Upgraded to 29.0.1 on XP. Print preview shows but when I hit print it just "dings" and nothing else, no print. No dialog box apprears either.

Printing from all other programs works fine including Chrome and Explorer. Ever since my Foxfire browser was updated to 29.0.1 I have not been able to print webpages.
When I hit print the computer does an audible "ding" and nothing happens. Doesn't matter if I choose File>print, f10, <ctrl> P or "print" from print preview, same thing happens.
The printer is on-line and recognizable by other apps.
No dialog box appears so I cannot choose a printer.
When I hit page setup I only get "format & options" and "margins & header/footer".
Help!

Hi,
Thank you for your question. There are two things I would try. It is possible that the printer settings may need to be reset. [[Fix printing problems in Firefox]] or you Java may need to be updated. Check if they are up to date with [http://www.mozilla.org/en-US/plugincheck/ Plug in check]
[[Troubleshoot issues with plugins like Flash or Java to fix common Firefox problems]]

Similar Messages

My numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

my numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

Rebooted computer works now ok

My Canon MP620 just stopped printing text: it can print photos etc but when I send a word document (with a picture) it only prints the picture. Any ideas?

Hi Everyone:
I have a Canon MP620 printer connected directly into my Airport base station. So far it has worked perfectly - I can print any type of document over the network from my MacBook Pro.
Yesterday something weird happened. I have a resumé (as a word document) I was always printing but this time all that was printed was a photo and no text. I did a print preview and it looked fine. I converted to PDF and nothing was printed. I then created a brand new word document and again nothing was printed. I have no problem with images but for some strange reason no text can be printed. All that happens is that the paper goes through and comes out blank.
Any ideas?????
Thanks a lot in advace!

Hi,
Tried all the cleaning programmes and it still will not print...I am lost.

I cannot find my iPhoto upgrader in Finder...I was told to go to the Go menu and click on Utilities...this is not an offered option...and nothing comes up in the search box...

I cannot find my iPhoto upgrader in Finder...I was told to go to the Go menu and click on Utilities...this is not an offered option...and nothing comes up in the search box...I have upgraded to OS X Yosemite, downloaded the iPhoto app to go with it, and the iPhoto upgrader...just can't find the upgrader...

In the finder applications folder ==> Utilities -- double click the iphoto library upgrader and then launch iphoto 9.6.1
iPhoto '11 or later: About the Library Upgrader - Apple Support

I can print a test page from my Mac to my HP Officejet Pro 8600 but nothing else will print

Hi - I just recently had a hard drive crash and had to revert to an old Time Machine backup on my new hard drive to get my Mac back. Since getting back up and running I have been unable to get my Officejet Pro 8600 back online. My computer is wired to the wireless router but the printer is running wireless. My computer can see the printer just fine and I can even print a "Print Quality Diagnostic" report from my Mac to the printer from the HP utility. But nothing else will print. The firmware is up to date. I have tried resetting the printing system multiple times, rebooting the machine, etc... Nothing works. Any help would be appreciated.
If it helps, we were using a different printer the last time the time machine was backed up, so when we used that backup the old printer was showing, but I reset the printing system, so it shouldn't matter.
Thanks for your help!

Hello @Ryan221,
Welcome to the HP Support Forums! I see your hard drive recently crashed and now you are not longer able to print to your HP Officejet Pro 8600. I see you have reset the printing system with no success. Let's try a different approach:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. Click on the link below to begin the download and follow the on screen instructions:
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
I hope this helps, please let me know the outcome!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

When i try to print from LR 5 to epson pro 3880, my LR crashes and i can't print. any ideas?

when i try to print from LR 5 to epson pro 3880, my LR crashes and i can't print. any ideas?

What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages

Print preview shows me different colors

Hi, I'm Nevio from Italy.
I've bought a new MacPro and installed new Photoshop CC.
I've a big problem: when I have to print an image, print preview shows me the image but with different colors (there is a blue dominant and a different brightness).
I try to select another printer profile or document profile but there is no way to have the same image in the printer preview window.
How can i solve this problem?
(I also try to uninstall and re-install all the CC Software, the printer and all profiles but no solution yet)
Thanks
Nevio

Photoshop File> Print preview color has been flaky in the past, i wouldn't rely on it for color -- how does it print is the bigger question...
if it prints bad, how does your print profile SOFTPROOF

My iPad 3 running iOS 8.1 will not upgrade to 8.3. I have downloaded 8.3 but when I press install now and choose agree nothing happens for hours. Any help?

MY ipad3 running iOS 8.1 does not upgrade to 8.3. I have downloaded 8.3 but when I press install now and choose agree, nothing happens for hours. Any help?.

You are in the wrong discussion forum, but ok:
-- You say it is running 8.1 now, but your profile says 6.1.3, plse update your profile.
-- Did you download in Mac iTunes? or directly in the iPhone?
if in Mac iTunes: check the following Finder location: Startupdisk->Homefolder (yourname)->Library->iTunes->iPadSoftwareUpdates : the downloaded file should be there and be complete the extension should be .ipsw, if it is not there or not complete you should download again.
if in the iPhone: notice that the install phase and verifying phase and restarting phase need (good) internet connection.

I have an Iphone 4 using IOS 4.2.6 and need to upgrade to at least IOS 4.3 or better yet IOS 5. I have never received any update notcies. I understand upgrades are through Itunes but when I go to Itunes downloads there is nothing there.

I have an Iphone 4 using ios 4.2.6 and need to upgrade to at least ios 4.3 or better yet ios 5. I have never received any update notices. I understand upgrades are through Itunes but when I go to Itunes downloads there is nothing there. Help!

Thanks, I tried this and it didn't work. I have a windows xp computer and connected the iphone to it. When I click on the iphone link that comes up under my computer i only get my iphone photos. No other options come up.

Print preview ok but a field missing in print out

Hi Experts,
Recently we did an upgrade from 4.6C to ECC5.0 . We are facing a strange problem, one particular field ( along with value ) is not appearing in the print out
from a particular printer . Everything comes fine in the print preview and the print outs are also perfectly ok from all the printers except this particular printer .
The same printer gives correct output in the older version .
Could you please give any pointers to this issue ?
Thanks,
~Abap Lover

Hi
Could you please look at the style attached with the form maybe the extra field comes with a different font that is not installed in the ECC 5.0 version so it is replacing by some other font which is not there in the printer.
Hope that Helps
Anirban M.

Exporting a PDF so that non-printing objects show but don't print?

I've just spent a couple hours trying to find an answer to this in the forums, but can't. (The most frustrating was one thread where the original poster said, "I found the answer here," and gave a link that went right back to the main page of the forum. Argh.)
Okay, anyway ... what I need to do?
I've got a document with graphics that I want to show up on the pdf when I export it, but that--if a reader prints it--don't print.
The document looks like a 3-ring binder with "tabs" for each section--just like the real thing. But the rings and tabs go right up to the edge and look terrible when printed, and whose printer can print right at the edge of the paper, anyway? But the tabs work as navigational links while looking a the pdf, and the rings just make it look cool, so I WANT them in the pdf.
I've tried:
Turning the entire layer into a non-printing layer (one that "shows" but does not "print"). But when I export it to a pdf, it doesn't show up on the pdf to look at OR to print. So that doesn't work.
Using the Attribute option to turn each object into a non-printing object, but so far as I can tell, that doesn't do a thing, because they still print from the pdf.
Exporting with the "create pdf layers" turned on and off. Exporting with the "include non-printing items" turned on and off.
Basically, I've pretty much tried everything. I gather, from browsing the forums, that this is POSSIBLE, but can't for the life of me figure out what to do to make it happen. (Short of hiding the tabs' layer and creating an entirely separate PDF and calling it "Print version" which is not exactly what I want to do!)
Is there maybe some magical combination of ons and offs I need to select to make this whole thing work?
(And, seriously, am I the only person who thinks the supporting documentation is just dreadful? I can't find anything in any of the Help screens that even mentions this, much less explains how to do it.)
Any help is appreciated!!
--Deb

Partial progress...
The button option (and, I'm using CS3, by the way--I should have said that originally) does work in terms of showing on the pdf but not printing.
The problem is that it messes up the way the document looks.
I said it's designed to look like a 3-ring binder with tab-dividers between each section, and each tab has a hyperlink to take you to that section.
Now, when you've got a paper binder in front of you, the tabs stay in the same sequence, and often overlap a bit (which mine do). The problem I'm having, having turned all of them into buttons, is that when you click on any of them, it "jumps" to the front of the row, so that they don't "flow" in the correct sequence.
Am I explaining this well? You know, the top-most tab is at the top of the pile, the next one is always below it and above the third one, and so on ... you never see the second tab on TOP of the first one. I'm trying to get the document to act as close to a hard-copy binder as I can, and it did ... except the buttons keep jostling each other for attention...
I'm going to go play around with this some more now, but ... any suggestions? (Other than restructuring my tabs so that they don't overlap at all?)

Printer has paper, but computer says it is out of paper and won't print from web

I am having trouble getting the computer to recognize that the printer has paper. The printer will print copies that I put in it, but when I want to print from the web, it won't let me do it; it just tells me that the printer is out of paper. I printed a number of pages from the web yesterday with no problem at all. I have an HP Deskjet F2430.
This question was solved.
View Solution.

I was trying to print off some material I had looked up on the web. When I saw what I was trying to print was going to be 40 pages, I did not want to continue printing it, and I did not know how to stop the printing, so I just pulled out my paper from the loader thing. I have since put paper back in the loader, but now my printer will not print anything, and says I am out of paper. I have tried and tried to fix this problem, and I really need to be able to print stuff, so I am pretty frustrated with this. I am a senior citizen and will admit that I am not all that astute with tech stuff. I would certainly appreciate some guidance with my problem. Thank you very much.

When I try to print a photo from iphoto, I select the photo, click print and the preview shows there is a lot of the photo cut off. It also prints this way. How can I print the whole picture?

When I try to print a photo from iphoto, I click print and the preview shows a lot of the photo cut off. It also prints this way. How can I print the whole photo?

After selecting File > Print, a pop-up window should appear. Select "Customize" and this should take you back into a panel within iPhoto. Towards the bottom, you should see an option for "Layout". Select this option and choose the correct photo orientation.
Hope this helps!

Blank page sent to my printer..Print Preview shows my page as a .pdf (On Mac OS 10.5.8)

A blank page is sent to the printer. When I view the text page in Print Preview, the page is blank and it is a .pdf. The print feature works fine with other browsers. This suddenly occurred. One minute I was able to print...the next minute blank pages print. I have tried two different printers and both experience the same problem on Firefox. The plug-ins are up to date.
Thanks, in advance, for any help.

Slow down a bit and think this through.
CUPS on linux is nearly identical to CUPS on OS X - but there is no Mac-to-Mac Apple proprietary print sharing. Rather, on linux you are sharing the printer using standard printing protocols. Just like on the Mac (when using the standard protocols like Windows/SMB or IP printing), linux print queues expect postscript input. Try using a generic postscript driver from the mac.
And when you add the printer via Windows Printing or IP > LPD or IPP, you will need to know the queue name for that printer from the linux box. (one computer with one IP address can have multiple printers - so what's the additional address info to print to your desired printer? - queue name.)
HTH

Upgraded to 29.0.1 on XP. Print preview shows but when I hit print it just "dings" and nothing else, no print. No dialog box apprears either.

Similar Messages

Maybe you are looking for