Upgraded to 2.0, now music won't play

Just upgraded my non-3G iPhone to 2.0. Two main issues:
1.) Purchased music no longer plays on my iPhone. All other songs (from CD, etc.) play fine, all other noise gets through, but purchased tracks will not play.
2.) Pandora app doesn't seem to want to start up. It installs, and when I activate, the startup window for Pandora shows up and then the app closes without any chance to input anything.
Any suggestions?

I'm having the same problem including movies that won't play. It'll play movies I created but nothing I've purchased. I'm on hold right now with iPhone support at 1 hour and counting...

Similar Messages

  • I upgraded my iPod Touch 4th Gen yesterday.  Now it won't play music, which is the main thing I use it for.  Over 11,000 songs [it's a 64GB model] -- will I actually have to restore the device and re-add all that music?

    I upgraded my iPod Touch 4th Gen yesterday.  Now it won't play music, which is the main thing I use it for.  Over 11,000 songs [it's a 64GB model] -- will I actually have to restore the device and re-add all that music?
    [Music files are still there, and I can play them on my computer directly from the iPod [just one track at a time] but not in the usual way, through headphones.]
    On the Summary page of iTunes for the iPod, it shows 50-plus gigabytes of "Other" content and no music, which was not previously the case.  I assume this is related to the problem.
    I can bring up individual tracks on the iPod and see cover art, but cannot play the music.

    iCloud is free, iTunes match is $25 a year.
    I had the same problem and when I went to Settings I had 0 songs, even though they were obviously still there since I only had 15GB free on my 64GB device.
    I decided to do a complete reset/restore of my 4th gen iPod Touch, Bad move! I've been messing with it for hours, and it simply won't restore--it keeps hanging on a black screen with an Apple logo and a progress bar at about 10%, sometimes it goes completely blank and tries again, with the same result. (I've posted my question/plea for help here: https://discussions.apple.com/message/19735862 )
    I'm ready to bang my head against the wall! I can put the device in recovery mode, connect to iTunes on my computer, and get it back to the setup screen, but when I go through the process again and try to do an iCloud backup I get the same reset/restore loop.
    I could start from scratch, but I really, really, really don't want to go through all of my hundreds of apps, reinstall them one by one, etc. etc. etc.
    I thought that once I started using iCloud, I didn't need to sync with iTunes anymore--guess I was wrong.

  • I upgraded to the latest iTunes 10.2.2.12 and now it won't play any music. I can do everything else, except play music. I'm on Windows 7. Any ideas?

    I upgraded to the latest iTunes 10.2.2.12 and now it won't play any music. I can do everything else, except play music. I'm on Windows 7. Any ideas?

    i had this problem and finally figured it out. all that you need to do is go to your start menu and click on computer. select your main drive, (local drive) c usually. Next open the users file follow by your user name file, which is just like it sound it is a file labled as whatever your name is as you have it on your computer. Then you open up the AppData file. Next open the Roaming file. After that open the Apple Computer file followed by the iTunes file. Now you should see the folder labled iTunes Plug-ins folder. Now just Delete that folder. After that go to your iTunes and play your music.
    If for some reason you don't see the AppData file you need to go to the upper left of your screen on select organize. a drop down menu will appear and you need to select folder and searc options. a small folder options window will appear. in this window you need to select the view tab. you need to select the show hidden files, folders, and drives bubble. now hit apply and then ok. that will allow the AppData folder to be seen.

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • I got the iphone iOS 7.1.1 update and now my music won't play and I can't download apps. Can I fix it?

    When i got the update at first the music would play while my headphones were in. I restored my iphone and now it won't play at all. I have tried to go in the settings for itunes and app store but it also won't load.

    Hi Jackson,
    Since you have already done a restore of your iPhone, I would suggest that you now try restoring your iPhone to factory settings, set it up again and test before you restore your content. This article describes the process -
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Note - It is important that you follow this stop:
    Use iTunes to back up your device and transfer and sync any additional content to your computer.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • I know it's a little late but I recently updated my iPod touch 4th gen to iOS 6 and now it won't play my music. It will play spotify and YouTube music but not my music. Everything else works fine but when I go to play a song it just skips to the next. Why

    I know it's a tad late, but I recently updated my iPod touch 4th gen to iOS 6 and now it won't play any of my music. It will play Spotify and YouTube just fine, but it won't play my music. It will just skip to the next a d the next and the next after a second or two without any sound. Please help! Thank you.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      

  • Updated itunes and now it won't play any of my music, updated itunes and now it won't play any of my music

    i updated my itunes, and now it won't play any of my music. i tried deleting it and reinstalling itunes, but it still is doing the same thing: whenever i click on a song, it looks like it's going to play (and my last.fm thing starts scrobbling it) but it just doesn't play the song, ever. it sits there, with the play button played. i am so frustrated with itunes, and i have no idea how to resolve this.

    Hi ryanmar,
    If you are having issues with audio playback in iTunes for Windows, you may find the following article helpful:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/TS1362
    Regards,
    - Brenden

  • HT5457 updated to 6. now music won't shuffle how do I fix this?

    How do I get my music (playlist) to shuffle.  I upgraded to 0s6 and now music does not shuffle

    Are you able to do the reset I described while the device is connected to the charger? If so, does it start? What happens then after you remove it from the charger, does the device power off? If so, then you need to make an appointment with the Genius Bar or your Authorized Apple Service Provider and have the hardware checked. It sounds as if the battery is failing.

  • I just downloaded ISO6 and now my music won't play. How can I fix this?

    I just downloaded ISO6 and now my music won't play. How can I fix this?

    Hi Jackson,
    Since you have already done a restore of your iPhone, I would suggest that you now try restoring your iPhone to factory settings, set it up again and test before you restore your content. This article describes the process -
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Note - It is important that you follow this stop:
    Use iTunes to back up your device and transfer and sync any additional content to your computer.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Upgraded to the latest Keynote (5.3 1170) and now videos won't play in presentation mode, only audio

    Upgraded Keynote on my home and work computers to the latest version in the AppStore and now videos won't play in presentation mode.  In edit mode you can double click and it will play in the editor.  This happens on both computers running the latest version of ML (10.8.4).
    Any help here?  Alread tried a reinstall of ML on one machine with no luck.
    Was previously running Keynote 08 (non AppStore version).  Tried creating brand new presentations in 09, no luck.
    -steve

    I had the same problem today in front of an audience with 300 people (MacbookPro OSX 10.10, Thunderbolt-VGA adapter, PPT 14.4.6).
    Here what I figured out so far:
    1. It happens when you have PPT open and connect to beamer afterwards
    2. You can resolve it (in my case) by quitting PPT and launching it WHEN connected to beamer
    3. Yet, make sure Mac does not go into sleep mode or you get a lock-screen in the waiting time. if you do so, you get back to square 1. quit PPT again 2. restart it.
    4. Also.... in one case I had to hit the volume control once to get the sound back even though movie was playing
    So in short: Connect to beamer first, then launch PPT
    I know it is only a symptom fix but it worked for me

  • I just upgraded to FF 4.o, had 3.X running just fine, the upgrade went fine, but now it won't open Firefox at all.

    I just upgraded to FF 4.o, had 3.X running just fine, Windows 7, the upgrade went fine, but now it won't open Firefox at all, it just loads and sits there and stops, but my task manager shows FF running in the background, I have tried reinstalling twice, no change, what is causing this?
    Processes is the only place it shows Firefox running, programs won't show it in Task Manager.

    Reinstall 10.6 again, but this time hold c boot off the 10.6 and erase the ENTIRE internal drive.
    You do this by selecting the drive makers name and size on the left hand side, not the slightly indented partition underneath it.
    If you erase and install 10.6 only into a parittion, say Macintosh HD, the you still have the hidden Lion Recovery Partition on the drive and it appears you already have 10.7
    In the MAS, hold option and click Purchases to redownload Lion
    FYI, you don't need to install 10.6 to reinstall 10.7, 10.7 can be reinstalled via the Lion Recovery, Command r boot.
    See this for more info
    https://discussions.apple.com/docs/DOC-3046

  • HT1386 Some of my music won't play on my iPhone

    Shortly after upgrading to the latest OS (7.0.2), I've noticed some of my music won't play on my iPhone.  I can see the songs but they have a red circle with a square inside it next to them and I can't do anything with them.  I have plenty of space and there's not "downloading from the iCloud" option. 
    Problem 2...some other people are having this problem and recommend wiping the music off my phone and re-syncing via iTunes but when I plug my phone in (or sync via wi-fi, either one) to sync, it hangs up on "waiting for changes to apply" and never wipes the music.  I've looked around at other complaints about this issue and none of the recommended "fixes" work.
    I assume this is going to require an OS patch of some sort.  What's the ETA on this and is there a way to get around it now?

    I have this problem too but all the songs that wont play arent downloaded from the itunes store theyre from another site

  • Most of my music won't play, and the songs have exclamation points.

    I upgraded my itunes, and now most of the music won't play, and they have exclamation points next to them. When I click on a song, it says "original file cannot be found" I clicked on locate, but I couldn't find it anywhere. Any suggestions?

    Hello, I too had this same problem. I was very lazy about going through EACH song trying to select & fish for it in a folder (I have a lot of folders total of 1,979 songs). I called Apple & they told me to go to my iTunes go to FILE scroll down then ADD FOLDER.. Since everything was just out of place & didn't know where to even begin I basically deleted ALL songs from my LIBRARY & then added each folder. It literally took me less than 20 minutes. Dont worry if you have your songs labeled a certain way (Artist, name of song, genre in iTunes) everything will go back to normal. Hope this helps as it helped me! I put it aside for 2-3 years! Good luck!

  • My music won't play on my ipod classic 160GB and it skips songs can anyone help me?

    My ipod classic 160GB won't play my music there is sound coming from it but the music won't play and it skips songs as well does anyone now how to fix that?

    Have you checked if your Earphones are working?
    Do you get the Music menu after the reset? (what is display on the Screen? song playing)
    Normally if you Reset the iPod, it will turn the shuffle mode off, but do check under setting that shuffle mode is off.

  • I bought a song on my iPod and I put it on my iTunes on my computer now it won't play on my iPod, I'm gonna punch someone I like my song that wouldn't play, how do I fix this?

    I bought a song on my iPod and I put it on my iTunes on my school computer (MacBook Air)  now it won't play on my iPod, I'm gonna punch someone, I like my song that wouldn't play. If you can help me kik me (becca_wuvs_you) or answer in the comments

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
      - Restore to factory settings/new iOS device.

Maybe you are looking for

  • Samsung Continuum Music Player- 5.1 Channel error message

    I have a Samsung Continuum.  Recently, when I use the Music Player application, when I press the 5.1 stereo sound I get an error message that states "5.1 channel can only be activated when sound effects are off."  I have no idea what sound effects it

  • Airport Extreme no longer see's Epson R320 Printer

    All of a sudden i cannot print through Airport, i have to plug into USB port on my Mac Pro. If I try to print over the network its shows my printer offline. Any ideas.

  • ITunes won't launch in Windows 8

    Recently bought a new laptop which came with Windows 8. I cannot get iTunes 11 to launch in Windows 8. Whenever I launch it, I simply get a completely white screen and Windows Task Manager reports it as "Not Responding." I have attempted to "Repair"

  • Error in compile

    Hello, I have a flash application built in flash cs5 and action script 3.0. When i try to compile it, it returns error. , Line 1 5005: Unknown error optimizing byte code. or ReferenceError: Error #1065: Variable UIProperties_icon is not defined. I ha

  • Physical Table (Dynamic Name) x Physical Table x Alias

    Hello, We are customizing the standard OBI Applications .rpd. but this question is in reference to OBIEE, hence the post here. I have no problems with Physical Tables and Alias in the Physical layer. It just happens that the standard OBI Applications