Upgraded to osi 10.9 maverick on macbook pro
i upgraded to osi 10.9 maverick,on new macbook pro,now can't get my audiobox vsl 22 / usb to work, sounds all distorted and very bad latency
i need help,or any suggestions on what interface will work with this setup on garageband,thanks
Hi mckual-
What happens when you try to search using the Google search box on the page? Does the cursor not go in the box? Are you able to search using the Google search box on the toolbar? Any of this information would be helpful.
Similar Messages
-
Just upgraded to OSX 10.9 mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
How do I find in the "Mac App Store" the authorize --my computer to do an upgrade on the newest imovie in Maverick? MacBook Pro 15' 10.9.2. Thank you!
He shouldn't have done that. Now you have a pirated version of iMovie on your Mac that you will never be able to update. The MAS Terms of Use do not allow that type of sharing. His Apple ID is encoded in the copy on your Mac and you can't change that.
Legally you should delete the app.
Your Mac should have come with the iLife apps pre-installed, why did he do that? -
After upgraded to Mavericks my macBook Pro my Apple TV sound crash each ten seconds. Please help me!
After upgraded to Mavericks my macBook Pro my Apple TV sound crash each ten seconds. Please help me!
Hi Aparana.rahul,
The beeps during the startup of your MacBook Pro indicate that it may need to be serviced. See this article for further information -
OS X Mavericks: If you hear beeps when your computer starts up
http://support.apple.com/kb/PH14206
Note that while the article title says it is for computers running Mac OS X 10.9 Mavericks, the same information applies to other versions.
Thanks for using Apple Support Communities.
Best,
Brett L -
Since upgrading to Maverick my macbook pro randomly shuts down all the time, no idea why...
Since I upgraded to Maverick, my Macbook Pro shuts down quite often without warning. No idea why.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo). -
Safari version 7.0.6 (9537.78.2) won't play html5 videos. (Mavericks on Macbook Pro)
Since upgrading to Safari version 7.0.6 (9537.78.2), html5 videos will no longer play. (Mavericks on Macbook Pro) I get the error message "Please upgrade your browser to view HTML5 content". The only extension I have is ClickToFlash. When I disable it, I get the error message immediately without having to click on the "Flash" button to give it permission to run.
same thing for me... yesterday i started noticing flakey graphics on video playing, then went shopping on Amazon which kept telling me to upgrade my browser, and when I check the link to safari update, I am greeted with I have the latest version of safari. I checked my Last Yosemite update... it is current. I rebooted my computer went to bed, and today, nothing on Yahoo, Abc News, youtube will play when it comes to video. A conspiracy in the making to take down or disrupt all apple users I am sure must be going on. I say this because I checked another iMac which has been working flawlessly. And update to flash came in, I did not perform that update. Videos worked fine. That update was done and bam... no video playing on that computer either.
I think Apple should release something immediately and stop anymore flash on mac updates to be installed. Adobe needs to be notified that what ever they have released is killing all apple users who use safari.
ANYONE READING THIS BE AWARE THAT THE LATEST FLASH UPDATE PROMPT WILL KILL YOUR MAC SAFARI AND VIDEO PLAYING ON SAFARI WILL END. AMAZON and OTHER SITES WILL TELL YOU YOUR BROWSER IS OUT OF DATE, IGNORE THAT BECAUSE I THINK WHO OR WHAT EVER COMPANY IS BEHIND THIS HAS BEEN WORKING INSIDE WITH THOSE COMPANIES ALTERING CODE SO THAT PEOPLE ARE DRIVEN TO START UPDATING SOFTWARE IN HOPES OF SNAGGING THE UPDATE FROM ADOBE THAT CAUSES THINGS TO CEASE WORKING.
TODAY Both IMACS Running YoSemite will not play video and are both crashing with Graphic Hardware errors... 2 iMacs that are 2 years apart on Manufacture date, and both were working flawlessly this past weekend. -
I have an Epson scanner that is apparently no longer supported because it is a PowerPC app. It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro. Any suggestions on how I can continue to use it?
For that model, Epson has this information:
ICA Scanner Driver
07/17/12
Description: The latest Mac OS X ICA scanner driver for your Epson product is available only via Apple's Software Update. Here's how to get it:
1. Connect the all-in-one or scanner to your Mac and power it on.
2. Select the menu, then Software Update.
3. Follow the on-screen instructions to install the available updates.
Note: Software Updates may find multiple updates for your system. You may choose to install all or some of the updates by clicking on Show Details.
Compatible Systems: Mac OS X (v10.8.x) -
I have installed OS X Mavericks on macbook pro, macbook air & iMac but I am having terrible trouble with apple Mail. I need to take all accounts online frequently OR worse I have to quit mail and restart computer. Is anyone else having problems?
I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone??? -
Installed Mavericks on MacBook Pro. Now my Contacts has no records. Contacts on my iPad are OK. How can I repopulate my MacBook Contents file from my iPad?.
rbargeThis is all just a partial answer since details will depend upon how you want to do it.
Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Commercial software utility for transferring songs from i-device to Mac - http://www.fadingred.com/senuti/
http://support.apple.com/kb/HT1848 - just media purchased from iTunes Store
You'll need to get it all onto one iTunes collection on your Mac Pro, then sync the devices to that. iTunes only lets you transfer purchases from a device, otherwise you have to use third party software.
I guess you could also look into getting iTunes Match. -
Re: How do I upgrade or transfer existing Windows CS6 to MacBook Pro laptop?
Re: How do I upgrade or transfer existing Windows CS6 to MacBook Pro laptop
You have to contact Adobe. Since it is a current version you can get a Mac disk but have to shred the Windows disk. Other option subscribe to CC and you can use either OS.
-
upgraded to lion on my 2009 summer macbook pro, now no memory left. something is screwy ...please help an old lady out..
By memory, do you mean space on your hard disk?
If so, here is one resource:
Freeing space on your Mac OS X startup disk
Or do you really mean memory - i.e,, RAM?
In any case, what occurs that makes you think your "memory" is gone?
charlie -
Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?
thanksYes. You should be fine with Snow Leopard, but Lion requires a minimum of 2 GBs of RAM. If you upgrade to Lion I would first upgrade your RAM to at least 4 GBs if your model supports it. Also, see:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s). -
How can I upgrade Boot camp 3.0.4 on macbook pro (os x v10.6.8)?
How can I upgrade Boot camp 3.0.4 on macbook pro (os x v10.6.8)?
Apple Software Update in Windows or manually.
Recent updates:
Boot Camp Software Update 3.3 for Windows
Boot Camp Software Update 3.2 for Windows 64 bit
Boot Camp 3.2 Update for iMac (early 2011)
Boot Camp 3.2 Update for MacBook Pro (early 2011)
Boot Camp Software Update 3.2 for Windows 64 bit
Boot Camp 3.0, Mac OS X 10.6 FAQ
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions
http://www.apple.com/support/bootcamp/ -
After installing Mavericks my MacBook Pro and my MacMini can't shut down, only a grey screen and finish. Must be killed by the power button. Why?
Nach der Installation von Mavericks kann ich weder das MacBook Pro (2 x 2.4 GHz) noch den MacMini (2 x 2.66 GHz) herunterfahren. Es bleibt ein dauerhafter grauer Bildschirm. Nach 20 min habe ich einen erzwungenen Neustart durchgeführt.
Ausserdem startet die Macs wesentlich langsamer als mit OS X 10.6.8.same here... sometimes it works, most of the time it doesn't!!
-
Since upgrading to version 10.8.2 my MacBook Pro won't wake from sleep is her anyway I can fix this?
Since upgrading to version 10.8.2 my MacBook Pro (late 2009) won't wake from sleep is her anyway I can fix this?
> during the entirety of this process the cursor was a "busy" pinwheel/beach ball/whathaveyou for a solid 30 minutes before I turned the computer off with the power button.
All that cursor means is that it is busy trying to do something. You can see if force quitting solves the problem with a simple force quit using command-option-escape. If you are having issues with iCal quitting, sometimes it doesn't always know whether or not it is properly communicating with a particular calendar. This can be a Mobileme issue, or even a phone synchronization issue, or a network issue reaching a shared calendar. Shutting down a machine directly from a cursor is the last step one should try, only after all others have failed. If you have done this in the past, lurking corruption can get worse each time with the directory, and upgrading the system will only enhance any corruption already present. When you restart your Mac, does everything appear to be normal?
Maybe you are looking for
-
How to sync two computers without iCloud?
My wife & I used to sync our Mac laptops. I think we used Mobile Me. ($99 per yr ?) 1) Does Mobile Me still exist? ***She has MBP 10.6.8 and can access iCloud. I have MBP 10.5.8 and cannot access iCloud. 2) How can we sync our Address Books and iCal
-
I love the new Adaptive grid in the PSE 13 Organizer but I lose the adaptive grid when I sort the photos by "album order". Is there a reason behind this?
-
I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when I select the customer? iselect the customer?
-
Since i updated to 10.6.7 i have the following problem. Fonts get weird, and icons disappear randomly. Whats up? And what is Apple doing about this update?
-
Sorry, this is a very basic question but i can't seem to figure it out. I am trying to make a circle logo and some of my vectors are half in and half out of my circle shape, what i want is for anything outside the shape to be cropped/not visible in