Upgraded to 6 now having major issues

After upgrading my Iphone 4 to Ios6 my phone keeps shutting down applications while using them and the phone is burning up the battery have to charge it several times a day with limit usage. I already tried the restore process but I am continuing to have the same problem any ideas?

If it helps, it is Apple's issue not the carrier. I live in Canada and my carrier is Bell Canada. I started having network problems last night while at work. The network connection just disappeared, and on the rare occasion it would appear again, it was gone again soon after. This morning I called the carrier and they told me that many random iphones are doing this. Right now I have service so I can post this (coincidentally), but for how long?

Similar Messages

Why am I NOW having major issues watching YouTube videos using WiFi vs Ethernet?

Why am I having major issues watching YouTube videos when the cable modem is connected to Airport Extreme, but they work flawlessly if my computer is connected directly to the modem? Comcast is the internet provider. 2.16 GHz Intel Core 2 Duo is the iMac. Getting the dreaded "This video is currently unavailable" OR "An error occurred. Please try again later." I swap back and forth... it's unbelievable. Videos that give errors over WiFi play fine when hooked up via ethernet.

If your wireless connection is slow, video streaming will stutter or fail completely. The wireless connection can be slow if there are other wireless networks in your area, all competing for the same limited number of wireless channels.
If you have a fairly new Extreme, you can use 5 GHz. Your iMac is capable of using it, and this will mitigate the effects of wireless interference.
Keep one thing in mind - if in the course of troubleshooting you have been routinely disconnecting and reconnecting your Extreme and the iMac to your modem - "swapping back and forth" as you described - be sure to power down the modem first. Most cable modems will refuse to communicate with a different device, until after you reset it by powering it down. If you want to compare wired speeds to wireless, connect your iMac to one of the Extreme's LAN ports instead, and turn off the iMac's wireless in its WiFi menu. Its speed should be nearly identical to that you will have by connecting it directly to the modem. Swapping connections in this manner does not require a power down cycle.

I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?

I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?

Try this repair, ensure you complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote, use Appcleaner from Mac Update to           do this, its freeware
2 restart the Mac;   Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
         let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and           click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
Please report back to let us know if this helped.

Having major issues with InDesign CS6. will upgrade fix???

Having major issues with InDesign CS6. Not only is it crashing, but it is corrupting the existing file. Then when I relaunch, it is not allowing me to open the file again.
In another instance, yesterday I opened an file created 3 months ago and it allowed me to make changes, however I could not save them to the existing file, or not even to a new name.
I had to copy each layer on each page to create a new document. NOT GOOD!!! Just saw that ADOBE has an update for InDesign. WILL THIS FIX THE PROBLEM??

Yes, I would certainly get the latest update. That we often solve issues like these, for this is not normal. Some further tips would be quite InDesign, then to trash your InDesign preferences and then re-start InDesign (it will rebuild them again). Some further areas to look into would be:
* Corrupt Font(s) (or corrupt font caches - see below)
* Corrupt Image(s)
* Power Failures (power surges)
* Placing images via drag-and-drop from an Internet page
* Working on an InDesign file over a network or on a remote server
If all else fails, we as Markzware (I work for them) also offer a Service to fix corrupt InDesign documents. See:
http://markzware.com/support/faq/recover-bad-file-service/
Hopefully this helps you.
David Dilling of
Markzware

Having Major Issues with Flash Player

Using IE 8, 64 bit, flash player 11.4.402.287
Having major issue with flash player! can not play a lot of games on FB. Games tell me that i need to update my Flash Player, PC says I have the latest version installed already.Ok, thought i would uninstall/reinstall...no go. Will not uninstall, says I need to close IE...which none are open. This issue has been going on for weeks now. I have done everything the help said to do and still not working. I need HELP!

im using the recent adobe flash player
windows XP, internet explorer, 10.045.2, 32bit
im not sure how this works, but im sure all that is correct:)
if you need additional infomation, just let me know

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

Having major issues with InDesign CS6

Having major issues with InDesign CS6. Not only is it crashing, but it is corrupting the existing file. Then when I relaunch, it is not allowing me to open the file again.
In another instance, yesterday I opened an file created 3 months ago and it allowed me to make changes, however I could not save them to the existing file, or not even to a new name.
I had to copy each layer on each page to create a new document. NOT GOOD!!!

SherwoodGirl wrote:
Having major issues with InDesign CS6.
Then post your qeustion on the Adobe forums is it's their software you're having problems with:
http://www.adobeforums.com

Anyone else having major issues with 1.1.4?

So I updated to Firmware 1.1.4 a day or two after it came out and I've been having major issues. This is on a phone purchased on launch day that has not been jailbrokened or hacked in anyway.
Battery life...when the phone actually works, is down drastically. I went from 2.5 days with Bluetooth and Wi-fi on to about 12 hours at one time.
Wi-fi...when it works, just cuts in and out even when the signal should be all full strength.
Clock...even though it is set to sync with network time, can be accurate one minute and lags behind as much as 15 minutes.
I've done numerous restores, both from a backup file and setting the phone up as a new phone. Nothing seems to fix the problem so far. Has anyone else run into these issues and/or know of how to fix it.
I was contemplating downgrading the firmware to 1.1.3, but I don't believe there is an official way to do it.
Any input would be appreciated.

I have exactly the same issues, After the Update the sound quality of my calls dropped drastically! I tought first I got a cold or something like that...but it was not I cannot hear as clearly as I used to before and increasing the volume does not solve anything!
I also noticed that trsitionning from an application to another and especially using the home button to got to home page is getting slower. I need more time to lose safari and go to emails than before.
My Memory usage is exactly the same as I havent added anything to my library or so. Aroud 3.5 GB free.
Anyone with same symptoms?

Am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it

i am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it still doesnt work it just asks me “slide to power off” please someone help me i just cant seem to put my ipod in DFU mode

To get the iPod in recovery mode and DFU mode you first have to turn the iPod off.
Just what is the problem you are tying to resolve?
Sometimes you have to let the battery fully drain if you can't turn the iPod off. After charging for at least hour try again.

I downloaded Yosemite last week, having major issues with typing

dw yosimite last week and have had major issues with typing, cursor leaving page

Hi KevinfromGeneva,
Welcome to the Support Communities! Are you working with a wireless keyboard or mouse, or are you having issues with a trackpad? The article below offers general troubleshooting tips for issues with these input devices:
Troubleshooting wireless mouse and keyboard issues - Apple Support
Cheers,
- Judy

Upgraded to yosemite and now having password issues and slow start up

I have upgraded my macbook pro to the OS X Yosemite operating system and now encountering start up and password issues.
Previously on start up my system would go to the log on icon within 10 to 15 seconds of pushing the on button. Now there is horizontal loading indicator bar appearing and takes about 30seconds to 1 minute to go away before getting to the log on screen and if I click on my icon the system goes live on screen without having to put in a password which is an obvious security issue.
I have tried adding a password however each time I try to put my old password in it tells me it is the wrong one.
I am operating Yosemite 10.10.2 on a macbook pro with 8gb memory with i7 processor..
The computer was running perfectly ok before this up grade so I had resisted previous prompts to upgrade due to the bad press this system was getting last year. I thought Apple would have had this all sorted by now??
I would appreciate any help if anyone knows how to resolve these issues.

Install the version of Java they want from here: Java for OS X 2014-001
See if CS 5.1 launches.
If not reinstall CS5.1 and any updates.
Gene

IMac 20" Mid 2007: Upgraded to 10.6.4 - Now having display issues

Recently, I upgraded my iMac from Tiger to Snow Leopard. I purchased a box set from Buy.com that included Snow Leopard, iLife '09 and iWork '09. Didn't seem to have any trouble with any of the installs. However, now I'll be working on the machine and all of a sudden my screen will go either black, white, fuzzy lines, or vertical lines. I would say 90% of the time the screen goes black. I can't bring it back without pressing and holding the power button down to do a hard reboot.
I've reset the SMC and the PRAM. Doesn't seem to help.
I have 2GB of RAM on this machine and didn't really have a problem until the upgrade. Any ideas on how to fix this problem?
It's becoming more and more of a problem.
Thanks!

Ok... took some time to further research this issue. Didn't find much in the way of concrete diagnosis until a friend of mine who is a fellow Mac user. Here's his situation: He had the iMac white model that was released right before mine (the first released aluminum model). He said he had recently upgraded his iMac to Snow Leopard using the same box set product (Snow Leopard, iLife 09, iWork 09) that I purchased for upgrading my Mac. He then described to me exactly what my computer's symptoms (lines in the screen, system freezes, black screens). He said then that his graphics card finally just fried (which was attached to his montherboard) so the repair cost would have put him at about $600. I quickly backed everything up on my hard drive and then reinstalled Tiger this past weekend. Haven't had a single episode. I'm just really bummed out now because I can't run iLife 09. Someone has GOT to have a solution for this by now. From what I'm now hearing this is a pretty widespread issue.

Upgraded to 10.6.7 and now having various issues with Appleworks Drawing program.

HELP...I just upgraded to 10.6.7 and now my Appleworks drawing program is slow - beach balls all the time, I can not copy into other programs, copy and paste messes with the formatting, fills and lines disappear, Fonts are messed up when copied...ON and ON..I Installed rosetta from the 10.6.7 install disk but still no luck. Any advice is appreciated, I am in a crunch with drawing deadlines an no time to learn another drawing program..Yes I am old school.and HELP!

You could look at EazyDraw: the version on the website is $95 download, $139 box and manual: it will open ClarisWorks drawings and is a powerful vector drawing program which makes a good replacement for Appleworks.
There is a much cheaper version in the Mac App Store but note that this version does not open AppleWorks documents.

I'm having major issues with iphone 5 wi-fi after upgrade to ios8

Ever since upgrading my iphone 5 to IOS8 my wi-fi becomes really slow or completely unresponsive. I try restarting phone and routers which does help short term, but then they become slow again.

settings - general - reset - reset network settings - you will need to re enter known wifi password again.

Having major issues with update 8.2 for my iPad 2. Can I undo upgrade?

JJust upgraded to 8.2 for my iPad 2. Huge problems! Slow, freezing pages. Cannot use my locaL public library web site. Keeps moving me out of web pages, etc. Can I undo this upgrade?

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

Upgraded to 6 now having major issues

Similar Messages

Maybe you are looking for