Upgraded to 75/75, receive 7.3/80 Why less service for more $

Hi - Fios has been good service last 5 years.  Decided to upgrade as internet use is increasing and video is impossible most of the time.  So upgraded for extra $15/mo.  Now, since technician was here internet download speed is reduced from 25 to 7.3, and I am paying for 75.
Anyone have a solution to this not good speed issue?

This internet speed requires certain equipment
You might need a new router and or ONT
Call tech support and ask for a health check to be ran on your router. Also ask if enough light is being pushed to the ONT
Ask for the FiOS advanced WiFi router as a replacement and or the Quatum Gateway

Similar Messages

  • I just upgraded to Yosemite. Iphoto is now broken.  Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

    I just upgraded to Yosemite. Iphoto is now broken.  Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

    Perform the following, stopping with the first one which works:
    1. Open the Mac App Store's Purchases tab. If you're prompted to accept iPhoto into your Apple ID, do so.
    2. Move it out of the Applications folder(it may need to be put into the Trash temporarily), and then see if you can download it for free from its individual product page.
    3. Click here and contact Apple.
    (116137)

  • HT201364 Running 10.6.8 and can't upgrade to Yosemite. Receive this error message "We could not complete your purchase. INSTALL_ERROR_DISTRIBUTION_SIGNED_BY_APPLE"

    Running 10.6.8 and can't upgrade to Yosemite. Receive this error message "We could not complete your purchase. INSTALL_ERROR_DISTRIBUTION_SIGNED_BY_APPLE"

    i have the same problem too, you didnt find the answer yet???

  • In attempting to upgrade CS6 CC I received this error message: U44M1P7. What does it mean

    In upgrading CS6 CC I received the following error message: U44M1P7. What does it mean and how do I correct it?

    It means that Adobe need to pull their act together and fix their awful application manager. Well, whatever. Run the Creative Suite Cleaner Tool, reinstall the programs, try again.
    Mylenium

  • I recently received a mac book air 11 inch for christmas ... i beliehve it was bought in the states from my father i was unaware of the specs until i opened and read it... and i was wondering if i can still do the upgrade to 8gb ram and bigger flash drive

    i recently received a mac book air 11 inch for christmas ... i beliehve it was bought in the states from my father i was unaware of the specs until i opened and read it... and i was wondering if i can still do the upgrade to 8gb ram and bigger flash drive.. is this possible and for how much? its only a week old.

    Your 14 days are up, however you could take your case to Apple Inc. regarding same,
    however those are the stipulations.
    RAM cannot be upgraded however, period, its permanent on the logic board after mfg.
    As for the SSD (solid state drive), upgrading same is a bad premise 9 times out of 10.
    No notebooks is a mass storage device, and you need an external HD for data redundancy and backups regardless.
    data that is static on your SSD and not used very often has no logical reason to be ON the notebooks, and best saved on a superslim external HD ($60)
    SSD are very expensive, even a small one,  HD are cheap as dirt and users are recommended to have one regardless for many good reasons.

  • When attempting to upgrade my iMac from Snow Leopard to Mavericks, I receive the message "This disk is used for Time Machine Backups" when I try to select the lone available hard drive.

    When attempting to upgrade my iMac from Snow Leopard to Mavericks, I receive the message "This disk is used for Time Machine Backups" when I try to select the lone available hard drive.  I have ensured that Time Machine is turned off.  Upon some Google research, some who reported this problem were told to delete the folder backup.backupdb, but I do not have this folder on my Mac.  Any suggestions?

    The folder would be at the root of your hard drive. Double-click Macintosh HD and look there.
    If it isn’t there, I’m not sure what it is seeing.

  • I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks

    I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks

    BTW. I have seen posts suggesting age of Mac has an affect. Mine is MacBook Pro (Retina, Mid 2012)
    The mail I am having problems send is Exchange and google mail. The google client I re-installed and this had no affect.

  • I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks in response to Pita Fito I have contacted three more people that made the upgrade and they have the same problem

    I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks
    in response to Pita Fito
    I have contacted three more people that made the upgrade and they have the same problem. My advise is not to upgrade until Apple solves the serious issue, I would hate to have to re-install Outlook...

    I can send e-mails just fine with apple mail on yosemite...
    Might not be a generic problem but rather a personal problem..
    You should try find a fix rather than waiting on apple.
    Hopefully somebody can help you out.
    More than happy to help with your settings/preference pain... And compare mine with yours...
    If you send some screenshots... I can send you my equivalent... So maybe you can figure it out.
    Is it a gmail or icloud email acount? Can be of more help if it is.

  • I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available

    I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available it included HDR & Panoramic photo merge. I cant find these. Where do I find them.

    well that was a big waste of my time & data allowance then ...
    I live in a flaky slow internet area & I keep my photo edit machine off the internet unless & want to update something. CC is no use to me & that useless update just used up a 12th of my allowance for the year ...

  • Forced to "upgrade" for more $$$ and now my FIOS speed is crippled.

    On Wednesday of this week, I was happily using my FIOS 20/5 service with no problems when I realized my annual agreement for the TV/Internet package was about to expire so I proactively called Verizon to renew for another year of service.
    The agent told me that Verizon no longer offers 20/5 and 25/25 is now the least expensive option that I can choose, resulting in approximately $15 extra per month on my bill. I implored the agent to continue my service at 20/5 for the same price but she was firm with the fact that it was no longer available. Needless to say I was frustrated with the result but realized that I was not going to get anywhere so I accepted the new, more expensive package.
    I was told the upgrade would happen sometime over night and that the new package would be in place by Thursday morning. On a hunch (and also because previous package upgrades have been bumpy) I went to www.speedtest.net and got a result of 19.58 down and 4.40 up - exactly what I would expect with a little bit of overhead for network operations.
    So Thursday morning arrives and I decide to check the speed to verify everything is in place and the first result comes back as 9.95 down and 12.25 up. Hmmm, obviously something changed because the upload speed is now more than double what I had with the previous package but curiously, the download speed is only HALF of what I got with the previous package (the one that's no longer offered). So I call Verizon to begin the quest for an answer.
    First level tech support is of no help. He goes through the standard list rebooting of the router (no change) rebooting the ONT (no change) sending new signals to the router and ONT (no change) and finally escalates the ticket to the next level and tells me that I'll get a call back within 8 hours. Frustrated with this outcome, I try a different avenue for support (the original sales agent) and end up back with first line tech support who informs me that the first tech support guys was wrong and I will get a call back within 24 hours!!! Great, just great.
    Finally get a call back today from 2nd level support and after punching keys for a few minutes, this guy insists everything is correct on the Verizon systems and there must be something wrong with my equipment. I explain to him that I was having no problem getting 20/5 service and NOTHING has changed on my end so how could my equipment be responsible for the speed loss? His only response it to reiterate that everything is correct on his side and all he can do is send out a tech to my house to run test and prove to me that I'm getting the speeds that have been allocated.
    Great, now I've wasted all this time AND I have to waste MORE time on Monday waiting for a tech to arrive (who will almost certainly arrive in the last 30 minutes of the 4-hour window). This is almost the exact same scenario that happened the last time I was upgraded to a faster package. I don't recall exactly how it got resolved but I do remember a tech coming to my house only to find that (shockingly) my router wasn't receiving the speeds is was supposed to be getting and that, indeed, the problem was somewhere in the spaghetti and duct-tape of the Verizon FIOS network.
    Multiple tests throughout this period (both at speedtest.net and speedtest.verizon.net) continue to average around 8 down and 11 up on my connection.
    Anyway - I'm sure this will drag on and on and I will continue to be a dissatisfied Verizon customer. I just wonder why Verizon can't get it right when it comes to customer service. More over, I wonder why I keep giving them my money.
    Solved!
    Go to Solution.

    Jayh. understand your frustration! Why dont you private message me your info so we can take a look into it for you. Thanks Brett
    Brett
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • I did nott receive any disc, manuals or otherwise support for this brand new cp. is that normal?

    I have a Pavilion p2-1122 - - - It had win 7 but now has win 8 - - - no error msg - - - did no receive disc or manual - - - - Is this normal HP practice?

    Hi:
    Yes that is normal. 
    Various manuals can be found on the PC's support and driver page.
    http://h10025.www1.hp.com/ewfrf/wc/product?product=5285229&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
    As far as disks...you are given the opportunity to make a set of recovery disks using the recovery manager found in the W7 all programs menu.
    If you did not do that, and have now upgraded to windows 8, I believe you have lost that capability.
    If you need recovery disks, you will now have to order them from HP.
    See this link for more info.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&tmp_task=solveCategory&cc=us&dlc=en&lan...
    Paul

  • I received as a present an Iphone 4 for which I need decoding; I mention it has soft version 433(8J2). How can I do it?

    I received as a present an Iphone 4 for which I need decoding; I mention it has soft version  iOS 433(8J2). How can I do it?

    What do you mean by "decoding"? Do you mean that you wish to upgrade to a newer version of iOS? Do you mean that you wish to unlock the iPhone from it's current cell carrier? You will need to explain more fully what it is that you are trying to accomplish.
    If you are not comfortable with English, try posting in your native language.
    Regards.

  • I just bought a new macbook pro, i lost my receipt which had a website on it that i had to go to were i would receive a code which i can redeem for the new mountain lion software. What do i do?

    I just bought a new macbook pro, i lost my receipt which had a website on it that i had to go to were i would receive a code which i can redeem for the new mountain lion software. What do i do?

    See Apple - Free OS X Mountain Lion upgrade Program.

  • Iphone 4 since upgrade to ios 5.1.1 no longer works with made for itunes, iphone devices.

    Ever since I upgraded to IOS 5.1.1 my Iphone no longer works for playing music thorugh my Apline car unit, My Logic 3 clock radio, and a Next made for ipod device.
    I can sync through ITunes on the PC and can also play videos through the HDMI adapter.   My wifes iphone 4s and the kids  hand me down iphone 3s still play fine through these made for Itunes , Ipod , Iphone devices.
    I want to downgrade back to the prior IOS  I had before Apple encouraged me to install this bugged one.   How do I go about getting a legit non jailbroken prior IOS version installed on my Iphone?
    Is Apple aware of this issue , as I have seen blogs about this it is affecting other people?   Will this issue be resolved with ios 6?
    Can I get the beta ?
    Thanks,
    Douglas

    Agreed. Same thing here. Just bought a late model Alpine INE-S920Hd and it is all kinds of broken. I think this is happening because Apple shifted the music and video. Totally buggy. Bluetooth refuses to work properly, too. A2dp keeps stealing the audio from Pandora in the Alpine interface. The ipod controls dont work at all.

  • I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files?

    I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?

    Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.

Maybe you are looking for