Upgraded to 6.0.5 and now can't buy music

I mistakenly upgraded to 6.0.5 and now I can't buy music. Whenever I click on "buy song" I just get the colored spinning ball for hours. I have to force quit just to get out. Anyone have any suggestions?
g4 powerbook   Mac OS X (10.3.9)  

modified = jailbroken...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

Similar Messages

  • I upgraded to 4.3.3 and now my iPod touch music won't shuffle. When I press shuffle it keeps replaying the same song over and over.

    I upgraded to 4.3.3 and now my iPod touch music won't shuffle. When I press shuffle it keeps replaying the same song over and over.

    There are two arrows below the time a song is plays. One is circular (repeat) and the other has two arrows crossing each other (?). The one going circular needs to be pressed to turned it off.

  • I answered my secuirty questions wrong and now can't buy apps or reset my questions

    CoUtd any one help , I answered my secuirty questions wrong , so now can't buy any apps . I also can't reset the questions ? What shall I do

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (118320)

  • Just upgraded to 10.8.4 and now can't open canon raw files in photoshop cs5 with camera raw plug in 6.7

    i've just upgraded to os 10.8.4 and now i can't open canon raw files in photoshop cs5 with camera raw plug in 6.7 which worked perfectly prior to the upgrade....anyone else encountered this issue?

    Adobe's software is a mess in terms of the fact that it's sprayed all over the place and may not survive an OS upgrade.  Try reinstalling Photoshop CS5.

  • Upgrading to iTunes 7.6 and now can't burn any playlists

    Hi:
    I've finally upgraded to iTunes 7.6 and it now won't let me burn any playlists. When I try, it asks me to insert a blank disc, which I do, it then says checking media and then nothing. I've rebooted, uninstalled, reinstalled and still the same issue. Before I upgraded I had no problem burning a cd, plus after upgrading, I've tried to burn other things off of my computer and that all still works. Any suggestions?

    Having the same frustrating problem and have spent hours tryinhg to figure out. E-mail to iTunes support was pretty much useless and they finally advised me to contact an Apple Service Technician. If you find out, please post or let me know [email protected] Staples said for $40 they could fix. Hate to pay it. Thanks.

  • Upgraded to Adobe Reader XI, and now can't print to PDF.

    I recently upgraded to XI, and now the option to print to PDF no longer appears in my print dialog box.  Help!

    No version of Reader ever came with the PDF printer. Maybe you had Acrobat
    before?

  • Upgraded to 9.0.3 and now none of my music or videos show up in my library

    I keep my itunes directory on my F: external drive and it's worked without any issues for years. I just upgraded my itunes to 9.0.3 and now it can't find any of my music and I get these messages that says my ipod and iphone are synced with another iTunes library and says I must erase and sync. I noticed that doing this upgrade installed an itunes folder on my c: drive under the My Music folder. I don't want this folder there, as I want my music on the F: drive. Everytime I delete this itunes folder off the C: drive it gets re-created whenever itunes is started. The music on my F: drive is still there and when I bring up Edit->Preferences->Advanced, it shows the F: drive as my itunes media folder location. I've never had this problem with any of my past itunes upgrades. I don't know what to do. Please help me.

    When you upgraded, itunes should have put a copy of the itunes library database in a folder named *Previous iTunes Libraries* . If you upgraded itunes today it will show as
    iTunes Library 2010-02-28.itl
    Use these directions to get it back
    http://support.apple.com/kb/TS1967
    Since I am not sure of your setup, look for the "Previous" folder on both your C: and F: drives.

  • Just upgraded to 10.6.8 and I can't buy iphoto

    Last week I bought my Snow Leopard upgrade so I could upgrade my iphoto (and easily post higher resolution photos to facebook). I finally opened up the app store and it would only let me buy and download iPhoto 9.3.2, which requires Mountain Lion - thus i wasn't allowed to download iPhoto. How can I buy iPhoto 9.0, and not the latest version?
    Thanks!

    How can I buy iPhoto 9.0, and not the latest version?
    One way is to seek out a boxed version of iLife '11.
    You can find it at place like Amazon.
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U TF8&qid=1344722635&sr=8-1&keywords=ilife
    Matt

  • How much RAM can upgrade my Powerbook G4 with and where can I buy it?

    I would like to increase the speed/processing power of my Powerbook G4. Any advice on the following appreciated:
    1) What is the max RAM I can put into it? There seem to be problems logged on this discussion forum at 2GB by some users?
    2) Where can I buy compatible RAM - it is no longer available on the Apple store (neither UK where I live nor US)?
    3) are there any other upgrades I can make to speed up my Powerbook?
    My current Powerbook details are:
    Machine Name: PowerBook G4 15"
    Machine Model: PowerBook5,2
    CPU Type: PowerPC G4 (1.1)
    Number Of CPUs: 1
    CPU Speed: 1.25 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 768 MB - DDR SDRAM
    Bus Speed: 167 MHz
    Boot ROM Version: 4.7.1f1
    Graphics - ATI Mobility Radeon 9600
    Many thanks
    Mark

    Hi, Mark. Your Powerbook can use up to 2GB of RAM, and there is no increased risk of trouble when using the maximum as long as the RAM used is suitable. Suitable RAM can be ordered from scores of online vendors. I don't know what the best sources in the UK might be, but I suggest that you look for Samsung, Crucial, or Hynix branded RAM from a vendor whose web site explicitly advertises it as compatible with Aluminum Powerbook G4s.

  • I changed my apple Id and now can't buy stuff for the app that I downloaded under my old Id how do I buy stuff with my new id

    I had a old apple id that I downloaded a app. Now I changed apple ids and want to buy something on the app and now I can't.
    Is there a way to do so without deleting my app and re downloading it

    Go to Settings>Store (or iTunes and Appl Store) and sign out and sign back in. If problem go to Settings>iCloud and make sure you are signed into the new iCloud account. You may have to create a new iCloud account.

  • Upgraded to 10.6.8 and now can't import photos from Olympus camera

    1. Recently bought a new Olympus VR310 digital camera.  I couldn't get either Image Capture (6.0.1) or iPhoto (9.1.5) to import images from day one, onto my Mac Mini running Snow Leopard 10.6.8.  However, if I took the SDHC card out of the Olympus and put it into an older  Canon Ixus digital camera , and used that to upload, then both Image Capture and iPhoto worked perfectly.  So it's not the card.  Or the USB connection.  It's something special to the Olympus and the Mac.  Obviously I tried all the usual stuff about dumping plist files etc.  Nothing worked.
    2. The problem manifests itself, when the Olympus is connected,  as Image Capture being unable to show more than one, if any, thumbnails, and it is unable to import at all.  In iPhoto the problem manifests immediately it calls up the Olympus as a connected camera.  The dreaded spinning beachball of death kicks off, and the program 'stops responding'.  Even after I quit iPhoto and unmount the Olympus, iPhoto will not open without the spinning ball of death until I restart.  
    3. Anyway, I tried connecting the Olympus to my son's Macbook, (System 10.6.7, Image Capture 6.0.1 and iPhoto 9.1.1) and all worked perfectly.  Hmm… so it's NOT just down to the Olympus.  It's something to do with my setup. 
    4. I also have a bootable USB drive connected to the Mini, so I booted into that, so I then have my computer and my user preferences etc running under the bootable drives System 10.6.6, Image Capture 6.0.1, and iPhoto 9.1.5.  That worked perfectly with the Olympus too.  So it's not my the combination of my user settings, Image Capture 6.0.1, or iPhoto 9.15, or the  Olympus.
    5. My guess then was it was some corruption of the system on the Mac Mini.  So I reinstalled the Mac Mini system, from the install DVD, so I had a nice fresh Snow Leopard 10.6.0.  That gave me Image Capture 6.0.1 and iPhoto 9.1.5.  When I attached the Olympus, everything worked perfectly.  Great.
    THEN, I updated the system from Apple's Oftware Update, all the way to 10.6.8, which is where I started from. 
    6. And guess what.  Nothing works anymore. Immediately before the update, the Olympus importing worked.  Immediately afterwards it didn't.  I'm back where I was at the beginning, with exactly the same problem..  I can't import from the Olympus but the Canon is fine. (see 1 and 2 above)
    So, it seems to me that the Upgrade straight to 10.6.8 is what caused the problem.  And given I could get the Olympus to work on my son's computer (system 10.6.6) it's something between 10.6.6 and 10.6.8.  Why the Canon works on all the permutations, and not the Olympus, I don't know.  I don't know why the  Olympus ONLY doesn't work with 10.6.8.
    7. Obviously there are tedious workarounds (but none that lets iPhoto capture the photos directly) which I can use to get the images into iPhoto eventually, but hey, this is an Apple Mac, who wants to be doing tedious workarounds all the time.
    I've had Macs since 1984  (I'm that old…) so I'm a fan, and I'm reasonably competent, but this has me stumped.
    Any ideas, anyone. 
    Any help much appreciated.
    Ian Waterston

    You launched iPhoto and from its Preferences you selected Connecting camera opens.....

  • Upgraded to 10.5.8 and now can't see either of my networked printers

    Hello all, I just upgraded my G5 dual 2.5 to 10.5.8. I have two printers that are both connected to separate Airport Extremes. My G5 ethernet port is connected to a linksys WET11 wireless ethernet bridge, which is in turn connected to the wi-fi network of the main airport. Here is my problem. I can surf the web just fine, so clearly my G5 is seeing the Airport. However ever since upgrading to 10.5.8 I can't add either of my networked printers in the printer setup. It just doesn't see any printers. I've reset the printing in the OS (control clicking on the print prefs and resetting followed by reboot) I've rebooted both the printer and the airport separately and I've double checked that the printer is set as a shared printer in the airport admin software. My laptop (an ibook g4) also running 10.5.8, has no problem seeing both networked printers and printing to them. I'm flummoxed as to why my tower suddenly can't. (It could see both with the exact same setup running 10.4.11) Any ideas? Your help is greatly appreciated, since this is very frustrating! thanks,
    -Andrew

    Your network setup is a little complicated. Can you explain it a little better and confirm that there's only one DHCP server in it - all devices get IP addresses from one of the Airport Extremes, for example?
    It sounds like maybe you have two or more separated subnets.

  • Upgraded to 10.6.7 and now can't connect to wireless.

    Hi,
    I'm not the most experienced when it comes to this type of thing so I will try and be as detail as I can so that someone may be able to provide me with a solution.
    I have a 13"  MacBook (about 4 years old) and recently increased my RAM from 512mb to 2gb and installed Snow Leopard which connected to the internet fine, but I then performed some Software Updates so the system is now 10.6.7 and since then I haven't been able to connect to the internet. My router shows up in the click down menu for airport but it tries to connect for about 7 seconds and then says "Connection Timed Out", I can get on the internet perfectly fine on other computers and from my iPhone so I have no idea why the MacBook can't connect. My router is a "Belkin Adsl Modem with wireless-G router" model FSD7632-4 version 1000uk.
    If anyone needs anymore information I will try and give it to you.
    Many Thanks

    I see you already have a correct answer, but you should try to avoid not having a secured network. My first advice would be to at least filter the MAC adresses of your know devices if your router support this feature. My second advice would be to try to secure your connection with WEP instead of WPA/WPA2, it is not as secure as WPA, but it is much better than no encryption and will probably work with all your wireless devices (my experience).
    Cheers.
    J.B.

  • I upgraded to 31.3.0 and now can not receive e-mails, even though I can send them.

    Have used Thunderbird for years, but have not been able to receive e-mails for two days since the upgrade. Able to send e-mails, but not receive. Tried deleting e-mails for last few days on server and on Thunderbird, but no change. Tried deleting saved password on Thunderbird, but it only asked for new password when sending e-mail, but does not ask for password for receiving. Tried re-installing Thunderbird, but no e-mails received.

    I solved the problem by changing Account Settings / Server Setting changed the port to 995 (default was 110) and the security to SSL. (Not sure how the upgrade changed these settings).

  • Moved and now can't find Music Store

    I recently moved and after reassembling my system using comcast cable as I did before I get an error message stating that the music store can't be opened because my network settings are wrong. Comcast moved my email account and I have no issues with email or internet access. Any suggestions???
    Kevcor

    I just used Music Rescue (google it) to recover my music from my two iPods. It was about $18 and totally worth it - and easy!

Maybe you are looking for