Upgraded to Mountain Lion and all four voice
over clips are gone in project created yesterday. Have re-recorded them and now they seem to save OK.
Some Firefox and Safari extensions and add ons can cause conflict with font sizes.
In a process of elimination try switching off all extensions, then re-enabling them one by one until you find the culprit.
Similar Messages
-
I just upgraded to mountain lion and all my mail folders for storing all old emails are gone. How do I get them back?
Buffzap,
Make sure that you choose Mail>View>Show Mailbox List, then hover your cursor over one of the subordinate mailbox categories, and you should see "Show." Next click on "Show." -
I have a MBP 13-inch, Mid 2010 and have just upgraded to mountain lion and am trying to connect it to my apple tv however i dont get the air play icon on my mac i have followed all the advise on support anyone able to help??
stevie, a third party app called airparrot will give you the pretty much the same as mirroring and forks on Macs too old to mirror.
-
I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?
I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?
-
I'm currently running 10.6.8 and would like to upgrade to mountain lion but all i keep getting is the following: We could not complete your purchase. OS X Mountain Lion is not compatible with this computer. help
ERA AND MCM wrote:
We could not complete your purchase. OS X Mountain Lion is not compatible with this computer.
it means exactly that, you mac is not compatible to run ML. http://support.apple.com/kb/SP654 -
I am now running on OS X Snow Leopard. If I upgrade to Mountain Lion, will all my files and data and bought programs disappear?
As Austin Kinsella1 says, it's a good idea to check your program versions.
I have found this site really helpful with that:
http://roaringapps.com/apps:table -
As iMac user upgraded to Mountain Lion lost all Legacy connection with years of Apple/Mac data storage. How can recovery since every default says "no longer supported, After years of Mac software use now it is not accessible ??????
Please provide more details. What version OS X were you using?
Are you saying that Mail faIled to upgrade and you lost your old mail?
Are you asking about PowerPC applications that require Rosetta to run like AppleWorks and Microsoft Office 2004? -
I upgraded to Mountain Lion and now I can't use any of my software!
What a disaster and huge mistake. Upgraded to Mountain Lion and now I can't run Autocad 2012 for Mac, any of my Adobe Creative suites software such as Photoshop, Illustrator.. and now I can't even do upgrades because Mountain Lion doesn't allow me to launch DMGs. I've lost thousands of $'s in software, not to mention time, but most importantly now I can't even work! I just tried to revert back to Snow Leopard by intalling it back in my hard drive and it won't let me. I never used Time Machine. Is there any way on earth I can revert back to my old operating software??? Please help. And if you haven't upgraded yet and are thinking about it. BEWARE - and don't do it. I've been reading that Mountain Lion isn't working with Microsoft applications either. Omy...I haven't even checked that.
and of course no one at Apple support can or will help melunaulu wrote:
It's not my Microsoft that I use much or am worried about. I can't run AutoCAD. and I can't update AutoCAD either. When I try to mount an update just to get it working, it says it can't run the DMG file. Apparantly this new platform doesn't use Rosetta - which is needed to run any of these updates or downloads. ***? and then When I try to open CS4 appliations - Adobe Photoshop, Illustrator, or InDesign - I get the message "Licensing for this product has stopped working - Error 150:30 - ***?
So basically I can't use ANY of the programs I ran before. And yes I have googled desperately all day. Adobe has some suggestions - like deleting a Flex files - which I did...Defragmenting - which I did. And most importantly provides am Adobe Licensing Repair tool to fix - which I can't open because Mountain Lion won't mount the DMG in order to run it! It's a complete disaster and I don't have the money or time to purchase and or reinstall everything. I am just screwed.
No you are not, calm down, cbs20 already gave you the answer on opening dmg files, updates are available for most of your programs and I assume you have licenses for the Adobe products. AutoCad you'll have to wait for.
And please .... Start Backing Things Up, you could lose it all without one, work included. -
Just upgraded to mountain lion and my HP Laserjet p1102W won't connect
Just upgraded to mountain lion and my HP Laserjet p1102W to print (worked fine via USB with Snow Leopard; I never had set it up wirelessly, though had wanted to do so.) HP site said if printer worked with Snow Leopard nothing would need to be done; update of drivers would be automatic within Mountain Lion upgrade. No such luck. My Macbook Pro and HP Printer are not talking to each other. HELP, please!
I have a Macbook pro.
When I tried to print, I was told to get new drivers from HP. HP site says what I wrote above, that I need do nothing if printer worked with Snow Leapord. Also read that a new HP Laserjet would need to be connected only via Airprint. So, I have deleted the printer from the print queue, thinking that might help, but I can't find how to install it via Airprint?? After deleting the printer and having no luck with connecting wirelessly, I tried plugging in USB from printer to MacBook pro, too, thinking maybe that would help, but there is no recognition at all.
What am I missing???
Thanks!
AniCsound1 wrote:
John Blanchard1 wrote:
Are you not able to select AirPrint from the menu that lets you select the PPD?
Do you have the latest firmware?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4110396#N222
Airprint is for IOS devices and thus has no relevance to this issue.
Connect the printer to your Wireless Network and use Bonjour to detect nd connect it.
That's wrong. AirPrint is not just for iOS devices. Since HP doesn't provide drivers for this printer, they say to use AirPrint:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03425022&cc=us&dlc=en&lc=en &os=219&product=4110396&sw_lang= -
selling macbook Pro 2011. It came with Lion, I upgraded to mountain Lion and Mavericks. Can license be transfer to new owner? how?
Good question now that Mavericks is free to all.
It used to be - and is probably still the case - that to comply with the license you should erase and re-install the OS that came pre-installed on the Mac when new. If there were restore disks they needed to be passed on with the Mac.
I'm happy to be corrected on this by someone who's more au fait with the legalese, but an upgraded OS is tied to an AppleID whereas the original OS is tied to the computer, not an AppleID.
My guess is, that if you launched the Recovery HD, erased the drive using Disk Utility and re-installed the OS, Lion would be installed.
Be interesting to see what others say. -
I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.
I had this and fixed it.
I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
After lots of hunting, I found the Signature Folder. It's in:
Yourusername>Library>Mail>V2>MailData>Signatures
Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
Since this was literally a clone of my previous setup to a new machine, here's what I did:
1. Quit Mail
2. In Problem machine, go to
Yourusername>Library>Mail>V2>MailData>Signatures
3. Move the Signatures folder someplace safe, but out of the MailData folder
4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
5. Start Mail on the problem machine
This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
Hope this helps -
I've upgraded to Mountain Lion and now see "Blocked plug in" when on my banking site and also when on Facebook. I've been told Adobe Flash is not a good option, any suggestions?
cin2 wrote:
I've been told Adobe Flash is not a good option, any suggestions?
Told by whom? Works here with all my sites. -
Why, when MobileMe was shuttered, does Apple NOT support calendar subscriptions for iCal (Calendar)?
I upgraded to Mountain Lion and cannot migrate my Dutch, U.K., Islamic, or Catholic holiday subscriptions. I had a heck of a time getting my Detroit Tigers Baseball team schedules migrated (but Major League Baseball supported the subscriptions, so it occurred). As I work internationally, having these calendar subscriptions on the new Calendar would be very useful.
If one goes to the Apple site, and seeks calendars [http://www.apple.com/downloads/macosx/calendars/index1.html], they are shunted to MobileMe [https://www.icloud.com/mobileme/not_found/], with the note "MobileMe is closed. Go to iCloud." But, I do not see how to get subscriptions from iCloud.
Thanks.The problem is that many of these calendars were hosted on MobileMe. I actually tried about 20 at random, and only two worked! Not all of the failures were ex-MobileMe, some were on other servers but produced 'File Not Found'.
Strangely, this one worked despite its URL:
http://ical.mac.com/ical/UK32Holidays.ics
Until the people who publish these calendars (it's not Apple, they are third-party) wake up and find alternative servers these calendars are not available.
There may be other sources which work - try Googling. -
I just upgraded to Mountain Lion and when I turned around I noticed my Stickies were gone
I just upgraded to Mountain Lion and when I turned around I noticed my Stickies with all my secret computer codes and passwords etc. were gone. I think they are attached to the application and were replaced with the upgrade with a new version...n'es pas?
Came here looking for a solution to this same problem and presume others will.
I found it somewhere else but just want to share the answer!
go to the SPOTLIGHT search and type in Stickies.
The app is still on your mac, it just doesn't show in the dock or the Launchpad.
It opened and all my lovely notes appeared as they were in my Lion install.
have a nice day!
EMJ -
I've upgraded to mountain lion and cannot receive email
Can anyone help?
I've upgraded to mountain lion and now cannot receive email in any account although I can send emails
ThanksI have exactly the same problem but with a worringly more complex situation. I too can see TC in finder. I can see the backup disk for my iMac in TM. I can also see the backup disk for my MBP in TM (this sits on a HD that is daisy chained to my 1TB TC).
Here's the worring bit. My MBP was upgraded to Moutain Lion but my iMac is still on Lion. Both have the same issue in that all disks can be seen as normal but not connect to make backups.
I receive the notificaiton that includes: "cannot connect...xxxtimecapsule.local. Verify server name or IP address. "
I have made a backup since the Mountain Lion upgrade with no issues then suddenly it cannot connect to repsective backup disks on either machine. I was attempting a restore of my MBP from my backup so I could have a cleaner disk to create a new partition for windows. When I choose the backup disk to restore from (in recovery mode) was when it failed to connect and its been downhill from there.
Router works fine and I am still connected to my dsl modem,
I have reset TC and all machines. I am now at a complete loss!
Maybe you are looking for
-
Linking two fields in a dictionary view to the same field
My DBA asked me if I knew how to do this without resorting to ABAP code, and I said I'd ask you guys over here. A customer wants a view on several tables. Vendor name from LFA1 is one of the columns in the view. He has two other columns in the view
-
Can't export or share in Final Cut Pro X
Hi. Brand new to FCPX, this is my first project. I imported a project from iMovie, finished editing it in FCPX, and wanted to export/share it. The menu is completely grayed-out, and the keyboard command (Command-E) does nothing. What am I missing?
-
Strange module problem, modules not found
Hi! Not sure if thois is the correct area but anyway... I have a really strange problem loading modules: Sometimes when booting it can't find my modules, in most cases (but not all) I have done a unclean shutdown so fsck needs to run (but it have hap
-
Open CL for Adobe Premiere Pro CS 5.5
How can i use AMD Radeon R9 M290X with 4 GB inside an iMac 5K with Premiere Pro CS 5.5 to use the GPU supporting of Mercury Playback Engine. Is there a patch or update for CS 5.5 available which support this. I want to stay with CS 5.5 now, i am happ
-
My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?