Upgraded to 7.1mbps, but am getting same speed as before.
Well here is my issue. I upgraded to 7.1mbps on a westell 7500 routed model number A90-750015-07 and I am on software version 5.001.00.02. It took almost 3 weeks to get to this speed, 3 weeks way to long. I finally got the upgrade and The speed on the routers page says 7668mbps, but I am still stuck at a little less then 3mbps, same as it was before the upgrade.
The gentlemen on the phone advised me to "disable my firewall and run a virus scan..." But I am a computer technician so I work with computers all day everyday, and it would seem as if this is on Verizon end, but as with the upgrade I get the runaround 100% of the time.
I told him that on speakeasy's speedtest, speedtest.com, and via downloads I get topped off at about 250kbps. Long story short, with the information given thus far, it has to be verzion, correct? And how can I fix it?
#1 Is Wireless is the westell 7500 routed model number A90-750015-07 enabled?
#2 If so, what level of wireless security is used?
#3 How many computers are behind this router?
#4 Besides your computer(s), is there anything else connected to the router? Xbox, Play Station, Wireless Access Point, Another router...
^^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.
Similar Messages
-
I was trying to upgrade to itunes 10.x on Windows 7 Pro. The installation stuck at the stage "Registering iTunes automation server". I removed the Antivirus software and re-install iTunes again. But still get same problem. Any solution?
JAPeter Hah
After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
Look out for "japiohelp".
In short:
a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
b) enter "netsh winsock reset" and pres enter
c) reboot the computer
and Bob's your uncle.
P. -
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
when syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen. have done the reset and restart, but still get same thing. Ipad does not show up in itunes even though cable plugged in. Have shut down and restarted Windows 7 computer.
I had done all of that to no avail. I did call Apple Tech Support and after he suggested I try a USB port in the rear of the Win 7 computer, things starting working again. I had tried switching the USB port at the front of the machine but that had not helped. Everything is good to go again. thanks for your reply
-
iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I have uninstalled in correct order and reinstalled but still getting same error message. Any help??
Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Upgraded to ADSL2 now get slower speeds than befor...
Hello
Well last Tuesday my line was upgraded to the 20mb ADSL2 and I was looking forward to some increase in bandwidth (even though before the upgrade my line was pumping 7mb most of the time which I was happy with)
Now for some reason I am getting slower speeds than before I upgraded. Something tells me I should not have bothered with the amount of effort it took to get the upgrade.
I cant understand why my DL is saying 3000+ and before upgrade it was reading 7500+
I have not reset my hub manually all disconnections have been done automatic.
Here are my router stats and I have been reading a few posts and I am hoping someone can shine some light on this for me:
BT Home Hub - DSL Connection
DSL Connection
Link Information
Uptime:
2 days, 0:36:48
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
687 / 3,347
Data Transferred (Sent/Received) [MB/GB]:
177.59 / 3.69
Output Power (Up/Down) [dBm]:
9.5 / 0.0
Line Attenuation (Up/Down) [dB]:
14.5 / 28.0
SN Margin (Up/Down) [dB]:
12.5 / 19.0
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
2 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
17 / 0
FEC Errors (Up/Down):
0 / 0
CRC Errors (Up/Down):
0 / 97
HEC Errors (Up/Down):
0 / 96
Line Profile:
Fast
Software version: 6.2.6.H
Solved!
Go to Solution.That's good to hear
Enjoy the speed
-+-No longer a forum member-+- -
I have been trying to download films on my I Pad but receive a message saying insuficient storage space, update. I updated a d paíd for extra space but still receive same message and cannot download the films. Any suggestionx
The message is referring to not having enough space on your iPad, not to not having enough space in your iCloud account. Purchasing additional storage in your iCloud account does not give you more available space on your iPad.
You can check how much space you have available on your iPad by going to Settings>General>Usage. If you don't have enough, you'll have to delete or sync some data off your iPad to free up additional space. -
Photo's are offline but in the same folder as before
Hello ppl,
My English is not verry good but I'll try to descripe my problem:
I use Lightroom for about 1 year, yesterdag I have re-installed my iMac and backupt the " Lightroom 2 Catalog.lrcat " and the " Lightroom 2 Catalog Previews.lrdata "
Also all my photo's who are stored in my Pictures folder on my iMac. They were sorted by Lightroom by date. So I have a folder 2009 and a folder 2010 with more folders with the exact date inside the year folder and in that folder the original RAW photo.
Now I have put the 2009 and the 2010 folder back to the same location as before re-install. Now I see all my photo's in LR like normal, but when I zoom in it says the file is missing/offline...
The only thing that I have changed is my Profile name. Before it was " iLucas " and now " Lucas " .. So maybe LR can't find the RAW foto's because it's looking for users/iLucas/pictures/YEAR-folder instead of users/Lucas/pictures/YEAR-folder..
I really want it back as it was before re-installing. Who can help me?
Thank you very much!
LucasYes I found it!
THANKS!! -
I ran into erro 3241 when you run RESTORE FILELISTONLY statement in SQL Server 2008 R2.
Found the hotfix
Cumulative Update 13 for SQL Server 2008 R2 SP1.
I have installed this hotfix, now running 10.50.2876.0
But I still get the same error when trying to restore a backup.
What else do I need to do?second to what bodo said Instead of installing SQL server 2012 SP1 CU13 it would be better to install
SQL Server 2008 r2 Sp2 SP's are more throughly tested and would include all fixes for CU and Sp1
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
Each time I try to download Adobe Air, I keep getting an error pop-up stating that I need to go to adobe to get a newer version. Each time I attempt to do this, I receive the same error. I'm able to get to the point where Adobe Air Installer icon appears. I'm able to click on this icon but then I get the error. Anyone else experiencing this problem? Anyone have success getting through this problem? Thank you!
If the Adobe product is not compatible with Lion, it's still Adobe's issue. Even still, this is a MacBook Pro hardware forum, so if you think Lion caused it, try going to the Lion forum, maybe someone will be able to give you quick/helpful support.
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion -
trying to download new software for ipad but get the same message coming up which is there was a problem downloading the software the network connection
timed out make sure your network connections is active or try again later. I have tried about 5 times to download this can anyone helpHave you disabled any firewall and security/antivirus programs? This seems to have helped the vast majority of people who have posted the same problem in this forum.
-
Trying to upgrade to ISO 5 but always get timeout error
Trying to update via PC/itune but get timeout error everytime. " network connection timed out " but nothing wrong with the connection.
Any solution?Thks it went a bit longer but same error - using Kaspersky which I closed
I am now trying it on my XP laptop (kaspersky closed) & it is downloading but 'time remaining is 2hrs!
not happy to have an open system for that long -
I have just bought apple TV tp use with my Mac book pro This has now ben upgraded tp mavericks 10.9.1 but i cannot get an airplay simble on my info bar? What am i doing incorrectly?
You posted in the iPad forum instead of the MBP forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
http://appletv2.com/airplay-icon-missing-ios-7/
Cheers, Tom -
The Iphone "Iphone" could not be restored. This device isn't eligible for the requested build. Then I am given the option to click "More Information", or Ok. I have followed all of the necessary steps, but I haven't had in suecessful trials. Will someone PLEASE help, I am REALLY ready to use my fricken 280 Dollar Iphone! Lol. Thanks.
Bad news: It sounds as if you were sold a jailbroken iPhone.
Good news: File a SNAD with eBay. Make sure all your correspondence has been through eBay Messaging. The fact that the seller has been ignoring you will not sit well with them.
You will get 100% of your money back, including shipping. Paypal will simply seize his funds and return what is yours.
Lesson: Don't buy a used iPhone.
It's much worse for the seller. His PayPal and eBay accounts will be frozen. Until he squares up with both you and eBay, he's out of money and out of business. -
As above really, keep getting activation server unavailable, after trying to activate my phone after a restore
I do have a SIM card installed, albeit it says invalid sim.and this was my reason for a restore.
My sim is the same sim I have had since I bought the phone new, it has never been removed and the phone is not jail broken.
Still cannot activate due to server not available!
Maybe you are looking for
-
Regarding: Loading data from R/3 To BI for a Generic Data source
Hi Every, Need Help Urgent I had created a Generic data source with function Module as the data source, in Rsa3 it is working fine. 1-> I had replicated the data source to Bi then i had created a info package and then I executed the same. when it is
-
A POSSIBLE FIX FOR RE1000 CONNECTION ISSUES!
My Amazon Review for the Linksys RE1000: I have been an Amazon customer for several years and this is my first review ever. I'm only taking the time to post this review due to my utter frustration with this product. Here are the bullet points of my e
-
when i go to update apps the previous owners apple id is stuck in the id box and it won't let me put mine in.. PLEASE HELP! LOL
-
Cost alocation and or distribution
Hello Gurus, ive got a requirement to settle the spcific % of costs from one cost center and cost element into another cost element. These steps are done to calculate the primal cost of the workers months load. i.e. if we planned 1000 working hours,
-
hello, i have a prograss bar bean class and i saved this bean in /form90/java and set the property of beans item " implement class" with this bean name but not working or display. urgent help. thanks