Upgraded to Itunes 11.0.4.4x64 now I get error -42404
I upgraded to iTunes 11.0.4.4 and now I receive error -42404 (A required iTunes component is not installed). I’ve removed and reinstalled iTunes several times and get the same result. I’ve also tried using the install to repair the program and still get the same result.
After the install, there is not menu item, but there is a desktop icon. How can I either fix this or downgrade to the previous version????
Thank you
Hi OpryFan,
Here is an article of troubleshooting steps for iTunes installation issues, including instructions for thoroughly and completely removing iTunes prior to the installation attempt:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
I hope this helps!
- Ari
Similar Messages
-
I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy -
After upgrading hardware, I restore from Time Machine, Now I get Error 150:30
I have CS4 suite. I don't have the discs with me to reinstall--away from home. I registered the products. Isn't there a way to download it from Adobe? This is crazy because I can open my Acrobat files for a second or two and then a popup says I need to start another component of the suite. When I start another component (e.g., Photoshop) I get the 150:30 error message. Can you help? I read somewhere than I can delete the file /Library/Preferences/FLEXnet Publisher. I can't find this file anywhere. It doesn't exist in the Library folder. I went to the termainal and asked it to show all of the hidden files in Adobe and still can't find it. Any other solutions without a complete re-install.
Hi DrBDM,
Welcome to Adobe community.
On your startup disk, locate and delete the following folder:
[hard drive]/Library/Application Support/FlexNet Publisher/
Important: The path above points to the Library folder at the root of your startup disk, not the Library folder in your user home folder.
To locate this on the Go -->> folder >> type ~/library and then search for this path mentioned above.
If this does not help then follow the below mentioned solution :-
Repair disk permissions
Launch the Apple Disk Utility:
/Applications/Utilities/Disk Utility.app
Select your startup disk.
Click Repair Disk Permissions. Note: Repairing disk permissions can take a long time. For more information about using Disk Utility, see the Apple support website.
Start your Adobe applications.
You can also try other solutions mentioned in the article below
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
In case , you need any further help , kindly let me know.
Thanks!! -
I downloded upgrade of itunes on my computer and now it dosn't work at all. i dowloaded from the web site, but still will not work. can anyone help.
Put it in DFU mode and restore it. (google for instructions on entering DFU mode).
-
I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?
I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple. -
I upgraded iTunes to 11. I now receive an error message which reads - 'The iTunes Library file cannot be saved. An unknown error occurred (-50). How do I correct this error?
Thanks
TDBI know this doesn't help you Bud, but I've had this issue for at least the last couple of versions. If I can ask, what is you enviornment like? Local PC only, libray saved on another PC/Server?
In my case my library is on Windows 2003 server with the share mapped to drive M: This has worked for many years through both XP and Windows 7 until and update a while ago.
Thanks,
Rob -
Upgraded to itunes 8.0 - Purchased Songs now wont play - no error message.
Upgraded to itunes 8.0 - Purchased Songs now wont play - no error message.
You are in that awful authorization loop.
Here are some steps to try.
1. Deauthorize, then reauthorize your PC - it might be using multiple authorizations and this article shows you how to fix that.
http://support.apple.com/kb/HT1206
And make sure you authorize for all iTS accounts, even that old one from 3 years ago you may have forgotten about.
2. Delete the SC Info folder. The entire folder, not just the file. It will get rebuilt the next time you start iTunes. Don't forget to restart your PC, as the article says.
http://support.apple.com/kb/TS1389
3. Get a free single of the week, which has the latest DRM on it, and play a few seconds of it. Sometimes the latest song of the week fixes everything.
And if that doesn't work, contact iTS support from this page - use the Contact Us button.
They will tell you to do the same things; reply back to their canned response.
http://www.apple.com/support/itunes/store/songs/ -
Upgraded to iTunes 8.1.1 and now iTunes does not recognize iPod
I recently upgraded to iTunes 8.1.1 and now iTunes does not recognize iPod. The iPod says "Do Not Disconnect" but the device is not listed in iTunes so it will not sync.
Hey, we are having exactly the same problem! My old ipod died a slow death so I bought a new nano 16gb 4th gen and I can't use it as itunes isn't recognising any ipod being plugged into it. I've been through the whole support database and every USB port is working on the laptop, so I know the computer is recognising its there its just itunes itself - even removed and downloaded it again but no change! If anybody has any ideas what is going on please let me know!!!!
-
Just upgraded to iTunes 11.1.4.62 now my device (iPhone5) won't sync but shows up under Windows Explorer. When I plug the phone in it asks if I want to trust the computer. I say yes but it hasn't asked me that since the very first time I received the phone.
This resolved my issue.
Thank you for the suggestion. This worked for me. No more trust this computer messages and itunes now recognizes my ios7 iphone.
Reinstalling the usb driver in win7 by going to device mgr/ portable devices and then directing the computer to search the apple folder ...
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. did the trick. -
I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010. It worked fine before with iCloud 2.1.2. Any solutions? I'm on Windows 7, Outlook 2010.
HOW FRUSTRATING! NOW WHAT IS HAPPENING? WHEN I GO TO ANY WEBSITE THE PAGE FREEZES. TOP OF PAGE READS, MOZILLA FIREFOX NOT RESPONDING, THINK I"LL GO BACK TO IE, WAY TOO MANY ERRORS AND NO TECH SUPPORT ANSWERS
-
Trying to upgrade my iTunes to 10.5 but I keep getting the message "the URL could not be opened". What do I do?
Use this: http://appldnld.apple.com/iTunes10/041-2598.20111011.9Cp3o/iTunesSetup.exe
-
I am trying to upgrade to itunes 10.7 using windows and keep getting the following error message: "Error writing to file: C:\Config.Msi\364460.rbf Verify access to this dierctory". Help!
Fixed! (win7 64 bit)! Just stop your antivirus during the upgrade/installation (I've got Kaspersky).
Good luck! -
I upgraded my 3gs to 5.01 and now I get the message "iPhone may be damaged and cannot be activated for service." Whats going on? I can't activate my device. It is essentially bricked at this point
Same issue c'mon apple.
-
Why am I now receiving the error 42404: a required iTunes component is not installed after the 10.5.3 iTunes update? Now, I cannot sync my iphone...I have uninstalled and re-installed several times now without any luck.
Thanks,'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)
Maybe you are looking for
-
HT1495 Can I add music from one iPod to another without losing music on the first ipod
Looking for a way to add music from one iPod to another iPod without losing music on the first iPod ... Please help
-
English in Korean Itunes store?
How can I set up my Itunes account to display in English? I am working in Korea and to purchase from Itunes I have to give a valid address, which is in Korea. This changes all my settings to Korean which I don't read! Apple seems to think that everyo
-
I have the original iPad with v3.2.1 and have never upgraded. How can I upgrade to the latest iOSfor the original iPad?
-
BADI triggered in the partner & competetor tab of oppetunity & quote.
Hi, Please let me know 1. which BADI will be triggerd when we choose partner function in the parner/competer tab of quotation and opertunity. 2. BADI triggered in the same tabs when we press enter in the partner field. I am using CRM_ORDERADM_H_BADI
-
Field BSEG-TXJCD settings Optional
Hello I'm trying to make in trx.FB01 field BSEG-TXJCD optional. Actually it is mandatory. Thank you very much for your help Regards Norberto Dangla C