Upgraded to 2.0.1 and the top screen won't work with some of the apps

Ever since I upgraded to 2.0.1, when I open any of the applications the top part of the screen won't respond with some of the applications. I know that the screen is working and not damaged because on the main menu application prompt I can click into the apps on the top part of the screen, but as soon as I get inside some of the applications weather it be the ipod or texting the top part of the screen won't respond. Anyone else have this problem and have solution for the problem

I had a similar issue when I upgraded last night to 2.0.1...everything went fine no issues last night that I could see...though I didn't make a single call until this morning after doing the upgrade...went to call in to work this morning and couldn't hear them they couldn't hear me and there was no sound whatsoever...turns out that somehow the 2.0.1 update caused my iPhone to go into a staus where it though it had my headphones in all the time...this resolved by following the information on this support document ( http://support.apple.com/kb/TS1630?viewlocale=en_US ) finally was a reset of the iPhone (step #7) that seemed to resolve it for me...you might want to try this too.

Similar Messages

HT201406 IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even powe

IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even power if off. I can't access the hardward ID which Apple support seems to require for Chat.
It might have happened when I was accessing my camera bypassing the lock screen!
All I know is that the thing is now useless and it looks like I will have to wait for the battery to run down to see if powering it back up afterwards will solve the problem.

I have since discovered the "hold down home key and power button" together for a few seconds and this seems to have worked .... phew!

Itunes updated and now it won't work. I unstalled it and reinstalled the older version and it still won't open. Says the itunes library won't work with the older program. Help

Itunes updated and now it won't work. I unstalled it and reinstalled the older version and reinstalled a older version and it still won't open. Says the itunes
library won't work with the older program. Please help

It says it cannot removed the older version of iTunes.
Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.)

Still cant download youtubes even w/firefox and the addon that won't work with the current FF version

For all that FF is supposed to be for me it's junk. I've spent hours trying to solve the download problem with realplayer and youtube. Finally tried FF but one obstacle after another. The youtube downloader won't work with this latest version of FF. If I try to download other things I get the stupid pop up saying to download FF. Already have it dumb ass! Navigation on the forums is basically worthless.

yes it says it's not compatable with the latest ff

HT201406 What do I do if my Ipod touch 4 will turn on, but the touch screen won't work so I can't unlock it?

This has happened 3 times... my Ipod touch 4 will be fine one minute,but then the next time I turn it on the screen won't pick up when I touch the screen it wont pick it up. I can't unlock it or completely turn it off becasue the touch screen won't work, but I know it is still alive becasue when you press the home button my lock screen turns up. if you know how to fix this bug please tell me how.

Did you try to connect in recovery mode and set it up as new device?
iOS: Unable to update or restore
How to back up your data and set up as a new device

Music buttons on the lock screen no longer work with ios7.

on my 4S, when ios 7 was loaded, bluetooth music play buttons and the music buttons on the lock screen no longer work. Hence, I can neither use the music buttons at the lock screen nor can I use the control on my car (bluetooth...) to change songs. Volume adjust at the lock screen appears to work. Can't pause/play or move to the next/prior music.

I did see a reply on a similar post:
You can try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
However, some onther users have reported the same problem so it it may be a bug in iOS
I did the RESET DEVICE only to mine (i.e., did not reset all settings...) and it did work to fix the buttons (haven't tested on the car, but it'll likely be OK now...). Certainly there is a bug somewhere that needs fixed...

I'm working on my iMac PowerMac8,2 PowerPC G5 (3.1) 2 GHz machine and have been having problems with the computer shutting down unpredictably. After the problem becoming impossible to work with, I shut the machine down. Now a little better, but reoccuring

I'm working with my iMac PPC G5, PowerMac8,2, 2 GHz machine running OS X 10.4.11, and was having a problem for a while with the machine shutting down unexpectedly. There was no clear pattern to when it was shutting down as far as I could tell. For a while, it would also not restart when buttoned on.
I set the machine aside for a while, probably a month or more, and then got it back out after its rustication. It started up and runs significantly better than it had been, but I have noticed it shutting down sometimes now again, though not as frequently as before. Sometimes it runs for a good long time between active work, sleep mode, and active work again. Once in a while it does shut down when no one is working on it (while asleep). But now it always restarts when buttoned on.
I've done the thorough vacuuming of any dust from the unit vents. I wonder if there's anything else I should try. In most other ways the machine works pretty well and has become the family desktop for basic uses, so I'd like to keep it running if I can. A little frustrating to not be able to upgrade all programs (iTunes) to useable versions, but that's another story....
I would appreciate any ideas about the shut down problem.
TCC

Option 1
Reset your PRAM. Press and hold down the Command Option P R keys while starting your computer. You will hear the startup chime. continue holding down those keys until you hear the startup chime a second time. Release the keys. If the computer restarts, you will need to reset your Date and Time. It might be time to replace your PRAM battery. The G5 iMacs require a 3 volt CR2032 lithium watch/camera battery like below:
http://eshop.macsales.com/item/NewerTech/CR2032/
You can find these batteries at Walmart, Kmart, Target, most local drugstore chains, for between $3-$5, or at Radio Shack for $12-$20.
If you have any G5 iMac model EXCEPT the iSight version, you can probably do the battery install yourself. Watch this video on upgrading your iMac's RAM to show you how to remove the back of your iMac, if you don't already know how:
http://eshop.macsales.com/installvideos/imac_g5_mem_m/
While you have the back off, use a can of compressed air to blow the dust out the vents at the bottom of the iMac, the fans, and anywhere else you can. Also inspect the 28-30 capacitors on the logic board. Look for dark spots, if they look puffy or swollen, or leaks.
Option 2
Reset the SMC by removing all cables (USB, Firewire, Ethernet, Modem, Power cord) from the back of your computer. Let it sit for one minute. Press and hold the power on button on the back of the iMac while plugging in the power cord. Release the power on button. Count to five, the press the power on button again.
Option 3
Place your original, came with the iMac when purchased install disk, into the slot on the iMac, press and hold the C key while pressing the power on button on the back of the computer. (If you have upgraded your OS from when you purchased your iMac, example your iMac came with OS 10.3 installed, and you're now using OS 10.5, then use the OS 10.5 Retail Install disk that you had used to upgrade your OS instead of the original, came with the iMac disk.)
Continue holding the C key until you see the OS starting to load. DO NOT do an OS installation. At the top Menu bar, select Utilities or Utility, and pull down to Disk Utility. On the left side of the window that opens,select your normal OS drive. Click First Aid at the top middle of the window if it isn't already selected. Click Repair Disk from the lower right area of the window. When that is done, click Repair Permissions to the left of the Repair Disk button you clicked earlier.
When that is done, quit Disk Utility. From the top Menu bar (I think its under Utilities) select the Start Up Manager, and choose your normal boot volume as the startup disk. Restart the computer. If successful, and you've rebooted from your normal startup disk, eject the install DVD/CD, and you're good to go.
Good luck.

When I start-up my computer it has a Flashing ? in a Folder. I removed the HDD as then plugged it in via USB and it worked, but just won't work with it inside the Macbook.

So, I just had a bit of a hurried train journey, two connections very close together, resulting in my laptop bouncing around a bit inside my bag (in a case). The Macbook was shutdown the entire time, but when I tried to start it up it came up with a flashing folder with a "?" in the middle of it after the start-up "bong".
I proceeded to remove the hard drive to check if it was okay, and it worked fine via USB into my iMac, so I am now running my Macbook Pro from a hard-drive that is completely naked outside of its shell.
What could have gone wrong other than the hard drive, bairng in mind that it is all working perfectly well with the hard-drive plugged in via USB. I was thinking it could be the ribbon cable that connects the hard-drive internally, however I had this replaced not long ago after a previous complete hard-drive failure, but that's a story for another time.
If anyone could help I'd be very appreciative, as my macbook looks ghetto as all **** right now, as I have the hard-drive sellotaped to the left of my trackpad.

If Apple was the one that replaced the ribbon cable, return it. If not, run AHT (Apple Hardware Test).
Using Apple Hardware Test to troubleshoot a hardware problem
Your issues might be caused by a hardware problem. Running Apple Hardware Test can help you solve this problem by showing you the faulty hardware.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
Press the Power Button to turn on the computer.
Press and hold the D key on the keyboard before the grey starting screen appears.
Continue to hold the D key until the loading screen shows up. You should see a globe.
When AHT has loaded, select your Language and then press the Return (↩) key.
Select the Perform Extended Testing checkbox located under the Test button.
Press the T key, select the Test button, or press the Return (↩) key to start running the diagnostics.
Report any issues it shows in a reply.
I hope I helped.

Why the iPad internal speakers not working with some applications and key sound?

My iPad1 ' internal speakers not fully functioning. It is working with music and video, YouTube , but not working with applications such as games.
Also with key pad sound .
Please help me in this regard.

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Audio control in the lock screen won't work sometimes with third party apps. Has anyone else experienced this?

iPod touch 5. IOS 7

Hi Rspenia,
I am sorry to hear that your phone was damaged. I'd like to address your concern. Depending on how much damage was to the screen, it may need to be replaced. Was the issue with your screen fixed? Do you have insurance coverage on your device? If so and and you wish to replace the phone, you can file a claim online here http://bit.ly/07CrqPK. I hope this helps you with getting a working device and recovering from the broken screen issue.
Thanks,
EdW_VZW
Follow us on Twitter @VZWSupport

My volume won't work on some of my apps but works on podcasts and my music. What is happening

When I use my apps like I funny and tapped out or want to watch video clips there is no sound, but I can listen to my music and podcasts without any problem. I have tried restarting my iPad several times and it still does not work. Any suggestions?

Your system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

I am running Firefox 5, McAfee Site advisor is blocked. I contacted McAfee and they said it won't work with Firefox 5 and that I should use an ealier version of FF or use IE. Is there a patch coming to allow Site Advisor to work on FF 5?

As above McAfee apparently feels the fault is with FF. I will admit that under the latest 3 version it worked fine. I skipped version 4 because of some things a read about it. I did go with FF5.

The McAfee Site Advisor add-on is blocklisted by Mozilla due to that Site Advisor extension being the #2 cause of crashing the Firefox 5.0 betas. McAfee was notified of the problem long before that extension was added to the blocklist. Now it is up to them to fix it. <br /> https://addons.mozilla.org/en-US/firefox/blocked/ <br />
https://bugzilla.mozilla.org/show_bug.cgi?id=660111
I have read that McAfee is working on a re-written version that is projected to be available in the 3rd week of July.
Quite honestly, with McAfee taking the position that this problem is with Firefox or is Mozilla's fault, when that add-on has a long history of being [http://kb.mozillazine.org/Problematic_extensions PROBLEMATIC], I have lost the little respect I had for McAfee being a respectable, ethical company. ''Of course, my level of respect for McAfee was low to begin with due to problems I had with their software 10 years ago causing me to re-format my PC bi-weekly immediately after their security scans on a Win98 PC, and haven't used their stuff since once I discovered their software was causing my problem with lost video card drivers repeatedly.''

My iPod touch 3rd generation won't play on my iPod dock when the alarm I set goes off. It plays normally and charges, but it won't work with the alarm. Could it be the iPod dock or my iPod?

My iPod touch just recently started doing this: I plug it in to my Sony iPod dock/alarm clock/radio. It charges fine and plays music fine, but when I set the alarm for it to go off, it doesn't go off. I can see that the dock is indicating that the alarm is going off, but the iPod isn't playing music. Could it be my iPod or the dock?
Also, there were 2 times when I plugged in my iPod to charge (once with a wall charger and once with the dock) and it said that it was fully charged. But it wasn't fully charged. I bought one of those iPod wall chargers from Target. It's not an Apple charger, but it is for iPods. Could it be that?
I'm going to try to reset my iPod and see if that helps any.

I have contacted apple support and Bose support. When I have heard back will post for everyone. I do encourage everyone to contact both companies until we get an answer to hopefully solve this issue. The more people who contact them about the issue, maybe the better chance they will help fix the issue.

After installing 10.9.2(Maverik), Java will no longer work. I went to the java site and downloaded. However, the new java won't work with maveric either. What do I do?

After installing Maverick 10.9.2, Java will no longer work. I went to Java Site to install latest Java, but Maverick won't recognize it.

Java SE Runtime Environment 7 1.7.0_51

I rely on my BitDefender security and you say it won't work with 7, go back to Microsoft browser?

Firefox 7 apparently will not allow my BitDefender to run. I don't see why I have to select one or the other. Is my only option to dump Firefox and go back to the Microsoft browser?

Only the toolbar is not compatible with Firefox because BitDefender has probably not updated the toolbar. You can post on the BitDefender forum for confirmation about the toolbar, when it will be updated, etc. BitDefender should still be working in the background to protect you.
Firefox has a feature similar to the main function of most security application toolbars to keep you away from malware and phishing sites. I do not use the toolbar that comes with my security application, but instead depend on Firefox's '''''Safe Browsing''''' component.
*See --> http://www.mozilla.com/en-US/firefox/phishing-protection/
*'''''Sample''''' warning screens:
**http://www.mozilla.com/firefox/its-a-trap.html
**http://www.mozilla.com/firefox/its-an-attack.html
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Upgraded to 2.0.1 and the top screen won't work with some of the apps

Similar Messages

Maybe you are looking for