Upgraded to FF 26.0, now links don't work in MS Outlook. But work in IE9

Had FF as default browser. After upgrade to FF 26.0, can no longer link to website from email received in MS Outlook 2010. Get error msg that "needs to know what program to open xxxx"
If able to copy hyperlink from right-click, can paste it into FF and then can open URL. But not all links allow copying. Tried repairing MS Office, updated Flash [again], tried safe mode. No success
Changed default browser to IE 9.0 and links in Outlook emails work again.
Note - can also make FF work, if, in the errro msg box, choose to search for program to open link. FF does not appear in the drop down list but allows search for other programs. Firefox is on the list of ~40 programs. Choose Firefox and the link will open. Obviously this is not workable most of the time.

Sometimes there is a problem with links launching in Firefox, but don't recall hearing about anyone getting that particular dialog before. If you are interested in troubleshooting further, I'll dig out my settings for comparison.
What was the problem with Candy Crush? If you notice problems on Facebook with embedded games, this often is related to the mixed content blocking feature. This article has more information: [[How does content that isn't secure affect my safety?]]

Similar Messages

HT3529 I just upgraded to iphone 5 and now imessage don't work. it sends as sms. i've checked imessages is on in settings.

I just upgraded to iphone 5 and now imessage don't work. it sends as sms. i've checked imessages is on in settings.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
It might also be a good idea to contact Square for assistance.

I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films.

I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

Picture UNDER Navigation link Problem? now links don't work

Sorry for the repost need to add a few things
Hi- I am having a problem with using a background image "under" the navigation links??
Here is what I did
(Thanks to James S. who taught me this trick I:
optimized a full page jpg and dragged it to my web pages only 34K
2) sized it to fit
3) sent to to "background"
and it works fine
HOWEVER
when I stretch the bacground image UP under the navigation links the links no longer work?
what am I doing wrong?
if I lower the background image to just BELOW the links they work but it looks bad.
How can I create a full page background that is also under the links without making it a bloated PNG (using the background image fill command in i web)
Thanks in advance!
Jim
I actually had it working fine under most of my pages then when I "uploaded all to.mac it stopped???
http://web.mac.com/videolounge the Rate Card" page works after lowering image????

Hi James
I see you've helped a number of people with iWeb problems so would appreciate your valuable advice please.
I'm having problems with iWeb links not working so wondered if you could help or point me in the right direction please
This is my very first web site and all links work fine in iWeb, but some of the links are not working when I publish my site, so I'd really appreciate you having a look at my site please and give me your very valuable advice on how to fix this please.
Someone suggested emptying the browser's cache which I did, but it's still not working. I have made sure that all the link boxes have been brought to the front and any pictures etc near the links have been sent to the back.
My temporary site is at http://web.mac/gngraphics and if you were to click on anywhere in the Home page it's fine, but if you were to click on exhibitions/events, once you're in that page none of the links work, and it's the same for most of the others, but not all.
Please let me know if you need any other information, and thanking you in advance for taking the time and hope you can help me.
George
Macintosh G5 Mac OS X (10.4.9)
Macintosh G5 Mac OS X (10.4.9)

Images made into links (in divs) not working in Internet Explorer but works in Firefox. help!

Hey guys,
The text links are fine, but the image links don't work in internet explorer. Anyone know why this is happening?
Sample code:
<a href="facebook"><div class="fb"><img src="Facebook.png" /></div></a>
The link links to another HTML in my site

If you anticipate having more questions, a great self help is to validate your code, that is, test your code against the rules set for the particular DOCTYPE you are using.
http://validator.w3.org/
"you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
In this case it would have pointed out that you can't put a <div> inside an <a>.
Best wishes,
Adninjastrator

Query rewrite don't work wor aggregate query but work for join query

Dear experts,
Let me know what's wrong for
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
I have two MATERIALIZED VIEW:
A) -- Only join
CREATE MATERIALIZED VIEW "SCOTT"."TST_MV"
ENABLE QUERY REWRITE AS
SELECT "T57410"."MEMBER_KEY" "MEMBER_KEY",
"T57410"."ANCESTOR_KEY" "ANCESTOR_KEY",
"T57410"."DISTANCE" "DISTANCE",
"T57410"."IS_LEAF" "IS_LEAF",
"T57460"."DEPARTMENTID" "DEPARTMENTID",
"T57460"."NAME" "NAME","T57460"."PARENT"
"PARENT","T57460"."SHORTNAME" "SHORTNAME",
"T57460"."SKIMOID" "SKIMOID"
FROM "BI_OIV_HIER" "T57410",
"BI_DEPARTMENTS" "T57460"
WHERE "T57410"."ANCESTOR_KEY"="T57460"."DEPARTMENTID";
B) -- Join with aggregation
CREATE MATERIALIZED VIEW "SCOTT"."TST_MV2"
("C41", "C42", "C43",
"C44", "C45", "C46",
"C47", "C48", "C49",
"C50", "C51", "C52",
"C53", "C54", "C55",
"C56", "C57", "C58",
"C59", "C60", "C61",
"INCIDENTTYPE")
ENABLE QUERY REWRITE
AS SELECT COUNT(T56454.TOTAL) AS c41,
T56840.CATEGORYID AS c42,
T56840.PARENT AS c43,
T56908.DOCSTATEID AS c44,
T56908.PARENT AS c45,
T56947.EXPIREDID AS c46,
T56947.PARENT AS c47,
T56986.ISSUESTATEID AS c48,
T56986.PARENT AS c49,
T57025.LOCATIONID AS c50,
T57025.PARENT AS c51,
T57064.NEWID AS c52,
T57064.PARENT AS c53,
T57103.PARENT AS c54,
T57103.RESOLUTIONID AS c55,
T57142.PARENT AS c56,
T57142.RESPONSIBLEID AS c57,
T57181.PARENT AS c58,
T57181.SOURCEID AS c59,
T57460.DEPARTMENTID AS c60,
T57460.PARENT AS c61,
T56454.INCIDENTTYPE
FROM BI_OIV_HIER T57410
BI_DEPARTMENTS T57460
BI_SOURCE_HIER T57176
SOURCE T57181
BI_RESPONSIBLE_HIER T57137
RESPONSIBLE T57142
BI_RESOLUTIONS_HIER T57098
RESOLUTIONS T57103
BI_NEW_HIER T57059
NEW T57064
BI_LOCATIONS_HIER T57020
LOCATIONS T57025
BI_ISSUESTATES_HIER T56981
ISSUESTATES T56986
BI_EXPIRED_HIER T56942
EXPIRED T56947
BI_DOCSTATES_HIER T56903
DOCSTATES T56908
BI_CATEGORY_HIER T56835
CATEGORY T56840
INCIDENTS T56454
WHERE ( T56454.RESOLUTION = T57098.MEMBER_KEY
AND T56454.CATEGORY = T56835.MEMBER_KEY
AND T56454.DOCSTATE = T56903.MEMBER_KEY
AND T56454.EXPIRED = T56942.MEMBER_KEY
AND T56454.ISSUESTATE = T56981.MEMBER_KEY
AND T56454.LOCATION = T57020.MEMBER_KEY
AND T56454.NEW = T57059.MEMBER_KEY
AND T56454.RESPONSIBLE = T57137.MEMBER_KEY
AND T56454.SOURCE = T57176.MEMBER_KEY
AND T56454.DEPARTMENTID = T57410.MEMBER_KEY
AND T56835.ANCESTOR_KEY = T56840.CATEGORYID
AND T56903.ANCESTOR_KEY = T56908.DOCSTATEID
AND T56942.ANCESTOR_KEY = T56947.EXPIREDID
AND T56981.ANCESTOR_KEY = T56986.ISSUESTATEID
AND T57020.ANCESTOR_KEY = T57025.LOCATIONID
AND T57059.ANCESTOR_KEY = T57064.NEWID
AND T57098.ANCESTOR_KEY = T57103.RESOLUTIONID
AND T57137.ANCESTOR_KEY = T57142.RESPONSIBLEID
AND T57176.ANCESTOR_KEY = T57181.SOURCEID
AND T57410.ANCESTOR_KEY = T57460.DEPARTMENTID
GROUP BY T56840.CATEGORYID,
T56840.PARENT,
T56908.DOCSTATEID,
T56908.PARENT,
T56947.EXPIREDID,
T56947.PARENT,
T56986.ISSUESTATEID,
T56986.PARENT,
T57025.LOCATIONID,
T57025.PARENT,
T57064.NEWID,
T57064.PARENT,
T57103.PARENT,
T57103.RESOLUTIONID,
T57142.PARENT,
T57142.RESPONSIBLEID,
T57181.PARENT,
T57181.SOURCEID,
T57460.DEPARTMENTID,
T57460.PARENT,
T56454.INCIDENTTYPE;
So, optimizer uses query rewrite in
select * from TST_MV
and don't use query rewrite in
select * from TST_MV2
within one session.
select * from TST_MV should be read as underlying select for TST_MV:
SELECT "T57410"."MEMBER_KEY" "MEMBER_KEY",
"T57410"."ANCESTOR_KEY" "ANCESTOR_KEY",
"T57410"."DISTANCE" "DISTANCE",
"T57410"."IS_LEAF" "IS_LEAF",
"T57460"."DEPARTMENTID" "DEPARTMENTID",
"T57460"."NAME" "NAME","T57460"."PARENT"
"PARENT","T57460"."SHORTNAME" "SHORTNAME",
"T57460"."SKIMOID" "SKIMOID"
FROM "BI_OIV_HIER" "T57410",
"BI_DEPARTMENTS" "T57460"
WHERE "T57410"."ANCESTOR_KEY"="T57460"."DEPARTMENTID";
So, select * from TST_MV2 should be read by similar way as underlying select to TST_MV2
DBMS_STATS.GATHER_TABLE_STAT is done for each table and MV.
Please help to investigate the issue.
Why TST_MV2 don't used for query rewrite ?
Kind regards.

Hi Carlos
It looks like you have more than one question in your posting. Would I be right in saying that you have an issue with how long Discoverer takes when compared with SQL, and a second issue with regards to MVs not being used? I will add some comments on both. If one of these is not an issue please inform.
Issue 1:
Have you compared the explain plan from Discoverer with SQL? You may need to use a tool like TOAD to see it.
Also, is Discoverer doing anything complicated with the data after it comes back? By complicated I mean do you have a large number of Page Items and / or Group Sorted items? SQL wouldn't have this overhead you see.
Because SQL would create a table, have you tried creating a table in Discoverer and seeing how long it takes?
Finally, what version of the database are you using?
Issue 2:
Your initial statement was that query rewrite works with several MV but not with others, yet in the body of the report you only show explain plans that do use the MV. Could you therefore go into some more detail regarding this situation.
Best wishes
Michael

Upgraded to IOS 8 and now I don't have silent option

I have an iPhone 5 and I had IOS 7 when I got it. I would open the control center and the options on the top went like this: airplane mode, wifi, bluetooth, do not disturb, and the silent option (which was like a bell with a slash). I upgraded yesteray to the IOS 8 and now I have all thise options except the silent option. My side switch is for the rotiation lock. Now I can't put my phone in complete silent. I've literally skimmed through the entire settings to look for something to change it for months and haven't found it. Now I the camera sound can't be silent! Please help! I already called Apple Support but they couldn't help.

If Apple is not able to help, I don't think you'll find a solution here.
In iPad you have the option where you get these settings using which you can actually make the control center show either silent or Lock Rotation.
However ideally speaking you have the side switch in iPhone for silencing and if you dont get to lock rotation in control center you got to travel all the way to settings to lock the rotation.
Thats the reason I think it has been corrected in iOS8.
CHEERS!

I upgraded to mountain lion and now I don't have iPhoto how do I get my pictures off of my phone?

I recently upgraded to mounntain lion, since then I noticed there isn't an iPhoto. Before mountain lion if I plugged in my phone or camera into my computer I could view/download the photos to iPhoto. How do I get my pictures off of my phone now?

Demo Dude wrote:
I recently upgraded to mounntain lion, since then I noticed there isn't an iPhoto.
Reinstall it with DVD that came with your computer.
Or just redownload it from the Mac App store.

I upgraded to mountain lion. Now my virgin mobile broadband internet card will not work

I uninstalled the broadband software and then tried to reistall it but it will not work. I pluged in my usb card but it doesn't show that it is pluged in. I tried the card on my girlfriends computer and it works. I pluged a camera in my usb port and that works. Can anyone help me out.
Thanks

My internet card will only work on 32bit,and it sounds like mountain lion only works on 64bit so that must be my problem. I think I will have to upgrade my internet or go back to lion.

I just upgraded to firefox 6 and now cannot connect to the internet. IE still works fine but firefox won't connect. Any suggestions on how to get the new firefox to connect to the internet?

I just upgraded to ff 6.0.1 via an automatic push. Since then, ff hasnt been able to connect to the internet. Error message:
Firefox can't establish a connection to the server at www.google.com.Firefox can't establish a connection to the server at www.google.com.
IE has no trouble connecting to the internet.

After upgrading, your firewall may not be recognizing the new Firefox version and is not allowing it access to the internet. On your firewall progam's allowed applications list, remove Firefox, then re-start Firefox, try going to a website, your firewall will detect the new version of Firefox, then give the permissions needed for Firefox to have internet access.
*See: [https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

HP CM1312MPF drivers don't work via Windows 7 but works fine via Linux dual booting

HP CM1312MPF drivers don't seem work using Windows 7 (64-bit) . Original HP drivers CD now lost. Current drivers were downloaded from HP's website. (This webpage has a number of drivers and most 64-bit ones have been tried. Prior to my Windows re-install, the machine printed and scanned satifactoralily in Windows 7. One day this O/S refused to boot and had to be fully re-installed. The reinstall has been tried on both a SSD and on a HDD. (I have 3 x HDDs and 1 x SSD in this Desktop system. and I dual boot Windows7 and Linux Mint with data on its own HDD.) No attempt has yet been made to scan after this Windows re-install, as I have a separate photo scanner. I mainly wish on the to print on CM1312MPF, however it did scan perfectly well prior to the reinstall of Windows. THE CM1312MPF PRINTS FINE VIA THE SAME USB OUTPUT LEAD (AND POWERED HUB) AS VIA LINUX MINT 17 (PETRA) when I dual boot and without any PHYSICAL CHANGES between changing O/Ss. It must be a driver problem, surely, mustn't it? I look forward to your help. John_of_Penrith

You can also disable that windows wireless "Critter" from device manager and it shouldn't ever again show-up in your adapter list. Thanks for the lesson. I too have wondered about the windows virtual adapter and what it's for. I never had it show-up in my adapters though in the network and sharing center. That was strange that it happened to you. I also occasionally just go to device manager and reload the adapter that came with laptop-not the windows one. It
seems to keep it running fairly well since there have been no new drivers for it. I think it was an experiment or something called the DW1501 Wireless half-mini n that came with my Dell Inspiron N7010 laptop. I don't particularly like it as compared to the other wireless adapters in my home, this thing is slow on downloads, but I don't want to bother to get a new adapter.
Anyhow thanks for the interesting lesson.
LindaSView

IDAutomation UPCa fonts don't work on Client desktop but work on Server?

Hi SCN Friends,
I have a situation where in IDAutomation UPCa fonts with IDAutomation demo installer works on Server through Crystal Report.
However, the same reporting with IDAutomation installed on Desktop does not print the Crystal report through SAP. It shows strange characters not barcode characters. However, on desktop, the barcodes come out ok on a plain crystal report directly done (not out of SAP).
On my laptop that has both SAP server and Client, the report prints okay out of SAP?
What do you suggest please?
Tried reinstalls, and resizing and various IDAutomation fonts. Nothing worked for desktop client?
Look forward to your expertise.
Thank you,
Syed

Hi,
Not sure this link will helpful to you:
Crystal Reports Barcode Font UFL and Tutorials
Thanks & Regards,
Nagarajan

BB LINK DON'T RECOGNIZE MY Z10 WITH THE USB ON WINDOWS 7

Hi, I tried many things but I still don't find a solution for my problem.
I installed the BB Link many times but my Z10 is still not recognized by my computer (windows 7). It's only working with the WIFI and with the Wifi I can’t make a back up or transfer my data from my old BB to my Z10
BB link is also not recognizing my bold 9780 so I can't transfer my data to my z10. I also tried with another computer with Windows 8 and BB link don't work with my Z10 but works with my 9780.
When I plug the official USB cable it’s only charging my phone with my computer and I don't have any yellow exclamation in my windows device manager. I’m also not using an SD card, only the internal storage.
I tried to change the settings to “connect to windows” …
I have the z10.2.0.429 and I still don't have access to the new update --> it always says that I have already the new version installed.

first, i would suggest to check the drivers. not plug in the bb phone:
http://www.tech-recipes.com/rx/504/how-to-uninstall-hidden-devices-drivers-and-services/
if there is driver for bb. remove it and then install it manually:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB04761&sliceId=1&cmd=displayKC&d...
or
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB13336&sliceId=2&cmd=displayKC&d...
and you may have a look at this:
https://supportforums.blackberry.com/t5/BlackBerry-Curve/Blackberry-USB-Drivers-for-Windows-7/td-p/3...

Upgraded from iWeb 06 to 08, and now web address and links don't work

Hi there,
I recently had the hard drive of my computer replaced and the Mac shop automatically upgraded iWeb 06 to iWeb 08, without asking me (and they also upgraded iPhoto)... I didn't think anything of it and went home. The next time I tried to update my website in iWeb I was asked a question that went something like did I want to upgrade or change or did I want to go ahead or something? I foolishly just said yes, whatever, and did my updates to my website. Then I used Transmit to upload my website files to my web site host. The web pages themselves still all look fine in Firefox, but there is one massive problem: when I type in my web address, which is www.*****.com, in Firefox, I'm told: "404 Not Found - The requested URL /Site/Home.html was not found on this server". When this happens, I've noticed that the www.****.com that I typed into the address bar now has changed to http://www.******.com/Site/Home.html.... If I delete the "/Site" bit from this new "address" my website comes up! If I then click on the link The Albadukes e.g., this page comes up fine. I then click on Links, and this page also opens up fine. However, if I then try to go back to the page called The Albadukes, it doesn't open! Instead, I get the 404 Not Found message again. Here, I've noticed that the writing in the web address box of the browser has changed from "http://www.***.com/The_Albadukes.html" (which works) to http://www.****.com/The Albadukes.html" (i.e. with a space between "The" and "Albadukes" - doesn't work...). If I remove the space and instead add an underscore, then the page opens! This kind of thing happens in different directions between different pages within my website.
<Edited by Moderator>
I realise the problems when upgrading to 08 and I wish it had never happened, but it did. So my question is: does anyone know if these link and web address problems can be solved, or should I just accept that the problems are due to the upgrade and instead just recreate my website in 08 (and hope that 08 will work OK on my computer...)? I am very very grateful for any help!!
Many many thanks,
Sofie

Hmm, interestingly enough it works on my MacBook fine...just a lot slower but that's because of ram size. I cannot figure out what's the problem with it on my iMac though.
I've gone into Quicktime and deleted any divx files associated with that and still nothing.

I upgraded for Firefox 4 and now my simplePass identity protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE.

I upgraded for Firefox 4 and now my HP SimplePass Identity Protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE. It worked with the previous Firefox version but now when I use the internet, it doesn't even acknowledge I have the scanner. When I run my finger over it, it opens the settings panel but does not allow use of the already saved information or allow new information to be entered. I need this corrected. Any suggestions?

I asked this same question, and just received a response:
"Thank you for contacting DigitalPersona. There will be no update releases
for DigitalPersona Personal in the future. There will be no updates for
Firefox 4 nor Internet Explorer 9. IF they work they work, if they do
not work with DPPersonal, then you will have to decide to either keep
DPPersonal and forgo Firefox 4 or IE 9, or vice versa. DigitalPersona
is leaving the consumer market and is focusing on business applications.
In fact, DigitalPersona Personal will not longer be supported after
Mid-April of this year.
We apologize for any inconvenience this might cause. Sincerely, Tech Team "
In other words, there will be NO update.

Upgraded to FF 26.0, now links don't work in MS Outlook. But work in IE9

Similar Messages

Maybe you are looking for