Upgraded to 10.8.1 - Won't Boot - Black Screen

I upgraded to 10.8.1 and restarted. The laptop screen never flickers, activates, or appears to turn on at all.
All peripherals have been disconnected. Powering off and on multiple times has no effect. Removing (and replacing) the battery has no effect. Attempting to hold Option or Shift or Command-Option-P-R have no effect.

Ok, this is weird. I came back from church after leaving the laptop completely off and disconnected the entire time. It just booted up as if nothing happened.
Any ideas as to why? I did note to myself when I shut it off before departure that it was running hot, but I didn't think the temperature was too far out of normal.

Similar Messages

  • 27" iMac Mountain Lion won't boot (Black screen) after switching to bootcamp

    Hi,
    I've been running Windows 7 in Boot Camp on Mountain Lion on my 1 month old 27" iMac without any problems. Tonight after I switched the startup partition to be boot camp the machine won't boot. I get the startup sound and the disks spin up, but the system just sits there with a Black Screen. There is no disk activity other than them spinning up.
    I've tried starting the machine while holding the option key and also command-r, but nothing is happening. I have the feeling that the bluetooth keyboard has not had the chance to connect to the system before it is hanging.
    I tried inserting a Lion OS DVD, thinking that it would at least complain and give me an option to boot back in to Mountain Lion. You can hear the DVD spin up and then go idle.
    Any suggestions on how I can recover the situation?
    Thanks in advance
    Mick

    The RAM mismatch might be the problem fix that.
    Also backup/data recover naturally, assume TimeMacine or bootable clone is corrupted and backup only files to a storage drive
    Most commonly used backup methods
    Install OS X on a external drive and boot from it.
    Create a data recovery/undelete external boot drive
    Use Disk Utility on the booted clone to Erase with middle selection (Zero) the ENTIRE internal hard drive
    Use Carbon Copy Cloner to reverse clone the clone onto the internal, copies the Recovery HD too.
    That should fix it, or else the drive or another hardware issue
    ..Step by Step to fix your Mac
    Install/upgrade RAM or storage drive in Mac's

  • Laptop won't boot; Black screen w/moveable cursor

    Satellite A305-S6905
    Current Situation:  Laptop won’t boot-up; black screen with moveable mouse cursor, HHD indicator actively flashing.
    I was attempting to upgrade from Vista to Win7-32bit-Ultimate.  Kept receiving error messages regarding non-compatible files.  Next the computer would not recognize the Multi-Drive (did not appear on the My Computer screen.  Now all I get is the black screen.  How can I restore?

    BTW, to reboot this PC (Windows 7), all you need to do is pres ctr+alt+delete at the black screen, and it will do just that. But if you disconnected all usb drives, then you cannot use this shortcut. You need to just shut it down with the power button.

  • Won't boot/black screen

    My MacBook Pro turned itself off and won't boot up now.  Could it have overheated?

    Mac will shut down itself when it is overheated to protect itself from damage.
    But in this case it is better to take the Mac to the Apple Store for checking.
    Best.

  • Macbook won't boot, black screen, no chime

    My macbook won't boot at all.  It is a white non unibody one.  When you press the power button the screen breifly blinks and a clicking sound is heard but no other sounds or chime or anything.  I'm suspecting the worst but thought i'd submit it on here first.  Any help is appreciated.  Thanks.

    Thanks for the reply but it isn't a hard drive issue.  I have tested the hard drive in an external enclosure and it's working fine.  I even put in another hard drive i have and it wont boot that either.  I'm thinking its a logic board issue.  Any one know best place to get logic board replacement near london for cheap

  • G5 won't boot - black screen

    my g5 2x1,8ghz (late 2004, pci) running on 10.5.4 recently freezed during work. after forced shutdown with power button, the g5 refused to boot. if i press the power button, i get the chime sound, the fans are spinning up and the power led is on, but i get a black screen. the fans are ramping up and i have to force shutdown again. every 1 of 15 times trying to startup the machine will boot. i have to crt monitors connected via vga to a radeon9600xt agp and a radeon 7000 pci card. both monitors show a black screen. if the system boots, it can boot from internal hd, apple hardware test cd, or leopard installer dvd. after running for 15-20min. the system freezes again and i have to force shutdown. while running, the fans operate in normal speed and temp sensors show no overheating!
    what i have done so far for troobleshooting:
    - reset pmu on logicboard
    - changed pram battery
    - reseated hd, pci and agp cards, ram modules, changed position and amount of ram modules
    - the crt monitors and cables are fine
    - from time to time i can boot in open firmware or target mode
    - apple hardware test shows no error messages
    - if system boots in os x, both processors and ram modules show up correct in system profiler
    - even if i disconnect the internal hd's, i get a black screen ... and sometimes the grey screen with missing startup folder
    any ideas?
    kind regards
    ole

    Hi. My G5 quad started with the same problem yesterday. The keyboard doesn't work either can't reset the pram or boot from the leopard DVD. I tried everything I could think of removed and reseated everything, tried with just the factory ram, tried just the OWC ram, reset the PMU. Called support today. Tried everything he said. No luck. He set up an appointment for me at the store tomorrow. Fortunately I have 10 months left on my AppleCare. I'll let you know what I find out. Mine started with the screen going to diagonalred lines and the sound started looping. My kid was playing Rainbow 6. When he rebboted, got chime but black screen then the fans went into turbo mode.

  • Imac g4 won't boot; black screen

    Hi,
    I have a question about a friend's imac g4 (1.25 gz). When I press the power button I can hear the startup chime, but the screen stays black. At first I thought it was the display, so I started up in target disk mode; however, the hard drive would only show up in disk utility on the host computer. When I tried to verify and repair the disk I got an error. Here is a screen shot of what it said.
    http://img812.imageshack.us/i/diskerror.png/
    Was this error because disk utility said the hard drive wasn't mounted?
    The imac's CD drive doesn't work, so I tried to use an external CD drive to boot from the install disk, but it didn't come up with the boot options when I held down the option key--just a black screen. If the hard drive was bad, would it cause a black screen?
    Thanks in advance,
    Peter

    Keep in mind that you have to repair a drive with a Disk Utility version that is the same OS as the one you are trying to repair. Example, 10.5's Disk Repair on a 10.5 system. Otherwise you will get erroneous errors. If you did that, read on.
    pythonkid94 wrote:
    Was this error because disk utility said the hard drive wasn't mounted?
    No, it said Disk Utility's Disk Repair couldn't fix it. It may be so damaged that it will not mount.
    If Disk Utility can't fix it, you'll need a more robust utility to repair it.
    I would recommend DiskWarrior. It is the best at directory repairs. It rebuilds then actually replaces your old directory. I feel every Mac owner should have a copy.
    It also has File System repair now and hard drive S.M.A.R.T. diagnostics.
    Make sure you get the disk so you can boot up on it to run repairs. You can also install it on another drive and run it from there to repair this one. DW works faster that way. But sometimes a badly damaged system can be deemed unrepairable by the installed version, but if booted and repaired from the DW disk it may be repairable. This has happened to me.
    I use DW once a month to try and catch errors in my system from getting too far out of hand. It has repaired every little and big issue I have ever had with my three Macs.
    If your friend has a good backup, hopefully a clone of your system before you had issues, an Erase and Install may also rid you of this issue. But, beware! You will lose everything on the drive with this procedure. Let us know if you need help with that!
    Good Luck! DALE

  • PowerBook G4 froze, won't boot, black screen

    I have a PowerBook G4 1.67GHz (DL-Hi Res) running OS 10.5.8 with 1GB of RAM.  It has been a great machine; reliable with no major issues throughout the years and still fast for its age.  Unfortunately two days ago the screen came to a complete freeze and since then I haven't been able to boot into its OS. 
    In particular, that afternoon I visited the Weather Channel web site and then left the house.  When I came back three hours later, I found the screen frozen at the Weather Channel site.  The mouse cursor would not move, the clock (on upper right side of the screen) was also stuck at 4:10pm, which was about the time when I last used the computer, and the fan was running faster than normal but not spinning out of control; moreover, the laptop felt as warm as when I stream live video from the Web, not hot though.  Since the computer was unresponsive I decided to turn it off by pressing and holding its power button for several seconds.  I should mention that there was nothing connected to the computer when this happened and that there was nothing that was installed, updated or upgraded recently.
    When I attempted to turn it back on, the sleep light came and stayed on, the startup tone was heard once, the fan started running at normal speed and the optical drive did its normal startup spin; meanwhile, the screen was pitch black and stayed like that.  Five seconds later the optical drive did its normal startup spin again; five seconds later it did it again and then again and again.... and it kept doing it every five seconds until I shut the computer off by pressing and holding its power button.  I am not sure whether or not the hard drive was spinning during the startup.
    Any ideas what the problem might and how to revive my powerbook (if possible)?  Any help will be greatly appreciated.

    Tom, thank you very much for replying.
    I read the links you provided and here is everything I've done so far to revive my powerbook:
    - Started up without the battery (though the battery is fully functional)
    - Started up with the battery installed
    - Started up in Single-user Mode
    - Attempted to reset the PRAM
    - Started up in Safe Mode
    - Tried to get into the Startup Manager
    - Attempted to reset the PMU
    - Started up in Open Firmware
    All of the above attempts failed to produce any good results.  Each time I tried to start up the laptop, the sleep light indicator would come and stay on, then came the chime (except for two times), the fan would run at normal speed and the optical drive would keep doing its startup spin every 5 seconds until I would shut the computer off.
    Here is the last thing I tried... Since I was even unable to get into Open Firmware I decided to press and hold the power button, as suggested by one of the Apple Support documents, until the computer is forced to boot into Open Firmware.  Instead of the Open Firmware what I got was a brief high-speed spin of the fan, fast blinking of the sleep light indicator and a single deep, somewhat loud and long beep.  What I just described lasted for a few (maybe several) seconds and then the sleep light stabilized, the chime came on and the optical drive started doing its thing every 5 seconds.
    Any more ideas / suggestions?

  • MBP won't boot, black screen, no white LED, clicking hard drive noise

    Hey everybody, so the title basically summarizes it all. I connected an IDE HDD to my Macbook Pro through a USB enclosure, which had an AC IN jack, for plugging it into an electrical outlet (which I did) and the moment I connected it to my computer's usb port, the screen suddenly went black. I disconnected the HDD, and tried to turn on my MBP but it was no use. Ever since I have tried again and again to turn it on, but the computer will not boot. I have performed all of the suggested steps by Apple (PRAM reboot, holding down different keys while pressing the "on" button, etc.) but it's been worthless. My hard drive is okay, since i took it out and found out that all of my information and files were there. Still, whenever I try to turn the computer on, a clicking sound can be heard, as if the HD was trying to spin but failed. I have no display whatsoever, and no white LED in the front. I am truly desperate and would appreciate anyone's help big time.
    Thanks a lot,
    Luis

    Thanks for the reply but it isn't a hard drive issue.  I have tested the hard drive in an external enclosure and it's working fine.  I even put in another hard drive i have and it wont boot that either.  I'm thinking its a logic board issue.  Any one know best place to get logic board replacement near london for cheap

  • After pacman -Syu upgrade xfce boots black screen cursor

    Hello,
    I've recently upgraded the system with pacman -Syu and it seem something has gone wrong with new xfce 4.12. I have changed DM from slim to lxdm and can only boot to openbox but not xfce. I also switch to tty2 and try a startx with ~/.xinitrc file with exec startxfce4 but it does not launch properly. What I mean is both the display manager and a startx boots me into a black screen with a cursor when i try to launch xfce. Again I can boot to openbox just fine. I've searched for similar topics but cant seem to find any solution. Can anyone help?
    [ 18.673]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 18.673] X Protocol Version 11, Revision 0
    [ 18.673] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 18.673] Current Operating System: Linux arch-server 3.14.35-1-lts #1 SMP Sat Mar 7 19:24:12 CET 2015 x86_64
    [ 18.674] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
    [ 18.674] Build Date: 14 March 2015 06:45:50PM
    [ 18.674]
    [ 18.674] Current version of pixman: 0.32.6
    [ 18.674] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 18.674] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 18.674] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 17 03:38:39 2015
    [ 18.937] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 19.047] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 19.553] (==) No Layout section. Using the first Screen section.
    [ 19.553] (**) |-->Screen "Default Screen" (0)
    [ 19.553] (**) | |-->Monitor "<default monitor>"
    [ 19.586] (==) No monitor specified for screen "Default Screen".
    Using a default monitor configuration.
    [ 19.586] (==) Automatically adding devices
    [ 19.586] (==) Automatically enabling devices
    [ 19.586] (==) Automatically adding GPU devices
    [ 20.294] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 20.294] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 20.294] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 20.354] (II) Loader magic: 0x815d80
    [ 20.354] (II) Module ABI versions:
    [ 20.354] X.Org ANSI C Emulation: 0.4
    [ 20.354] X.Org Video Driver: 19.0
    [ 20.354] X.Org XInput driver : 21.0
    [ 20.354] X.Org Server Extension : 9.0
    [ 20.356] (EE) systemd-logind: failed to get session: PID 940 does not belong to any known session
    [ 20.357] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 20.359] (--) PCI:*(0:1:5:0) 1002:9616:1462:7641 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/65536, 0xfea00000/1048576, I/O @ 0x0000d000/256
    [ 20.359] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 20.422] (II) "glx" will be loaded by default.
    [ 20.423] (II) LoadModule: "vnc"
    [ 20.568] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
    [ 22.029] (II) Module vnc: vendor="Constantin Kaplinsky"
    [ 22.029] compiled for 1.17.1, module version = 1.0.0
    [ 22.029] Module class: X.Org Server Extension
    [ 22.029] ABI class: X.Org Server Extension, version 9.0
    [ 22.029] (II) LoadModule: "glx"
    [ 22.030] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 24.054] (II) Module glx: vendor="X.Org Foundation"
    [ 24.208] compiled for 1.17.1, module version = 1.0.0
    [ 24.208] ABI class: X.Org Server Extension, version 9.0
    [ 24.208] (==) AIGLX enabled
    [ 24.208] (==) Matched ati as autoconfigured driver 0
    [ 24.208] (==) Matched ati as autoconfigured driver 1
    [ 24.208] (==) Matched modesetting as autoconfigured driver 2
    [ 24.208] (==) Matched fbdev as autoconfigured driver 3
    [ 24.208] (==) Matched vesa as autoconfigured driver 4
    [ 24.208] (==) Assigned the driver to the xf86ConfigLayout
    [ 24.208] (II) LoadModule: "ati"
    [ 24.261] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 24.332] (II) Module ati: vendor="X.Org Foundation"
    [ 24.332] compiled for 1.17.0, module version = 7.5.0
    [ 24.332] Module class: X.Org Video Driver
    [ 24.332] ABI class: X.Org Video Driver, version 19.0
    [ 24.332] (II) LoadModule: "radeon"
    [ 24.333] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 24.765] (II) Module radeon: vendor="X.Org Foundation"
    [ 24.765] compiled for 1.17.0, module version = 7.5.0
    [ 24.765] Module class: X.Org Video Driver
    [ 24.765] ABI class: X.Org Video Driver, version 19.0
    [ 24.765] (II) LoadModule: "modesetting"
    [ 24.765] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 24.878] (II) Module modesetting: vendor="X.Org Foundation"
    [ 24.878] compiled for 1.17.1, module version = 1.17.1
    [ 24.878] Module class: X.Org Video Driver
    [ 24.878] ABI class: X.Org Video Driver, version 19.0
    [ 24.878] (II) LoadModule: "fbdev"
    [ 24.878] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 25.005] (II) Module fbdev: vendor="X.Org Foundation"
    [ 25.005] compiled for 1.17.0, module version = 0.4.4
    [ 25.005] Module class: X.Org Video Driver
    [ 25.005] ABI class: X.Org Video Driver, version 19.0
    [ 25.005] (II) LoadModule: "vesa"
    [ 25.006] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 25.099] (II) Module vesa: vendor="X.Org Foundation"
    [ 25.099] compiled for 1.17.0, module version = 2.3.2
    [ 25.099] Module class: X.Org Video Driver
    [ 25.099] ABI class: X.Org Video Driver, version 19.0
    [ 25.099] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
    BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
    BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
    HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
    [ 25.111] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 25.111] (II) FBDEV: driver for framebuffer: fbdev
    [ 25.111] (II) VESA: driver for VESA chipsets: vesa
    [ 25.111] (++) using VT number 7
    [ 25.184] (II) [KMS] Kernel modesetting enabled.
    [ 25.184] (WW) Falling back to old probe method for modesetting
    [ 25.184] (WW) Falling back to old probe method for fbdev
    [ 25.184] (II) Loading sub module "fbdevhw"
    [ 25.184] (II) LoadModule: "fbdevhw"
    [ 25.184] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 25.280] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 25.280] compiled for 1.17.1, module version = 0.0.2
    [ 25.280] ABI class: X.Org Video Driver, version 19.0
    [ 25.280] (WW) Falling back to old probe method for vesa
    [ 25.280] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
    [ 25.280] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 25.280] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 25.280] (==) RADEON(0): Default visual is TrueColor
    [ 25.280] (==) RADEON(0): RGB weight 888
    [ 25.280] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 25.280] (--) RADEON(0): Chipset: "ATI Radeon 3000 Graphics" (ChipID = 0x9616)
    [ 25.280] (II) Loading sub module "dri2"
    [ 25.280] (II) LoadModule: "dri2"
    [ 25.280] (II) Module "dri2" already built-in
    [ 25.280] (II) Loading sub module "exa"
    [ 25.280] (II) LoadModule: "exa"
    [ 25.281] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 25.406] (II) Module exa: vendor="X.Org Foundation"
    [ 25.406] compiled for 1.17.1, module version = 2.6.0
    [ 25.406] ABI class: X.Org Video Driver, version 19.0
    [ 25.406] (II) RADEON(0): KMS Color Tiling: enabled
    [ 25.406] (II) RADEON(0): KMS Color Tiling 2D: enabled
    [ 25.406] (II) RADEON(0): KMS Pageflipping: enabled
    [ 25.406] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 25.440] (II) RADEON(0): Output VGA-0 has no monitor section
    [ 25.471] (II) RADEON(0): Output HDMI-0 has no monitor section
    [ 25.510] (II) RADEON(0): EDID for output VGA-0
    [ 25.541] (II) RADEON(0): EDID for output HDMI-0
    [ 25.541] (II) RADEON(0): Manufacturer: BBY Model: bb20 Serial#: 16843009
    [ 25.541] (II) RADEON(0): Year: 2012 Week: 0
    [ 25.541] (II) RADEON(0): EDID Version: 1.3
    [ 25.541] (II) RADEON(0): Digital Display Input
    [ 25.541] (II) RADEON(0): DFP 1.x compatible TMDS
    [ 25.541] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
    [ 25.541] (II) RADEON(0): Gamma: 2.20
    [ 25.541] (II) RADEON(0): DPMS capabilities: Off
    [ 25.541] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 25.541] (II) RADEON(0): First detailed timing is preferred mode
    [ 25.541] (II) RADEON(0): redX: 0.645 redY: 0.331 greenX: 0.335 greenY: 0.621
    [ 25.541] (II) RADEON(0): blueX: 0.152 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
    [ 25.541] (II) RADEON(0): Supported established timings:
    [ 25.541] (II) RADEON(0): 720x400@70Hz
    [ 25.541] (II) RADEON(0): 640x480@60Hz
    [ 25.541] (II) RADEON(0): 640x480@67Hz
    [ 25.541] (II) RADEON(0): 640x480@72Hz
    [ 25.541] (II) RADEON(0): 640x480@75Hz
    [ 25.541] (II) RADEON(0): 800x600@56Hz
    [ 25.541] (II) RADEON(0): 800x600@60Hz
    [ 25.541] (II) RADEON(0): 800x600@72Hz
    [ 25.541] (II) RADEON(0): 800x600@75Hz
    [ 25.541] (II) RADEON(0): 832x624@75Hz
    [ 25.542] (II) RADEON(0): 1024x768@60Hz
    [ 25.542] (II) RADEON(0): 1024x768@70Hz
    [ 25.542] (II) RADEON(0): 1024x768@75Hz
    [ 25.542] (II) RADEON(0): 1280x1024@75Hz
    [ 25.542] (II) RADEON(0): 1152x864@75Hz
    [ 25.542] (II) RADEON(0): Manufacturer's mask: 0
    [ 25.542] (II) RADEON(0): Supported standard timings:
    [ 25.542] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 25.542] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 25.542] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 25.542] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 25.542] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 25.542] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 25.542] (II) RADEON(0): Supported detailed timing:
    [ 25.542] (II) RADEON(0): clock: 97.8 MHz Image Size: 442 x 249 mm
    [ 25.542] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
    [ 25.542] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
    [ 25.542] (II) RADEON(0): Supported detailed timing:
    [ 25.542] (II) RADEON(0): clock: 85.5 MHz Image Size: 442 x 249 mm
    [ 25.542] (II) RADEON(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
    [ 25.542] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
    [ 25.542] (II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 155 MHz
    [ 25.542] (II) RADEON(0): Monitor name: NS-20EM50A13
    [ 25.542] (II) RADEON(0): EDID (in hex):
    [ 25.542] (II) RADEON(0): 00ffffffffffff00085920bb01010101
    [ 25.542] (II) RADEON(0): 00160103812c19782a3c25a554559f27
    [ 25.542] (II) RADEON(0): 0d5054bfef808180714f8140950f9500
    [ 25.542] (II) RADEON(0): 81c0010101012f2640a060841a303020
    [ 25.542] (II) RADEON(0): 3500baf91000001a662150b051001b30
    [ 25.542] (II) RADEON(0): 40703600baf91000001e000000fd0037
    [ 25.542] (II) RADEON(0): 4c1e520f000a202020202020000000fc
    [ 25.542] (II) RADEON(0): 004e532d3230454d35304131330a00a6
    [ 25.542] (II) RADEON(0): Printing probed modes for output HDMI-0
    [ 25.542] (II) RADEON(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
    [ 25.542] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 25.542] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 25.542] (II) RADEON(0): Output VGA-0 disconnected
    [ 25.542] (II) RADEON(0): Output HDMI-0 connected
    [ 25.542] (II) RADEON(0): Using exact sizes for initial modes
    [ 25.542] (II) RADEON(0): Output HDMI-0 using initial mode 1600x900
    [ 25.542] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 25.542] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fa3b000
    [ 25.542] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 25.542] (==) RADEON(0): DPI set to (96, 96)
    [ 25.542] (II) Loading sub module "fb"
    [ 25.542] (II) LoadModule: "fb"
    [ 25.542] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 25.769] (II) Module fb: vendor="X.Org Foundation"
    [ 25.769] compiled for 1.17.1, module version = 1.0.0
    [ 25.769] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 25.769] (II) Loading sub module "ramdac"
    [ 25.769] (II) LoadModule: "ramdac"
    [ 25.769] (II) Module "ramdac" already built-in
    [ 25.769] (II) UnloadModule: "modesetting"
    [ 25.769] (II) Unloading modesetting
    [ 25.769] (II) UnloadModule: "fbdev"
    [ 25.769] (II) Unloading fbdev
    [ 25.769] (II) UnloadSubModule: "fbdevhw"
    [ 25.769] (II) Unloading fbdevhw
    [ 25.769] (II) UnloadModule: "vesa"
    [ 25.769] (II) Unloading vesa
    [ 25.769] (--) Depth 24 pixmap format is 32 bpp
    [ 25.818] (II) RADEON(0): [DRI2] Setup complete
    [ 25.818] (II) RADEON(0): [DRI2] DRI driver: r600
    [ 25.818] (II) RADEON(0): [DRI2] VDPAU driver: r600
    [ 25.818] (II) RADEON(0): Front buffer size: 5652K
    [ 25.818] (II) RADEON(0): VRAM usage limit set to 225496K
    [ 25.853] (==) RADEON(0): Backing store enabled
    [ 25.853] (II) RADEON(0): Direct rendering enabled
    [ 25.853] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 25.853] (II) EXA(0): Driver registered support for the following operations:
    [ 25.853] (II) Solid
    [ 25.853] (II) Copy
    [ 25.853] (II) Composite (RENDER acceleration)
    [ 25.853] (II) UploadToScreen
    [ 25.853] (II) DownloadFromScreen
    [ 25.853] (II) RADEON(0): Acceleration enabled
    [ 25.853] (==) RADEON(0): DPMS enabled
    [ 25.853] (==) RADEON(0): Silken mouse enabled
    [ 25.920] (II) RADEON(0): Set up textured video
    [ 25.920] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [ 25.920] (II) RADEON(0): [XvMC] Extension initialized.
    [ 25.920] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 26.100] (WW) RADEON(0): Option "PasswordFile" is not used
    [ 26.100] (--) RandR disabled
    [ 32.355] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 32.355] (II) AIGLX: enabled GLX_ARB_create_context
    [ 32.355] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 32.355] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 32.355] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 32.355] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 32.355] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 32.355] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 32.355] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 32.357] (II) AIGLX: Loaded and initialized r600
    [ 32.357] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 32.358] (II) RADEON(0): Setting screen physical size to 423 x 238
    [ 35.161] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 35.161] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 35.161] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 35.161] (II) LoadModule: "evdev"
    [ 35.206] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 35.498] (II) Module evdev: vendor="X.Org Foundation"
    [ 35.498] compiled for 1.16.2, module version = 2.9.1
    [ 35.499] Module class: X.Org XInput Driver
    [ 35.499] ABI class: X.Org XInput driver, version 21.0
    [ 35.499] (II) Using input driver 'evdev' for 'Power Button'
    [ 35.499] (**) Power Button: always reports core events
    [ 35.499] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 35.499] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 35.499] (--) evdev: Power Button: Found keys
    [ 35.499] (II) evdev: Power Button: Configuring as keyboard
    [ 35.499] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
    [ 35.499] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 35.499] (**) Option "xkb_rules" "evdev"
    [ 35.499] (**) Option "xkb_model" "pc104"
    [ 35.499] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.975] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 35.975] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 35.975] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 35.975] (II) Using input driver 'evdev' for 'Power Button'
    [ 35.975] (**) Power Button: always reports core events
    [ 35.975] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 35.975] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 35.975] (--) evdev: Power Button: Found keys
    [ 35.975] (II) evdev: Power Button: Configuring as keyboard
    [ 35.975] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
    [ 35.975] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 35.975] (**) Option "xkb_rules" "evdev"
    [ 35.975] (**) Option "xkb_model" "pc104"
    [ 35.976] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.977] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event9)
    [ 35.977] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
    [ 35.977] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
    [ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event9"
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
    [ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
    [ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
    [ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
    [ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 35.978] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input12/event9"
    [ 35.978] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 8)
    [ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
    [ 35.979] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
    [ 35.979] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse1)
    [ 35.979] (II) No input driver specified, ignoring this device.
    [ 35.979] (II) This device may have been added with another device file.
    [ 35.980] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event7)
    [ 35.980] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 35.980] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 35.980] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 35.980] (**) Generic USB Keyboard: always reports core events
    [ 35.980] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event7"
    [ 35.980] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 35.980] (--) evdev: Generic USB Keyboard: Found keys
    [ 35.980] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 35.980] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:040B:2000.0004/input/input10/event7"
    [ 35.980] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
    [ 35.980] (**) Option "xkb_rules" "evdev"
    [ 35.980] (**) Option "xkb_model" "pc104"
    [ 35.980] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.981] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event8)
    [ 35.981] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 35.981] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 35.981] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 35.981] (**) Generic USB Keyboard: always reports core events
    [ 35.981] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event8"
    [ 35.981] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 35.981] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
    [ 35.981] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
    [ 35.981] (--) evdev: Generic USB Keyboard: Found relative axes
    [ 35.981] (--) evdev: Generic USB Keyboard: Found x and y relative axes
    [ 35.981] (--) evdev: Generic USB Keyboard: Found keys
    [ 35.981] (II) evdev: Generic USB Keyboard: Configuring as mouse
    [ 35.981] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 35.981] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
    [ 35.981] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
    [ 35.981] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 35.981] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:040B:2000.0005/input/input11/event8"
    [ 35.981] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
    [ 35.981] (**) Option "xkb_rules" "evdev"
    [ 35.981] (**) Option "xkb_model" "pc104"
    [ 35.981] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.981] (II) evdev: Generic USB Keyboard: initialized for relative axes.
    [ 35.981] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
    [ 35.982] (**) Generic USB Keyboard: (accel) acceleration profile 0
    [ 35.982] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
    [ 35.982] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
    [ 35.982] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse0)
    [ 35.982] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 35.982] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 35.982] (**) Generic USB Keyboard: always reports core events
    [ 35.982] (**) evdev: Generic USB Keyboard: Device: "/dev/input/mouse0"
    [ 35.982] (EE) evdev: Generic USB Keyboard: Unable to query fd: Inappropriate ioctl for device
    [ 36.060] (EE) PreInit returned 2 for "Generic USB Keyboard"
    [ 36.060] (II) UnloadModule: "evdev"
    [ 36.060] (II) config/udev: Adding input device HP Webcam HD-2200 (/dev/input/event10)
    [ 36.060] (**) HP Webcam HD-2200: Applying InputClass "evdev keyboard catchall"
    [ 36.060] (**) HP Webcam HD-2200: Applying InputClass "keyboard-layout"
    [ 36.060] (II) Using input driver 'evdev' for 'HP Webcam HD-2200'
    [ 36.060] (**) HP Webcam HD-2200: always reports core events
    [ 36.061] (**) evdev: HP Webcam HD-2200: Device: "/dev/input/event10"
    [ 36.061] (--) evdev: HP Webcam HD-2200: Vendor 0x3f0 Product 0xa707
    [ 36.061] (--) evdev: HP Webcam HD-2200: Found keys
    [ 36.061] (II) evdev: HP Webcam HD-2200: Configuring as keyboard
    [ 36.061] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input13/event10"
    [ 36.061] (II) XINPUT: Adding extended input device "HP Webcam HD-2200" (type: KEYBOARD, id 11)
    [ 36.061] (**) Option "xkb_rules" "evdev"
    [ 36.061] (**) Option "xkb_model" "pc104"
    [ 36.061] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 36.062] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
    [ 36.062] (II) No input driver specified, ignoring this device.
    [ 36.062] (II) This device may have been added with another device file.
    [ 36.063] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
    [ 36.063] (II) No input driver specified, ignoring this device.
    [ 36.063] (II) This device may have been added with another device file.
    [ 36.063] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
    [ 36.063] (II) No input driver specified, ignoring this device.
    [ 36.063] (II) This device may have been added with another device file.
    [ 36.064] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
    [ 36.064] (II) No input driver specified, ignoring this device.
    [ 36.064] (II) This device may have been added with another device file.
    [ 36.064] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
    [ 36.064] (II) No input driver specified, ignoring this device.
    [ 36.064] (II) This device may have been added with another device file.
    [ 53.210] (II) RADEON(0): EDID vendor "BBY", prod id 47904
    [ 53.210] (II) RADEON(0): Using EDID range info for horizontal sync
    [ 53.210] (II) RADEON(0): Using EDID range info for vertical refresh
    [ 53.210] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 53.210] (II) RADEON(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
    [ 53.210] (II) RADEON(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
    [ 62.870] (II) AIGLX: Suspending AIGLX clients for VT switch
    Last edited by mavo (2015-03-17 13:08:53)

    alphaniner wrote:The preferred way to test a 'default session' is with a clean non-root user. Logging in as root can hide other issues.
    Ok i get that. Here is xorg log and journalctl -b log. I rebooted tried to login through lxdm and got the cursor and blank screen. I then tty3 and startx and launched into openbox to post these results. Still cannot get into xfce as normal user. Thoughts???
    ~.local/share/xorg/Xorg.1.log
    [ 84.848]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 84.848] X Protocol Version 11, Revision 0
    [ 84.848] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 84.848] Current Operating System: Linux arch-server 3.14.35-1-lts #1 SMP Sat Mar 7 19:24:12 CET 2015 x86_64
    [ 84.848] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
    [ 84.848] Build Date: 14 March 2015 06:45:50PM
    [ 84.849]
    [ 84.849] Current version of pixman: 0.32.6
    [ 84.849] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 84.849] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 84.850] (==) Log file: "/home/molmedo1/.local/share/xorg/Xorg.1.log", Time: Wed Mar 18 10:06:18 2015
    [ 84.850] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 84.850] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 84.851] (==) No Layout section. Using the first Screen section.
    [ 84.851] (**) |-->Screen "Default Screen" (0)
    [ 84.851] (**) | |-->Monitor "<default monitor>"
    [ 84.851] (==) No monitor specified for screen "Default Screen".
    Using a default monitor configuration.
    [ 84.851] (==) Automatically adding devices
    [ 84.851] (==) Automatically enabling devices
    [ 84.851] (==) Automatically adding GPU devices
    [ 84.851] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 84.851] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 84.851] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 84.851] (II) Loader magic: 0x815d80
    [ 84.851] (II) Module ABI versions:
    [ 84.851] X.Org ANSI C Emulation: 0.4
    [ 84.851] X.Org Video Driver: 19.0
    [ 84.851] X.Org XInput driver : 21.0
    [ 84.851] X.Org Server Extension : 9.0
    [ 84.856] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
    [ 84.856] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 84.857] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 84.859] (--) PCI:*(0:1:5:0) 1002:9616:1462:7641 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/65536, 0xfea00000/1048576, I/O @ 0x0000d000/256
    [ 84.859] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 84.859] (II) "glx" will be loaded by default.
    [ 84.859] (II) LoadModule: "vnc"
    [ 84.860] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
    [ 84.868] (II) Module vnc: vendor="Constantin Kaplinsky"
    [ 84.868] compiled for 1.17.1, module version = 1.0.0
    [ 84.868] Module class: X.Org Server Extension
    [ 84.868] ABI class: X.Org Server Extension, version 9.0
    [ 84.868] (II) LoadModule: "glx"
    [ 84.868] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 84.870] (II) Module glx: vendor="X.Org Foundation"
    [ 84.870] compiled for 1.17.1, module version = 1.0.0
    [ 84.870] ABI class: X.Org Server Extension, version 9.0
    [ 84.870] (==) AIGLX enabled
    [ 84.870] (==) Matched ati as autoconfigured driver 0
    [ 84.870] (==) Matched ati as autoconfigured driver 1
    [ 84.870] (==) Matched modesetting as autoconfigured driver 2
    [ 84.870] (==) Matched fbdev as autoconfigured driver 3
    [ 84.870] (==) Matched vesa as autoconfigured driver 4
    [ 84.870] (==) Assigned the driver to the xf86ConfigLayout
    [ 84.870] (II) LoadModule: "ati"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 84.871] (II) Module ati: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 7.5.0
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "radeon"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 84.871] (II) Module radeon: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 7.5.0
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "modesetting"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 84.871] (II) Module modesetting: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.1, module version = 1.17.1
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "fbdev"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 84.871] (II) Module fbdev: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 0.4.4
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "vesa"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 84.871] (II) Module vesa: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 2.3.2
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
    BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
    BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
    HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
    [ 84.876] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 84.876] (II) FBDEV: driver for framebuffer: fbdev
    [ 84.876] (II) VESA: driver for VESA chipsets: vesa
    [ 84.876] (++) using VT number 3
    [ 84.876] (--) controlling tty is VT number 3, auto-enabling KeepTty
    [ 84.876] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
    [ 84.876] (II) [KMS] Kernel modesetting enabled.
    [ 84.876] (WW) Falling back to old probe method for modesetting
    [ 84.876] (WW) Falling back to old probe method for fbdev
    [ 84.876] (II) Loading sub module "fbdevhw"
    [ 84.876] (II) LoadModule: "fbdevhw"
    [ 84.876] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 84.876] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 84.876] compiled for 1.17.1, module version = 0.0.2
    [ 84.876] ABI class: X.Org Video Driver, version 19.0
    [ 84.876] (WW) Falling back to old probe method for vesa
    [ 84.876] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
    [ 84.876] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
    [ 84.876] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 84.876] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 84.876] (==) RADEON(0): Default visual is TrueColor
    [ 84.876] (==) RADEON(0): RGB weight 888
    [ 84.876] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 84.876] (--) RADEON(0): Chipset: "ATI Radeon 3000 Graphics" (ChipID = 0x9616)
    [ 84.876] (II) Loading sub module "dri2"
    [ 84.876] (II) LoadModule: "dri2"
    [ 84.876] (II) Module "dri2" already built-in
    [ 84.876] (II) Loading sub module "exa"
    [ 84.876] (II) LoadModule: "exa"
    [ 84.877] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 84.877] (II) Module exa: vendor="X.Org Foundation"
    [ 84.877] compiled for 1.17.1, module version = 2.6.0
    [ 84.877] ABI class: X.Org Video Driver, version 19.0
    [ 84.877] (II) RADEON(0): KMS Color Tiling: enabled
    [ 84.877] (II) RADEON(0): KMS Color Tiling 2D: enabled
    [ 84.877] (II) RADEON(0): KMS Pageflipping: enabled
    [ 84.877] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 84.920] (II) RADEON(0): Output VGA-0 has no monitor section
    [ 84.951] (II) RADEON(0): Output HDMI-0 has no monitor section
    [ 84.990] (II) RADEON(0): EDID for output VGA-0
    [ 85.021] (II) RADEON(0): EDID for output HDMI-0
    [ 85.021] (II) RADEON(0): Manufacturer: BBY Model: bb20 Serial#: 16843009
    [ 85.021] (II) RADEON(0): Year: 2012 Week: 0
    [ 85.021] (II) RADEON(0): EDID Version: 1.3
    [ 85.021] (II) RADEON(0): Digital Display Input
    [ 85.021] (II) RADEON(0): DFP 1.x compatible TMDS
    [ 85.021] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
    [ 85.021] (II) RADEON(0): Gamma: 2.20
    [ 85.021] (II) RADEON(0): DPMS capabilities: Off
    [ 85.021] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 85.021] (II) RADEON(0): First detailed timing is preferred mode
    [ 85.021] (II) RADEON(0): redX: 0.645 redY: 0.331 greenX: 0.335 greenY: 0.621
    [ 85.021] (II) RADEON(0): blueX: 0.152 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
    [ 85.021] (II) RADEON(0): Supported established timings:
    [ 85.021] (II) RADEON(0): 720x400@70Hz
    [ 85.021] (II) RADEON(0): 640x480@60Hz
    [ 85.021] (II) RADEON(0): 640x480@67Hz
    [ 85.021] (II) RADEON(0): 640x480@72Hz
    [ 85.021] (II) RADEON(0): 640x480@75Hz
    [ 85.021] (II) RADEON(0): 800x600@56Hz
    [ 85.021] (II) RADEON(0): 800x600@60Hz
    [ 85.021] (II) RADEON(0): 800x600@72Hz
    [ 85.021] (II) RADEON(0): 800x600@75Hz
    [ 85.021] (II) RADEON(0): 832x624@75Hz
    [ 85.021] (II) RADEON(0): 1024x768@60Hz
    [ 85.021] (II) RADEON(0): 1024x768@70Hz
    [ 85.021] (II) RADEON(0): 1024x768@75Hz
    [ 85.021] (II) RADEON(0): 1280x1024@75Hz
    [ 85.021] (II) RADEON(0): 1152x864@75Hz
    [ 85.021] (II) RADEON(0): Manufacturer's mask: 0
    [ 85.021] (II) RADEON(0): Supported standard timings:
    [ 85.021] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 85.021] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 85.021] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 85.021] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 85.021] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 85.021] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 85.021] (II) RADEON(0): Supported detailed timing:
    [ 85.021] (II) RADEON(0): clock: 97.8 MHz Image Size: 442 x 249 mm
    [ 85.021] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
    [ 85.021] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
    [ 85.021] (II) RADEON(0): Supported detailed timing:
    [ 85.021] (II) RADEON(0): clock: 85.5 MHz Image Size: 442 x 249 mm
    [ 85.021] (II) RADEON(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
    [ 85.021] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
    [ 85.021] (II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 155 MHz
    [ 85.021] (II) RADEON(0): Monitor name: NS-20EM50A13
    [ 85.021] (II) RADEON(0): EDID (in hex):
    [ 85.021] (II) RADEON(0): 00ffffffffffff00085920bb01010101
    [ 85.021] (II) RADEON(0): 00160103812c19782a3c25a554559f27
    [ 85.021] (II) RADEON(0): 0d5054bfef808180714f8140950f9500
    [ 85.021] (II) RADEON(0): 81c0010101012f2640a060841a303020
    [ 85.021] (II) RADEON(0): 3500baf91000001a662150b051001b30
    [ 85.021] (II) RADEON(0): 40703600baf91000001e000000fd0037
    [ 85.022] (II) RADEON(0): 4c1e520f000a202020202020000000fc
    [ 85.022] (II) RADEON(0): 004e532d3230454d35304131330a00a6
    [ 85.022] (II) RADEON(0): Printing probed modes for output HDMI-0
    [ 85.022] (II) RADEON(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
    [ 85.022] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 85.022] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 85.022] (II) RADEON(0): Output VGA-0 disconnected
    [ 85.022] (II) RADEON(0): Output HDMI-0 connected
    [ 85.022] (II) RADEON(0): Using exact sizes for initial modes
    [ 85.022] (II) RADEON(0): Output HDMI-0 using initial mode 1600x900
    [ 85.022] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 85.022] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fa3b000
    [ 85.022] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 85.022] (==) RADEON(0): DPI set to (96, 96)
    [ 85.022] (II) Loading sub module "fb"
    [ 85.022] (II) LoadModule: "fb"
    [ 85.022] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 85.022] (II) Module fb: vendor="X.Org Foundation"
    [ 85.022] compiled for 1.17.1, module version = 1.0.0
    [ 85.022] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 85.022] (II) Loading sub module "ramdac"
    [ 85.022] (II) LoadModule: "ramdac"
    [ 85.022] (II) Module "ramdac" already built-in
    [ 85.022] (II) UnloadModule: "modesetting"
    [ 85.022] (II) Unloading modesetting
    [ 85.022] (II) UnloadModule: "fbdev"
    [ 85.022] (II) Unloading fbdev
    [ 85.022] (II) UnloadSubModule: "fbdevhw"
    [ 85.022] (II) Unloading fbdevhw
    [ 85.022] (II) UnloadModule: "vesa"
    [ 85.022] (II) Unloading vesa
    [ 85.022] (--) Depth 24 pixmap format is 32 bpp
    [ 85.023] (II) RADEON(0): [DRI2] Setup complete
    [ 85.023] (II) RADEON(0): [DRI2] DRI driver: r600
    [ 85.023] (II) RADEON(0): [DRI2] VDPAU driver: r600
    [ 85.023] (II) RADEON(0): Front buffer size: 5652K
    [ 85.023] (II) RADEON(0): VRAM usage limit set to 225496K
    [ 85.023] (==) RADEON(0): Backing store enabled
    [ 85.023] (II) RADEON(0): Direct rendering enabled
    [ 85.023] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 85.023] (II) EXA(0): Driver registered support for the following operations:
    [ 85.023] (II) Solid
    [ 85.023] (II) Copy
    [ 85.023] (II) Composite (RENDER acceleration)
    [ 85.023] (II) UploadToScreen
    [ 85.023] (II) DownloadFromScreen
    [ 85.023] (II) RADEON(0): Acceleration enabled
    [ 85.023] (==) RADEON(0): DPMS enabled
    [ 85.023] (==) RADEON(0): Silken mouse enabled
    [ 85.023] (II) RADEON(0): Set up textured video
    [ 85.023] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [ 85.023] (II) RADEON(0): [XvMC] Extension initialized.
    [ 85.023] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 85.023] (WW) RADEON(0): Option "PasswordFile" is not used
    [ 85.023] (--) RandR disabled
    [ 85.047] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 85.047] (II) AIGLX: enabled GLX_ARB_create_context
    [ 85.047] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 85.047] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 85.047] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 85.047] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 85.047] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 85.047] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 85.047] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 85.048] (II) AIGLX: Loaded and initialized r600
    [ 85.048] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 85.048] (II) RADEON(0): Setting screen physical size to 423 x 238
    [ 85.088] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 85.088] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 85.088] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 85.088] (II) LoadModule: "evdev"
    [ 85.088] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 85.089] (II) Module evdev: vendor="X.Org Foundation"
    [ 85.089] compiled for 1.16.2, module version = 2.9.1
    [ 85.089] Module class: X.Org XInput Driver
    [ 85.089] ABI class: X.Org XInput driver, version 21.0
    [ 85.089] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 13 paused 0
    [ 85.090] (II) Using input driver 'evdev' for 'Power Button'
    [ 85.090] (**) Power Button: always reports core events
    [ 85.090] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 85.090] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 85.090] (--) evdev: Power Button: Found keys
    [ 85.090] (II) evdev: Power Button: Configuring as keyboard
    [ 85.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
    [ 85.090] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 85.090] (**) Option "xkb_rules" "evdev"
    [ 85.090] (**) Option "xkb_model" "pc104"
    [ 85.090] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.123] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 85.123] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 85.123] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 85.124] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 14 paused 0
    [ 85.124] (II) Using input driver 'evdev' for 'Power Button'
    [ 85.124] (**) Power Button: always reports core events
    [ 85.124] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 85.124] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 85.124] (--) evdev: Power Button: Found keys
    [ 85.124] (II) evdev: Power Button: Configuring as keyboard
    [ 85.124] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
    [ 85.124] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 85.124] (**) Option "xkb_rules" "evdev"
    [ 85.124] (**) Option "xkb_model" "pc104"
    [ 85.124] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.125] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event9)
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
    [ 85.125] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 15 paused 0
    [ 85.125] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
    [ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event9"
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
    [ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
    [ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
    [ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
    [ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 85.125] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input12/event9"
    [ 85.125] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 8)
    [ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
    [ 85.126] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse1)
    [ 85.126] (II) No input driver specified, ignoring this device.
    [ 85.126] (II) This device may have been added with another device file.
    [ 85.126] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event7)
    [ 85.126] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 85.126] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 85.126] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 16 paused 0
    [ 85.126] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 85.126] (**) Generic USB Keyboard: always reports core events
    [ 85.126] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event7"
    [ 85.126] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 85.126] (--) evdev: Generic USB Keyboard: Found keys
    [ 85.126] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 85.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:040B:2000.0004/input/input10/event7"
    [ 85.126] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
    [ 85.126] (**) Option "xkb_rules" "evdev"
    [ 85.126] (**) Option "xkb_model" "pc104"
    [ 85.126] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.127] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event8)
    [ 85.127] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 85.127] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 85.127] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 17 paused 0
    [ 85.127] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 85.127] (**) Generic USB Keyboard: always reports core events
    [ 85.127] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event8"
    [ 85.127] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 85.127] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
    [ 85.127] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
    [ 85.127] (--) evdev: Generic USB Keyboard: Found relative axes
    [ 85.127] (--) evdev: Generic USB Keyboard: Found x and y relative axes
    [ 85.127] (--) evdev: Generic USB Keyboard: Found keys
    [ 85.127] (II) evdev: Generic USB Keyboard: Configuring as mouse
    [ 85.127] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 85.127] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
    [ 85.127] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
    [ 85.127] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 85.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:040B:2000.0005/input/input11/event8"
    [ 85.127] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
    [ 85.127] (**) Option "xkb_rules" "evdev"
    [ 85.127] (**) Option "xkb_model" "pc104"
    [ 85.127] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.128] (II) evdev: Generic USB Keyboard: initialized for relative axes.
    [ 85.128] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
    [ 85.128] (**) Generic USB Keyboard: (accel) acceleration profile 0
    [ 85.128] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
    [ 85.128] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
    [ 85.128] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse0)
    [ 85.128] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 85.128] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 85.128] (**) Generic USB Keyboard: always reports core events
    [ 85.128] (**) evdev: Generic USB Keyboard: Device: "/dev/input/mouse0"
    [ 85.128] (EE) evdev: Generic USB Keyboard: Unable to query fd: Inappropriate ioctl for device
    [ 85.220] (EE) PreInit returned 2 for "Generic USB Keyboard"
    [ 85.220] (II) UnloadModule: "evdev"
    [ 85.220] (II) config/udev: Adding input device HP Webcam HD-2200 (/dev/input/event10)
    [ 85.220] (**) HP Webcam HD-2200: Applying InputClass "evdev keyboard catchall"
    [ 85.220] (**) HP Webcam HD-2200: Applying InputClass "keyboard-layout"
    [ 85.221] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 18 paused 0
    [ 85.221] (II) Using input driver 'evdev' for 'HP Webcam HD-2200'
    [ 85.221] (**) HP Webcam HD-2200: always reports core events
    [ 85.221] (**) evdev: HP Webcam HD-2200: Device: "/dev/input/event10"
    [ 85.221] (--) evdev: HP Webcam HD-2200: Vendor 0x3f0 Product 0xa707
    [ 85.221] (--) evdev: HP Webcam HD-2200: Found keys
    [ 85.221] (II) evdev: HP Webcam HD-2200: Configuring as keyboard
    [ 85.221] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb6/6-5/6-5:1.0/input/input13/event10"
    [ 85.222] (II) XINPUT: Adding extended input device "HP Webcam HD-2200" (type: KEYBOARD, id 11)
    [ 85.222] (**) Option "xkb_rules" "evdev"
    [ 85.222] (**) Option "xkb_model" "pc104"
    [ 85.222] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.223] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
    [ 85.223] (II) No input driver specified, ignoring this device.
    [ 85.223] (II) This device may have been added with another device file.
    [ 85.223] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
    [ 85.223] (II) No input driver specified, ignoring this device.
    [ 85.223] (II) This device may have been added with another device file.
    [ 85.224] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
    [ 85.224] (II) No input driver specified, ignoring this device.
    [ 85.224] (II) This device may have been added with another device file.
    [ 85.224] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
    [ 85.225] (II) No input driver specified, ignoring this device.
    [ 85.225] (II) This device may have been added with another device file.
    [ 85.225] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
    [ 85.225] (II) No input driver specified, ignoring this device.
    [ 85.225] (II) This device may have been added with another device file.
    journalctl -b
    Mar 18 10:05:02 arch-server kernel: 00000-9FFFF write-back
    Mar 18 10:05:02 arch-server kernel: A0000-EFFFF uncachable
    Mar 18 10:05:02 arch-server kernel: F0000-FFFFF write-protect
    Mar 18 10:05:02 arch-server kernel: MTRR variable ranges enabled:
    Mar 18 10:05:02 arch-server kernel: 0 base 000000000000 mask FFFF80000000 write-back
    Mar 18 10:05:02 arch-server kernel: 1 base 000080000000 mask FFFFC0000000 write-back
    Mar 18 10:05:02 arch-server kernel: 2 base 0000C0000000 mask FFFFF0000000 write-back
    Mar 18 10:05:02 arch-server kernel: 3 disabled
    Mar 18 10:05:02 arch-server kernel: 4 disabled
    Mar 18 10:05:02 arch-server kernel: 5 disabled
    Mar 18 10:05:02 arch-server kernel: 6 disabled
    Mar 18 10:05:02 arch-server kernel: 7 disabled
    Mar 18 10:05:02 arch-server kernel: TOM2: 0000000430000000 aka 17152M
    Mar 18 10:05:03 arch-server kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Mar 18 10:05:03 arch-server kernel: e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
    Mar 18 10:05:03 arch-server kernel: e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
    Mar 18 10:05:03 arch-server kernel: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
    Mar 18 10:05:03 arch-server kernel: Scanning 1 areas for low memory corruption
    Mar 18 10:05:03 arch-server kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Mar 18 10:05:03 arch-server kernel: Using GB pages for direct mapping
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x00000000-0x000fffff] page 4k
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b3e000, 0x01b3efff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b40000, 0x01b40fff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x41fe00000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x41fe00000-0x41fffffff] page 2M
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b41000, 0x01b41fff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x41c000000-0x41fdfffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x41c000000-0x41fdfffff] page 2M
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x400000000-0x41bffffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x400000000-0x41bffffff] page 2M
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x00100000-0xcff8ffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x00100000-0x001fffff] page 4k
    Mar 18 10:05:03 arch-server kernel: [mem 0x00200000-0x3fffffff] page 2M
    Mar 18 10:05:03 arch-server kernel: [mem 0x40000000-0xbfffffff] page 1G
    Mar 18 10:05:03 arch-server kernel: [mem 0xc0000000-0xcfdfffff] page 2M
    Mar 18 10:05:03 arch-server kernel: [mem 0xcfe00000-0xcff8ffff] page 4k
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x100000000-0x3ffffffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x100000000-0x3ffffffff] page 1G
    Mar 18 10:05:03 arch-server kernel: RAMDISK: [mem 0x3784e000-0x37c1efff]
    Mar 18 10:05:03 arch-server kernel: ACPI: RSDP 00000000000f8d00 000014 (v00 ACPIAM)
    Mar 18 10:05:03 arch-server kernel: ACPI: RSDT 00000000cff90000 00003C (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: FACP 00000000cff90200 000084 (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131218/
    Mar 18 10:05:03 arch-server kernel: ACPI: DSDT 00000000cff90660 009DF0 (v01 A7641 A7641100 00000100 INTL 20051117)
    Mar 18 10:05:03 arch-server kernel: ACPI: FACS 00000000cff9e000 000040
    Mar 18 10:05:03 arch-server kernel: ACPI: APIC 00000000cff90390 00010C (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: MCFG 00000000cff904a0 00003C (v01 7641MS OEMMCFG 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: OEMB 00000000cff9e040 000072 (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: HPET 00000000cff9a660 000038 (v01 7641MS OEMHPET 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: SSDT 00000000cff9a6a0 000D40 (v01 A M I POWERNOW 00000001 AMD 00000001)
    Mar 18 10:05:03 arch-server kernel: ACPI: Local APIC address 0xfee00000
    Mar 18 10:05:03 arch-server kernel: No NUMA configuration found
    Mar 18 10:05:03 arch-server kernel: Faking a node at [mem 0x0000000000000000-0x000000041fffffff]
    Mar 18 10:05:03 arch-server kernel: Initmem setup node 0 [mem 0x00000000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: NODE_DATA [mem 0x41fff9000-0x41fffdfff]
    Mar 18 10:05:03 arch-server kernel: [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040fa00000-ffff88041f5fffff] on node 0
    Mar 18 10:05:03 arch-server kernel: Zone ranges:
    Mar 18 10:05:03 arch-server kernel: DMA [mem 0x00001000-0x00ffffff]
    Mar 18 10:05:03 arch-server kernel: DMA32 [mem 0x01000000-0xffffffff]
    Mar 18 10:05:03 arch-server kernel: Normal [mem 0x100000000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: Movable zone start for each node
    Mar 18 10:05:03 arch-server kernel: Early memory node ranges
    Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x00001000-0x0009efff]
    Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x00100000-0xcff8ffff]
    Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x100000000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: On node 0 totalpages: 4128558
    Mar 18 10:05:03 arch-server kernel: DMA zone: 64 pages used for memmap
    Mar 18 10:05:03 arch-server kernel: DMA zone: 21 pages reserved
    Mar 18 10:05:03 arch-server kernel: DMA zone: 3998 pages, LIFO batch:0
    Mar 18 10:05:03 arch-server kernel: DMA32 zone: 13247 pages used for memmap
    Mar 18 10:05:03 arch-server kernel: DMA32 zone: 847760 pages, LIFO batch:31
    Mar 18 10:05:03 arch-server kernel: Normal zone: 51200 pages used for memmap
    Mar 18 10:05:03 arch-server kernel: Normal zone: 3276800 pages, LIFO batch:31
    Mar 18 10:05:03 arch-server kernel: ACPI: PM-Timer IO Port: 0x808
    Mar 18 10:05:03 arch-server kernel: ACPI: Local APIC address 0xfee00000
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: IOAPIC (id[0x14] address[0xfec00000] gsi_base[0])
    Mar 18 10:05:03 arch-server kernel: IOAPIC[0]: apic_id 20, version 33, address 0xfec00000, GSI 0-23
    Mar 18 10:05:03 arch-server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Mar 18 10:05:03 arch-server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    Mar 18 10:05:03 arch-server kernel: ACPI: IRQ0 used by override.
    Mar 18 10:05:03 arch-server kernel: ACPI: IRQ2 used by override.
    Mar 18 10:05:03 arch-server kernel: ACPI: IRQ9 used by override.
    Mar 18 10:05:03 arch-server kernel: Using ACPI (MADT) for SMP configuration information
    Mar 18 10:05:03 arch-server kernel: ACPI: HPET id: 0x8300 base: 0xfed00000
    Mar 18 10:05:03 arch-server kernel: smpboot: Allowing 24 CPUs, 20 hotplug CPUs
    Mar 18 10:05:03 arch-server kernel: nr_irqs_gsi: 40
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcff90000-0xcff9dfff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcff9e000-0xcffdffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xd0000000-0xffdfffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
    Mar 18 10:05:03 arch-server kernel: e820: [mem 0xd0000000-0xffdfffff] available for PCI devices
    Mar 18 10:05:03 arch-server kernel: Booting paravirtualized kernel on bare hardware
    Mar 18 10:05:03 arch-server kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:24 nr_node_ids:1
    Mar 18 10:05:03 arch-server kernel: PERCPU: Embedded 27 pages/cpu @ffff88040f600000 s81664 r8192 d20736 u131072
    Mar 18 10:05:03 arch-server kernel: pcpu-alloc: s81664 r8192 d20736 u131072 alloc=1*2097152
    Mar 18 10:05:03 arch-server kernel: pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    Mar 18 10:05:03 arch-server kernel: pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- --
    Mar 18 10:05:03 arch-server kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4064026
    Mar 18 10:05:03 arch-server kernel: Policy zone: Normal
    Mar 18 10:05:03 arch-server kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
    Mar 18 10:05:03 arch-server kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Mar 18 10:05:03 arch-server kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340
    Mar 18 10:05:03 arch-server kernel: Checking aperture...
    Mar 18 10:05:03 arch-server kernel: No AGP bridge found
    Mar 18 10:05:03 arch-server kernel: Node 0: aperture @ 0 size 32 MB
    Mar 18 10:05:03 arch-server kernel: Your BIOS doesn't leave a aperture memory hole
    Mar 18 10:05:03 arch-server kernel: Please enable the IOMMU option in the BIOS setup
    Mar 18 10:05:03 arch-server kernel: This costs you 64 MB of RAM
    Mar 18 10:05:03 arch-server kernel: Mapping aperture over 65536 KB of RAM @ c4000000
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
    Mar 18 10:05:03 arch-server kernel: Memory: 16106196K/16514232K available (5183K kernel code, 859K rwdata, 1640K rodata, 1128K init, 1300K bss, 408036K reserv
    Mar 18 10:05:03 arch-server kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
    Mar 18 10:05:03 arch-server kernel: Hierarchical RCU implementation.
    Mar 18 10:05:03 arch-server kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=24.
    Mar 18 10:05:03 arch-server kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
    Mar 18 10:05:03 arch-server kernel: NR_IRQS:8448 nr_irqs:872 16
    Mar 18 10:05:03 arch-server kernel: spurious 8259A interrupt: IRQ7.
    Mar 18 10:05:03 arch-server kernel: Console: colour dummy device 80x25
    Mar 18 10:05:03 arch-server kernel: console [tty0] enabled
    Mar 18 10:05:03 arch-server kernel: allocated 66060288 bytes of page_cgroup
    Mar 18 10:05:03 arch-server kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Mar 18 10:05:03 arch-server kernel: hpet clockevent registered
    Mar 18 10:05:03 arch-server kernel: tsc: Fast TSC calibration using PIT
    Mar 18 10:05:03 arch-server kernel: tsc: Detected 4199.946 MHz processor
    Mar 18 10:05:03 arch-server kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 8399.89 BogoMIPS (lpj=41999460)
    Mar 18 10:05:03 arch-server kernel: pid_max: default: 32768 minimum: 301
    Mar 18 10:05:03 arch-server kernel: ACPI: Core revision 20131218
    Mar 18 10:05:03 arch-server kernel: ACPI: All ACPI Tables successfully acquired
    Mar 18 10:05:03 arch-server kernel: Security Framework initialized
    Mar 18 10:05:03 arch-server kernel: Yama: becoming mindful.
    Mar 18 10:05:03 arch-server kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    Mar 18 10:05:03 arch-server kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Mar 18 10:05:03 arch-server kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    Mar 18 10:05:03 arch-server kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys memory
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys devices
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys freezer
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys net_cls
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys blkio
    Mar 18 10:05:03 arch-server kernel: tseg: 0000000000
    Mar 18 10:05:03 arch-server kernel: CPU: Physical Processor ID: 0
    Mar 18 10:05:03 arch-server kernel: CPU: Processor Core ID: 0
    Mar 18 10:05:03 arch-server kernel: mce: CPU supports 7 MCE banks
    Mar 18 10:05:03 arch-server kernel: LVT offset 1 assigned for vector 0xf9
    Mar 18 10:05:03 arch-server kernel: Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
    tlb_flushall_shift: 6
    Mar 18 10:05:03 arch-server kernel: Freeing SMP alternatives memory: 20K (ffffffff819f2000 - ffffffff819f7000)
    Mar 18 10:05:03 arch-server kernel: ftrace: allocating 20141 entries in 79 pages
    Mar 18 10:05:03 arch-server kernel: Switched APIC routing to physical flat.
    Mar 18 10:05:03 arch-server kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Mar 18 10:05:03 arch-server kernel: smpboot: CPU0: AMD FX(tm)-4170 Quad-Core Processor (fam: 15, model: 01, stepping: 02)
    Mar 18 10:05:03 arch-server kernel: Performance Events: Fam15h core perfctr, AMD PMU driver.
    Mar 18 10:05:03 arch-server kernel: ... version: 0
    Mar 18 10:05:03 arch-server kernel: ... bit width: 48
    Mar 18 10:05:03 arch-server kernel: ... generic registers: 6
    Mar 18 10:05:03 arch-server kernel: ... value mask: 0000ffffffffffff
    Mar 18 10:05:03 arch-server kernel: ... max period: 00007fffffffffff
    Mar 18 10:05:03 arch-server kernel: ... fixed-purpose events: 0
    Mar 18 10:05:03 arch-server kernel: ... event mask: 000000000000003f
    Mar 18 10:05:03 arch-server kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Mar 18 10:05:03 arch-server kernel: x86: Booting SMP configuration:
    Mar 18 10:05:03 arch-server kernel: .... node #0, CPUs: #1 #2 #3
    Mar 18 10:05:03 arch-server kernel: x86: Booted up 1 node, 4 CPUs
    Mar 18 10:05:03 arch-server kernel: smpboot: Total of 4 processors activated (33599.56 BogoMIPS)
    Mar 18 10:05:03 arch-server kernel: devtmpfs: initialized
    Mar 18 10:05:03 arch-server kernel: PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes)
    Mar 18 10:05:03 arch-server kernel: pinctrl core: initialized pinctrl subsystem
    Mar 18 10:05:03 arch-server kernel: RTC time: 15:04:53, date: 03/18/15
    Mar 18 10:05:03 arch-server kernel: NET: Registered protocol family 16
    Mar 18 10:05:03 arch-server kernel: cpuidle: using governor ladder
    Mar 18 10:05:03 arch-server kernel: cpuidle: using governor menu
    Mar 18 10:05:03 arch-server kernel: ACPI: bus type PCI registered
    Mar 18 10:05:03 arch-server kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 18 10:05:03 arch-server kernel: PCI: not using MMCONFIG
    Mar 18 10:05:03 arch-server kernel: PCI: Using configuration type 1 for base access
    Mar 18 10:05:03 arch-server kernel: PCI: Using configuration type 1 for extended access
    Mar 18 10:05:03 arch-server kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    Mar 18 10:05:03 arch-server kernel: mtrr: probably your BIOS does not setup all CPUs.
    Mar 18 10:05:03 arch-server kernel: mtrr: corrected configuration.
    Mar 18 10:05:03 arch-server kernel: bio: create slab <bio-0> at 0
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Module Device)
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Processor Device)
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Mar 18 10:05:03 arch-server kernel: ACPI: Executed 4 blocks of module-level executable AML code
    Mar 18 10:05:03 arch-server kernel: ACPI: Interpreter enabled
    Mar 18 10:05:03 arch-server kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    Mar 18 10:05:03 arch-server kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580)
    Mar 18 10:05:03 arch-server kernel: ACPI: (supports S0 S1 S4 S5)
    Mar 18 10:05:03 arch-server kernel: ACPI: Using IOAPIC for interrupt routing
    Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    Mar 18 10:05:03 arch-server kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Mar 18 10:05:03 arch-server kernel: ACPI: No dock devices found.
    Mar 18 10:05:03 arch-server kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Mar 18 10:05:03 arch-server kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    Mar 18 10:05:03 arch-server kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    Mar 18 10:05:03 arch-server kernel: PCI host bridge to bus 0000:00
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: set SATA to AHCI mode
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: supports D1 D2
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: System wakeup disabled by ACP

  • Macbook Pro 2011 won't boot, grey screen, 10.9.4

    Hi guy I hope you are all well,
    I have been running a 1.1 MBP Santa Rosa since 2010 and decided it was time for an update, so in January I got hold of a 2008 Penrhyn model. That was running Mavericks absolutely fine until 2 weeks after 10.9.3 when it began to have gfx crashes, kernel panics, refuse to boot etc. Now it won't even turn on, just a low fan noise for 10 secs then it switches itself off.
    I figured the Penrhyn was just too long in the tooth now and must have had dodgy hardware. Nothing I've made this year will now work on the Santa Rosa on Snowy so I decided to splash out on a mid-2011 Sandy Beach, 15.4" 2.0ghz i7. This has been absolutely great the last month, until the day I went up to 10.9.4. It began to crash and need rebooting when iPhoto opens after plugging in my iPhone. At first I disabled iPhoto's auto-open and the phone works fine with iTunes and charges when iPhoto is closed. Without the phone plugged in iPhoto worked fine. Inevitably I plugged the phone in last night while iPhoto was still open. The screen went a purple-pattern, I rebooted and now it won't boot past the apple logo and pie-wheel at the chime. It just goes to a grey screen.
    Recovery does not work, just a solid blue screen. Booting off a Lion install DVD also just gets a grey screen after the logo/chime. I cleared the PRAM, and the SMC three times. Starting in safe-mode the progress bar loads fine, but then it's back to grey screen.
    So I'm now back on my Santa Rosa, which has never had a fault, nor may I add have any of my PPC Macs!
    Anyone have a possible solution for this or know what the exact hardware-fault may be? I really don't want to pay Apple to repair it, having spent on over £1000 on MBPs this year that now don't turn on
    Many thanks, James

    I've been having similar issues with a late 2011 17" MBP with 10.9.4.  I haven't worked out what the problem is, but I'm eventually able to enter recovery mode after multiple (15-30) attempts.  Between attempts, I tried resetting the PRAM, entering safe mode, entering hardware diagnostics mode, and occasionally just leting it hang on the blue or grey screen.
    Repairing disk permissions fixes the problem.  It's happened twice now, with an hour or two of panic between getting it back up and running again.  It's only been since the 10.9.3 or 10.9.4 update, which other users have experienced problems with.  I didn't make a backup before updating (this is the first issue I've ever had with my machine), so I may have to start with a fresh install to determine if it's software or hardware.

  • Desperate, won't boot. Screen shows file folder with question mark??

    I'm out of applecare warranty. My PB G4 won't boot. All I get is a gray screen with a small file folder in the center that has a question mark alternating with a little smiling face. Does this mean that my hard drive is fried and the system can't find my OS X software to boot from?
    Is there anything that I can do to remedy this? I'm desperate. This post is being performed with a Dell using Windows

    If the drive appears in Disk Utility then it isn't dead. That you cannot repair it nor install the OS suggests that there's serious damage to the directory if not the partition table. If you haven't backed up recently and have data you really don't want to lose, it might be worth getting DiskWarrior to attempt repairing the drive or retrieving some data. No guarantees.
    Whether you do try that or not, eventually it's back to rebooting with the CD and returning to Disk Utility. Click on the erase tab. Do you have that option? If not, click on the partition tab and select 1 partition scheme and try that. If you can erase or partition the drive you will, of course, have erased everything.
    If you succeed only time will tell if the drive went south because of a hardware issue or software. So, were I you, I'd become very careful about frequently backing up the important info on your computer.

  • Pismo won't boot after screen replacement?

    I just replaced the screen on one of my Pismos with the iFixit guide. Now, when I hit the power button, I get the boot chime and I hear the fan whir, but that's it. No hard drive noises and nothing on the screen. It won't boot off another Pismo in TDM and the iBook doesn't see it if I try to put it in TDM. I've tried reseating the processor and the hard drive. Anyone got any idea what I did wrong? This was my first computer surgery, I really don't want to lose my patient...

    pikacane:
    I've tried reseating the processor
    I suggest trying it again as it is the most frequent cause of the kind of non-startup you describe. With the keyboard and shield removed, remove the RAM module in the upper slot. Lift off the processor card. Replace processor card and press down with thumb(s) on the side toward palm-rest until you feel/hear the card snap into place. Press hard, don't be shy, you won't break it.
    If you are satisfied you have the processor card is properly seated and it still won't startup, please post back and let us know.
    cornelius

  • HELP! MacBook Pro 17" Won't Boot-Grey Screen-Errors During Verbose Safe Mode Boot

    Booting regularly it hangs on the grey screen, if it does go into desktop, it freezes and won't do anything.
    I did disk check and repair even though it found no errors, and did verify and fix permissions since it showed a LOT of permission errors. Still won't boot into desktop though.
    Ran safe mode verbose and got the following disk0s2 I/O Errors-What does this mean??? Hard drive problem?
    I have reload OS X 3 times in the past few weeks because of freezing issues in Mavericks and stuck with Mountain Lion and it was running fine until I went to boot up this morning after a clean shut down and won't boot up ever since.
    http://i43.photobucket.com/albums/e389/RIPNHL2005/photo_zpsb0d8d5cf.jpg
    http://s43.photobucket.com/user/RIPNHL2005/media/photo_zpsb0d8d5cf.jpg.html
    Please help.....This is my main laptop and job search tool.....
    Thanks!!!

    Is this the right drive config for the macbook pro?
    Is Western Digital no good? Best Buy has them in stock.....
    HGST
    500GB Travelstar™ Z5K500 Hard Disk Drive
    2.5-Inch | SATA 3.0Gb/s | 5400RPM | 8MB Cache
    High-performance, high-capacity mobile storage for notebook PCs and other applications
    Low Profile - 7mm thickness for slim designs
    High Capacity - Up to 500GB
    Quiet Operation - Enjoy a richer audio-listening experience
    Travelstar Z5K500 is the second generation 7mm, 5400 RPM 2.5-inch hard drive from HGST, with capacities ranging from 250GB to 500GB, and the second generation Advanced Format drive. Advanced Format increases the physical sector size on HDDs from 512 bytes to 4,096 (4K) bytes, which improves drive capacities and error correction capabilities. The 500GB per platter, one-disk models are designed as a direct replacement for standard 9.5mm HDDs, for use in notebook PCs, external storage and gaming consoles, as well as new, thinner and more robust device designs. The Z5K500 carries the EcoTrac classification due to its low-power consumption and eco-friendly, halogen-free production. Travelstar Z5K500 delivers the right balance of capacity, power-management and design flexibility to meet the needs of mobile applications.

  • Imac won't boot - white screen

    Ok, so now my imac won't boot. All I get is a white screen; I also can't boot from install DVD.

    Hi David
    Try booting the Install DVD holding the Option key or run the Apple Hardware Test as described in the following Apple article > http://support.apple.com/kb/HT1509
    Dennis

Maybe you are looking for

  • Jabber connection to Presence server /softphone issue

    Hello community, Can i get some help with Cisco Unified Presence (8.6) working with Cisco Jabber for MAC (9.2.1)? So here is the scenario, we are currently moving away from Cisco WebEX, so i needed to configure our Cisco Presence server to be able ha

  • Line Chart query...having issues with finding the right SQL...tough query

    This initaial entry was much longer and confusing. I'm looking to make ar running total based using time periods...see the link in the last post to get to the demo.apex.com area. Rob Edited by: bostonmacosx on Feb 14, 2013 1:33 PM

  • Pretty Please Help me - Context Menu

    PS... this is not only a AS3 question, but also AS2 would work just fine... This is going to be a hard one to communicate, so I will have example files attached... How can I right click on a MC and have a custom menu, WHEN another movieclip is on a h

  • Why won't safari open pdf files???!?!?!?!

    just bought the new iMac and pdf files wont open. It's been updated to the newest software (which I don't know what it's running or how to find it, I'm a new mac user) Now, in Windows, my files automatically opened with Adobe and now... nothing. Plea

  • Installing XP home on a T21

    Hello all, I just inherited a T21, the hard drive has been replaced and I have tried to install XP home. After several attempts the install always stop at the same place. Any ideas?? Thanks