Upgraded to OS X Lion and now Pages has no "save as" option

I upgraded to OS X Lion, and my Pages has mysteriously removed the Save or Save As options.  It gives me "Save a Version" but doesn't allow me to edit the document name or decide where to save it.
Help!
j

Which operating system are you running ?
Here are four screenshots which I took under 10.7.0.
CAUTION, in French, Save… is spelled Enregistrer…
This one was taken just after creating a new document from an in-the-box template.
The Save… item is available.
This second one was taken after:
changing a word just below the date then duplicating the document.
As the duplicatewas never saved, the Save… item is available.
Thirs third one was taken just after replacing the string "titre" par "un titre" in the duplicate.
As this one was never saved before, the Save… item is available.
This 4th one was taken after saving once the duplicate then inserting "nouveau" between "un" and "titre".
As the doc was already saved once, the available menu item is no longer "Save As…" but "Save a Version".
I hope that this time you saw the Save… (Enregistrer…) item.
Yvan KOENIG (VALLAURIS, France) mardi 2 août 2011 22:28:35
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Similar Messages

  • I just upgraded to OS X Lion and now I can't open the application Adobe ImageReady CS because PowerPC applications are no longer supported. Is there anything I can do to fix this?

    I just upgraded to OS X Lion and now I can't open the application Adobe ImageReady CS because PowerPC applications are no longer supported. Is there anything I can do to fix this?

    There is no fix. It simply means that the software is outdated. Adobe would need to release a newer non-PPC version that supports Lion. They may have done that already, I don't know.

  • I just upgraded to OS X Lion and now MS Word crashes. Help needed!

    I just upgraded to OS X Lion and now MS Word crashes.No problem with Powerpoint or Excel. Any assistance greatly appreciated
    The error is:
    Microsoft Error Reporting log version: 2.0
    Error Signature:
    Exception: EXC_BAD_ACCESS
    Date/Time: 2012-06-12 10:37:05 +0000
    Application Name: Microsoft Word
    Application Bundle ID: com.microsoft.Word
    Application Signature: MSWD
    Application Version: 12.3.3.120411
    Crashed Module Name: CoreFoundation
    Crashed Module Version: 635.21
    Crashed Module Offset: 0x00008fc1
    Blame Module Name: MicrosoftComponentPlugin
    Blame Module Version: 12.3.3.120411
    Blame Module Offset: 0x000ed299
    Application LCID: 1033
    Extra app info: Reg=en Loc=0x0409
    Crashed thread: 0

    As I said, there have been reports on there of problems for some people using 2008, as you have experienced with particular components of the suite.
    Best solution would be an upgrade to 2011...I have had no issues at all using 2011 with Mac OS X 10.7.4.

  • I did have the ability to "save" in PAGES. I upgraded to "Mountain Lion", and now I can not "Save". Help please!

    I used to be able to "Save" my material in PAGES. I upgraded to "Mountain Lion" and now when I go to "Save", it says "permission denied". How can I correct this?
    <E-mail Edited by Host>

    Several users have had this problem in Mountain Lion. The system has decided you don't have read/write permissions. Have you done any updates to your system lately? Using Disk Utility to repair permissions after any upgrade or update, especially to the system, is a good practice. So first, I would repair permissions & then if you still have the problem, locate the file in Finder & go to File > Get Info & look in the Sharing & Permissions section. You should be the only one with read/write permissions but something has happened. Click on the words under "priveledge" next to your name & change it to read & write. You will probably have to enter your admin password.

  • I upgraded my iMac to Lion and now it won't keep a wireless connection. Any suggestions on what I can try?

    Upgraded my 27" iMac (4 GB memore/3.2 GHz Intel Core i3) to Lion 10.7 and now it won't keep a connection to my wireless. I've had to shift over to working on my MacBook Pro which is also upgraded to Lion but showing no problems whatsoever.
    I bought the iMac this summer, refurbished from Apple. I've also never been able to get it to play video ... might or might not be related to the problem here. (yes, I've updated the silverlight)
    Any suggestions on what it might be or what I can try?

    Have you used Software Update to update to 10.7.1. That update was suppose to fix some WiFi Issues.  http://support.apple.com/kb/HT4764

  • My business partner created our website on her personal computer, then downloaded it on a USB drive. I pluggeed in my drive, after I upgraded my MAC to Lion,and now only see the initial start up in 2009. HELP!

    I upgraded my computer to Lion recently and have been having major problems, Most importantly with managing my website on iweb.
    my website is managed from a USB Drive, since the original creation was made on an ex-partners computer.
    When I plugged the drive in today, the original set up of the website from 2009 comes up.

    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • HT5225 I just upgraded to OS X Lion, and now I can't open my Quicken!!!

    I just upgraded to OS X Lion 10.7.3 and now it's telling me I can't open the application Quicken anymore, because PowerPC aplications are no longer supported!  I sincerely hope someone knows how to resolve this.  I'm in big trouble!  I get the same message when I try to open Excel, Word, and a game called Mah Jong.  Thank you!

    The Quicken issue has been a hot topic in the Quicken forum as well as many others.  Intuit did not provided an updated Quicken when Lion came out.  I believe that within the past month Intuit has announced a version that does work in Lion, I looked into it, but was not impressed; there were some technical issues that prevent me from using it (don't recall the details though).  Fortunately, I found out about the Quicken mess when Lion came out, and like many users, migrated the quicken data files over to a common format that could be imported into a number of new financial apps like iBank.  Intuit lost a lot of Mac users over this.
    As for Excel and Word, you have to buy Microsoft's newest version of Office on Mac to be compatible.

  • Upgraded to OS X Lion and now adobe illustrator doesn't work?

    I just upgraded my desktop and now none of my adobe creative suite software work?

    Known Issues | Adobe products on Mac OS 10.7 Lion :
    http://kb2.adobe.com/cps/905/cpsid_90508.html

  • Upgraded MacBookPro6,2 to Lion and now computer freezes before login

    Hi everyone,
    As the subjed line says, I upgraded to Lion and everything smoothly (aparently), but after I tried to install Xcode for Lion the pc started getting slower and slower. The 10.7 Core libraries never installed (kept failing) and now the computer freezes before I can login. I tried to reinstall Lion (Pressing ⌘+R after hard powerdown) and following the prompts, but that failed. No reasons why, it just said user cancelled.
    Before I wipe out my hard drive, is there something else I can do? Any help is appreciated.
    Thanks

    I am typing this reply from my MacBook Pro after recovering from the problem above. This post is for anyone else who might have the same problem. These are the steps to follow to be able to log back in:
    Power down the computer and then press ⌘+R while powering up. This is called Lion Recovery, according to this knowledge base article: http://support.apple.com/kb/HT4718
    In the options presented, select Disk Utility and verify the hard drive (HD) and repair the permissions on it. If your HD is not OK after verifying it, you will need to repair the HD as well.
    Once the step above is complete, restart the computer.
    Log in as normal.
    Once you log in, it is important to find and solve whatever is causing the freeze.
    In my case, it was a botched Xcode installation. If you do not fix the problem, the computer will freeze again next time you restart it, so make sure you check everything and uninstall anything that you may have installed recently. Some Adobe applications have known issues as of this posting (July 2011), so definitely remove anything new from Adobe you may have installed after upgrading to Lion or in the last couple of weeks.
    Final note: If you cannot find the problem and your computer freezes again the next time you restart, you can regain access to it by following the steps above. Follow them, log in and make a backup of your important stuff and either go back to Leopard or contact Apple support for further instructions.
    Good luck!

  • I upgraded to 3.6.8 and now pages won't load, connection times out.

    I open Firefox on my desktop. Takes forever to load my google home page, or sometimes it says connection timed out. When I try to get to websites it either takes forever, or I get a message saying connection timed out, and/or the error message problem loading page. Has only started happening since I upgraded to 3.6.8. Have tried disabling add-ons but that didn't help. Nothing wrong with my internet connection. Use Windows XP

    Do you use McAfee Antivirus/Firewall/Security products? McAfee released a security update that is blocking Firefox 3.6.11. This should be cleared up with the next McAfee update.

  • I recently upgraded my OS to Lion and now my iPhoto,iDvd,iMovie apps are gone. My computer had these preinstalled when I bought it. Is there a way to get these back without paying for them again? (I dont have any disc to reinstall them.)

    Any help would be appreciated, this is pretty frustrating I really don't want to cough up $80 to get back what was included in the original purchase price of my computer.

    If you only want iPhoto or other single apps from iLife '11 you can get them from the App Store. iPhoto, iMovie or Garage Band for $15 each and Pages, Keynote or Numbers from iWork '09 for $20 each. iDVD has been discontinued by Apple so you would need a DVD of iLife '11 for $49 http://store.apple.com/us/product/MC623Z/A/iLife-11?mco=MTY3ODQ5OTY or an install disk 2 to get it.

  • Help-upgraded mac mini to lion and now getting spinning ball

    I just downloaded and install Lion on a mac mini and I'm getting the old spinning beach ball from ****. Any suggestions? Can I just turn it off and restart?

    Hold down the power button down until the screen goes black. Do not disconnect the power cord from the electrical outlet to turn your Mini off.
    Wait a minute then try restarting.

  • I upgraded to OSX mountain lion and now the scroll bars on every screen are not there unless I stretch the screen - help

    can anyone tell me why I can no longer see the scroll bar to the right of the screen unless I stretch the screen but it fades in and out instead of always being there to scroll down

    Open General preferences. Select the desired scrollbar behavior/appearance:

  • I've upgraded to mountain lion and now cannot use microsoft office--what happened?

    I've upgraded to ox Mountain Lion and now cannot use any of my Microsoft office software.  What happened?

    It appears that you upgraded your computer to Mountain Lion and were using Microsoft Office 2004.  In the short term, if you need to open and modify Word files, go to the file in the Finder and Control-Click on it.  A menu will come up: go to Open With... and select TextEdit.  This should allow you to open, modify and save the file for the short term.
    You can do the same trick to open Microsoft Excel files in Preview and print them; but I do not think you can modify them in this way.
    Workarounds for Microsoft Office 2004 since upgrading to Mountain Lion:
    1.  Upgrade to Microsoft Office 2011.  This version works in Mountain Lion.  However some of your legacy 2004 files may convert badly.
    2.  Restore the version of OS X that you were using before Mountain Lion.
    3.  Partition your hard drive and/or attach an external hard drive and install Snow Leopard on it and use the 'dual-boot' method of booting into Mountain Lion when you need it and booting into Snow Leopard when you need to run your PowerPC applications such as Microsoft Office 2004.
    4.  The method I use, which allows me to run my PowerPC applications concurrently with Lion:  I installed Snow Leopard (with Rosetta) into Parallels 7 in Lion:
                             [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439

  • I updated my iMac to lion and now when i leave my desktop and it goes into stand by it like a picture is taken of the screen and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopar

    i upgraded my iMac to lion and now when i leave my desktop and it goes into stand by mode, its like a picture is taken of the actice desktop and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopard. does anyone else experience this and is there a fix?

    I have an iMac 8, 1 that I upgraded Leopard to Snow Leopard.  It was totally updated with the latest from Apple when I bought and tried installing Lion.  The upgrade failed, shot my OS and I couldn't boot.  Had the constant spinner on a grey screen..  did a format of the drive, hdd repair and everything came back clean... got back to Snow Leopard and all the updates on it again and then retried the Lion thing... same bs... dead duck.  Crashed my system one too many times.  I can't see where a few small changes, mostly app related can be classified as an OS upgrade and is not compatible with my iMac.  I have the stuff running on my Mac Pro but have yet to notice anything impressive.  I've always used F3 and really didn't require Mission Control.  Just open you app folder for launch pad... duh?  I use the hot corners anyhow.  As far as Safari is concerned... as a power user, Apple missed the boat on that for me.. full screen etc.. Wow.  I don't like the new Mail either..
    As you can see/read, I'm less than impressed with this release from Apple but I own so many of their products that I will have to put up with it for now... somehow the MS logo should apply to this release Steve.

Maybe you are looking for

  • Pricing problem-Urgent

    Hi all, iam getting a problem regarding pricing. When i make a Sales doc. with reference to an invoice, everything is being copied from invoice to the sales doc.-customer, material  and its no. , sales area, payment terms, incoterms, and material qty

  • How to see the foreground and background colour without those sliders?

    I've always found the Color Panel really annoying. A lot of space is taken up by those sliders, and I hardly ever use them. Is there some way to hide the sliders, or-better still-put the foreground & background colours on the control panel? Shouldn't

  • Apex long time waiting! APEX + COCOON = PDF Carl's blog

    Hello! Help me, please! I need to print reports in PDF. What I did: 1 I installed Apache Tomcat 6.0.14 2 I installed Cocoon 2.1.10 All works fine! http://localhost:8080/Cocoon opened OK 3 I copied fop_post to \apache-tomcat-6.0.14\webapps\cocoon\ , n

  • Error on JDBC Receiver Channel

    Hi, I configured a Receiver JDBC Channel to read data from XI own DB. We are using MS SQL Server 2005. During the test, I'm running to the following issue. Any ideas on what could be causing this error: Log for CC monitor: 2010-07-20 13:53:20 Success

  • Duplicates files and DVD failed

    Hi all. I'm new to FCPX and Compressor 4.1.3. Both FCPX and compressor creates many video duplicates and the iMac is running out of memory. Some of the video file sizes duplicated and increased up to 138GB. I bought WD My passport 2T external hard dr