Upgraded to 10.7.4 (on a 2x2.8 GHz Quad-Core) and neither video nor YouTube work any longer. HELP! (please)

If ANYONE knows how to overcome these no-video issues (caused by the upgrade) I'd sure appreciate it! THANK YOU!

OK it works fine jear in 10.7.4, so a few things to try...
First try with this:
1) Right-click (or control-click) on the *Safari* icon in Dock
2) Options - Show in Finder
3) Right-click on Safari
4) Choose "get info" from the contextual menu.
5) Select "open in 32-bit" in Get Info, and then close the pane.
6) Re-launch Safari.
If that's not working, try this:
1. Load a page with an embedded flash video (e.g. any load youtube video)
2. Right-click within the video frame and choose "Settings..."
3. In the pop-up box, in the first tab under "Display", tick the checkbox to "Enable hardware acceleration"
4. Close the configuration box.
5. Reload the page
http://www.osx86.net/10-6-snow-leopard/12600-how-fix-black-screen-video-playback -yoube.html
Also...
http://forums.macrumors.com/showthread.php?t=1098606
http://answers.yahoo.com/question/index?qid=20100224052540AAaD7An

Similar Messages

Premiere does not play well on MacPro 2x2.8 Ghz Quad Core and 10.10.1

We've been having problems with Premiere Pro CC v8.1 Caravan on our MacPro 2x2.8 Ghz Quad Core running 10.10.1. We get hard crashes, etc. Disk Warrior finds two Adobe related rsrc files damaged:
File: "Localized.rsrc"
Detected that the resource header is damaged and cannot be repaired
Location: "Macintosh HD/Applications/Utilities/Adobe Creative Cloud/Utils/AdobeAAMDetect.plugin/Contents/ Resources/English.lproj/"
File: "Localized.rsrc"
Detected that the resource header is damaged and cannot be repaired
Location: "Macintosh HD/Library/Internet Plug-Ins/AdobeAAMDetect.plugin/Contents/Resources/English.lproj/"
Might these be related to the hard crashes? Should we delete them, and if so, how should we delete them? What else should we try?
Many thanks

Well, I switched to Chrome and never looked back!

HT6114 I am unable to attach audio and vido files using mail after I upgraded to mavericks. 10.9.2 2x2.4 Ghz qyad core intel Xeon

Has anyone found a solution for attaching video and audio files in mail with Mavericks. It works fine on my macbook pro but does not work on my desktop. I get the spinning wheel of death. It worked fine before I upgraded to Mavericks.
2x2.4 HGz Quad core Intel Xeon, 12GB 1066 Mhz DDR3.
Thanks
Tom

Has anyone found a solution for attaching video and audio files in mail with Mavericks. It works fine on my macbook pro but does not work on my desktop. I get the spinning wheel of death. It worked fine before I upgraded to Mavericks.
2x2.4 HGz Quad core Intel Xeon, 12GB 1066 Mhz DDR3.
Thanks
Tom

Problem with mac pro 2x2.93 GHZ Dual Core and Mini Display Port

Finally I see the button to create new post!
I would like to explain a problem I have with my mac pro 2x2.93 GHZ Dual Core Intel Xeon processors and the ATI Radeon HD 4870.
I have two 30 "Apple. After buying the new Mac Pro is one of the two monitors, only with the monitor all black, small horizontal lines.
This happens only to the monitor connected to the mini display port... So if you reverse it monitors the problem always moves on the board connected to the Mini Display Port.
Apple has already changed my video card and the adapter but the problem is still there.
Someone can tell me if it is the ATI Radeon HD 4870 that has problems to have two monitors 30 "? Or it could be that the mini display port that is hard to read the two monitors and when the background is black (RGB-255-255-255) makes these lines?
Through the Apple store I then bought a new card (EVGA GeForce GTX 285 "). Unfortunately, after three weeks of waiting is not yet arrived. Proof that I want to do before returning to telephone assistance is whether on a card that has two dual-link DVI ports normal all goes well.
Sorry for the repetition of messages, but my English is very bad. This is the first time I connect to this site support
Mario
Message was edited by: marioart

In any case, this system does not support two 30".
I honestly don't think the 4870 with that adapter can support two 30". Just using the adapter itself would not give me the normal resolutions on my 30, where as the DVI port did. Luckily for me the adapter worked fine on my 20".
Truly I don't know why Apple would sell a card and not say just what displays it can power.
So I worked around my problem fine but I chose to get the 285 also. My question to you though is, did Apple make you pay for it? Was it part of a deal with them because the Radeon didn't work? You might want to talk to them about that. That is one expensive card.

How do I set up dual 30" cinema displays on a 2x2.4 GHz Quad Core Intel Xeon Mac?

I have this amazing apple mac pro. However, I also have two amazing fully functional 30" cinema hd displays. for some reason, when I have both displays mounted to the mac pro, one display is at the entirely wrong display setting (too large) and the other is set perfectly. Is there something I should know about when setting up? I've gone through all the configs within prefences>displays as well. even switched ports on the tower to check that it wasn't the display and it's the same. seems to be what the card is sending out the two ports. one port is dvi the other is mini. any help would be greatly appreciated as I'm trying to utilize two monitor set up in fcp.
Thanks,
Mark

To get full resolution on a 30" display from a Mini DisplayPort, you need a DUAL-LINK DVI adapter.
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>

I just upgraded from Express to Pro. When I open a project in Finder and neither Express nor Pro are running, it always opens in Express. "Open With ..." says Express is the default. How can I make Pro the default instead?

I just upgraded from Logic Express to Pro. When I open a project in Finder and neither Express nor Pro are running, it always opens in Express. I now want projects to open in Pro. "Open With ..." says Express is the default. How can I make Pro the default instead?

Well, when I've done things like that it always sems like a good idea to keep an application that you know the file will definitely open in...

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader inorder for the previewer to work.

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
Can anyone recommend a solution?

If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
My Acrobat version is 11.0.10
I am running Windows 7 Professional with Service Pack 1
My Internet Explorer is Version 11.0.9600.17691
Update Versions 11.0.17 (KB3032359)
I am running Microsoft Office 2013

Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!

Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!
Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist. Verify that you have access to that directory.

Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist. Verify that you have access to that directory.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Vista instructions in the following document: Check your hard disk for errors
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

HT4972 Hi I am trying to upgrade my iPhone Model#A1303 to iOS6 through iTunes. The iOS is upgraded but activation is pending. Says activating serveris temporarily unavailable repeatedly and i am unable to use my phone. Please help to upgrade or restore.

Hi I am trying to upgrade my iPhone Model#A1303 to iOS6 through iTunes. The iOS is upgraded but activation is pending. Says activating serveris temporarily unavailable repeatedly and i am unable to use my phone. Please help to upgrade or restore.

That's usully symptomatic of a phone that was jailbroken or hacked to unlock it.

Upgrading RAM for an iMAC Intel Core i5 2.8 GHz Quad Core - Late 2012 (I'm guessing).

I have an iMAC Intel Core i5 2.8 GHz Quad Core - Late 2012 (I'm guessing). I am trying to upgrade the RAM of my iMAC and I am not sure how to go about it. Running on OSx 10.6.3
This iMac has 4 slots - Currently my RAM is using 2 slots with 4 GB so I have 8 GB right now.
The speed is 1333MHz. Now I have some RAM that could get to 32GB but the 4 RAM chips speed is
1866 MHz.
Would it be possible to swap my old RAM (8GB) 1333MHz for the new 1866mhz RAM? even with the difference in speed? The RAM is from Crucial.
If possible I can try and swap the RAM if I get inside my iMAC.

If you are really running 10.6.3, then you do not have a 2012 machine. Please check to see if this is yours (it's a 2010):
http://www.everymac.com/systems/apple/imac/specs/imac-core-i5-2.8-27-inch-alumin um-mid-2010-specs.html
It also mentions the exact specs of the RAM. I would only use the RAM supported by Apple; using the higher speed rated RAM will not result in higher speed.

I upgraded to iOS5 and neither camera nor notification center can be accessed when phone is locked

I upgraded to iOS5 and neither camera nor notification center can be accessed when phone is locked

iPhone User Guide (For iOS 5.0 Software)
Read the manual.
Double tap the home button.

N100 SODIMM upgrade from 1GB to 2GB ... not working as expected, help please

I have recently bought some RAM modules for my N100 3000 series laptop which was originally bought around 1.5 years ago. The original modules that came with the laptop were 512MB x2. I am upgrading to 1GB x2 modules.
I ordered them from Ebuyer.com and they were Kingston modules, who declare on their website and on the packaging that the modules are compatible with the laptop. After installation and attempting various configurations, the overall outcome is that slot A accepts new RAM (both modules work in this slot), slot B doesn't accept new RAM (but does accept the original RAM), and all RAM modules work without errors.
Would you know what either I am doing wrong when installing the new RAM, or if there is a configuration setup I need to do to be able to install the new RAM in the BIOS?
Thank you in advance for any advice given.

Now you're talking about the internal bits that make Excel
behave the way it does. There is an entire section in MSDN (
http://msdn.microsoft.com)
devoted to Office XML, which is what you'd have to use to serve up
a fully-functioning XLS file.
You can find an example on this site. The Google Groups
address is
http://groups.google.com/group/macromedia.coldfusion.advanced_techniques/browse_thread/thr ead/71abd01da20e186a/f192971168deae79?lnk=st&q=CFCONTENT+Excel+cell+format&rnum=2&hl=en#f1 92971168deae79
Have fun!

I recently upgraded to the OS X Mavericks, and Excel doesn't work any longer. Suggestions on the version I should buy to install? Office??

I recenly upgraded to OS X Mav operating system and Microsoft applications I had are no longer supported. What Office package is best for this new operating system

Try LibreOffice. It is free.

Running windows 7 64bit. since upgrading to newer versions of itunes,display is not right. window controls and side scroll are cut off. any ideas please.

i'm running Win 7 64 bit. since upgrading to newer versions of itunes,the display is wrong. window controls and side scroll bar are cut off. any help will be appreciated. I've set itunes compatibility setting to Win 7.

Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

I have upgraded to 10.10.3 on my MacBook Pro now the Calendar is not working properly. Help please?!?

Yesterday I upgraded my MacBook Pro 13" (Early 2013) to 10.10.3. I immediately started having problems with it opening apps slowly. So I read and discovered it had replaced some of my apps with newer versions. I also restarted it 2 or 3 times. That seemed to solve that problem. This morning I get on and it is doing the same thing, but it is limited to the Calendar. Anything I try to do in the Calendar gets me the spinning beachball, from opening it to editing to adding an event. I have many dates and events saved that I don't want to lose. Am I going to have to reinstall the Calendar? If so, how can I do it without losing my content?

This is the note I sent to the other thread (Macbook is slow since OS X 10.10.3. I'm sorry. I hope this helps
I did not have a specific category that said "log list" once I got to "All Messages". It just showed "Log" so that is what I am sending you. The other thing is that the timestamp is 9:23:?? the next is 9:34:?? and the problem occurred at 9:32:??. So you are getting the log from 9:23 until it repeats.
Apr 13 09:23:49 -MBP com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Apr 13 09:34:43 -MBP hidd[96]: IOHIDEventQueue unable to get policy for event of type 11. (e00002e8)
Apr 13 09:34:47 --- last message repeated 83 times ---
Apr 13 09:34:47 -MBP spindump[1465]: Got xpc error message in libspindump client connection: Connection invalid
Apr 13 09:37:56 -MBP apsd[73]: Failed to initialize budgeting, not using budgeting: Error Domain=Timed out waiting for XPC and/or reply handler Code=104 "The operation couldnâ€™t be completed. (Timed out waiting for XPC and/or reply handler error 104.)"
Apr 13 09:37:56 -MBP apsd[73]: apsd(73,0x7fff7a8d5300) malloc: *** error for object 0x7fd5e0c43ef0: pointer being freed was not allocated
*** set a breakpoint in malloc_error_break to debug
Apr 13 09:38:29 -MBP com.apple.xpc.launchd[1] (com.apple.Finder[221]): Service exited due to signal: Terminated: 15
Apr 13 09:38:29 -MBP kernel[0]: process Messages[57790] caught causing excessive wakeups. Observed wakeups rate (per sec): 115; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45001
Apr 13 09:38:29 -MBP com.apple.xpc.launchd[1] (com.apple.ReportCrash[57808]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash
Apr 13 09:38:29 -MBP ReportCrash[57808]: Invoking spindump for pid=57790 wakeups_rate=115 duration=392 because of excessive wakeups
Apr 13 09:38:29 -MBP com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Apr 13 09:38:29 --- last message repeated 1 time ---
Thank you for your times!

Upgraded to 10.7.4 (on a 2x2.8 GHz Quad-Core) and neither video nor YouTube work any longer. HELP! (please)

Similar Messages

Maybe you are looking for