Upgraded to iOS6 and now phone dont work

URGENT: Can someone help to get my phone working again? I ran the upgrade for my iPhone 4 and now it wont restore with the upgrade and will not go any where for that matter?

Maybe if you actually explained EXACTLY what is wrong, including any error messages you're getting, we could offer an intelligent suggestion.

Similar Messages

  • Ios4 update failed on 3gs and now phone dont work at all

    so i updated as per apple instructions and update failed no code given and my iphone 3gs is now dead as in blank wiped clean but a black screen with white apple cant even pwer off and not recognized as connected to computer to restore or try updating again. this is my only phone so apple cant call me back for support
    anyone else had this happen and fixed it?

    Ok this is wat happened to my iPhone 3GS after I opted to upgrade to iOS4.0:
    After the upgrade file finished downloading, the installation process got initiated. However, after a few minutes, the process crashed throwing up an Error 1602. My phone just displayed the connect to itunes logo. I did a hard reset (by pushing the home button & the power on/off button simultaneously) and the phone entered the recovery mode (or DFU or watever it is called). I reopened itunes and connected the iphone again. This time, I was told that the phone has been detected on recovery mode. I clicked RESTORE & it told me that the phone would be restored to factory settings,which I chose. The recovery process started and after a coupla minutes, I got another error. This time it was Error 1601.
    After spending a good 2 hrs researching the internet, I found the solution that did work for me. Here goes...U would need another computer for this (not the one u have been using to sync ur iphone with):
    1) Install itunes 9.2 on another computer.
    2) Connect ur iphone (while it displays the connect to itunes logo).
    3) itunes will detect an iphone on recovery mode.
    4) Click Restore. itunes will tell u that ur phone can be restored to factory settings. Choose OK.
    5) itunes will automatically download iOS 4.0
    6) once the download is complete, installation of iOS 4 should start immediately. if for some weird reason it doesnt initiate, press shift+restore and select the installation file (it is located in C:\Documenst & Settings\User\Application Data\Apple Computer\itunes\iphone software updates\xxxxx.ipsw )
    7) Once u've selected this file, installation will start & ull get a progress bar on ur iphone as well.
    8) The installation should come around fine & after a coupla automatic reboots, ur iPhone should now be up & running with iOS 4.0
    9) Itunes will ask you to name ur iphone. at this point, eject the iphone from the computer & connect it to the other computer (the one which u previously used to sync the iphone with). open itunes & ull get 2 options: Create a new iphone or restore backup from "Sandy's iPhone" ur iphone's name. Choose the 2nd option & watch ur iphone being restored with all ur backup.\
    10) once the sync is complete, eject & enjoy iOS 4
    Phew
    Cheers!!!

  • How can I get rid of ios6 ? I have had this iPad for less than 2 weeks and,ade the mistle of "upgrading" to ios6 and now my map is completely useless.  Feel like I have been robbed

    how can I get rid of ios6 ? I have had this iPad for less than 2 weeks and made the mistake of "upgrading" to ios6 and now my map is completely useless.  Feel like I have been robbed

    There are alternatives. But none of them have Google street view, able to work on iOS 6. Apple should have offered this as a beta version, for a few more months instead of inflicting us with an inferior product. This iPad will probably be my last Apple product. A shame, because until last a few days ago, I thought the iPad and iPhone were fantastic.
    Apple should quit their petty squabbling with, Google and Samsung and concentrate on supplying the best product.
    Google and Samsung must be enjoying this particular fiasco.

  • I updated my iphone to the ios6 and now it wont work.

    i updated my iphone to the ios6... and now it wont work at all.
    it wont even turn on, it keeps going back and forth between the black screen and then the apple mark pops up for a few seconds, and then turns back to the black screen again... and that just keeps going on...
    someone please help...

    Seems like ios6 isn't any good for any of their devices. I have an iPhone 4 and recently updated to ios6 and have had all the wifi problems and apps getting hung up on load screens. Restore is your best bet and downgrade if you can back to ios 5.1. If restore doesn't help with a fresh install of ios6 then call every Apple support number you can find and be heard like the 1,000s of other people like us with ios6 problems demanding support. There doesn't seem to be any quick fixes for ios6 other than an update from Apple.
    <Edited By Host>

  • Upgraded to iOS6 and now charging cable doesn't work

    I just upgraded to iOS6 n my iPhone 4, and now my charging cable doesn't work.  No...it's not an "official" Apple charger, but even the usb cable doesn't work when I plug it into my computer.  If I plug my iPad charger into it, it works fine.  How can the new operating system determine what kind of usb charging cable it "wants" to accept?  This charger and cable worked flawlessly before the OS upgrade.

    Same problem here. I use a wall charger and have had success by unplugging the charger from the wall, plugging the adapter into the iPhone, then plugging charger back into wall. Had the same problem with a car charger and got the phone to charge using the same procedure. I'd love to know if this works for you. Good luck!

  • Upgraded to ios6 and now Not opening....

    We upgraded the iPad to ios 6 and now the home page won't open and has a pic of itunes and then the cord coming up into itunes like we need to plug it into computer. I plegged it into computer and it asks to restore ipad>>>>What is going on?

    Yes, that is part of the process! Make sure you at using the computer you previously synced it to and restore from it from your last backup.

  • Recently upgraded to ios6 and now I crash all the time

    Hello,
    I have a 3gs and recently upgraded to iOS6.  Started crashing frequently.  Reloaded software from scratch, which didn't help.  Then went to apple store and they updated firmware there.  Still didn't help.  Started troubleshooting myself.  Noticed that it crashed more frequently when battery below 60%.  Tried shutting off cellular data and location services, just using the iphone through my home wifi network.  That helped a lot.  Never crashed.  Then turned back on cellular data, leaving location services off, and it still helped.  Then turned location services back on and it started crashing again.  So location services seems to be the culprit.
    Any idea how to remedy?   Keeping location services off wouldn't be a huge problem for me, though I'd prefer to have it active.
    Would be nice if apple would let us downgrade as the problem started with upgraded to ios6.  From what I've read, I'm hardly the first person to say this.
    Thanks.

    You might check and see if there are any Console entries about what happened when you attempted to launch a CS 5.5 app.
    Adobe links its apps with the particular volume on which it is running, and altho' I can't recall specifics, I know in the past I have had to reset Adobe's settings after OS upgrade. I do recall that it's a fairly easy procedure; just don't exactly recall what it is.
    BTW, CS 4 runs on Mountain Lion for me.

  • I updated my iphone 4s last night to ios6 and now I dont have any emails coming through?

    I updated my iphone 4s last night to ios6 and since then I have had no emails come through, its saying cannot get mail, verify that you have entered the correct account info in mail settngs??

    Your iPhone was probably hacked to unlock it from its original cell carrier. The update to iOS has now removed that hack and the iPhone has locked back to that carrier. Only the carrier to whom the iPhone is locked can unlock it, so you will have to contact that original carrier and ask about their unlocking policies.
    Regards.

  • HT1222 i updated my iphone 4 to ios6 and now it doesnt work at all :(

    i updated my iphone 4 to ios6 n then it doesnt start or work at all

    Since you say that you cannot do anything with the iPad at this point you may need to use DFU to restore it. Follow the above instructions about disabling any-virus software and the firewall, then follow these instructions.
    Placing an iPhone into Device Firmware Upgrade (DFU) mode
    DFU mode is not the same as restore mode. DFU mode bypasses the current OS installed. If you are getting errors trying to restore in iTunes, DFU mode is very likely for you.
    1. Open iTunes and connect the iPad to your Mac/PC.
    2. Press and hold the Home button and the Sleep/Wake button at the same time.
    3. After exactly 10 seconds release the Sleep/Wake button. Continue holding the home button until you iTunes pops up a message telling you that it has detected an iPad in recovery mode.
    4. Click OK and Restore your phone.

  • Upgraded to IOS6 and streaming meye stopped working

    I have cameras at my business using meye. It is now failing to connect since I upgraded software. IS there anyone that may know why the upgraded operating system would prevent me from watching my surveillance cameras? Any ideas or help would be appreciated.
    MD

    Hi
    This worked for me:
    I called Huawei and spoke to a service agent and the person I got through to was very helpful.
    I accessed the firmware update at the official site: http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=31145
    The agent advised me to unpack the download with WinRar on a Windows computer and then access the unpacked files on my Mac.
    I had tried using a Mac rar file unpackers that I downloaded through the App Store but they did not work.
    My Huawei E303 works now for me.
    Thanks.

  • Upgraded to 1.4 now applets dont work

    I used to be able to work with applets in my web browser.
    Now since i have upgraded to 1.4 it seems none of them work any more. Though I can compile and run java apps
    Any ideas?
    Thanks

    download msjavx86.exe
    DON' T !!!
    If you are using swing in your applets then they wont work in IE 'coz IE uses the
    m$ jvm. U need the sun's jvm if u are to run applets using swing properly on IE.
    Just go to
    http://java.sun.com/products/plugin/1.3/converter.html
    I doubt they have a converter for 1.4 but you can see.
    Convert your applet html code and your applets will run fine on IE.
    If you are unable to run on Netscape then it must be specific instance of the problem.
    In that case - what is the exact error you get ? Youcan see this using the "Java Console"
    option in the menubar.
    all the best.

  • I have an iPhone4 that I just upgraded to iOS6 and now I am unable to join my wifi network.

    Every time I try to join, it automatically takes me to a page that at the top says "Log In", but it says that this page cannot be found. My only option is to click the cancel button in the upper right hand corner. Which then just makes it so that I have not joined my wifi.
    I have tried forgetting the network. restarting my phone, and then trying to rejoin the network. But that hasn't worked either.
    What can I do?

    Joel, that is correct...the Digital Milenium Copyright Act has been interpreted such that jailbreaking a smart phone is illegal as it is a copyright infringement punishable by a fine of $2,500 per phone for an individual or up to $500,000 for an organized jailbreaking activity.  This went into effect January 26, 2013.

  • Error code 1,iphone backup and restore,now phone doesnt work at all and apple not in any hurry to solve issue,only had phone 4 mths,wish id stuck with iphone3 and never upgraded

    what a nightmare,no phone for 3 days and no sign of any positive help from apple.done backup and restore as wifi on phone stopped working,error code 1 and now phone doesnt work at all,apple say other people having problem but havent heard of anyone else,really disappointed in way apple are keeping me hanging on,phone is only 4 mths old

    My iphone is only 6 months old and I am experiencing the same problems. I have already had to have the phone swapped once with a phone that has a blown speaker. (The apple store is 2.5hours away so I havent been able to go back to replace the replacement) Since I did the ios 5 update, my phone says NO SERVICE and drops calls. It was speratic but last night, same ERROR message as you. As you know, if forces you to restore which caused me to loose valuable information and documents. insert loud profanity here _________. lol

  • Okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks

    okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks

    Hi sigrun from mo,
    If you are having a button issue on your iPhone that prevents you from doing further troubleshooting, you may need to have the phone serviced. You may find the following page helpful:
    Service Answer Center - iPhone
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Regards,
    - Brenden

  • Upgraded to ios6. Now my location services options show up as a shadowy image, and I can't access them. The only icon on is "find my iPhone. Is this for real?

    I upgraded to ios6. Now the location options do not work (under privacy settings). I can only access "find my iphone". I am using a number of apps that use this function. Is this because of the default switch to apple maps?
    Is there no way to geolocate images anymore, using the camera on the iphone?

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

Maybe you are looking for

  • Bugs in the installer

    I have run into a problem reinstalling SOA Suite 11.1.1.4 on a Windows XP laptop. In the confirmation page of the installer I can see that all SOA apps and libraries have target as AdminServer. I can modify it manually but I am not sure how it happen

  • Illustrator 10 (MAC) Question on shading objects

    Hello. I work in Illustrator 10, on a Mac using OS X. My question is, when you draw an object, just line art, what is the best way to shade in certain sections of the object to make it look dimensional? An example would be like a cylinder of some kin

  • Dynamic Update Query

    HI All, Please find below DML script. CREATE TABLE UP_A(ID INT , VAL VARCHAR(50)) GO INSERT INTO UP_A VALUES(100,'Hundred') INSERT INTO UP_A VALUES(1001,'Hundred and one') INSERT INTO UP_A VALUES(1000,'Thousand') INSERT INTO UP_A VALUES(1005,'Thousan

  • Incorrectly defined logical table source  error

    Hey ,I am very new to obiee and getting an error A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Fact - D) does not contain mapping for [case when Dim - Account. Account Number in ([ 11500, 115

  • Identifying message id based on TID

    HI, I want to find out message id based on a TID. I mean i want to get the message id for a particular TID. Is there any transaction that can display? Iam  using IDX5,giving the Transactionid but unable to get the message id to see the message conten