Upgraded to iTunes 6.0.5 sound now clicks and pops.

I've been using iTunes 6 happily up until yeasterday when I was prompted to upgrade to 6.0.5. I did this and now the sound of all of my purchased music is like an old scratched vinyl LP. At regular intervals there are clicks and pops in the music.
This did not happen until I upgraded. Strangely if I play the same tracks in QuickTime Player rather than in iTunes they pay without faults. I've tried changing settings to Safe Mode (waveOut only)and it makes no difference to the quality of the playback.
So, is there any way to revert to the old iTunes installation or is there a fix for 6.0.5?
FWIW, QuickTime Player isn't much of a solution since it doesn't support playlists.

just checking. have you tried working through the other possibilities (apart from the QT sound out settings) from this document?
iTunes and QuickTime for Windows: Songs and other audio don't play correctly

Similar Messages

Upgraded to itunes 8.0 - Purchased Songs now wont play - no error message.

Upgraded to itunes 8.0 - Purchased Songs now wont play - no error message.

You are in that awful authorization loop.
Here are some steps to try.
1. Deauthorize, then reauthorize your PC - it might be using multiple authorizations and this article shows you how to fix that.
http://support.apple.com/kb/HT1206
And make sure you authorize for all iTS accounts, even that old one from 3 years ago you may have forgotten about.
2. Delete the SC Info folder. The entire folder, not just the file. It will get rebuilt the next time you start iTunes. Don't forget to restart your PC, as the article says.
http://support.apple.com/kb/TS1389
3. Get a free single of the week, which has the latest DRM on it, and play a few seconds of it. Sometimes the latest song of the week fixes everything.
And if that doesn't work, contact iTS support from this page - use the Contact Us button.
They will tell you to do the same things; reply back to their canned response.
http://www.apple.com/support/itunes/store/songs/

TS1363 Just upgraded to iTunes 11.1.4.62 now my device (iPhone5) won't sync but shows up under Windows Explorer.

Just upgraded to iTunes 11.1.4.62 now my device (iPhone5) won't sync but shows up under Windows Explorer. When I plug the phone in it asks if I want to trust the computer. I say yes but it hasn't asked me that since the very first time I received the phone.

This resolved my issue.
Thank you for the suggestion. This worked for me. No more trust this computer messages and itunes now recognizes my ios7 iphone.
Reinstalling the usb driver in win7 by going to device mgr/ portable devices and then directing the computer to search the apple folder ...
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. did the trick.

Since upgrading to itunes 11.1.4.62 my iPad and Ipod will not sync

Since upgrading to iTunes 11.1.4.62 my iPad and iPod are no longer recognized by iTunes when plugged into my Windows 8.1 PC? I have re-downloaded itunes and re-intalled/repaired the program but still will recognize the two. This has never been an issue before have always sync the two and the only change has been the most recent upgrade of itunes?

I had to set up an admin user account on my pc after trying to restore my phone after ios 7 nearly broke my pc. I used the admin account to delete all apple stuff as instructed and installed 11.1.4. Hate the new look and all that was left was some old stuff i had bought on itunes.Anything less than about 2 years old and my extensive vinyl library i had uploaded all gone. i back up every week. i found some music in the recycle bin and it took hours to restore that but i was still missing loads. I plugged in my 3rd gen touch. All my sync settings were gone and it would not let me change them, it was all unticked so sync wiped my touch. i tried again but still wouldn't let me select anything and said duplicate names were specified, my options were to erase the touch, overwrite the library on the pc or cancel. So a disaster. Then I logged in under my usual user id where i had failed to download the new itunes and my old library still existed - shame i cannot back up or sync anymore here either. The only thing i could do was restore my wiped touch as i still had a back up left here. whenever i plug in i get the duplicate names specified message erase or cancel and i can't change the settings which are all unticked here too. I think itunes can see my admin account library and my usual account library and can see they are not the same and this is the duplicate names problem
i would like to know how i can get my music out of itunes safely on to my computer so i can play it on something other than itunes.
Unfortunately my iphone is on orange so i am cursed with that too and their latest service issues have destroyed my battery. I can't get a new phone though becuase i won't be able to restore to get my stuff on to new phone becuase of this duplicate names error.
Apple have really messed things up for me - please can you tell me how to get my music out in a format that will play on other players and i suppose i will just have to write off the £50 credit i have in tunes but i cannot carry on with these disasters and apples indifference

Clicks and Pops with Apogee Ensemble/Duet since upgrade to OSX-ML

Problems with Clicks and Pops in Logic 9 (9.1.8 64 bit) since I upgraded to
Mountain-Lion (10.8.2) Does not really matter if I change the Buffer from 128
to 512! It is not very often but not acceptable. I made an additional
setup with external HD an installed SnowLeopard again. With this
OS-Version I can run without any problems with Buffer-Sices 128 or 64. Same
problem I had with my DUET as well. Would switch back to SL but some
of the programs I bought from Apple are not compatible with older OS
than Mountain-Lion. I also made a complete new ML installation from
scratch with only Logic Pro 9 and the needed USB-driver for my
Yamaha-CP1 but still the same thing. I do not see any
processor-Problems. I have an iMac (Mid 2010, 2,8Gh i5, 16 Gbyte Ram,
512 Gbyte Crucial SSD) Strange thing is that if I change the amount of threads used from
"Auto" to anything else it seems that the amount of Clicks will change for a
while. But it is not really reproducible and after a short time it reapears. Any idea what I can do to
fix this problem? Could it be that the driver is not that stable than
it was under SL?
Apogee Support told me after some correspondence more or less, that I am the only one with this issue... ?!?!?
I already changed cables, switched to USB-Keyboard instead of bluetooth, disabled WLan, installed a 2nd Harddisk and reinstalled the OSX and LOGIC a couple of times without any effect. The only way to get the Ensemble or the Duet working ist to switch back to SL which can't be the solution as it should be fully compatilbe with Mountain Lion. At least this can be read on the support pages fom Apogee!
Is there anyone with the same kind of problems?

Ok, folks...finally figured it out. Thank you so much for being willing to brainstorm with me on this. Here's the deal:
As I was searched online forums I found some discussions regarding different firewire chips they put into different models of the macbook pro's. Apparently you can have the TI (texas instruments) chip or the Lucent chip, you can discover which by holding down 'apple' and 'S' right after the welcome sound when you're booting up your MBP. As you search through the info it should say TI or Lucent by firewire.
Apparently, the Lucent chip is known for causing issues with different devices...this is the chip I have in my MBP. Someone on another forum said they bought an external firewire bus and just put it between the computer and interface and it solved the problem...so I thought 'what the heck.' I went and bought one and it worked perfect! Crazy.
So, now I need to talk to apple and i'm hoping they'll be willing to swap my chip for a TI one or at least cover the cost of the firewire bus.
Thanks again for helping me out. Hopefully this thread helps the next guy so he won't have to spend 3 months troubleshooting like I did.
God bless

Strange Problem - iTunes audio clicks and pops when connected to internet

Hello,
I have a very strange problem.
When I go to play a song in iTunes the audio clicks and pops. Not an uncommon problem I know, but here is where things seem to get strange.
I'm using iTunes on a laptop so I have a little switch which allows me to turn off my wireless adapter thus disconnecting me from the internet.
If I'm connected to the internet the audio clicks and pops but if I'm disconnected the audio plays smooth as it should.
The problem arrived out of no where i.e. no changes made to the laptop like installing drivers or programs.
I'm completely lost at what to do and after weeks of searching online I just had to ask to see if anyone here can help me.
Thanks

Since writing this article I read that there is a problem with the airport update for tiger 10.4.11, which is exactly what I'm running. This is a pretty serious issue because I can't even listen to streaming music off the internet (via my firebox) without major clicks and pops. I wish I turned my updater of when things were stable

Upgraded to Itunes 11.0.4.4x64 now I get error -42404

I upgraded to iTunes 11.0.4.4 and now I receive error -42404 (A required iTunes component is not installed). I’ve removed and reinstalled iTunes several times and get the same result. I’ve also tried using the install to repair the program and still get the same result.
After the install, there is not menu item, but there is a desktop icon. How can I either fix this or downgrade to the previous version????
Thank you

Hi OpryFan,
Here is an article of troubleshooting steps for iTunes installation issues, including instructions for thoroughly and completely removing iTunes prior to the installation attempt:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
I hope this helps!
- Ari

I had to upgrade my itunes because of my new iphone 5s and now i uninstalled old itunes and the new itunes wont install

I had to upgrade my itunes because I got an iphone 5s so i deleted the old itunes and tried to reinstall the new itunes and it wont install because it says the network resourse im trying to use is unavailable and that i need to choose a different location or path for the new itunes to verify i can use the path where it was going to go. My internet connection is fine and working properly. I dont have the old version of itunes because i tried to unistall it but it didnt completely uninstall from my computer but i still cannot open the old verison of itunes. I just want to get some version of itunes back so i dont lose all my itunes stuff. Any suggestions?

it wont install because it says the network resourse im trying to use is unavailable
Which particular .msi file (or files) does the message (or messages) go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

How do I eliminate clicking and popping in .wav sounds?

I tried importing a .wav file for background music in my Director movie. The .wav file is about 3 minutes long, and when I publish a projector I hear incessant clicking, popping, and skipping. What's the best way around this? Thanks in advance.
[EDIT] Just now I tried substituting an .mp3 for a .wav -- it made no difference; popping, clicking, and skipping were still there.

http://bit.ly/AW1Bz
link to yousendit.cm -- file is 10.5 MB. i only get 100 downloads here. let's hope that it's enough

It kept bugging me so I upgraded to ITunes 10.4.1. Now I can't get any sound from the internal speakers or my headphones. Any ideas?

I'm using a Macmini with Snow Leopard. Everything is up-to-date according to the software updates manager. Can I go back to the previous version? I work from home and have very noisy neighbors so my music allows me to stay focused. Thanks for any suggestions.

Two suggestions:
1. Check iTunes volume (the slider left of the progress bar). It's separate from the system volume.
2. Often, speaker problems can be resolved by resetting your computer's PRAM. This explains how: Resetting your Mac's PRAM and NVRAM, http://support.apple.com/kb/ht1379

Upgraded to iTunes 10.4.1 on Windows 7 and now my iPhone 4 won't sync.

I know that there are many issues with this upgrade but was wondering if anybody had this specific problem and has a solution. The message I get from my laptop is that there is insufficient space on the disk which is patently wrong - there is ample space. What can I do because my iPhone data is no longer being backed-up?

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
If you have a 2G iPod. that can only go to 4.2.1. The 1G iPod can only go to 3.1.3. I supose that you have one of those and by support, I think Apple meant that they will issue no more updates for those models. The iPod will continue to work with iTunes.

Upgraded to iTunes 11 on Snow Leopard, now won't recognize iPod Touch 2G?

iTunes 11 doesn't seem to want to recognize my iPod Touch 2nd Generation. Tested out my iPod Nano 4G, and it connects fine. I've tried rebooting the Touch and restarting my computer, but to no avail.
Any suggestions?

Hi Parraga,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Judy

Upgrade australians itunes so we can dowload tv show and movies

I was just browsing the itunes in usa and couldn't download TV shows or movies and on top of that its not even available in Australia I mean the shows are out over here and I cant download them correction not even available on tunes why cant we have some equality around here I mean if you can’t view material from other countries and yet we can surf to official websites in other countries then why can't we buy them I mean we pay for the item in the end. Anyway, I hope one of the people who made itunes can fix this problem because I think that would be the best upgrade

As I told you on your other post, the copyright holders for TV content is Australia must allow Apple to distribute TV content in the Oz store. Until the copyright holder allow that, there is nothing Apple can do.

Upgrade to itunes removes last 6 months of apps and podcasts

Since the itunes update from June or July 2011, my itunes reverts to the same 130 podcasts I had at that time anytime I have to turn itunes off or we get a new upgrade, such as the one this week. Also, does not recognize any new apps or app updates since then. Each time I turn it off or update it, I have to sync to find my current podcasts, get rid of the old ones, and update apps; we are up to 43 apps that need updating each time this happens. I am using Mac OS X version 10.6.8. Anyone have any experience with this? Thanks!

You need to have two separate iTunes Store accounts, one in the UK iTunes Store and one in the US iTunes Store. To set this up will require having two different email addresses and either two credit cards, one issued in each country, or the use of prepaid iTunes cards issued in the appropriate country.
Otherwise, it is possible to change the country of the iTunes Store (again assuming you have a UK and a US credit card), but it would be rather awkward at best to do this multiple times per year and may even be rejected after a change or two. Better to have two separate accounts, I think.
Regards.
Message was edited by: Dave Sawyer

Itunes reset itself- authorized songs now unauth and says 5 of 5. why?

i bought music from itunes store w/ a gift card from xmas. my power cord got accidentally unplugged and my laptop died. when i rebooted, my itunes had reset. i had to reimport the whole library, and now songs that were once authorized on my machine are now coming up that all 5 of 5 are authorized- even tho this machine is one of the 5!
somehow, in the mix, the first album i bought seems to have dissapeared (i have over 150 gigs of music, not sure what happened. just recently noticed it was gone). When i go to 'purchased music' it only remembers what i've bought since i had itunes crap itself and reset.
what gives?
itunes music purchasing really *** sometimes.
powerbook g4 Mac OS X (10.4.3)

When you reach the limit of 5 authorisations you have the option once a year to deauthorise them all in one go and start over:
About iTunes Music Store Authorisation and Deauthorisation
http://docs.info.apple.com/article.html?artnum=93014
You can delete your "Purchased" playlist and create a new Smart Playlist and set as rule:
Kind - contains - protected
This playlist then will contain all your purchases and always will be up-to-date.
When you make a new purchase, your 'Purchased' playlist appears again, you can then add your previous purchased music to it.
Although the 'Purchased' playlist is a special one, it behaves like a normal playlist and you can in fact add and remove anything.

Upgraded to iTunes 6.0.5 sound now clicks and pops.

Similar Messages

Maybe you are looking for