Upgraded to the latest Keynote (5.3 1170) and now videos won't play in presentation mode, only audio

Upgraded Keynote on my home and work computers to the latest version in the AppStore and now videos won't play in presentation mode.  In edit mode you can double click and it will play in the editor.  This happens on both computers running the latest version of ML (10.8.4).
Any help here?  Alread tried a reinstall of ML on one machine with no luck.
Was previously running Keynote 08 (non AppStore version).  Tried creating brand new presentations in 09, no luck.
-steve

I had the same problem today in front of an audience with 300 people (MacbookPro OSX 10.10, Thunderbolt-VGA adapter, PPT 14.4.6).
Here what I figured out so far:
1. It happens when you have PPT open and connect to beamer afterwards
2. You can resolve it (in my case) by quitting PPT and launching it WHEN connected to beamer
3. Yet, make sure Mac does not go into sleep mode or you get a lock-screen in the waiting time. if you do so, you get back to square 1. quit PPT again 2. restart it.
4. Also.... in one case I had to hit the volume control once to get the sound back even though movie was playing
So in short: Connect to beamer first, then launch PPT
I know it is only a symptom fix but it worked for me

Similar Messages

  • I downloaded the latest update for my ipad and now it won't open.  the screen shows the itunes icon and a pic of the usb cable

    I downloaded the latest update for my ipad and now it won't open.  the screen shows the itunes icon and a pic of the usb cable

    That message means that you have to restore the iOS software because something went wrong. Follow the instructions here. I hope that you have a backup.
    iTunes: Restoring iOS software - Support - Apple

  • HT4623 I downloaded and installed the latest update on my ipad and now it will not power on. It only says I tunes and shows and power cord. What should I do?

    I downloaded and installed the latest update on my Ipad and now it will not power on. It shows I tunes and a power cord. What should I do?

    Hey kfortnt2,
    Thanks for the question. I understand you are experiencing issues after updating your iPad. The following resource outlines the screen you are seeing, and a potential resolution:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • I updated to the latest itunes on windows 8, and now itunes won't pick up my iphone 5. How do I solve this?

    Why won't itunes pick up my iphone5? It was working fine before I updated to the latest version. My laptop picks up my phone but itunes doesn't. Any help??

    See this support article for help:
    Device not recognized in iTunes for Windows
    Cheers,
    GB

  • I updated shockwave recently and now videos won't play in firefox, it says the addon has stopped working

    Can you tell me what version of shockwave I should have and how to update it so it works properly

    First, grab the Adobe uninstaller from here:
    http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
    Then download the latest Flash Plugin version from here:
    Select ''Plugin-based browsers'' - the EXE version.
    https://www.adobe.com/products/flashplayer/distribution3.html
    Run the Flash uninstaller program, then reboot your PC.
    Then install the Plugin version of Flash. So you'll have a clean installation of Flash for Firefox.

  • I have installed the latest version of Quick Time and now itunes won't start (v8).  What should I do? Will I lose all my music?

    What should I do? Will I lose all my music?

    Once you are in Recovery Mode, it's too late to do any backup. I am afraid you are going to lose your data.

  • I upgraded to the latest iTunes 10.2.2.12 and now it won't play any music. I can do everything else, except play music. I'm on Windows 7. Any ideas?

    I upgraded to the latest iTunes 10.2.2.12 and now it won't play any music. I can do everything else, except play music. I'm on Windows 7. Any ideas?

    i had this problem and finally figured it out. all that you need to do is go to your start menu and click on computer. select your main drive, (local drive) c usually. Next open the users file follow by your user name file, which is just like it sound it is a file labled as whatever your name is as you have it on your computer. Then you open up the AppData file. Next open the Roaming file. After that open the Apple Computer file followed by the iTunes file. Now you should see the folder labled iTunes Plug-ins folder. Now just Delete that folder. After that go to your iTunes and play your music.
    If for some reason you don't see the AppData file you need to go to the upper left of your screen on select organize. a drop down menu will appear and you need to select folder and searc options. a small folder options window will appear. in this window you need to select the view tab. you need to select the show hidden files, folders, and drives bubble. now hit apply and then ok. that will allow the AppData folder to be seen.

  • I upgraded to the ios5 on my ipad 2 and now all my Notes, Numbers and keynote and goodreader files are gone. Did they back up? If so where?

    I upgraded to the ios5 on my ipad 2 and now all my Notes, Numbers, keynote and goodreader files are gone. Did they back up? If so where? Any help is greatly appreciated.

    that happens for people who used icloud for everything but contacts. When they updated and went through initial
    set up, signing into cloud enabled everything including cloud for contacts. Since they had zero contacts in cloud, cloud cleaned out their contacts, but synced everything else that icloud has, like calendars, reminders etc. If those contacts were never backed up anywhere - they gone. If there is back up in cloud, it needs to be restored.
    Contacts sync in the cloud need to be turned off, right after restore.

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • I just downloaded the latest version of Snow Leopard and now my iWeb won't open.

    I just downloaded the latest version of Snow Leopard and now my iWeb won't open. Does anyone know how to fix it?

    If wish an answer, additional information would be helpful.
    Allan

  • Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!

    Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!
    Anyone can help me?
    Thank you, Claudio

    Hi Russ, Thank you for your reply!
    System Spec:
    2x2.26 Ghz QUAD-CORE
    12 GB RAM 1066 MHz DDR3
    I've stored the library in HARD DISK which is installed inside my computer (1 TB capacity) and different from my hard disk in which I've installed all my applications (600 GB capacity).
    I've installed FCP since 2001, bought FCP X in 2012: never had a problem. Yesterday I was editing my video of my last vacations (in California!) and I have updated FCP X, downloading FCP X 10.1.1: then the problem!
    Strange is the fact that I've just tried to export a short project, I can see the final product quite well.
    What is impossible is playing the clips within Final Cut: they are jumpimg, moving, presenting some frame in green or red ...
    Everything all right in iMovie.
    I've just checked the RAM: 9GB out of 12 GB is busy, could this be the problem?
    Motion is very slow: for 20 sec of project, it takes minutes to play. And once again, if you finalize the projet and export it in Quicktime, you can see it correctly.
    I do hope you may suggest something, I'm getting crazy!
    Thank you in adavance
    Claudio

  • I just upgraded to the new 5.0.1 software and now my Ipad won't sync, any ideas?

    I just upgraded to the new 5.0.1 software and now my Ipad won't sync, any ideas?

    Are you using ITunes 10.5? If so have you upgraded to the OS 5 software? Now it should tell you there's an even newer upgrade to the 5.0.1 when you try to sync your iPhone or iPad.  Hope this helps.

  • I had windows 7 (32bit) and decided to use boot camp but i forgot to download the latest support software from apple and now i cant find any support softwares please help..i am using mac book pro

    I had windows 7 (32bit) and decided to use boot camp but i forgot to download the latest support software from apple and now i cant find any support softwares please help..i am using mac book pro

    Try the Boot Camp Assistant when you are in OS X and download those and follow the directions in BCA utility.
    Then look up the Boot Camp forum. I suspect you thought this was MBP related forum, it is for 65 lb tower model (and well the new "nMP Late 2013 Mac Pro" http://www.apple.com/support/macpro/
    Boot Camp
    There is a support page too
    http://www.apple.com/support/bootcamp

  • I upgraded to OS 6 on my iPhone 4 and now it won't accept my password

    i upgraded to OS 6 on my iPhone 4 and now it won't accept my password

    Hello Nikmuz,
    It sounds like your screen is either black so it looks like it is not on, or it is just plain not turning on at all and it is also not being recognized in iTunes. I would recommend the followng troubleshooting from this article to help you determine whether that is the case or not, named:
    iPhone: Hardware troubleshooting
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    While connected to the iPhone charger, try to reset the iPhone.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Hi! I bought a song on itunes, and now it won't play on my computer or iPod. Itunes on my computer keeps telling me that I'm not authorized to play the song on my computer, even after reauthorizing it. Is there anything I can do to play the song?

    Hi! I bought a song on itunes, and now it won't play on my computer or iPod. Itunes on my computer keeps telling me that I'm not authorized to play the song on my computer, even after reauthorizing it. Is there anything I can do to play the song?

    Hello
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Best of luck,
    Mario

Maybe you are looking for

  • Tomcat 5.0,  deploy application from original location

    Hi! I've an application that runs under Tomcat 5.0. I made a war file and deploy it fine. It deploys the application under tomcat directory hierarchy (webapps...) but I want it to be loaded from the directory from whom I am working, right now I need

  • How to access file server through ethernet BUT internet though wireless

    I'm looking for a way to to run my file server network through ethernet while internet access is provided though wireless, but don't want users to have to switch off the wireless when they want to access the file server. File server is set up at trad

  • PerAdmin Field in IT 0001

    Hi, Is it possible to default field SACHP (PersAdmin) in IT 0001 instead of selecting it manually from Dropdown. Feature Pinch can be used to default Administrator Group Field. We have a requirement to default the PersAdmin field in IT 0001. Please A

  • Jdveloper, Debugging JSP doesnt  work

    Hi, i am using jdeveloper 9.0.4.2.0 , jdk 1.4.2_03 Until yesterday it was possible to set breakpoints in a JSP-Site (let us call it myJSP.jsp). The debugger stopped erverytime at a breakpoint when archiving it. But now it doesnt work any more, that m

  • Is there any FM or BAPI to capture the action in CRMD_ORDER?

    Hi All, In CRMD_ORDER transaction, I need to know the action selected by the user like CREATE TRANSPORT OF COPIES, LOGON TO SYSTEM etc. Is there any FM or BAPI available to capture this action details? Thanks in advance.