Upgraded to Lion and now getting error 51 when trying to use Cisco VPN Client.

Mac mini with Snow Leopard not having same issue, VPN client works fine. What happened?

Try uninstalling then reinstalling the Cisco software. Cisco VPN may not be compatible with Lion. Check with them about compatibility or upgrade.

Similar Messages

I upgraded to lion and now iPhoto just hangs, I tried clearing out all content but still same I need this app for my business please help

I upgraded to Lion and now iphoto hangs ( I have an intel imac 4gb 2.66 ghz). Tried wiping all content but no change , maybe third party plugin? But how do I know which one? Better question is: is there a known plugin causing trouble?

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists.
If you can't create and open a new, test library make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
If you can create and use a new library the problem lies with your current library. In that case make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I have windows xp and a 1st gen. shuffle. Loaded 10.4.1 last night and am getting error 50 when trying to load my shuffle. I used utility reset to restore fact. settings. Still getting error 50..Help!!!!!!!!!!

Help!!!!!! I'm about going out of my mind....Need help loading music to my 1st generation I pod and keep getting error 50 message. I have windows xp and loaded new software last night. This all started when I upgraded to itunes 10 awile ago. My computer recognises my ipod and I think its syncing don't know...My library is intact and can't load any music from my library...purchases...or gene ....itunes 10 wiped my custom play list...and now nothing...I used ipod reset utility to restore my ipod to factory settings and still nothing....I don't have alot of computer knowledge and need someone to walk me threw on what to do. I'm at a loss. And about ready to give up on Apple and the I-tunes experiense....I am in dire need. Help!!!!!!!!!!!!

Hi and welcome to the forums!
A couple of places for you to visit: Blackberry 101    Tips & Tricks
See if this kb helps:   http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB12847&slic...
I'm not sure that you saw the error msg. included in the kb, but it discusses removing .msi files from previous installations of DM.   Post back and let us know how it goes.
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

My iphone 4 gsm stuck in recovery loop and I get error message when trying to recover thru itunes, error message 1602. help!!!!

I removed the battery in my att iphone 4 (gsm) osi 6.2? when i turned phone on i got pug into itunes screen. I did that and it said phone detected in recovery mode click update recover butten so i did. everything started liek t was working, i tunes showes verifing with apple but never make it past that point. itunes gives error message 1602. tried fixes, got error 22 tried fixes got error 11, tried fixesand got error message 1602. i then got advice from friend who wrks with iphones. told me get inrecovery, turn off. take out battery for min at least and put back together nad then try. i could not turn it on so plugged into wll charger and screen showed osi 6 and slide bar. slid bar and asked for my pw. put in and low and behold icon on screen telling me to plug into itunes. Did that and got error messge 1602 again and itunes neer went past verifing with apple.

Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

Loaded the newest IOS and I get error message when trying to load I messaging and Facetime.

I have an Ipad mini 2 and I downloaded the software update IOS 8.1.3. Now when I try to use facetime and I-messaging it gives me an error message : (An error occurred during activation. Try again.)
I have tried turning the applications on and off, I have turned off the I pad and restarted it. I made sure I was on the Wi-Fi. I even made sure the date and time zone were correct. None of these things have made any difference.
Does anyone have a fix for this problem. Is there a way to reload the last IOS update? Any help would be appreciated.
Peter

Hey Peter Manring,
It is my understanding that you are receiving an activation error when attempting to use FaceTime or iMessage. I have an article that should be able to help you address this issue, and it can be found below:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
http://support.apple.com/en-us/HT201422
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Why do I keep getting error -65581 when trying to use a cRIO 9024 and c series modules

I am simply trying to send out a digital high on DIO0 of a 9401 c series module and I get the following error every time.
Error -65581 occurred at Shared Variable in Send True Value Out.vi
Possible reason(s):
CompactRIO: (Hex 0xFFFEFFD3) The FPGA personality currently running on the CompactRIO chassis does not support the RIO Scan Interface in this slot.
This error or warning occurred while writing the following Shared Variable:
\\NRL-CMG-cRIO\NI 9401-1\DIO0
\\170.126.209.52\NI 9401-1\DIO0
Any help would be greatly appreciated.
Nate
Solved!
Go to Solution.

NMAYO,
In your project view can you right click on the chassis in the cRIO and make sure that it is set for Scan Mode and not FPGA mode? Also, In the measurement and automation explorer you can check the cRIO and verify that it has Scan Engine Support installed on it. The tutorial below shows how to reformat a cRIO and install software on it, the later steps on software will allow you to check your cRIO.
Reformatting a CompactRIO Real-Time Embedded Controller
Ben Sisney
FlexRIO V&V Engineer
National Instruments

Getting Error Message when trying to use Software Update in the Mac App Store...

Hello,
I was wondering if someone knows what this error message in the Mac App Store means. I am trying to run Software Update by clicking in the Apple Menu however, I am not able to see my available updates and instead get the following message on the Mac App Store:
I have tried to fix the error by deleting both the Mac App Store Caches and plist files in the user library and made sure that I am properly logged into the Mac App Store with my personal Apple ID.
What else can I do?

aayushp wrote:
I've been having the same issue. It was all fine until yesterday when I was searching for updates.
Since when have you been seeing this error message?
Last time I checked for an update was about 2 weeks ago and there were no errors reported. However, today I wanted to update iTunes to version 10.7 and decided to use the standalone installer rather than the SU version. Still, I decided to run the MAS Software Update function in order to ensure that my computer had all its software up-to-date and then I get this message. I don't think that me installing iTunes is to blame. Probably, it could be an internet connection problem on Apple's end I am still submitting a bug report to Apple.
Now one question, who is your ISP (internet service provider)? In my case I have Comcast and I am in Florida.
Thanks for your reply!

Getting error message when trying to add apple id to facetime and imessage, getting error message when trying to add apple id to facetime and imessage

When I try to add my Apple ID to Facetime or iMessage, I get an error message "username or password is incorrect " even though its the same username and password I use for everything else.
anyone else getting this problem?

The Order has got 5 lines. First 4 lines are product lines and the 5th line is a service.
We have a customized form called mass order change which will bring only the product lines when we query a order. We usually do the mass update of shceduling date
and promise date in that form for all the order lines or for some perticular lines in that order.
For one order when i tried to update the scheduling date and promise date its showing this message. Not sure why??.. i have checked the form logic and the package which this form is using but all of them are calling the standard API process_order to change the sales order. I found out that This message is a standard Oracle message : OE_SCH_OVER_ATP_NO_SCH_ACT. I tried to find this message in process_order API but could'nt find this message. status of these 4 lines are : Awaiting Shipping
Thanks and Regards,
Ragni Gupta
Edited by: 921176 on Jan 21, 2013 5:17 AM

I'm getting error 4001 when trying to use itunes match, I'm getting error 4001 when trying to use itunes match

Hi can anyone help with the error message I'm getting?

Any idea how to upgrade to that version? When I go to my About iTunes menu it gives me this:
But when I check for updates I get:
Any ideas? Thank you very much in advance.

Why do I keep getting error 4100 when trying to use iTunes Match?

I just can't get iTunes Match to work. It finishes Step 1 (Gathering Info), but then on Step 2 it errors out saying there was a problem of some sort with iTunes.

Any idea how to upgrade to that version? When I go to my About iTunes menu it gives me this:
But when I check for updates I get:
Any ideas? Thank you very much in advance.

I get error message when trying to use Firefox Sync after upgrate to 5.0. The message reads: "Sync encounted an error while syncing: Unknown error. Sync will automatically retry this action" I am using Windows 7.0 on a stationary computer.

Simply: Firefox Sync doesn't work after upgrade to 5.0.

You can have a try, unmark the Tabs in Sync of Preferences.

Error message when trying to use media players on new T500 ( drivers? Other?)

Getting error messages when trying to use Windows Media Player or InterActual DVD player to play DVD or play Audio files.
Downloaded latest audio & Video drivers from Lenovo site , Windows XP 3 patch and latest apps from Win MP and InterActual...
Any further ideas? Help? :-)

Hello,
Thank you Community Members for providing a troubleshooting tip. It is very much appreciated. First, you want to make sure that your system meets the minimum requirements, which can be viewed at the link below:
VCAST Media Manager Specs
Next, uninstall the VCAST application and reboot your computer.
Then, disable your firewall and antivirus program and download the VCAST Media Manager application again, which can be found at the web link below:
VCAST Media Manager
If you are still having trouble with this service, it will be necessary to contact our Technical Support team directly. Please call 1-800-922-0204, option 3, from an alternate phone and be in front of your computer if you need to call.
Thank you.
KellyW@VZWSupport

I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

If you upgraded and were using a version of Acrobat Reader that was legacy, that is PPC compatible, then you will have to upgrade to a version compatible with Lion as Lion no longer has Rosetta to interface with the legacy software.
I know that Acrobat, full version, 10 works with Lion...use it myself.

Question: i upgraded to Lion and now itune upgrade will not install (error message appears)

i upgraded to Lion and now itune upgrade will not install (error message appears)

iPhoto needs to be upgraded in order to work with Mavericks. You can do that via Software Update or the App Store.
The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
Upgrading iPhoto does not involve your iPhoto Library. Your photos will still be there. But it never hurts to make a backup first.

HT3258 Upgraded to Lion and now I can't get my monitor to work

I just upgraded to Lion and now I can't connect to my Dell monitor. I am using a MacAir. I have tried chaning the input. But that didn't work. Any suggestions?

That was a widely publicized fact, it is a good idea to always check compatibility before upgrading. Your options are to go back to SL or find another app.

Upgraded to Lion and now getting error 51 when trying to use Cisco VPN Client.

Similar Messages

Maybe you are looking for