Upgraded to Mavericks now Aperture not supported

I finally upgraded to Mavericks, and now Aperture not supported and getting this message. No upgrades are available in the iTunes/App store either. Any suggestions?

If you did not buy Apeture from the AppStore, you can download an update to Aperture 3.4.5 from the Apple Support Downloads page:
Aperture 3.4.5
Backup your Aperture library before you run the update installer and open Aperture for the first time. The upgrade from AP 3.2 to 3.4.5 will upgrade your Aperture library to a new format and that will completely rebuild the library. It is safer to have a backup. Aperture needs to be installed in the "Applications" folder, not a subfolder of Applications, and be called simply "Aperture" without any add ons.
After that try again to update to Aperture 3.5 from the AppStore. If you did not buy from AppStore, this update will change your Aperture licence to an AppStore licence, so be sure to sign into the AppStore with exactly the AppleID that you want to use for updatig and buying software.
For some posters here the Aperture 3.5 update was not visible, unless the primary sytem language was set to "English U,S," and the region to "United States". If you are living in a different country, try to change the "Language & Region" settings in the System Preferences and restart the system, before tring to update.
That should also trigger updates for the iLife apps and iWork.

Similar Messages

I started os x upgrade to Maverick, it's not loading correctly. It was that slow I had to keep it loading over night. Still no success. Tried again still the same.requesting support I'm prompted to give my serial number, not recognised?

I started os x upgrade to Maverick, it's not loading correctly. It was that slow I had to keep it loading over night. Still no success. Tried again still the same.requesting support I'm prompted to give my serial number,Hard wear nuber from my MacBook Air. Just states 'Please enter a valid hardware serial number, excluding accessories' I copied and pasted my serial number. Any advise would be grately appriciated .
Thank's in advance.

If the message that comes up is in several languages, you're getting kernal panics. See Dr. Smoke's FAQ at http://www.thexlab.com/faqs/kernelpanics.html . Many times, kernal panics are caused by bad or failing memory. When you click on the blue apple and about this mac, does it show the memory size you think you have installed? There are other reasons for kernal panics, and the FAQ will walk you through them.

Any problems upgrading to Mavericks using Aperture 3.4.5?

Are there any known problems upgrading to Mavericks using Aperture 3.4.5?

Are you asking if there are problems running 3.4.5 in Mavericks or if you have 3.4.5 now and upgrade to Mavericks and Aperture 3.5 are there problems?
The first case can;t happen you have to upgrade Aperture to 3.5, 3.4.5 won;t run in Mavericks.
As for the second case, most users have not had any major problems as long as they follow the upgrade guide; repair you library while you still have access to 3.4.5, make sure you have backups, etc.
However if you current setup using a NAS in the Aperture workflow you will need to rethink it. It appears that 3.5 will not even allow referenced masters on the NAS (the library always had to be local).
regards

Upgraded to Mavericks now iTunes screen is a negative. Background is black and titles etc. are white. How do I reverse it?

Upgraded to Mavericks now iTunes screen is a negative. Background is black and titles etc. are white. How do I reverse it?

Hello Tarpon471,
It sounds like your desktop is otherwise colored normally, but the colors in iTunes are inverted. I was thinking it is possible that a 3rd party plugin may be causing an issue with iTunes since the upgrade to Mavericks.
Try the troubleshooting in this article named:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/ts3430
Thank you for using Apple Support Communities.
Regards,
Sterling

I have an airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?

I have a new airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?

Welcome to Apple Support Communities
If you purchased the computer before 2010, your computer hasn't got Thunderbolt, so you can't use it

My July 2009 iMac with OSX Mavericks "iMac is not supported" when I tried to perform bluetooth with my iPhone 5. What is the problem. thanks

My July 2009 iMac with OSX Mavericks "iMac is not supported" when I tried to perform bluetooth with my iPhone 5. What is the problem. thanks

Bluetooth is only supported for tethering.
Barry

HT6114 i upgrade to mavericks, now camera capture, contacts, calendar, preview, even the app store, sorftware update doesnt work!!! what i can do? thanks

i upgrade to mavericks, now camera capture, contacts, calendar, preview, even the app store, sorftware update doesnt work!!! what i can do? thanks

Click -> iSight camera failure after OS X 10.9 Mavericks update
A fix for your camera will probably fix your other problems, too.

Mavericks-updated QT now does not support chapter exports!?

Hello,
For the last few years, I've been able to take a .mov edited in Prores 422, with FCP, and save as a master. Then, I'd open that file with Quicktime, and export as 1080P.
The result before tonight has been a moview with H.264 encoding (considerable smaller than 422), with 'text', or Chapter Markers.
Example of file info: Apple ProRes 422, Linear PCM, Timecode, QuickTime Text
Now.. after installing Mavericks.. the same process just creates 'AAC, H.264'.
The text codec has been stripped.
1) Is there a good workflow, or do I have to install metadata hoot.. or handbrake?
2) Can I roll back to a quicktime version prior to the version Mavericks has tweaked.. and still keep Mavericks?
Please help. Thank you in advance!
~Bob

Been getting the same errors for a while.
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X40000, file attrs
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X0 time attrs
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X0, size attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X40000, file attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X0 time attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X0, size attrs
Believe they are related to random disconnects from the file server (10.9.5).

I upgraded to Maverick's Aperture on an older machine.

Mavericks did not function well, so I had to revert to an older version OS 10.8.5 . but now aperture tells me that the library is in a newer version.
I have done both a rebuild and repair, it works fine, till starting up again, then the error message appears.
Any help would be appreciated.

I do have genuine sympathy with your predicament, but blaming it all on Apple is not going to get you anywhere, you have to take some of the blame yourself.
Your backup strategy is not good. Having daily clones only means you have clones of potentially corrupt or unusable data. People need some longer term backups that let you revert to a working state. This is what time machine is for.
Even if you want to blame it all on Apple and switch from Aperture/Apple, your existing strategy could still bring you more trouble in the future. You really need to learn from this.
The forced obsolesence may seem frustrating, but it pretty much has to work this way for the sanity of all concerned.
Aperture is a non-destrutive raw processor, metadata based organiser, and image editor. It keeps huge quantities of data in a very complex inter-related system with enormous cross technology inter-dependencies (XML data, plists, sql databses, various caches, numerous OS frameworks, and so on). It is just not a simple document based editor (and even simple document editors can have trouble with backwards compatibility, warning you that some formatting will be lost if you don't use the latest file structures for saving).
It would be horrendously difficult to try to maintain database compatibility for all previous versions because the database structure and other elements change to support new features. Programming time and bugs would increase massively. Testing for the various combinations; eg a 3.5.1 library with 3.4.2 and 3.3.1 and 3.2.1 etc would increase exponentially with each version, as would the chances of your data getting corrupted by incompatibilities missed in testing.
The real issue here is Mavericks and your backup process. You made a decision to upgrade without the full ability to go back. And then you went back. Aside from the warning screen, what else could Apple have done to help?
Used a crysal ball when they wrote 3.4.5 so it would somehow know how to revert to an as then unknown format (3.5.1) back to 3.4.5?
Allow 3.4.5 to use a 3.5.1 database and potentially corrupt it?
Stop updating Aperture?
What is it you think they should have done?
Andy

Need help: just upgraded to Mavericks, now can't use audio interface.

I just upgraded to mavericks, and now Itunes and my other programs don't recognize my audio interface.
It's a MobilePre USB preamp. I tried uninstalling and re-installing the driver without success. Interesting, QuickTime sends audio to the external preamp, the sound is filled with static. I've tried playing with latency, but that doesn't help.
I can't understand why Quicktime recognizes the external device, but Itunes doesn't. Suggestions are appreciated.
My machine is 21.5 inch late 2009 model with a 3.06 GHz Intel Core 2 Duo processor and 12 GB of RAM.

Hope this references the equipment you are using.
The last update to the drivers is 1.1.3 Nov 2012
http://avid.force.com/pkb/articles/en_US/download/MobilePre-Drivers?popup=true&N ewLang=en&DocType=1450&q=MobilePre
If this is correct perhaps an email to Avid could help. I would think that they need to update their drivers to suit Mavericks.
There is also a link on that page to an article about Pro Tools and state that it is not supported on Mavericks at this time.

After upgrading to Mavericks, iPhoto does not work

I have an iMac early 2011, with dual hard drives. After upgrading to Mavericks, iPhoto and several other apps are no longer "installed". The following apps have a white circle with a line through it in my main Applications folder on my primary hard drive: Calculator, Chess, Font Book, iChat, iPhoto, Mail, Photo Booth, Preview, Safari, System Prefernces. Also, under the Utilities folder, these are inaccessible: Activity Monitor, System Information, Disk Utility.
I tried following this thread's advice: https://discussions.apple.com/thread/5539268
I had iPhoto 9.3.2 on my main drive. I downloaded the 9.4.3 upgrade from here: http://support.apple.com/downloads/#consumersoftware
When I try to install, I get the following message: iPhoto 9.1 or later is required to install this update. Where did my software disappear to?
Every Apple upgrade so far has been a nightmare. A previous upgrade of iPhoto bricked the computer and had to bring it to professionals to fix. I am dreading the 10.9.2 "critical upgrade" for the OS that keeps poping up. The Mavericks upgrade also wiped out my Adobe Creative Suite install and several other apps.
Any help would be greatly appreciated.

You need iPhoto ver 9.5.1 to be Maverick compatable.
Use the software update, look for the new app in your Applications folder along side your old versions of iPhoto. Drag the new icon down to the Dock.
Moving from 10.6.8 the old PowerPC apps are no longer supported. I believe Lion you could still run the Rosetta to keep the old ppc apps alive. No more with Mountain Lion and now Mavericks. Sooner or later you have to keep up with technology and keep apps up to date.
https://discussions.apple.com/docs/DOC-6161

I upgraded to Mavericks, now I cannot use my External Hard Drive

I have a 13in 2009 MacbookPro that I recently upgraded to Mavericks, and since the upgrade I am unable to mount my Toshiba External Hard Drive that prior to the upgrade worked wonderfully with this computer. The HD still works with my Windows PC. I have run Disk Utility and it appears but is greyed out and says it needs to be repaired if I try to mount it, but repairing has done nothing to help.
I need to get my HD working with my MacbookPro again. Please help me.

Welcome to Apple Support Communities. We're users here and don't speak for "Apple Inc."
Since you say you are using your drive with a Windows PC also, were you using a program such as NTFS for OS X that now needs to be upgraded to work with OS X 10.9 Mavericks?
http://www.paragon-software.com/home/ntfs-mac/

Since I upgraded to Mavericks Mail does not work at all

I upgraded to Mavericks yesterday (10.9.1) and now Mail simply will not work. The first time I opened the app it said it was upgrading messages and spent a while working on that. I did not interrupt the process but then it crashed and now it does not even start up.
I have repaired disk permissions and restarted in Safe Mode but it didn't help.

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Updated Firmware WRT54GS V7...Now Router "Not Supported"

Hello all. Just bought a new WRT54GS V7. Set up per instructions and it worked flawlessly. Detected both wireless rigs without a problem, and wired rigs worked. Decided (as I always do) to upgrade the firmware to the latest update. Got the latest .bin file for version 7, etc. Followed update instructions to the letter, including pressing the reset button for 30 seconds. Now, when trying to set up the network again, I get to the point of EasyLink trying to find the router, and I get the message "Router not supported. Easylink Advisor is designed to set up Linksys networking products.....". I re-downloaded the file in case of corruption...three times actually. Repeated the entire process with each. Still same problem. Now, I know that pretty much everything, including this router, says not to update the firmware or bios unless you are having a problem. No, I wasn't having a problem, and I guess for the first time I should have paid attention. Any suggestions/solutions? Thanks in advance.

Disable all firewall first on the computer ..... again download the .bin file from the website ....
Save it on your computer .... access routers setup page & try to upgrade the firmware again ..... make sure that you are picking up the correct file ....
After upgrade reset & reconfigure the router ....

Upgraded to mavericks now some function controls are missing e.g. no add icon in reader

i upgraded to mavericks and now some function controls are missing e.g. add - clear etc. missing in reading list .anyone help?

You may find these articles useful:
http://support.apple.com/kb/PH14176
https://discussions.apple.com/docs/DOC-6162
Ciao.

Upgraded to Mavericks now Aperture not supported

Similar Messages

Maybe you are looking for