Upgraded to MDT 2013 - old deployments not working - parse error - copyprofile error

I upgraded from MDT 2012 U1 and Waik to MDT 2013 and ADK 8.1. My windows 7 deployments quit working after the upgrade. I installed ADK 8.1 and upgraded 2012 to 2013 then upgraded the deployment share. Since the upgrade I am getting copyprofile errors
when MDT is trying to sysprep the machine then I am in a reboot loop. Not sure what changed. The error is "windows could not
parse or process the unattend answer file for pass [specialize]. The settings specified in the answer file
cannot be applied." In the setup log files it says the copyprofile could not be done. The deployments all worked before the upgrade. Any ideas? Thanks.

Thanks for your reply. My DISM file doesnt tell me anything. It is not at the location after the system reboots. The exact message I get is
Windows could not parse or process the unattend answer file for pass(specialize) The settings specified in the answer file cannot be applied. The error was detected while processing settings for component Microsoft windows Shell Setup.
I get this message from all of my windows 7 images when trying to apply them. These were okay until I updated the deployment share for MDT 2013. Under the shell setup in the unattend.xml I have
BluetoothTaskbarIconEnabled (blank)
ComputerName (blank)
CopyProfile True
DisableAutoDaylightTime false
DoNotCleanTaskBar True
ProductKey (blank)
RegisteredOrganization CompanyName
RegisterOwner CompanyUser
ShowWindowsLive false
StartPanelOff (blank)
TimeZone Central Standard Time
Something in the unattend.xml that 2013 doesnt like perhaps?
Thanks..

Similar Messages

Since upgrade to MDT 2013, can't capture Windows 7 image.

Hi fellas,
I use Virtual Box to create a 32- and 64-bit reference Windows 7 VM, which I then capture using an MDT Sysprep & Capture TS. This worked without a hitch using MDT 2012.
I recently upgraded to MDT 2013. Since then, after the VM syspreps and reboots, I get a boot manager error saying Windows failed to start. Status: 0xc0000260.
Not sure where to look for any logs. What I've done so far:
- Upgraded to latest version of Virtual Box (4.3.18)
- Rebuilt both VMs from scratch.
- Deleted and recreated the deployment share and Sysprep & Capture task sequences.
Stumped for the time being, although I could always just boot to my Win PE disc and manually capture with imagex. But c'mon.

Thanks for your input, but this is indeed a configuration issue, and it makes sense.
Vbox VMs are configured according to the guest OS installed on them. For my Windows 7 x64 VM, it's configured of course to run as Windows 7 x64. In the MDT 2012 environment, the Windows PE version
was 3.0, which is based on Windows 7, and hence the VM could boot to it since it was configured for it.
But MDT 2013 uses PE 5.0, based on 8.1. The VM crashes or throws an error when trying to boot the PE 5.0 boot image. I went into the VM's settings and changed the Guest OS to 8.1 x64, and it booted successfully to Windows PE and captured the
image according to the Sysprep & Capture sequence.
Sorry for the wild goose chase fellas. This should've been the first thing I checked.

Unable to capture images since upgrade to MDT 2013

I recently updated MDT 2012 to MDT 2013 to enable support for Windows 8.1. Under MDT 2012 I was able to both capture and deploy images without an issue. Since upgrading to MDT 2013 I've had nothing but grief. When I launch my Sysprep and Capture task I am
returned with the following error:
Error creating an image of drive D:, rc=2ZTI ERROR -Non-zero return code by ZTIBackup, rc=2Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Create WIM.
The system cannot find the file specified. (Error: 00000002; Source: Windows)
The execution of the group (Capture Image) has failed and the execution has been aborted.
An action failed.
Operation aborted (Error: 80004004; Source Windows)
Failed to run the last action Create WIM. Execution of task sequence failed.
The system cannot find the file specified. (Error 00000002; Source: Windows)
Task Sequence Engine Failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error TAsk Sequence Manager failed to execute task sequence. Code 0x80004005
Once the machine boots up again I check the BDD log located in C:\Windows\Temp\DeploymentLogs and notice the following error:
<![LOG[ Console > Error opening file [\\rmh-vm-mdt2012\DeploymentShare$\Captures\WINDOWS.8.1.REF.wim].]LOG]!><time="10:23:55.000+000" date="02-06-2014" component="ZTIBackup" context="" type="1"
thread="" file="ZTIBackup">
<![LOG[ Console > Access is denied. ]LOG]!><time="10:23:55.000+000" date="02-06-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
My issue appears to be a permissions problem. For troubleshooting purposes I've given Everyone full access to \DeploymentShare$ however the problem continues to persist.
I'm not sure where to go from here. Hoping someone can help.
Thanks.

Additionally, ensure that the share itself is marked R/W access.
As a test, boot to WinPE and try to create a file, any file on the share.
However, Lordy86 may have the correct solution :^).
Keith Garner - keithga.wordpress.com

After upgrading to Lion internal mic does not work with Facetime

After upgrading to Lion internal mic does not work with Facetime. The mic is picking up sound as noted in System Prefs. This was working just fine before the updgrade. Facetime works OK on my iPod.

you have in french a tutorial to recreate your partition here
Rebuild partition with Recovery HD lion after upgrade to 10.7.2
i tested, it's work !
For your wifi problem:
Try to change your setup of wifi, look this table given by apple:
I changed my wifi setup wep to wpa and it's work !

After upgrading to Lion Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Office Web Apps 2013 - Word app not working on Sharepoint 2013 but Excel does

Hi there!
We had some problems with Office Web Apps 2013 not working with Lync, and the status of OWA was unhealty so we decided to install some updates for OWA.
We have downloaded November 2013 update for OWA.
We found out a guide for putting updates on OWA and done this steps:
* Remove-OfficeWebAppsMachine
* Installed the november update
* Restarted OWA server
* ran: New-OfficeWebAppsFarm -InternalUrl https://owasrv.domain.local -ExternalURL
https://owasrv.domain.local -CertificateName "certname" -AllowHttp -EditingEnabled
* Restart-Service WACSM
- checked in IIS in the bindings if the site useses the correct certificate
Then we went on Sharepoint 2013 and ran some commands:
* Remove-SPWOPIBinding –All:$true
* New-SPWOPIBinding -ServerName owasrv.domain.local
* Set-SPWOPIZone –zone “external-https”
Now here are the funny things:
* Excel word app on Sharepoint 2013 works
* Word APP not working (screenshot)
* Lync 2013 powerpoint still not working (screenshot)
* status of OWA is healthy
bostjanc

Hi,
The Friendly name field must be unique within the Trusted Root Certificate Authorities store. In -CertificateName, enter the friendly name you gave your
certificate earlier.
Validate the configuration by navigating to the discovery URL of the Office Web Apps server. Like
https://xxx/hosting/discovery
Meanwhile, the issue is related to Lync, I recommend to you to post the question on Lync Server for further discussion via the link below.
http://social.technet.microsoft.com/Forums/en-US/home?forum=ocsclients
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction
with us. Thank you for your understanding.
Tracy Cai
TechNet Community Support

Microsoft Excel 2013 add-in not working after update

I have originally posted this question at answers.microsoft.com and have been re-directed to post here. (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/microsoft-excel-2013-add-in-not-working-after/298aff03-c90a-4a2a-b67b-07b6f3c7648c)
We are an organization with over 200 users and are currently using Microsoft Office 2013 (Click-to-run install via Office 365 portal), we have noticed that in Excel when we apply the monthly Office update, the add-in (e.g. Analysis Toolpak) would stop working
with the following error message displayed.
I tried updating from 15.0.4631.1004 to 15.0.4641.1003,
15.0.4641.1003 to 15.0.4649.1004, they all gave the same results.
I have checked the captioned file path and it is indeed missing, I think the update mechanism messed up the add-in somehow, a full re-install would fix it as quick or online repair is not doing the trick. This is not the only add-in it is affecting
as there are some 3rd party add-ins are affected as well.
Please advise how we can fix this without needing to re-install Microsoft Office. Thank you!

I don't have 365 or C2R so I can't address your main question, so just a few thoughts which may not be applicable in your setup.
Check the addin manager to see if your addins are listed and ticked. If listed (ticked or not) check the registry to see where the location is written, if ticked look here
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Excel\Options
and look for keys named OPENx, where x is the order number the addin is loaded
if not "ticked" instead of \Options look in \Add-in-Manager
With a VBA macro or in the VBE's immediate window return
Application.LibraryPath
Assuming you found a listing in the registry do the paths match, if not look in the .LibraryPath to see if the addins got unloaded there into the subfolder \Analysis
If you find the file(s) try un-installing and reinstalling the addins, but browse to the actual folder don't simply tick. If you can't find the files, copy them (from a different system) to the folder indicated by .LibraryPath. In the addin manager uninstall
them if installed, close the manager, open it again and the addins should be listed, tick to re-install.
You say your other addins don't work, I wonder if some mixup has occurred with what Excel thinks is the default path, but note for other addins the default addins path is returned by app.UserLibraryPath
Are you using a Chinese system?

IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!

Place the device in DFU mode and let iTunes restore the device to factory condition.

After i install Visual-Studio 2013 crystal-report not working

hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:

Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Lync 2013 Desktop SHaring Not working from Internet

Hi,
I am facing one issue, my Desktop Sharing is not working for Internet Clients, error message comes is "we could not connect to the presentation because of network issues" Internally it is working fine even I from Edge Server.
I am using single Public IP Configuration on Edge Server with Port 5061,444,443,3478.
Any suggestions, on I can check are welcome.
Best Regards, Ranjit Singh

Hello Ranjit,
Application Sharing/Desktop Sharing happens through SRTP through the A/V edge Server hence checking the Port Range is very important
Following Port reachability to be checked first
Public --> Edge server:
TCP/443
UDP/3478
TCP/50,000-59,999 (Outbound only)
From the Front End pool to the internal Edge:
TCP/5062
TCP/443
UDP/3478
From the internal Edge to the Front End Pool:
TCP/5065
TCP/49152-65335 (Inbound/Outbound)
More Detailed info can be seen here
http://blogs.technet.com/b/nexthop/archive/2012/11/05/lyncmd-troubleshooting-lync-server-2010-application-sharing-internal-and-remote-scenarios.aspx

HT202157 New apple is not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.

I got new Apple TV 10 days back,its not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.
I can only see pics and video saved in my iphone. No other options are working.The worst part is that its not asking wifi passoword.
Not able to connect istores and itunes.
I cannot do software update. Can anyone help in this content?

Thanks Brian- I am not connecting it with iphone teethering. I am using it with my DSL wifi.
I am using it with ethernet cable then its working fine.If i am trying to use it with WIFI then its giving error.
I tried using Netwrok testing but its giving same error.

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analy

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."

Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
Mylenium

I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

Reinstall the software properly. migration/ backups do not work due to the specific requirements of the activation system.
Mylenium

MDT 2013, D: Wim not applying after update from MDT 2010 to 2013

Updated MDT from MDT 2010 Update 1 to MDT 2012 Update 1, uninstalled WAIK, Installed MDT 2013, and then ADK, Upgraded all Deployment shares along the way, and now the extra drive (D:) Wim will not apply to Drive, i have tried two different ways to handle
the said action, the first was using the Unattend.xml, adding the DataImage Action, the other was using an Imagex command from the MDT task sequence. neither is applying the Wim, before the upgrade this worked. has any one else had this issue?
Thank you,
Dane Zittritsch
Thinix Support Manager

I moved from MDT 2010 to MDT 2013 and its just not working, i have tried a few different methods, the old way we used the
Unattend.xml and placed a install order and that always worked, but now i am trying to use Imagex and its not applying the wim, when i get in the image the D:\ (Second Drive) is missing files. Now here is the weird part, if i re-run the task sequence
the D WIM is applied, but that's counter productive. i will apply my TS.xml information.
Ts.xml
<?xml version="1.0"?>
-<sequence description="A complete task sequence for deploying a client operating system" name="Standard Client Task Sequence" version="3.00"> -<globalVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable>
<variable name="DestinationDisk" property="DestinationDisk">0</variable>
<variable name="DestinationPartition" property="DestinationPartition">2</variable>
<variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable>
<variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
<variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/>
<variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable>
</globalVarList>
-<group description="Initialize the TS environment" name="Initialization" expand="true" continueOnError="false" disable="false">
- <step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly"
property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> </group> -<group description="Test"
name="Validation" expand="true" continueOnError="false" disable="false"> -<condition> -<operator type="or"> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable> <variable
name="Operator">equals</variable> <variable name="Value">VALIDATION</variable> </expression> </operator> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
<variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Check BIOS" continueOnError="false" disable="false"
startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBIOSCheck.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
-<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> </group> -<group description="" name="State Capture" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATECAPTURE</variable> </expression> </condition> -<step description="" name="Next Phase" continueOnError="false"
disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
</group> -<group description="" name="Preinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
<variable name="Operator">equals</variable> <variable name="Value">PREINSTALL</variable> </expression> </condition> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0
3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
</step> -<group description="" name="New Computer only" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DeploymentType</variable>
<variable name="Operator">equals</variable> <variable name="Value">NEWCOMPUTER</variable> </expression> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
<variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Format and Partition Disk" continueOnError="false"
disable="true" successCodeList="0 3010" type="SMS_TaskSequence_PartitionDiskAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="OSDDiskIndex" property="DiskIndex">0</variable> <variable name="DONotCreateExtraPartition"
property="DONotCreateExtraPartition"/> <variable name="OSDPartitions0Type" property="Partitions0Type">Primary</variable> <variable name="OSDPartitions0FileSystem" property="Partitions0FileSystem">NTFS</variable> <variable name="OSDPartitions0Bootable"
property="Partitions0Bootable">True</variable> <variable name="OSDPartitions0QuickFormat" property="Partitions0QuickFormat">True</variable> <variable name="OSDPartitions0VolumeName" property="Partitions0VolumeName">OSDisk</variable>
<variable name="OSDPartitions0Size" property="Partitions0Size">100</variable> <variable name="OSDPartitions0SizeUnits" property="Partitions0SizeUnits">%</variable> <variable name="OSDPartitions0VolumeLetterVariable" property="Partitions0VolumeLetterVariable">OSDisk</variable>
<variable name="OSDPartitions" property="Partitions">1</variable> <variable name="OSDPartitionStyle" property="PartitionStyle">MBR</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDiskpart.wsf"</action>
</step> -<step description="You can change the size of the partition(s) in the \Scripts\WinRE\DiskConfig.txt file. Make sure your partition is large enough to hold the recovery image if you install alot of software. Current configuration is 160GB
for recovery, 60 for OS, 10 for scratch" name="Format and Partition Disk [Custom]" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable
name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010 BETA\Configure-HDD.cmd"</action> </step> -<step
description="" name="Copy scripts" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> </group> -<step description="" name="Configure" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList>
<variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InjectDrivers"
runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DriverSelectionProfile" property="DriverSelectionProfile">Dell OptiPlex 790</variable> <variable name="DriverInjectionMode" property="DriverInjectionMode">ALL</variable>
</defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> </step> -<step description="" name="Apply Patches" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallUpdatesOffline">
<action>cscript.exe "%SCRIPTROOT%\ZTIPatches.wsf"</action> -<defaultVarList> <variable name="PackageSelectionProfile" property="PackageSelectionProfile">All Packages</variable> </defaultVarList> </step> -<step description=""
name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> </group> -<group description="" name="Install" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">INSTALL</variable> </expression> </condition> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description="" name="Install Operating System" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InstallOS" runIn="WinPEandFullOS">
-<defaultVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable> <variable name="DestinationDisk" property="DestinationDisk">0</variable> <variable name="DestinationPartition" property="DestinationPartition">2</variable>
<variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/> <variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable> <variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
<variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf"</action> </step> -<step description="" name="Restart
computer" continueOnError="false" disable="false" successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="SMSRebootMessage" property="Message"/> <variable name="SMSRebootTimeout"
property="MessageTimeout">60</variable> <variable name="SMSRebootTarget" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Next Phase" continueOnError="false"
disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
</group> -<group description="" name="Postinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
<variable name="Operator">equals</variable> <variable name="Value">POSTINSTALL</variable> </expression> </condition> -<step description="" name="Copy Scripts" continueOnError="false" disable="true" startIn="" successCodeList="0
3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
<variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Configure"
continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable
name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> -<step description="Applies the D: wim to System " name="Apply Scratch Drive" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS">
-<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"\\thinix-dev1\navyImage$\Tools\x86\imagex.exe" /apply
"\\thinix-dev1\navyImage$\Operating Systems\navycnic-gen_20131226100000\navycnic-gen_20131226100000_ddrive.wim" 1 D:\</action> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" startIn="" successCodeList="0
3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIdrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
<variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<group description="" name="Custom
Tasks" expand="true" continueOnError="false" disable="false"> -<step description="Makes sure there is no Boot Config files on C drive and changes them to R drive:" name="Recovery Partition" continueOnError="false" disable="false" startIn="" successCodeList="0
3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\Re-assign
DriveLetter.cmd"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false" disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList>
<variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description=""
name="[Custom] TDRBCD" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable
name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\TDRBCD.exe"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> </group> -<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
"%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Set Phase" continueOnError="false" disable="false" successCodeList="0
3010" type="SMS_TaskSequence_SetVariableAction"> -<defaultVarList> <variable name="VariableName" property="VariableName">PHASE</variable> <variable name="VariableValue" property="VariableValue">STATERESTORE</variable> </defaultVarList>
<action>cscript.exe "%SCRIPTROOT%\ZTISetVariable.wsf"</action> </step> </group> -<group description="" name="State Restore" expand="false" continueOnError="false" disable="true"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression">
<variable name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATERESTORE</variable> </expression> </condition> -<step description="" name="Gather local only"
continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/>
</defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> -<step description="" name="Post-Apply Cleanup" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
"%SCRIPTROOT%\LTIApply.wsf" /post</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Recover From Domain " continueOnError="false" disable="false"
successCodeList="0 3010" type="BDD_RecoverDomainJoin" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DomainErrorRecovery" property="DomainErrorRecovery">Auto</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDomainJoin.wsf"
</action> </step> -<step description="" name="Tattoo" continueOnError="true" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTITatoo.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Opt In to CEIP and WER" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIOptIn.wsf"
/CEIP:YES /WER:YES</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Windows Update (Pre-Application Installation)" continueOnError="true"
disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
-<step description="" name="Install Applications" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallApplication"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplications.wsf"</action> -<defaultVarList>
<variable name="ApplicationGUID" property="ApplicationGUID"/> <variable name="ApplicationSuccessCodes" property="ApplicationSuccessCodes">0 3010</variable> </defaultVarList> </step> -<step description="" name="Windows Update
(Post-Application Installation)" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> <group description="" name="Custom Tasks" expand="true" continueOnError="false" disable="false"/> -<step description="" name="Enable BitLocker" continueOnError="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_EnableBitLockerAction">
<action>cscript.exe "%SCRIPTROOT%\ZTIBde.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">BdeInstallSuppress</variable> <variable name="Operator">notEquals</variable>
<variable name="Value">YES</variable> </expression> </condition> -<defaultVarList> <variable name="OSDBitLockerTargetDrive" property="BdeTargetDriveLetter"/> <variable name="OSDBitLockerMode" property="BdeInstall">TPM</variable>
<variable name="OSDBitLockerStartupKeyDrive" property="BdeKeyLocation"/> <variable name="OSDBitLockerCreateRecoveryPassword" property="BdeRecoveryPassword">AD</variable> <variable name="OSDBitLockerWaitForEncryption" property="WaitForEncryption">false</variable>
</defaultVarList> </step> -<step description="" name="Restore User State" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIUserState.wsf" /restore</action> -<defaultVarList>
<variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restore Groups" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
"%SCRIPTROOT%\ZTIGroups.wsf" /restore</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Apply Local GPO Package"
continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplyGPOPack.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
name="Variable">ApplyGPOPack</variable> <variable name="Operator">notEquals</variable> <variable name="Value">NO</variable> </expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> -<group description="" name="Imaging" expand="false" continueOnError="false" disable="false"> <action/> -<group description="" name="Prepare Only" expand="false" continueOnError="false" disable="false">
-<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">PREPARE</variable>
</expression> </condition> -<step description="" name="Copy Sysprep files" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList>
<variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Sysprep Only" expand="false" continueOnError="false" disable="false"> -<condition>
-<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">SYSPREP</variable> </expression>
</condition> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action>
-<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
"%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Capture Image" expand="false" continueOnError="false"
disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">YES</variable>
</expression> </condition> -<step description="" name="Apply Windows PE" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf" /PE /STAGE</action> -<defaultVarList>
<variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn=""
successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
<variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute
Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> -<step description="" name="Apply Windows PE (BCD)" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%_SMSTSMDataPath%\Scripts\LTIApply.wsf" /PE /BCD</action>
-<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">ImageBuild</variable> <variable name="Operator">greaterEqual</variable> <variable name="Value">6</variable>
</expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restart computer" continueOnError="false" disable="false"
successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="Message" property="Message"/> <variable name="MessageTimeout" property="MessageTimeout">60</variable> <variable
name="Target" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"
type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
</step> -<step description="" name="Create WIM" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBackup.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
property="LoadProfile">false</variable> </defaultVarList> </step> </group> </group> </group> </sequence>

Team Foundation Server 2013 MP discoveries not working.

We are standing up a TFS 2013 instance. We copied over our prod data to new hardware and performed the upgrade. The system seems to be working, testing is going on now.
I brought in the Team Foundation Server 2013 Management Pack ver 1.0.0.1 into SCOM and applied the run as account.
First question, in the documentation it shows to apply this to all objects and add in your application tier server(s) into the more secure area to control where the account goes. Doing this caused a slew of "System Center Management Health Service
Credentials Not Found Alert Message" as every other server didn't have rights to run this account.
Changed that to object and selected the AT server. This stopped the alerts and some of the discoveries are working. But when I look in the logs the URLs its trying to hit are missing data, example, MonitorForRegistrationWebService.vbs :
RE-CONSTRUCTED URL = [http://localhost:/tfs//Services/v1.0/Registration.asmx], noticed the // after TFS. Its seem to be missing the project collection name.
I also noticed that the Default Project GUID is coming across as all zeros.
In the monitoring panel the TFS Application Tier Servers view shows my single AT server and all icons show healthy
In the TFS Project Collections, it shows the single project collection I have as healthy but TFSBuildAgent and TFSBuildController are not monitored. These exist on a different server from the AT.
The TFS Installation view shows a single installation as healthy except for TFS Build Server is not monitored
As you would expect by now the TFS Build Agent and TFS Build Controllers view are empty. We don't have a Proxy setup.
I have not disabled any of the discoveries as I wanted to make sure that one or the other would discover the build servers. No override MPs are in place.
Looking at the build controller and build server I don't see any TFS discoveries running in the event viewer.

Hi,
Did you use below management pack to monitor TFS?
http://www.microsoft.com/en-us/download/details.aspx?id=35773
I would like to suggest you check below links:
http://dotnet.dzone.com/articles/monitoring-tfs-2012-using-scom
http://social.technet.microsoft.com/Forums/en-US/24472041-1eb8-44d5-9dcc-6af2bba55c61/tfs-2010-mp-is-not-sending-successful-discovery-information-to-scom-console?forum=operationsmanagermgmtpacks
As when change TFS server, then no errors, so I would like to suggest you compare all TFS related settings. And please also check runas account for the management pack.
Regards, Yan Li

Upgraded to MDT 2013 - old deployments not working - parse error - copyprofile error

Similar Messages

Maybe you are looking for