Upgraded to 7.5.2 and HP LaserJet 1320 Stopped Working

I upgraded to firmware 7.5.2, and now my HP LaserJet 1320 doesn't work. I reverted to 7.4.6, and it still doesn't work.
Apple fix your firmware !

Hi smurfie407,
Welcome to Apple Support Communities.
Try running through the troubleshooting tips in the article linked below, they should help you resolve the communication issue between your iMac and LaserJet printer.
Troubleshooting printer issues in OS X - Apple Support
Take care,
-Jason

Similar Messages

HP LaserJet 1320 stopped working with Mac

Hello. I recently installed OS X 10.7.5 and now my HP LaserJet 1320 no longer communicates with my computer. I've searched HP site (refers me to Apple for updates), installed all update from Apple, deleted and re-added the printer, but the problem persists. does anyone have a solution?
thanks!

Hi smurfie407,
Welcome to Apple Support Communities.
Try running through the troubleshooting tips in the article linked below, they should help you resolve the communication issue between your iMac and LaserJet printer.
Troubleshooting printer issues in OS X - Apple Support
Take care,
-Jason

I have Stickies 6.0, I upgraded to 10.6.8 and now it won't work, is there any way to recover my old Stickies info?

I have Stickies 6.0, I upgraded to 10.6.8 and now it won't work, is there any way to recover my old Stickies info?

Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808

I just upgraded my iPhone 3GS to 4.3.5 and my universal doc stopped working with it? It has worked flawlessly for the last year and suddenly I get the message: "this iphone is not optimized for this device." The music comes out too quiet to the speakers

I just upgraded my iPhone 3GS to 4.3.5 and my universal doc stopped working with it? It has worked flawlessly for the last year and suddenly I get the message: "this iphone is not optimized for this device." I dismiss the message, but the remote no longer works with it and the music is too quite to the speakers. The remote works fine with my Macbook Pro. I tried a restore on the iPhone and started from scrach, but the same problem exists.
Any help with this?
Thanks,
JT

yep... my iphone 4 also having problem like astoker.. u see on dock pin using torch light.. i found 2 pin touch each other.. i solve my problem ready.. thanks wjosten.

Upgraded to OS X 10.9 and Slideshow in iPhoto stopped working (stays on first slide; will not advance)

Upgraded to OS X 10.9 and Slideshow in iPhoto stopped working (stays on first slide; will not advance)

Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database followed by Option #1 to reapair permissions if #4 doesn't help.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If still not working log into another user account on your Mac and try a slideshow from there. If it works there then the problem is limited to your account. If it fails there it's system wide and may require a reinstall of iPhoto or the system.

Hello. After i upgrade to moutain lion my WD my book studio stop working and my mac doesnt recognize it. I need help please

Hello. After i upgrade to moutain lion my WD my book studio stop working and my mac doesnt recognize it. I need help please

yes, it appears in disk utilities. but i cant get any information of what is inside. thank for your interest in my issue

I cannot conect to APP Store. I upgraded to IOS 8.3 and APP Store has not worked since. I am being asked to tipe my user name /password and nothing happens afterwards. No error messages either.

I cannot connect to APP Store. I upgraded to IOS 8.3 and APP Store has not worked since. I am being asked to type my user name /password and nothing happens afterwards. No error messages either.

hey the sever is down for the moment try again latter tonight... we have been attepting and i eveen went to the apple store third Street Primonade and alejadnro could not help me he said to try soon
John

Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Hp laserjet 1320 not working with new mac

i've recently bought a new apple computer, the mac runs with os x 10.9.2.
now i'm trying to get my old hp laserjet 1320 to work together with my new computer - but neither the mac is cooperating nor the old laserjet. i've also installed a new hp officejet pro 8600 - this printer/scanner/fax works well, but i also wanted to use my old laserjet until i run out of printing cartrigdes )
thanks for the help!!!

Hello nyc213,
It sounds like you are unable to use your LaserJet printer with your computer. I recommend the troubleshooting in the following article named:
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Check the printer
Go to the printer and check the following:
It’s turned on and is displaying normal status lights.
It has paper, and the paper isn’t jammed.
It has enough ink or toner.
Its cables are properly connected.
If your printer is attached to your computer’s USB port, open System Information, then click USB. If the printer’s name appears in the hardware list but the printer doesn’t work, review the printer’s documentation for further troubleshooting information.
Check your device’s USB connection
If the printer is on the network, open Printers & Scanners preferences, then add the printer again to create a new printer queue. For instructions, see:
Set up a printer
Use the best software for your printer
Make sure you have the correct version of your printer’s software (also called its printer driver).
If you’re using a printer that another user is sharing, make sure you’re both using the same version of the printer software. To find out which version you’re using, select the printer in Printers & Scanners preferences, click Options & Supplies, then click General. Note the driver version.
If you’re using a network printer or a printer attached to your Mac, make sure you have the latest version of the software for the printer. If you still have problems, try different printer software for your printer.Change or update printer software
If you still can’t print, reset the printing system.
Reset the printing system
Thank you for using Apple Support Communities.
Take care,
Sterling

Just downloaded itunes version 10 .2.2 and my iphone has stopped working. now showing fault on itunes asked to reinstall. Why has this happened?

just downloaded itunes version 10.2.2 + Qucktime and my ipohone has stopped working!
I am told there is a fault in my itunes software and I must reinstall.
Why has this happened, is there a fault with this new version?

Whilst I don't have an answer, I hope a knowledge specialist does.I've seen numerous posts like this.After 10.2 update I lost library and haven't been able to actually connect my iphone to itunes for the upgrade. Each time I connect the iphone my system crashes. There was NOTHING wrong with my itunes or system until the point of update. There doesn't seem to be support, despite the extent of this problem. My iphone seems to need an update as its overheating and battery life is a nanosecond. BEYOND FRUSTRATED! All input welcome.

Send Link and Mail To are stop working after update to FF v.13 on WinXP

Send Link and Mail To where stopped working after upgrade to FF13 on win XP. I'd appreciate any suggestions.
Thank you in advance

Can you check to see whether your mailto setting got changed?
orange Firefox button ''or'' classic Tools menu > Options > Applications
In the Search box above the list, type or paste '''mailto''' and pause while Firefox filters the list. On the right side, you can select your mail application. Unless it's missing. Are you able to establish the connection?

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.

BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton

MDB and Database - Listener port stops working

Hi,
I have created an MDB which does the following when a message is received from the queue.
1. Store message in database
2. do some processing
At step 1, if there is any issue with the database connection (e.g. database is not available etc), I rollback transaction. My idea is to leave the message on queue for now and retry it again after some time unless the database is back again. "Maximum retries" of the listener port is set to N but since there is no retry interval available, all N retries are done in a flash and my listener port stops working. I cannot use backout mechanism as I have to wait for the database to be back again. What are my options?

usmanchaudhry wrote:
Hi,
I have created an MDB which does the following when a message is received from the queue.
1. Store message in database
2. do some processing
At step 1, if there is any issue with the database connection (e.g. database is not available etc), I rollback transaction. My idea is to leave the message on queue for now and retry it again after some time unless the database is back again. "Maximum retries" of the listener port is set to N but since there is no retry interval available, all N retries are done in a flash and my listener port stops working. I cannot use backout mechanism as I have to wait for the database to be back again. What are my options?i believe you need an XA driver and a transaction manager, for starters.
a simple JDBC rollback won't do it.
which app server are you using?
which jms provider?
%

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W.

Upgraded to 7.5.2 and HP LaserJet 1320 Stopped Working

Similar Messages

Maybe you are looking for