Upgraded to Itunes 10.5 yesterday and have no "text" at all only when I access Itunes Store, using Windows XP
Upgraded to 10.5 Itunes yesterday and have no "text" anywhere except in Itunes store. I do not even see the Toolbar drop menus up top (File, Help, etc.) I cannot make out any music in my library. I wish to upgrade my Ipad to IOS5 but am afraid to sync it because I won't see what I'm doing it. I saw a similar link where Windows may not have a Font and installed all uninstalled fonts to see if that would work, but did not. Do I need to uninstall Itunes and reinstall? I have Windows XP. Really not sure if it's an Apple/Itunes problem or a Windows problem. Haven't had any issues with any other updates.
Any help is appreciated....
So after a month of trying to figure all this out I FINALLY fixed the problem!
Before you do anything just go to your destop > right click personalize (this is for windows 7 - might be different for XP; I honestly forgot, but same idea) > find "window color" > select "advance appearance settings
(I think can be found by just typing "window color and appearance" in the search from the start menu).
Finally select "active title bar" (If the font is SEGOE UI, then following the link is the best thing to do; IF ITS NOT, I would think you can just follow the same steps and modify accordingly to how you want your fonts to look in iTunes). http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-to-change -system-default-font-in-all-parts/dfce15db-7337-420a-a42e-517521a8502e
Hopefully this helps!!! Worked for me!
Similar Messages
-
I am installing itunes to a laptop and have not sync device to this lap. It is saying that it must first restore device. The problem is I have over 2000 pictures and don't want to lose them. Now my phone is in restore mode and I don't know what to do. I don't want to proceed and loose these very important photos of family. What do I do to get it out of restore mode? My phone will not allow me to do anything to it at this point. I have the itunes downloaded on the laptop now. When I push the button for the phone it just shows Itunes and plug. I can't even call or open phone up.
Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
However... Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Jessica Sanchez wrote:
I am installing itunes to a laptop and have not sync device to this lap. ...
Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue. -
I recently upgraded to iOS 7.0.3 and now my iPhone 4S will only sync purchased music to my phone from iTunes. Help! I have TONS of music that I have bought and burned to my computer, but cannot listen to it on my iPhone. This seems ridiculous!
Also, it's taking FOREVER (over an hour) to sync my iPhone to iTunes...
-
I have tried to download iOS7 but the iTunes keep asking me to upgrade iTunes version 11.5 and my one is 11.5 so when I clicked it says no update available. Could you please help me? many thanks.
Hi bodeboni!
You will probably want to download the newest version of iTunes (iTunes 11.1) directly from Apple and install it on your computer if you are having issues updating. The link for the download can be found here:
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?
Hi Guys
Updated my 2 imacs to Maverick yesterday. Schoolboy error on my part not checking if there were problems with any programmes before I did.
Quark is now a nightmare with no short term answer on the way. As a Quark user for over 20 years this is just another reason to hold your hands up and say OK Indesign you win I will have to learn how to use you and Quark will be a distant memory.
I am told there will probably be no solution to getting quak 9 running on Maverick and that you will need to update to 10 in about 2-3 weeks to get back to normal. Having spent a few bob on 2 versions of 9.5 only in Feb this year i didn't really want to upgrade yet.
So its cough up to carry on using Quark or learn Indesign.
I have lost faith in Quark as they are quick to send me e-mails asking me to upgrade to this and that version, why didn't they send one out saying do not upgrade to Maverick. Perhaps they know there loyal follwing will uograde to 10 and will generate a nice little bonus before Xmas.
Lots to do today and will now take 10 times longer to do it. Is this 2013 or 1974!!!!!
If anyone hears of a solution please post ASAP -
i just brought new i phone 5 yesterday and now i can see all paid applications and i dont use or have credit card also now how i can buy applications which are important for me? can i buy them online? or use debit card and trust me all my friends are regretting buying phone because of this problem.Kindly help.Cant it can be deducted from our mobile charges?i would be much easier then
You can buy apps using iTunes Gift cards without needing to register your debit card.
http://store.apple.com/us/personalize/itunes -
i updated itunes 11.1 yesterday and now im trying to get my music on itunes to sync onto my iphone 4s but when i connect it through usb...Itunes is saying " waiting for changes to be applied"? so i dont know what to do cause i just want to sync my music from itunes to my iphone 4s
I had the same problem and the fix was so easy that I felt a little silly after spending 2 hours with an Apple Technician. At the end of it all, what I had to do was make sure ALL music was deleted from my iPhone 5 by going into usage and clearing out the music folder. All I had to do then was turn my phone off and turn it back on again. I had not done this after my phone upgraded to the new 7.0 IOS. What's the first thing you do when experiencing computer problems? Reboot! It fixed my problem and now my iPhone 5 synchs perfectly when I had it connected to my computer. I am also on iTunes version 11.1.
-
I have my iTunes on my PC and have an iPod Classic, I have just purchased an iPod touch and want to load all of my Itunes music onto it, how do I do this and not loose my library, I'm not very computer savvy.
You sync music the same way as on the Classic. What you sync to an iPod does not effect the iTunes library on your computer.
iTunes 11 for Windows: Syncing overview
or
iTunes 11 for Mac: Syncing overview -
I have OSX 10.4.11 and would like to upgrade to Mavericks. Can I upgrade to Snow Leopard or do I have to climb through all the other OS'? Thanks.
Hi, you need 10.6.8 first...
First you need to research all the problems people are having with the higher OSX versions, & make sure you have a bootable clone of what you have just in case.
then you must get 10.6, install it & update to 10.6.8 so you have the App Store to buy & download the huge 10.8 Installer.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA -
I have an old iphone and have a new one as well. I would like to use my old on as an ipod but itunes not longer recognizes it. Any ideas? I have been using it for a month with no problems until tonight. I restarted my computer..still no fix.
Looks like its fixed. I am syncing it now. A lot of the answers are for the new iphone so i had to mess with a bunch of settings as well. My old phone is now an 8 gig ipod. the books app no longer works and that *****.....but better than nothing...
-
I have deleted a song from my library and want to re-download it. When I access my purchased items in the iTunes store, the song has the 'purchased' button next to it and won't let me re-download. Any suggestions for things to try?
While you can redownload most past purchases without charge, you can't redownload movies without paying again. See Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519
-
How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?
If you have iOS 5 installed on it, you don't need a PC. simply turn it on and set it up.
if you don't have iOS 5 then you'll need a computer. -
I did the iTunes update yesterday and now I am getting this message when I try to open iTunes - “This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes. (-42037) Can anybody help me out resolving this?
Download iTunes using the tab at the top of this page, re-install. Back up your computer first.
-
I have all my itunes on one computer and have brought another and need to transfer all my music etc to new one, how do i do this? please help its doing my head in!
Hey allen72,
Thanks for the question. I understand you wish to transfer your iTunes library to a new computer. There are a few different options for doing so, the following article provides more information:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Thanks,
Matt M. -
I upgraded to v3.6.22 today and have lost the ability to ctrl-click a link to open the link in a new tab; how do I get this back?
Strangely enough, putting my laptop into Hibernate mode solved the problem. It didn't even take a reboot.
Running Windows Vista Enterprise SP2.
Maybe you are looking for
-
Difference between upgrdae and migration about oracle database
Difference between upgrdae and migration about oracle database please give the comments
-
I am using a database in my program and I want to be able to create a radio button which is named after a column name- obviously I can't specify the name of the column myself because the number of column may change for each database as well as the na
-
Hi all, we have a requirement to send PO details when new po is crated in SAP, but we need to send only 13 fields from PO , so how to reduce the fields and how map the fields, the below are the fields needs to send to legacy system. EBELN WERKS LGORT
-
5508 WLC redundancy issue.
I am trying to set up fail-over for Cisco 5508 Wireless LAN Controller which is using 7.4 version software. I setup the redundancy port and peer redundancy. While checking,one becomes active and other becomes standby. Its showing everything perfectly
-
Problem in Delivery Split - BAPI_OUTB_DELIVERY_SPLIT_DEC
Dear friends, Iam facing a problem on Delivery Split My Requirement : I have a delivery A with Item 000010 and Batches 10,20,30,40,50 in ERP system. I have a third party system which wil create a new delivery B for this Original delivery A and associ