Upgraded to new MacBook and now Office activation is declined because of too many users. How do I delete Office registration for my old computer?
Help please. I upgraded to a new macbook and migrated everything. However, Office will not activate because it says too many copies are active. How do I delete the activiation for my old laptop? Thanks.
Use the Office activation phone number and call the automated activation menu. It will ask you how many installations you have. It will then issue you a new code for your new installation. Make sure your old installation is removed.
Similar Messages
-
I setup messages on my new macbook and now when I have an imessage conversation from my phone it says my email address. How do I change this?
Messages Preferences, select iMessage account, Start new conversations from:
Same on iPhone, but in the Settings under Messages. -
So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.
A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert -
I recently bought a new macbook and went to download the upgrade to mountain lion. It showed it was downloading and then showed installing 2 items. Today I checked in "about my macbook" and apparently i still have just lion, not mountain lion. What happened?
Mountain Lion is not an automatic install as part of the App Store download. It puts the "Install OS X Mountain Lion" installer in /Applications, then automatically launches a dialog expecting you to click "Continue." Once you click continue, it will go through the upgrade process, installing ML, and then delete the previously mentioned installer from /Applications.
If the ML download was successful, the installer should still be found in /Applications. -
I added a folder accidentally to my iTunes library and now all of the songs are in there twice. I tried to stop the import but it transferred too quickly. How do I delete all those songs without having to click on each one to delete?
Apple's official advice on duplicates is here... HT2905: How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning
to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
tt2 -
Upgraded to new MBP and now I can't bounce?
I recently upgraded my MPB and now for some reason, when I bounce, the file is empty/silent. I am using all the same gear and the same templates I used on my old computer. Nothing has changed except the computer. I went line by line through every setting with the old computer and everything is the same.
Any insights? I tried bouncing in every format both offline and online. Same results. I also opened the file on my old computer and it bounced just fine.
Help?Have you tried trashing logic prefs? Or perhaps copy the prefs from your old computer to your MBP, and substitute the current prefs there.
Have you looked in System Preferences... and checked the sound settings?
As a last resort, you can try zapping the PRAM, although that resets every system setting to defaults. Before starting up, press shift-option-p-r (a 'chord') and lift after the second chime. -
my daughter has a brand new ipod touch - latest one - she started to input a passcode then didn't finish the process then turned off ipod. she turned it back on and it is asking for a passcode - she doesn't remember what she typed. Ipod is now disabled for one hour. Can we override the disable. How do we reset passcode when we don't klnow the original. It has never been synced to Itunes. I am completely lost.
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New. -
I downloaded my previously purchased songs to my new macbook, but only parts of each song are available. How do I fix this problem?
Delete the Song(s) and re-download...
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519
If no joy... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us -
How can I delete my icloud and all my stuff off another phone that I don't have access to?
actually you can change password on that account by resetting password at that site
iforgot.apple.com. After that he will not have access to your data anymore.
you also can wipe his phone, but I don't know if you want him coming after you for that.
If email that you use for apple id is accesible by him you can also change your apple id at the site
appleid.apple.com - just login and edit apple id to new email that he would not know.
Once again, you can do bad stuff to him, but usually it is better to leave that to the police. -
How do I delete an app of ibooks that is in my settings only and cannot be accessed?
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.
-
Tried to upgrade to new itunes and now can't load itunes or quicktime
HELP! i tried to upgrade my itunes. This upgrade was totally successful. I then had another problem on my computer so i tried to restore my computer to an earlier timepoint. Since I have done this, I can't load itunes or quicktime. I have tried to uninstall the programs and reinstall them but it still doesn't work. I get an error message on quicktime:
failed to initialize- error-2095
The itunes error message reads :
iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.
Help- I am going insane with this!!!I followed a link and somehow ended up at this post from Mike Hogan3 and combined it with something else I came across. This is what worked for me!
1)Follow his suggestions for removing quicktime and itunes (at the end of this message).
2)Then reinstall iTunes from:
http://www.apple.com/itunes/download/
3) Then install QuickTime Standalone Installer from this page (located in the middle right of the page- don't install the one with iTunes!) http://www.apple.com/quicktime/download/win.html
Hope this works! It did for me!
Posts: 15
Registered: Sep 26, 2005
RE: QuickTime Installation FAILED!! "Error Code: -1"
Posted: Nov 6, 2005 8:51 AM in response to: Adrian Koo Reply Email
This might not be exactly the same problem but lots of people (myself included) had problems after installing iTunes 6.0. I did the following and it finally installed correctly.
I went to
http://support.microsoft.com/default.aspx?scid=kb;en-us;290301
and downloaded the Cleanup utility near the bottom of that page. When it installs on your machine it will scan your computer for every installer every ran on you're machine. Only select iTunes and Qtime and delete those 2 installers. Then I went to add/remove programs and removed iTunes and Qtime. Prior to this Qtime would not unistall but now it did. Funny thing was there was no prompting by windows once I hit "remove/repair" in the "add/remove programs" function.
Then rerun the iTunes 6.0.1 update. That had been failing to install Qtime prior to this but now it installed and I see all my music again and iTunes works. Let me know if this does the trick, I hope so. -
Upgraded to new iTunes and now it does not work
I recently upgraded to iTunes 10.1.2 and it does not work.
The current message I have is:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken="1fc8b 39a1e18e3b",processorArchitecture="x86". Please refer to Help and Support for more information. HRESULT: 0x80070002.
I have tried to uninstall and reinstall iTunes but it does not work.
Thanks,
DavidWhy not? What happens when trying to use it?
"Will not work" is useless when asking for help. Without specifics, no assistance can be provided. -
I bought what I think to be the new iPad but chose to go with the non cellular option. Now I'm not sure if they have given me the new iPad or the iPad 2. I got a black 64gb one and need an easy way to determine the differences. I haven't put iOS 6 on it.
Look at the Model number in the very small text on the back and compare it to this:
http://www.everymac.com/systems/apple/ipad/index-ipad-specs.html -
can i get some help how to resolve this issue
Hi Davgui,
If you are having issues with a miscreated Apple ID, you may find the following articles helpful:
Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht1311
Regards,
- Brenden -
I have updtated my iPone 4 to ios7, and it then crashed. How do i get my purshased music from my phone to my computer?
Hi sigrun from mo,
If you are having a button issue on your iPhone that prevents you from doing further troubleshooting, you may need to have the phone serviced. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden
Maybe you are looking for
-
I have a few aps on my phonw that won't load onto my phone. I have the 3G. But they show up in my itunes account. Some are double in my itunes, one saying loading or waiting, the others are fine, just not on my phone. I can't delete them. When I
-
How can I uninstall Acrobat 7.1.0 professional
I can not uninstall Acrobat, it always pop a window "internal error 2753 .uninstmanager.dll " ,But i can not reinstall it also. Can anybody tell me how to uninstall acrobat completely? Thanks!
-
IMAP sent emails & drafts not syncing - MS Outlook 2007
Hello, I am having issues syncing the sent items from desktop outlook 2007 to my passport. I have been trying this figure this out for the past 3 days and hoping someone here can be of some assiastance. I have done the following:- checked the outlook
-
Self destruct PDFs -- PDFs with an expiration date
Hi, There's quite a lot of Google search results for "self destruct PDFs" but I haven't found a solution. Is there third party software for giving a PDF an expiration date so that it can't be opened after a certain date? Thanks, David
-
Why i cann't delete the jdeveloper directory in my computer?
the jdeveloper is located our D:,and D: is ntfs ,when i delete the jdeveloper directory,it ocured a error( access denied)??? why?