Upgraded to OSX 10.6.8 and now cannot print to Xerox Phaser 6180DN

Since upgrading to OS X 10.6.8 on 23rd June I have found that printer reports as "paused".
If you click "resume" it apparently accepts the command but then comes back immediately as "paused".
Any advice would be appreciated (though I suspect it is a glitch in 10.6.8.)
(I have seen a similar report on the Xerox support website)

Apple clobbered the PS drivers - the fix for this has been poseted - see:
     https://discussions.apple.com/message/15498216

Similar Messages

  • I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?

    I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?

    Hi,
    PSC 1315 no longer supported for scanning since Mac OS X v10.5 or while using any newer OS, there is no scan software provided by either HP or Apple (Image Capture)
    You may find this information stated below for Leopard, the same apply for any newer OS version:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01234231&cc=us&dlc=en&lc=en &os=219&product=374568&sw_lang=
    Image capture will not recognize your device as well, only print is supported as you may find listed for teh PSC 1310 Series below:
    http://support.apple.com/kb/HT3669#HP
    Although there is no official scanning support for your device you may still try the 3rd party VueScan software which list your scanner as supported and compatible with Mountain Lion:
    http://www.hamrick.com/vuescan/hp_psc_1310.html
    Shlomi

  • Upgraded to OSX 10.8.2 and now I can't run any downloaded dmg files.

    Upgraded to OSX 10.8.2 and now I can't run any downloaded dmg files. Says "the Following disk images couldn't be opened". and then say's there "isn't enough disk space" I'm pretty sure it has something to do with apps that are not approved by the app store. How can I turn it off?

    Select your hard drive in the Finder and choose File -> Get Info. What is the available space?

  • I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

    I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

    Is this what you downloaded: iTunes 10.7?
    When the update fails what if any error report do you get, specifically? Please do this before trying again:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Upgraded to OS X 10.9 and now cannot connect to Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??

    I have upgraded to OS X 10.9 and now I cannot connect to my Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??

    Like Dan White, I have found that I can still run the Lide 90 under Mavericks. As Dan says, the buttons on the front of the scanner don't work but I rarely if ever used them.
    I have just tested the scanner using Acrobat Pro and it loads up the Scangear software to capture the scan, with no problems at all. I didn't have to reinstall anything as it was all there already and working in Mountain Lion. Photoshop CS 5.1 is different; it does not recognise the scanner, presumably because it can't find a TWAIN driver for it. Image Capture does not recognise the scanner either, but I don't have the latest (10.8) Canon MP Explorer and Explorer Opener software installed.

  • On a MS Vista platform I just "upgraded" to Firefox 10.0.2 and now cannot connect. My wireless devices go throught the same DSL line and work. fine. 9.0.1 (previous version) worked fine. Suggestions?

    I just "upgradd" to Firefox 10.0.2 and now cannot access the internet. This is an MS Vista platform. Wireless devices, through the same DSL line, are still fine, suggestions?

    Did you try to view this article? [https://support.mozilla.org/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Problems connecting after Firefox Update]
    You should also try using Firefox in [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode]
    Thanks,
    Borian

  • I recently upgraded to osx 10.9.2 and now my ftp has been turned off how do i turn it back on

    So frustrated have been trying to chat with apple support and i was supposed to be connected in 2 min.  That was 1 hour ago so I called and they can't transfer me to technical support unless I pay the 59 dollars for support.  All i did was upgrade and now my ftp has been turned off so my network scanner won't conect to the ip address on my imac.  Any help would be appreciated.  Thanks,

    Select your hard drive in the Finder and choose File -> Get Info. What is the available space?

  • Upgraded to snow leopard and now cannot print

    I purchased an iPhone 4S which forced me to upgrade to snow leopard. I have two Epson printers and an Epson scanner.  Now I cannot print.
    I downloaded Epson updates for the new system from the Apple website hoping that would solve the problem.  It did not.
    Current print issues:
    The print dialogue boxes look like inDesign options, not photoshop or "regular" print options.
    I cannot print :  Error:/System/Library/Printers/Printjobmgr/Contents/MacOS
    Any suggestions on what to do next?  This is very frustrating. 
    Thanks in advance.

    Open the System Preferences program and select the Print tab. Delete the printers and then try installing the printers again.
    I don't know what you mean by:
    The print dialogue boxes look like inDesign options, not photoshop or "regular" print options.
    If this persists you might want to take screenshots and include them.

  • Upgraded to iTunes 11.0.3 and now cannot access music.

    I upgraded ti iTunes 11.0.31 on my iMac [OS 10.7.5] and now I am unable to access my itunes library. NOT HAPPY. I have over the years accumulated over 1000 albums that I now seem to have lost. Has anyone got an answer? Clearly Apple doesn't give a whatever.

    Thank you very much for your reply. I did find 2 previous iTune libraries but they seem to be empty.
    Your advice on back up is gratefully noted ... I always assumed Time Machine would do the job.
    I guess like many people I've spoken to it's time to move away from Apple ...a declinig market may be the only thing which will make them realise they need to be more responsive to and respectaful of  the millions of individuals who have been their loyal customers for many years.
    My business has started moving to Windows and we have been surprised how good it is and products like Office 360 are fabulous in the business environment. We have heaps of iMacs ready for the scrap heap!
    I am now looking for an alternative to iTunes. Not an easy feat but clearly there is a huge market opportunity out there for someone to produce a decent product. Any suggestions gratefully accepted.

  • TS1398 i upgraded my 4S to 6.0 and now cannot access my netgear router at home.  I turned security off buw will still access.

    I upgraded to 6 but now cannot access my Nergear router at home.  I have deleted security and reset networks, but no luck.

    still doesn't work
    upgtaded to 6.01, still doesn't work
    changed from WEP to no security, still won't connect
    changed to WPA today, still doesn't connect at home

  • I have up dated my mac to OSX 10.9.5 and now the printer is not working

    After updating my imac to OSX 10.9.5 my HP Photosmart C4580 is not working ,please advise

    Flitsch wrote:
    After updating my imac to OSX 10.9.5 my HP Photosmart C4580 is not working ,please advise
    Uninstall and then reboot and reinstall the printer driver....
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Just Upgraded to Firefox 8.0.1 and now cannot use Firefox preview in Dreamweaver CS5.5...any one else have this issue? I have seen this before in previous version of Firefox but got fixed.

    Not able to use firefox browser preview in Dreamweaver CS5.5 after upgrade to version 8.0.1. Now can preview only in Safari.

    Don't know if there is an option make the download window stay up, but you can bring it back with Ctrl+J then right-click on the download to open the folder it was downloaded to.
    * keyboard shortcuts -- http://dmcritchie.mvps.org/firefox/keyboard.htm
    Where files get downloaded to is in your '''about:config''' settings.
    * [http://kb.mozillazine.org/About:config About:config - MozillaZine Knowledge Base]
    * [http://kb.mozillazine.org/About:config_entries About:config entries - MozillaZine Knowledge Base]
    check out variables beginning browser.download.

  • Installed Ghostscript 8.70 and now cannot print

    I installed (via download and then make install) Ghostscript 8.70. After this, my printer driver to my KonicaMinolta Magicolor 2530DL would crash, generating an "Empty print file!" error when running lpstat -p (and causing the printer to get "pause"d. "Resume"ing the printer would cause it to get paused again immediately when the printer driver would crash again. I tried to then install Ghostscript 8.61 and then 8.64, but now I get "Copying Print Data..." and the job stays active forever. I know that CUPS uses Ghostscript. Is there a version of ghostscript that I can install that will restore my 10.6 system to where it was before I apparently overwrote a good ghostscript install with 8.70? I would have to restore my macbook to 10.5 and then upgrade to 10.6 to get it restored, which would take a lot of time. Does anyone know what version of ghostscript is used in 10.6.2 snow leopard? I have CUPS 1.4.2 on the macbook.

    I've been using the 10.5 driver for the 2430DL. It has worked just fine for 10.6 and 10.5.
    Have you tried the 10.6 driver for the 2430DL in Snow Leopard?
    Its rastertokm2430dl driver must call ghostscript, because that's when the trouble started. The crashreporter would report a crash when 8.70 was installed. The error changed when 8.64 was installed. When I look in /usr/libexec/cups/filter directory, all files were updated Dec 30th, 2009.
    As I mentioned in my first reply, certain applications that send PostScript output to the printing system (almost all applications send PDF to the printing system) may use Ghostscript instead of the pstops filter Apple supplies. Ghostscript is not a requirement of the 2430DL driver on Mac OS X and Ghostscript is not a requirement for CUPS on Mac OS X.
    What happens if you uninstall Ghostscript? I downloaded and installed the 10.6 driver for the 2430DL and set up a printer to print-to-file. I printed a PDF from Preview. My installed version of Ghostscript was not called during the printing process.
    And is there a way to see what libraries are used (similar to ldd) for the driver?
    <pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">otool -L /path/to/file</pre>
    For the 10.6 driver for the 2430 this produces
    <pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">$ otool -L /Library/Printers/KONICAMINOLTA/mc2430DL/Filter/rastertokm2430dl.app/Contents/M acOS/rastertokm2430dl
    /Library/Printers/KONICAMINOLTA/mc2430DL/Filter/rastertokm2430dl.app/Contents/Ma cOS/rastertokm2430dl:
    /usr/lib/libcups.2.dylib (compatibility version 2.0.0, current version 2.8.0)
    /usr/lib/libcupsimage.2.dylib (compatibility version 2.0.0, current version 2.3.0)
    /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services (compatibility version 1.0.0, current version 34.0.0)
    /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0)
    /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 111.1.4)
    /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices (compatibility version 1.0.0, current version 32.0.0)
    /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 476.18.0)
    </pre>
    I would suggest that you update to the newer 2430DL driver and remove Ghostscript. Then see if you have the same problems.
    Matt

  • Upgraded to OSX 10.9.1 and now Pages (iWork '08) takes much longer to launch.

    Initial launch of Pages takes significantly longer to load after upgrading OSX.  I have used 'software update', but nothing out there to download.  Any ideas?  The other components of my iWork '08 bundle work as expected, it is only Pages that seems to have performance issues under OSX 10.9.1.

    If I remember, I believe I thought I had to upgrade to Mavericks for a feature related to sharing or FaceTime or something.  I have an iMac, 2 MacBook Pro laptops (kids), an iPad (wife's) and Apple TV.  So on Mavericks, everyone in the house is happy now; I just don't like that it takes 'forever' to launch Pages.  Perhaps I will upgrade to iWork '09 to see if that takes care of the issue.

  • I upgraded to OSX 10.9.4 and now my iMac will randomly reboot during the day even with apps left open in the background

    I upgraded to 10.9.4.
    Apps are running in the background,
    For some reason when unattended, it will just reboot and go to the login screen (shutting all apps down.)
    Powersaver features are not set to shut down.
    I reset the NVRAM.
    Any ideas?  This is REALLY getting annoying at this point.

    From the menu bar, select
               ▹ System Preferences... ▹ Security & Privacy
    If there's a closed padlock icon in the lower left corner of the preference pane, click it and enter your login password when prompted.
    Click the Advanced button and, in the sheet that opens, uncheck the box marked
              Log out after … minutes of inactivity

Maybe you are looking for