:46:44)I know about Google's Linux search but I hardly use it... I just add Linux to my search terms. Thanks for the reminder though.
My laptop is an Acer Extensa 5630EZ with an ALPS 'GlidePoint' touchpad.
Searching for problems that seem related to mine does not bring up much. Xorg 1.9 being new is probably the reason. I have gone through the updated installation guide and tried to get everything in order. Some pages recommend HAL, Xorg does not. But without HAL, I have no suspend/hibernate option in KDE and VMWare will not work. The problem appears even if I run DBus only without HAL. So I've decided to to just run HAL.
I have removed all the extra stuff I don't need at startup. Most notable is syndaemon in bashrc (totally forgot I had that). I have to wait for it to stop working since it is unpredictable. Though, I have noticed that it seems to stop working when I use keyboard shortcuts/combinations.
Here is my entire Xorg log after it stopped working:
[ 45238.439]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 45238.439] X Protocol Version 11, Revision 0
[ 45238.439] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 45238.439] Current Operating System: Linux extensa-arch 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 08:45:18 CEST 2010 x86_64
[ 45238.439] Kernel command line: root=/dev/mapper/AllPartitions-ArchRoot ro quiet splash
[ 45238.439] Build Date: 24 August 2010 01:44:37PM
[ 45238.439]
[ 45238.439] Current version of pixman: 0.18.4
[ 45238.439] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 45238.439] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 45238.439] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 7 11:41:07 2010
[ 45238.439] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 45238.439] (==) No Layout section. Using the first Screen section.
[ 45238.439] (==) No screen section available. Using defaults.
[ 45238.439] (**) |-->Screen "Default Screen Section" (0)
[ 45238.439] (**) | |-->Monitor "<default monitor>"
[ 45238.440] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 45238.440] (==) Automatically adding devices
[ 45238.440] (==) Automatically enabling devices
[ 45238.440] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 45238.440] Entry deleted from font path.
[ 45238.440] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 45238.440] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 45238.440] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 45238.440] (II) Loader magic: 0x7d4880
[ 45238.440] (II) Module ABI versions:
[ 45238.440] X.Org ANSI C Emulation: 0.4
[ 45238.440] X.Org Video Driver: 8.0
[ 45238.440] X.Org XInput driver : 11.0
[ 45238.440] X.Org Server Extension : 4.0
[ 45238.441] (--) PCI:*(0:0:2:0) 8086:2a42:1025:013c rev 9, Mem @ 0xf4000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 45238.441] (--) PCI: (0:0:2:1) 8086:2a43:1025:013c rev 9, Mem @ 0xf4400000/1048576
[ 45238.441] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 45238.441] (II) LoadModule: "extmod"
[ 45238.441] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 45238.441] (II) Module extmod: vendor="X.Org Foundation"
[ 45238.441] compiled for 1.9.0, module version = 1.0.0
[ 45238.441] Module class: X.Org Server Extension
[ 45238.441] ABI class: X.Org Server Extension, version 4.0
[ 45238.441] (II) Loading extension MIT-SCREEN-SAVER
[ 45238.441] (II) Loading extension XFree86-VidModeExtension
[ 45238.441] (II) Loading extension XFree86-DGA
[ 45238.441] (II) Loading extension DPMS
[ 45238.441] (II) Loading extension XVideo
[ 45238.441] (II) Loading extension XVideo-MotionCompensation
[ 45238.441] (II) Loading extension X-Resource
[ 45238.441] (II) LoadModule: "dbe"
[ 45238.441] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 45238.441] (II) Module dbe: vendor="X.Org Foundation"
[ 45238.441] compiled for 1.9.0, module version = 1.0.0
[ 45238.442] Module class: X.Org Server Extension
[ 45238.442] ABI class: X.Org Server Extension, version 4.0
[ 45238.442] (II) Loading extension DOUBLE-BUFFER
[ 45238.442] (II) LoadModule: "glx"
[ 45238.442] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 45238.442] (II) Module glx: vendor="X.Org Foundation"
[ 45238.442] compiled for 1.9.0, module version = 1.0.0
[ 45238.442] ABI class: X.Org Server Extension, version 4.0
[ 45238.442] (==) AIGLX enabled
[ 45238.442] (II) Loading extension GLX
[ 45238.442] (II) LoadModule: "record"
[ 45238.442] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 45238.442] (II) Module record: vendor="X.Org Foundation"
[ 45238.442] compiled for 1.9.0, module version = 1.13.0
[ 45238.442] Module class: X.Org Server Extension
[ 45238.442] ABI class: X.Org Server Extension, version 4.0
[ 45238.442] (II) Loading extension RECORD
[ 45238.442] (II) LoadModule: "dri"
[ 45238.442] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 45238.443] (II) Module dri: vendor="X.Org Foundation"
[ 45238.443] compiled for 1.9.0, module version = 1.0.0
[ 45238.443] ABI class: X.Org Server Extension, version 4.0
[ 45238.443] (II) Loading extension XFree86-DRI
[ 45238.443] (II) LoadModule: "dri2"
[ 45238.443] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 45238.443] (II) Module dri2: vendor="X.Org Foundation"
[ 45238.443] compiled for 1.9.0, module version = 1.2.0
[ 45238.443] ABI class: X.Org Server Extension, version 4.0
[ 45238.443] (II) Loading extension DRI2
[ 45238.443] (==) Matched intel as autoconfigured driver 0
[ 45238.443] (==) Matched vesa as autoconfigured driver 1
[ 45238.443] (==) Matched fbdev as autoconfigured driver 2
[ 45238.443] (==) Assigned the driver to the xf86ConfigLayout
[ 45238.443] (II) LoadModule: "intel"
[ 45238.443] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 45238.443] (II) Module intel: vendor="X.Org Foundation"
[ 45238.443] compiled for 1.9.0, module version = 2.12.0
[ 45238.443] Module class: X.Org Video Driver
[ 45238.443] ABI class: X.Org Video Driver, version 8.0
[ 45238.443] (II) LoadModule: "vesa"
[ 45238.443] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 45238.444] (II) Module vesa: vendor="X.Org Foundation"
[ 45238.444] compiled for 1.9.0, module version = 2.3.0
[ 45238.444] Module class: X.Org Video Driver
[ 45238.444] ABI class: X.Org Video Driver, version 8.0
[ 45238.444] (II) LoadModule: "fbdev"
[ 45238.444] (WW) Warning, couldn't open module fbdev
[ 45238.444] (II) UnloadModule: "fbdev"
[ 45238.444] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 45238.444] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 45238.444] (II) VESA: driver for VESA chipsets: vesa
[ 45238.444] (++) using VT number 7
[ 45238.448] (WW) Falling back to old probe method for vesa
[ 45238.450] drmOpenDevice: node name is /dev/dri/card0
[ 45238.450] drmOpenDevice: open result is 8, (OK)
[ 45238.450] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 45238.450] drmOpenDevice: node name is /dev/dri/card0
[ 45238.450] drmOpenDevice: open result is 8, (OK)
[ 45238.450] drmOpenByBusid: drmOpenMinor returns 8
[ 45238.450] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 45238.450] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 45238.450] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 45238.451] (==) intel(0): RGB weight 888
[ 45238.451] (==) intel(0): Default visual is TrueColor
[ 45238.451] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 45238.451] (--) intel(0): Chipset: "GM45"
[ 45238.451] (==) intel(0): video overlay key set to 0x101fe
[ 45238.472] (II) intel(0): Output VGA1 has no monitor section
[ 45238.578] (II) intel(0): Output LVDS1 has no monitor section
[ 45238.578] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 45238.581] (II) intel(0): Output DP1 has no monitor section
[ 45238.599] (II) intel(0): EDID for output VGA1
[ 45238.705] (II) intel(0): EDID for output LVDS1
[ 45238.705] (II) intel(0): Manufacturer: LGD Model: 1f6 Serial#: 0
[ 45238.705] (II) intel(0): Year: 2009 Week: 0
[ 45238.705] (II) intel(0): EDID Version: 1.3
[ 45238.705] (II) intel(0): Digital Display Input
[ 45238.705] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 45238.705] (II) intel(0): Gamma: 2.20
[ 45238.705] (II) intel(0): No DPMS capabilities specified
[ 45238.705] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 45238.705] (II) intel(0): First detailed timing is preferred mode
[ 45238.705] (II) intel(0): redX: 0.603 redY: 0.349 greenX: 0.325 greenY: 0.553
[ 45238.705] (II) intel(0): blueX: 0.157 blueY: 0.144 whiteX: 0.313 whiteY: 0.329
[ 45238.705] (II) intel(0): Manufacturer's mask: 0
[ 45238.705] (II) intel(0): Supported detailed timing:
[ 45238.705] (II) intel(0): clock: 71.0 MHz Image Size: 331 x 207 mm
[ 45238.705] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 45238.705] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 45238.705] (II) intel(0): LG Display
[ 45238.705] (II) intel(0): LP154WX4-TLB5
[ 45238.705] (II) intel(0): EDID (in hex):
[ 45238.706] (II) intel(0): 00ffffffffffff0030e4f60100000000
[ 45238.706] (II) intel(0): 00130103802115780a56759a59538d28
[ 45238.706] (II) intel(0): 24505400000001010101010101010101
[ 45238.706] (II) intel(0): 010101010101bc1b00a0502017303020
[ 45238.706] (II) intel(0): 36004bcf100000190000000000000000
[ 45238.706] (II) intel(0): 00000000000000000000000000fe004c
[ 45238.706] (II) intel(0): 4720446973706c61790a2020000000fe
[ 45238.706] (II) intel(0): 004c503135345758342d544c423500eb
[ 45238.706] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Printing probed modes for output LVDS1
[ 45238.706] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 45238.706] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 45238.706] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 45238.706] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 45238.706] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 45238.707] (II) intel(0): EDID for output DP1
[ 45238.707] (II) intel(0): Output VGA1 disconnected
[ 45238.707] (II) intel(0): Output LVDS1 connected
[ 45238.707] (II) intel(0): Output DP1 disconnected
[ 45238.707] (II) intel(0): Using exact sizes for initial modes
[ 45238.707] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 45238.707] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 45238.707] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 45238.707] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 45238.707] (==) intel(0): DPI set to (96, 96)
[ 45238.707] (II) Loading sub module "fb"
[ 45238.707] (II) LoadModule: "fb"
[ 45238.707] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 45238.707] (II) Module fb: vendor="X.Org Foundation"
[ 45238.707] compiled for 1.9.0, module version = 1.0.0
[ 45238.707] ABI class: X.Org ANSI C Emulation, version 0.4
[ 45238.707] (II) UnloadModule: "vesa"
[ 45238.708] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 45238.708] (==) Depth 24 pixmap format is 32 bpp
[ 45238.708] (II) intel(0): [DRI2] Setup complete
[ 45238.708] (II) intel(0): [DRI2] DRI driver: i965
[ 45238.708] (**) intel(0): Tiling enabled
[ 45238.708] (**) intel(0): SwapBuffers wait enabled
[ 45238.708] (==) intel(0): VideoRam: 262144 KB
[ 45238.708] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 45238.719] (II) UXA(0): Driver registered support for the following operations:
[ 45238.719] (II) solid
[ 45238.719] (II) copy
[ 45238.719] (II) composite (RENDER acceleration)
[ 45238.719] (II) put_image
[ 45238.719] (II) get_image
[ 45238.719] (==) intel(0): Backing store disabled
[ 45238.719] (==) intel(0): Silken mouse enabled
[ 45238.719] (II) intel(0): Initializing HW Cursor
[ 45238.745] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 45238.755] (==) intel(0): DPMS enabled
[ 45238.755] (==) intel(0): Intel XvMC decoder enabled
[ 45238.755] (II) intel(0): Set up textured video
[ 45238.755] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 45238.755] (II) intel(0): direct rendering: DRI2 Enabled
[ 45238.755] (--) RandR disabled
[ 45238.755] (II) Initializing built-in extension Generic Event Extension
[ 45238.755] (II) Initializing built-in extension SHAPE
[ 45238.755] (II) Initializing built-in extension MIT-SHM
[ 45238.755] (II) Initializing built-in extension XInputExtension
[ 45238.755] (II) Initializing built-in extension XTEST
[ 45238.755] (II) Initializing built-in extension BIG-REQUESTS
[ 45238.755] (II) Initializing built-in extension SYNC
[ 45238.755] (II) Initializing built-in extension XKEYBOARD
[ 45238.755] (II) Initializing built-in extension XC-MISC
[ 45238.755] (II) Initializing built-in extension SECURITY
[ 45238.755] (II) Initializing built-in extension XINERAMA
[ 45238.755] (II) Initializing built-in extension XFIXES
[ 45238.755] (II) Initializing built-in extension RENDER
[ 45238.755] (II) Initializing built-in extension RANDR
[ 45238.755] (II) Initializing built-in extension COMPOSITE
[ 45238.755] (II) Initializing built-in extension DAMAGE
[ 45238.767] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 45238.767] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 45238.767] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 45238.767] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 45238.767] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 45238.767] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 45238.767] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 45238.768] (II) intel(0): Setting screen physical size to 338 x 211
[ 45238.886] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 45238.886] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 45238.886] (II) LoadModule: "evdev"
[ 45238.886] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45238.886] (II) Module evdev: vendor="X.Org Foundation"
[ 45238.886] compiled for 1.9.0, module version = 2.5.0
[ 45238.886] Module class: X.Org XInput Driver
[ 45238.886] ABI class: X.Org XInput driver, version 11.0
[ 45238.886] (**) Power Button: always reports core events
[ 45238.886] (**) Power Button: Device: "/dev/input/event2"
[ 45238.899] (--) Power Button: Found keys
[ 45238.899] (II) Power Button: Configuring as keyboard
[ 45238.899] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 45238.899] (**) Option "xkb_rules" "evdev"
[ 45238.899] (**) Option "xkb_model" "evdev"
[ 45238.899] (**) Option "xkb_layout" "us"
[ 45238.934] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 45238.934] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 45238.934] (**) Video Bus: always reports core events
[ 45238.934] (**) Video Bus: Device: "/dev/input/event4"
[ 45238.943] (--) Video Bus: Found keys
[ 45238.943] (II) Video Bus: Configuring as keyboard
[ 45238.943] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 45238.943] (**) Option "xkb_rules" "evdev"
[ 45238.943] (**) Option "xkb_model" "evdev"
[ 45238.943] (**) Option "xkb_layout" "us"
[ 45238.945] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 45238.945] (II) No input driver/identifier specified (ignoring)
[ 45238.946] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 45238.946] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 45238.946] (**) Sleep Button: always reports core events
[ 45238.946] (**) Sleep Button: Device: "/dev/input/event1"
[ 45238.953] (--) Sleep Button: Found keys
[ 45238.953] (II) Sleep Button: Configuring as keyboard
[ 45238.953] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 45238.953] (**) Option "xkb_rules" "evdev"
[ 45238.953] (**) Option "xkb_model" "evdev"
[ 45238.953] (**) Option "xkb_layout" "us"
[ 45238.956] (II) config/udev: Adding input device Acer Crystal Eye webcam (/dev/input/event7)
[ 45238.956] (**) Acer Crystal Eye webcam: Applying InputClass "evdev keyboard catchall"
[ 45238.956] (**) Acer Crystal Eye webcam: always reports core events
[ 45238.956] (**) Acer Crystal Eye webcam: Device: "/dev/input/event7"
[ 45238.963] (--) Acer Crystal Eye webcam: Found keys
[ 45238.963] (II) Acer Crystal Eye webcam: Configuring as keyboard
[ 45238.963] (II) XINPUT: Adding extended input device "Acer Crystal Eye webcam" (type: KEYBOARD)
[ 45238.963] (**) Option "xkb_rules" "evdev"
[ 45238.963] (**) Option "xkb_model" "evdev"
[ 45238.963] (**) Option "xkb_layout" "us"
[ 45238.963] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 45238.964] (II) No input driver/identifier specified (ignoring)
[ 45238.971] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 45238.971] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 45238.971] (**) AT Translated Set 2 keyboard: always reports core events
[ 45238.972] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 45238.979] (--) AT Translated Set 2 keyboard: Found keys
[ 45238.979] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 45238.979] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 45238.979] (**) Option "xkb_rules" "evdev"
[ 45238.979] (**) Option "xkb_model" "evdev"
[ 45238.979] (**) Option "xkb_layout" "us"
[ 45238.980] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event5)
[ 45238.980] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 45238.980] (**) PS/2 Mouse: always reports core events
[ 45238.980] (**) PS/2 Mouse: Device: "/dev/input/event5"
[ 45238.993] (--) PS/2 Mouse: Found 3 mouse buttons
[ 45238.993] (--) PS/2 Mouse: Found relative axes
[ 45238.993] (--) PS/2 Mouse: Found x and y relative axes
[ 45238.993] (II) PS/2 Mouse: Configuring as mouse
[ 45238.993] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 45238.993] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 45238.993] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
[ 45238.993] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 45238.993] (**) PS/2 Mouse: (accel) acceleration profile 0
[ 45238.993] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[ 45238.993] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[ 45238.993] (II) PS/2 Mouse: initialized for relative axes.
[ 45238.993] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[ 45238.993] (II) No input driver/identifier specified (ignoring)
[ 45238.994] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[ 45238.994] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 45238.994] (II) LoadModule: "synaptics"
[ 45238.994] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 45238.994] (II) Module synaptics: vendor="X.Org Foundation"
[ 45238.994] compiled for 1.9.0, module version = 1.3.0
[ 45238.994] Module class: X.Org XInput Driver
[ 45238.994] ABI class: X.Org XInput driver, version 11.0
[ 45238.994] (II) Synaptics touchpad driver version 1.3.0
[ 45238.995] (**) Option "Device" "/dev/input/event6"
[ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 45239.033] (**) Option "EmulateTwoFingerMinZ" "40"
[ 45239.033] (**) Option "EmulateTwoFingerMinW" "5"
[ 45239.033] (**) Option "VertEdgeScroll" "on"
[ 45239.033] (**) Option "CornerCoasting" "1"
[ 45239.033] (**) Option "VertTwoFingerScroll" "on"
[ 45239.033] (**) Option "RBCornerButton" "3"
[ 45239.033] (**) Option "LTCornerButton" "2"
[ 45239.033] (**) Option "TapButton1" "1"
[ 45239.033] (**) Option "TapButton2" "2"
[ 45239.033] (**) Option "TapButton3" "3"
[ 45239.033] (**) Option "CoastingSpeed" "0.5"
[ 45239.033] (**) Option "CoastingFriction" "0"
[ 45239.059] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 45239.059] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 45239.073] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
[ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 45239.099] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 45239.100] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 45239.100] (II) No input driver/identifier specified (ignoring)
[ 45242.575] (II) intel(0): EDID vendor "LGD", prod id 502
[ 45242.575] (II) intel(0): Printing DDC gathered Modelines:
[ 45242.575] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 45243.125] (II) intel(0): EDID vendor "LGD", prod id 502
[ 45243.125] (II) intel(0): Printing DDC gathered Modelines:
[ 45243.125] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 45245.428] (II) intel(0): EDID vendor "LGD", prod id 502
[ 45245.428] (II) intel(0): Printing DDC gathered Modelines:
[ 45245.428] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 45248.639] (II) intel(0): EDID vendor "LGD", prod id 502
[ 45248.639] (II) intel(0): Printing DDC gathered Modelines:
[ 45248.639] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 70602.586] (II) intel(0): EDID vendor "LGD", prod id 502
[ 70602.586] (II) intel(0): Printing DDC gathered Modelines:
[ 70602.586] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 70602.803] (II) intel(0): EDID vendor "LGD", prod id 502
[ 70602.803] (II) intel(0): Printing DDC gathered Modelines:
[ 70602.803] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 70603.146] (II) intel(0): EDID vendor "LGD", prod id 502
[ 70603.146] (II) intel(0): Printing DDC gathered Modelines:
[ 70603.146] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 70603.358] (II) intel(0): EDID vendor "LGD", prod id 502
[ 70603.358] (II) intel(0): Printing DDC gathered Modelines:
[ 70603.359] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 70603.518] (II) intel(0): EDID vendor "LGD", prod id 502
[ 70603.518] (II) intel(0): Printing DDC gathered Modelines:
[ 70603.518] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 70603.662] (II) intel(0): EDID vendor "LGD", prod id 502
[ 70603.662] (II) intel(0): Printing DDC gathered Modelines:
[ 70603.662] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 90776.420] (II) intel(0): EDID vendor "LGD", prod id 502
[ 90776.420] (II) intel(0): Printing DDC gathered Modelines:
[ 90776.420] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122487.594] (II) intel(0): EDID vendor "LGD", prod id 502
[122487.594] (II) intel(0): Printing DDC gathered Modelines:
[122487.594] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122488.139] (II) intel(0): EDID vendor "LGD", prod id 502
[122488.139] (II) intel(0): Printing DDC gathered Modelines:
[122488.139] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122488.784] (II) intel(0): EDID vendor "LGD", prod id 502
[122488.784] (II) intel(0): Printing DDC gathered Modelines:
[122488.784] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122488.980] (II) intel(0): EDID vendor "LGD", prod id 502
[122488.980] (II) intel(0): Printing DDC gathered Modelines:
[122488.980] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122489.174] (II) intel(0): EDID vendor "LGD", prod id 502
[122489.174] (II) intel(0): Printing DDC gathered Modelines:
[122489.174] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122489.321] (II) intel(0): EDID vendor "LGD", prod id 502
[122489.321] (II) intel(0): Printing DDC gathered Modelines:
[122489.321] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122489.470] (II) intel(0): EDID vendor "LGD", prod id 502
[122489.470] (II) intel(0): Printing DDC gathered Modelines:
[122489.470] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122489.617] (II) intel(0): EDID vendor "LGD", prod id 502
[122489.617] (II) intel(0): Printing DDC gathered Modelines:
[122489.617] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122489.756] (II) intel(0): EDID vendor "LGD", prod id 502
[122489.756] (II) intel(0): Printing DDC gathered Modelines:
[122489.756] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122489.903] (II) intel(0): EDID vendor "LGD", prod id 502
[122489.904] (II) intel(0): Printing DDC gathered Modelines:
[122489.904] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122490.054] (II) intel(0): EDID vendor "LGD", prod id 502
[122490.054] (II) intel(0): Printing DDC gathered Modelines:
[122490.054] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165444.489] (II) intel(0): EDID vendor "LGD", prod id 502
[165444.519] (II) intel(0): Printing DDC gathered Modelines:
[165444.519] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165445.260] (II) intel(0): EDID vendor "LGD", prod id 502
[165445.260] (II) intel(0): Printing DDC gathered Modelines:
[165445.261] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165445.519] (II) intel(0): EDID vendor "LGD", prod id 502
[165445.519] (II) intel(0): Printing DDC gathered Modelines:
[165445.519] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165445.682] (II) intel(0): EDID vendor "LGD", prod id 502
[165445.682] (II) intel(0): Printing DDC gathered Modelines:
[165445.682] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165445.827] (II) intel(0): EDID vendor "LGD", prod id 502
[165445.827] (II) intel(0): Printing DDC gathered Modelines:
[165445.827] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165446.027] (II) intel(0): EDID vendor "LGD", prod id 502
[165446.027] (II) intel(0): Printing DDC gathered Modelines:
[165446.027] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165446.234] (II) intel(0): EDID vendor "LGD", prod id 502
[165446.234] (II) intel(0): Printing DDC gathered Modelines:
[165446.234] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165446.409] (II) intel(0): EDID vendor "LGD", prod id 502
[165446.409] (II) intel(0): Printing DDC gathered Modelines:
[165446.409] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165446.638] (II) intel(0): EDID vendor "LGD", prod id 502
[165446.639] (II) intel(0): Printing DDC gathered Modelines:
[165446.639] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165446.798] (II) intel(0): EDID vendor "LGD", prod id 502
[165446.798] (II) intel(0): Printing DDC gathered Modelines:
[165446.798] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165447.035] (II) intel(0): EDID vendor "LGD", prod id 502
[165447.035] (II) intel(0): Printing DDC gathered Modelines:
[165447.035] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165447.227] (II) intel(0): EDID vendor "LGD", prod id 502
[165447.227] (II) intel(0): Printing DDC gathered Modelines:
[165447.227] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165450.227] (II) intel(0): EDID vendor "LGD", prod id 502
[165450.227] (II) intel(0): Printing DDC gathered Modelines:
[165450.227] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[edit] I haven't had any problems the since I disabled all the extra stuff. I don't feel like finding the exact cause since I think it was specific to my own setup... though I suspect syndaemon. I'll go ahead and mark this as solved... again. Thanks for the help.
Last edited by drsjlazar (2010-10-13 14:44:37) -
Windows 8.1 Onboard Keyboard and Touchpad Stopped Working.
After upgrading to Win 8.1 my keyboard and touchpad stopped working suddenly. They both worked fine for the entire Windows 8.0 release. When I upgraded to 8.1, they both worked for about 3 months. Then what started happening is the computer
would freeze during the startup process.
Now they both don't don't work. But a USB powered mouse works. So with a USB powered mouse and the on screen keyboard I have been troubleshooting. I have removed the drivers from the device manager, reinstalled the drivers, searched for
driver updates etc. Nothing works.
Can someone please point me in the right direction. PC is kind of useless at the moment.Hi,
Kindly check this application that can show incompatible/unwanted/untrusted/ applications then remove these with different kinds of PC cleaner/Application removal tools.
http://www.getsysteminfo.com/
After Downloaded, Run the Application and Save Report, Upload the Report and Press Submit Button and Click Read the report as an Expert.
If you found anything in these 2 Auto analyses
then find the solution.
1) Driver To Update:
2) Application to Update:
Good Luck! -
Bookmark bar and menu stop working after awhile on Firefox 12
I have upgraded to Firefox 12. Everything works fine when I start up Firefox, but after some amount of use (and I can't always reproduce this) eventually when I click on bookmarks in my Bookmark Bar or from the Bookmark menu, nothing happens. Firefox doesn't load the bookmark. If I open the "Show All Bookmarks" window and click on bookmarks there, they load fine and then the menu and bookmark bar suddenly start working again. If I close the "Show All Bookmarks" window the Bookmark Bar and menu stop working again.
Hi ischou,
I haven't heard of this particular issue, but you might want to try starting Firefox in [[Safe Mode]]. Let is sit for a while as you described above and if you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
You could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile Creating a new profile].
Hopefully this helps! -
Apple wireless mouse and keyboard stop working ... now says OS X version and bluetooth incompatible
For no apparent reason my apple wireless mouse and keyboard stopped working. I was not upgrading or installing anything, the batteries are good, nothing was changed as far as I know. Now bluetooth discovers the paired devices, connects for about 30 seconds, the disconnects ... or stays connected but doesn't work.
What's happenned ... I'm rushing to finish a big job ... any ideas? I've tried re-pairing but doesn't work ... says that OSX version may be incompatible with device bluetooth ... I'm using Lion so maybe there is another lion problem?Hello:
Barry: What do you mean with "making devices favorites"?
This is the method:
Go to system preferences>bluetooth. Highlight an item in the sidebar. If detailed information does not appear, click on the little gear and select show more info. Then click on the gear again and select favorite.
And how could an hardware-related problem be (temporarily) solved rebooting the OS?
Intermittent problems are, IMHO, most often caused by hardware. Restarting will occasionally "fix" problems - why, I do not know.
Barry -
Exchange SP2 makes OWA and Activesync stop working
Software:
Windows 2003 Server
Exchange 2003 SP2
Activesync
Symantec antivirus
I have just updated to servicepack 2 on exchange 2003. The reason why I did so, was that the SP2 had many fixes to bugs that has been annoying and needed to be installed on our system. The upgrade went perfectly, until an hour after the upgrade. Then Activesync and OWA stopped working. I got the error that the Hotfix 259867 should fix, after abot 1 hour in the telephone I got the hotfix sent over. This removed the error message. But there came a new error message (or several if you want).
The OWA works for a half hour, when restarting the services, then it crashes again, same stuff with activesync.
I really need some help here, anyone got a clue?
Following error message stille appears in the eventvwr.
Under System:
Event Type: Warning
Event Source: W3SVC
Event Category: None
Event ID: 1011
Date: 03.08.2006
Time: 15:55:17
User: N/A
Computer: NOREXCH
Description:
A process serving application pool 'ExchangeApplicationPool' suffered a fatal communication error with the World Wide Web Publishing Service. The process id was '4844'. The data field contains the error number.
Event Type: Error
Event Source: W3SVC
Event Category: None
Event ID: 1002
Date: 03.08.2006
Time: 15:55:17
User: N/A
Computer: NOREXCH
Description:
Application pool 'ExchangeApplicationPool' is being automatically disabled due to a series of failures in the process(es) serving that application pool.
Application:
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 03.08.2006
Time: 15:55:12
User: N/A
Computer: NOREXCH
Description:
Faulting application w3wp.exe, version 6.0.3790.1830, faulting module msvcrt.dll, version 7.0.3790.1830, fault address 0x00038e24.I THINK I found a fix!
First to answer the question about log entries... None, that's one of the things thats made this so difficult to trace down.
Now onto what fixed the issue for me. The client has approx 1250 users on a single quad proc box. The majority of the users (approx 1,000) access the server via OWA the other 250 access it using RPC over HTTPs. I wanted to see if RPC over HTTPs was causing the issue so I disabled access to the virtual directory. After doing that OWA was accessible for more than 30 minutes.
In my quest to find the fix for this problem I saw a post that someone renamed the rpcpoxy.dll file and it got recreated so i followed suite. After stopping the site, renaming the file, enabling access to the rpc virtual and starting the stie ALL services have been available for more than 1 hour without issue.
After looking into the rpcproxy.dll file I see that it was updated with SP2 server update.
If things change I will post back but for now things are looking good considering it had gotten so bad over the past few days that OWA was accessible for less than 2 minutes after an iisreset. -
Hi Team,
Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
Regards
Sahil bhatejaHi，
So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers.
if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
Yolanda Zhu
TechNet Community Support -
Maxbook air keyboard, trackpad and usb stop working
Hi everyone! i have a macbook air (early 2008) and it stop working the keyboard, the trackpad, and the usb port i think the bluetooth too becouse when i checked the hardware it doesn't appear i think is something wrong with the software becouse the ilumination of the keyboard still works but i can't use the restore disks becouse i don't have keyboard so i can't choose the start disk, any ideas what can it be? someone experience the same problem? Thanks
It's a common problem. I'm not aware of a fix yet.
-
Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.
ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."
Maybe you are looking for
-
Color wheel showing again with mail & other applications
Please note I am a MAC user and not anything close to an "experienced" user - I can do what I need to on my MAC. Any help/suggestions appreciated. From another post I gathered I should check my console at the exact time the "wheel" showed up and cop
-
Can you help me to retrieve my applications. In iTunes I accidentally clicked the Restore button in the Summary screen. It restored the original settings and I lost all my applications and don't know if it is possible to retrieve them.
-
Is there a good way to add a large music file to itunes match without itunes crashing?
I have several large music files that are DJ sessions and anywhere from 1-3 hours long. I deleted them from itunes while matching because they were causing match to crash at step 3 every time. I would like to add these files into match now but every
-
Hi All...... Please can anyone explain the sequence of steps how the Accounts are credited and debited when the GR & the IR is Posted. Can anyone also say me in what way the Debit and Credit Concepts has be looked on( When Inventory its different fro
-
Doubts - PCP/PCPS - Personnel Cost Planning and Simulation
Hi gurus, How are you? I hope you are very well. Currently I'm working in PCP and Simulation implementation project. Actually, in our case, the client is using the old component PCP and would like to implementing the new one. Basically, we have the f