Upgraded to snow leopard and ilife 11 and updated itunes

I tunes is not recognizing my ipod touch.  I recently updated itunes after upgrading to snow leopard and ilife 11.  the ipod shows that it is charging and is recognized by iphoto but not itunes.  I followed the steps listed at http://www.apple.com/support/ipodtouch/assistant/itunes/#section_7 however no change.

Download 9.1 and 9.2.3 updates and install them

Similar Messages

  • !!!HI, SO I BOUGHT MOUNTAIN LION ON MY MACBOOK PRO TRYING TO UPGRADE FROM SNOW LEOPARD, AND WHILE TRYING TO REINSTALL THE OS SETUP AS IT SHOWED IT COULDNT BE VERIFIED, I CROSSED OUT MOUNTAIN LION FROM MY PURCHASES, ITS NOW GONE, DO I HAVE TO BUY IT AGAIN?

    HI, SO I BOUGHT MOUNTAIN LION ON MY MACBOOK PRO TRYING TO UPGRADE FROM SNOW LEOPARD, AND WHILE TRYING TO REINSTALL THE OS SETUP AS IT SHOWED IT COULDNT BE VERIFIED, I CROSSED OUT MOUNTAIN LION FROM MY PURCHASES, ITS NOW GONE, DO I HAVE TO BUY IT AGAIN?

    Please google search for "Mountain Lion disk crash" before upgrading you mac pro. You might need to replace you Mac hard drive after the upgrade.So many people had the same problems including me.
    Be aware of the Mountain Lion upgrade problem.

  • I upgraded to Snow Leopard and and lost addresses in address book.  When I go to Time Machine it does not refill my addresses.  Also told that Address Book 4.1.2 can not be run?  How do I get my address book back up and running?

    I upgraded to Snow Leopard and lost addresses in Address Book.  I'm told I have 4.1.2 and can't use this version.  I still have my addresses in Time Machine and it will not recover.  How do I update Address Book?

    Ooops!
    First Timer mistake.
    Sorry.

  • I just upgraded to Snow Leopard, and I have Aperture 3.1.3.  Now after I import pics from my camera I get a dialog box so large I can't get to the eject card button.   I have to force quit Aperture.  How do I fix?

    I just upgraded to Snow Leopard, and I have Aperture 3.1.3.  Now after I import pics from my camera I get a dialogue box so large that I can't see the eject card button.  Consequently, I can't get rid of the dialogue box without having to do a force quit on Aperture.  How do I fix?

    I can drag the dialog box, but I can't move it up far enough to get to the eject card button.  The dialogue box contains all the jpeg Numbers I am trying to upload.  It has never done that before.  It used to be just a smal dialogue box with no jpeg numbers in it.
    It is even difficult to get to the Finder with the Dialague box is open.  I have to force quit aperture.
    Any ideas would be appreciated.

  • HELP!! i have a ton of videos of my boys stored in iPhoto..They played fine on my old OSX system (leopard).  However, I just upgraded to snow leopard and then to mountain lion and now i can't open my videos at all anymore.  HELP!!

    HELP!! i have a ton of videos of my boys stored in iPhoto..They played fine on my old OSX system (leopard).  However, I just upgraded to snow leopard and then to mountain lion and now i can't open my videos at all anymore.  HELP!!

    Can you tell us about one or more of the video files - what are they?  QuickTime?  MP4?  Something else?  How did you create the video files in the first place?
    I do a lot of video and when I upgraded to Snow Leopard I discovered that many of the QT videos that I had created previously (via iMovie & Final Cut) would not play correctly in QuickTime X - the bizarre behavior was that QT X acted as if my video files were only audio files!  I reported this to Apple at the time but never heard anything back, and there hasn't been any change in later updates to QT X.
    The solution was to (re)install QuickTime 7.  But first look in your Applications > Utilities folder.  When you upgrade from Leopard to Snow Leopard, the installer normally moves the old QT 7 program to your Utilities folder.  If it's there, try using QT 7 to play one of your video files.    If QT 7 is not there, you can download and install it from here  Make sure you are running at least OS X 10.6.3 before you install QT 7.  It's even better if you make sure you are running 10.6.8 which was the last release of Snow Leopard.

  • Greetings: I have just acquired an older mini mac (2006 1.66 ghz core 2 duo) Anyway, it had Tiger 10.4 on it and the Bluetooth worked.  I upgraded to Snow Leopard and everything works fine - except Bluetooth. The Bluetooth icon isn't there. Any ideas?

    Greetings:
    I have just acquired an older mini mac (2006 1.66 ghz core 2 duo) Anyway, it had Tiger 10.4 on it and the Bluetooth worked for the wireless Apple keyboard and mouse.  I upgraded to Snow Leopard and everything works fine - everything except Bluetooth.
    The Bluetooth icon does not exist in the System Preferenc screen.
    I tried to download Bluetooth from Apple site but the message I got told me that I didn't need it. 
    Under Finder, Utilities, I found Bluetooth File Exchange but the message I got was that I had to connect a Bluetooth device to my computer.
    I have to admit that I have no idea what's going on here.  I am hoping to avert the need to try another complete re-install of Snow Leopard.
    Any ideas?
    Thanks
    javaminit

    Puzzled is a polite word for it.
    Thanks Barry - I found the file and trie to send it to trash.  The response: (This item cannot be trashed as it it owned by the system).
    After dancing around with PRAM and SMC and turning on while holding the power-cntrl-option-shift and heavens knows what else, I now have the Bluetooth symbol on the top of the menu bar but it is ghoseted and has a squiggly line through it.   This, I didn't have before so I read this as some progress.  It notes that "Bluetooth is not available">
    However, the Bluetooth icon is still missing from the System Preferences window - you know, between "network" and "sharing".
    You note that you reckon the issue is not software based and you may be correct.  The reason that I wonder about that though, is that before I installed Snow Leopard, the keyboard and mouse both paired with the box under the Tiger 10.4.  That leads me to conclude that hardware is functional and that there is some screwy little bit of software that is not cooperating.
    If I could delete Bluetooth from the system and re-install a fresh version, that might help.  Or, is there a way I can use the Snow Leopard install disc and only load in Bluetooth?
    I'm stumped.
    Thanks for your time
    /Bill C.

  • I just upgraded to Snow Leopard and a new imac. Could someone tell me where the preference is to have a file open in its original file format. Right now my illustrator eps are opening in preview.

    I just upgraded to Snow Leopard and a new Imac. Could someone tell me where the preference is to change file to open in original program instead of preview?

    Right-click on one of the files and choose 'get info'. in the info box. Change the 'open with' setting to your correct application. Check the 'always open with' option before OK-ing the change, then click the 'change all' button before closing the info window.
    Typos edited by: noondaywitch

  • Just upgraded to snow leopard and my intellipoint mouse doesn't work, does it not work with the later versions of the OS

    I just upgraded to snow leopard and now my intellipoint mouse doesn't work, I tried downloading a new driver and it installs successfully except an extension but it still doesn't work, is this typical of the OS higher than 10.4? Is there any way I can get around this problem?

    You need to check with the mouse's developer and see if it's supported or not. That information wouldn't be known by users on this forum.

  • I just upgraded to snow leopard and some of my printers disappeared and I am unable to get them back any ideas

    I just upgraded to snow leopard and some of my printers disappeared and I am unable to get them back any ideas

    Hello DaveDue
    Start your troubleshooting with the article below, you may need to download the printer drivers directly from the manufactures website. 
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Regards,
    -Norm G.

  • I have just upgraded to Snow Leopard and have lost my epson printer software. On Epson Aus. web page there is no upgrade of their software for my printer with Snow Leopard. Can i download a lesser operating system software for printer?

    I have just upgraded to snow leopard and lost my epson printer software. I have checked Epson Aus web site for printer software but they haven't upgraded it for snow leopard. Am i able to download software for a lesser operating system then snow leopard or do i have to purchase a new printer? The model is stylus photo R310.

    Have you tried the R300 or R320 software? Typically the software covers a broad spectrum of printers, often providinbg overlap to cover "relatives" of a series.
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 47541&prodoid=47915738&infoType=Downloads&platform=Macintosh

  • HT6012 I had an older version of Mac OS, I upgraded to Snow leopard and then OSx Lion, most of my software has been upgraded except for Imovie.  Now I can't get my projects to upload or share to iDVD or iTunes.  What do I do?

    I had an older version of Mac OS, I upgraded to Snow leopard and then OSx Lion, most of my software has been upgraded except for Imovie.  Now I can't get my projects to upload or share to iDVD or iTunes.   Also to compound the situation everytime I attempt to share to iDVD or iTunes, iMovie quits unexpectedly.    What do I do?

    If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
    If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
    (61713)

  • I recently upgraded to snow leopard and now every time i open iCal i get multiple events to update in iCal

    I recently upgraded to snow leopard and now every time i open iCal i get multiple events to update in iCal.  Except I don't know where these are coming from or why.   I've check iCal preferences and Help - can't find a way to stop this from happening automatically.  Any Clues?  Also, some of the events are already on my calendar and have been for quite some time.

    Greetings,
    What do you mean by "events to update"?  Do you mean invites to new events or changes to existing invites?
    Troubleshooting:
    1. Your profile indicates you are running 10.6.7, 10.6.8 is the current version Apple > Software update.
    2. First make an iCal backup:  Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    3. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    ---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    3. Launch iCal and test.
    Hope that helps!

  • I have osx 10.6.3 have just upgraded to snow leopard and it says my app ical is ical 3.0.2 and cant be used?  what the??? what do i do now?

    I have just upgraded to snow leopard and ical now wont open.  says it is not compatible and is ical 3.0.2 which seems strange as i have a osx10.6.3 .   have looked for update but cant find one,  what do i do?

    Greetings,
    It sounds like you have moved iCal from it's normal location and are opening a second copy which is the older version.
    The current version of OS X 10.6 is 10.6.8.  As you are running 10.6.3 you need the updates.  Go to the Apple Menu > Software update and keep doing this until it says all updates have been installed.
    Click anywhere on your desktop (the background).
    Go to the top of the computer screen and click on "Go" > "Applications"
    In this list look for "iCal".
    Double-click iCal in this location (which is the proper home for iCal) and see what version it says.
    If it reports the correct version you can drag the iCal from the Applications folder to the dock on your screen to add an button for it (if you already have one in the dock, remove it before you drag this one there).  Be sure to leave iCal in the Applications folder.
    Hope that helps.

  • Upgraded To Snow Leopard And Now The Mic Is Not Working

    I upgraded to Snow Leopard, and now my mic input is not woking on my 2 year old MacBook Pro. Can you tell me how to fix it?

    Dainis,
    Welcome to Apple Discussions!
    You haven't provided much information so there is no way for us to trouble shoot your issue. I'm guessing you plugged a mic into the port, if so go to manufacturer of the mic's web site and see if that device is Snow Leopard compatible. Otherwise our hands are tied on how to help you.
    Regards,
    Roger

  • Can I upgrade to Snow Leopard, and then Mountain Lion, on my 2009 MacBook with OS X 10.5.8?

    I want to upgrade to Snow Leopard so I have access to iCloud for all my devices. I bought my MacBook mid 2009 and am currently running OS X 10.5.8. Does anyone know if I am able to upgrade before I go and buy Snow Leopard?
    Thanks.

    You can upgrade from 10.5 to 10.6 with no problems. Any program that runs under 10.5 should run under10.6. See this list for compatibility with 10.6: http://snowleopard.wikidot.com/ 
    You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any third party Power PC applications http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/ 
    You can order a Snow Leopard 10.6 install disk for $29 from the Apple Store as long as you have at least 1gb of RAM and 5gb of free space on your hard drive. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
    To upgrade your iLife and iWork. If you only want iPhoto or other single apps from iLife '11 you can get them from the App Store after you've upgraded to 10.6.6. iPhoto, iMovie or Garage Band for $15 each and Pages, Keynote or Numbers from iWork '09 for $20 each.
    Once you are at 10.6.8 you can buy Lion for $29 from the App Store if you have at least a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
    Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

Maybe you are looking for