Upgraded to TM from old AP Express

We moved into new OLD house that has thick brick walls as well as 2X6 walls with the old plaster and wood lather. The AP Ex would not send the signal far enough. TC came today. It appears to be even slower then AP Ex and my PowerBook is only 5 feet from the TC. Hitting option button & selecting the wireless symbol I get a transmit rate of 54. I tried to run an ethernet from TC to both of my mac's and a PC and they seem to be just as slow. Would this mean that my Cox internet provider is sending a weak signal and or that the various splitters under the house make it slow? The next issue I have is that TM is not backing up to TC. i will check those threads for advice. Is there any way to use my AP Express with TC and if so how? I know my remote speakers don't work

MudShark wrote:
Can I use TM to move stuff, individually, from an old Leopard macbook to a MBP (SL)? apps and data. Will it pull over the stuff in the \library folders?
you can move data individually but the only way to move apps is by using Migration Assistant which works on TM drives too. also MA has an option to migrate user data only (no apps). and in any case, it never overwrites newer apps with older ones so migrating from leopard to snow leopard is not an issue. and snow leopard built in apps like mail are designed to be backwards compatible so they will understand Mail data sitting in your home directory. same for all other apple apps. but if you don't want to migrate all apps with MA then reinstall them from scratch. moving stuff by hand is a nasty proposition and you are likely to miss something. as you say apps that use installers put stuff all over the place and not just in /applications and /library/application support. for apps that install by drag and drop into /Applications you can just transfer the apps themselves.
How screwed up will mail be, being different versions? (BIG concern. also other apple programs that got updated on the L-to-SL)
I don't like the migration assistant since its all apps or nothing.
Are there any third party apps to pick and choose what to xfer?
I'm bracing (and procrastinating) for doing it manually. (might write a little proggy to aide. The *nix stuff of root\library and user\library makes tings a bit sticky/confusing)
(and I wish the developers of apps would put all there stuff i the \library\app-support. 1/2 the time its just stuffed in the \library. <rant over> )

Similar Messages

  • How to copy all the data from old computer to new computer (server)

    Dear all,
    As I want to upgrade the server from old computer to a new one.
    I want to ask how and easy way to copy all of table, sequence, ......data from existing old computer to new computer.
    The old server is window 2000 Server with oracle 10g
    The new server may window 2003 Server with oracle 10g
    Thanks a lot
    Francis SZE

    As far as I can see you are copying from db10g for windows to another host on the same platform and same OS, so a simple cold backup taken from the source database can be restored at the target host. You must first make sure the configuration files and service be created prior to performing the database startup procedure at the target host. You may also as suggested, perform an rman duplication task
    ~ Madrid

  • I am trying to find out if I can upgrade my old airport express from WEP to WPA2?  If so, how do I do that?

    I am trying to find out if my old Airport Express can be upgraded from WEP to WPA2?  If so, does anyone know how to do this?  I have a new PC for work reasons and I cannot get online with my WEP password.  I realize now this is why my family and friends who bring PC's into the house cannot connect - I need WPA2 for PC, and besides, I should upgrade anyway as this is more secure than WEP.  Thanks for any help!

    Clone your system.
    Install the 10.6.8 Java update.
    Clone back from your clone you made before installing the update when finished.

  • I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

    I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

    It is not necessary to delete your old wireless networks first, but doing so may eliminate confusion. If you wish to do that, open System Preferences > Network, and select Wi-Fi from the left column. Click the Advanced... button, then select your old wireless networks and delete them with the "–" (minus) button. Make sure the "Remember networks this computer has joined" remains checked.
    OK then Apply.
    This prevents your Mac from searching for your previous network which will no longer exist.
    A new Express creates an open wireless network that you must select before you can configure it. It appears in your Wi-Fi menu like this:
    Select it. AirPort Utility will load and walk you through its configuration.
    Edit: If you are really using OS X 10.5.1 as shown in your profile, the above screenshot is not applicable. Instead, select the network called "Apple network nnnnnn" and then launch AirPort Utility.

  • Upgrade from Solaris 11 Express to Solaris 11 Release (11/11); Guide MIA?

    Would there be an easy way to upgrade from Solaris 11 Express to Solaris 11 Release (11/11)? The FAQ for Solaris 11 Release has the following hopeful text:
    Can I upgrade to Oracle Solaris 11 from Oracle Solaris 11 Express or Oracle Solaris 11 Early Adopter?
    Yes. Customers can upgrade to Oracle Solaris 11 by using the package management tools. Refer to the Oracle Solaris 11
    Transition Guide (http://www.oracle.com/pls/topic/lookup?ctx=E23824&id=MF JAI) for more information
    But that link comes up with an error page 404, "topic not found".
    The one transition guide I can find is:
    http://download.oracle.com/docs/cd/E23824_01/html/E21799/index.html
    But that covers Solaris 10 jumpstart, not Solaris 11 Express or Early Adopter.
    The Solaris 11 documentation at:
    http://www.oracle.com/technetwork/server-storage/solaris11/documentation/index.html
    Also seems to mention only Solaris 10, not 11 Express or Early Adopter.
    I have already downloaded the full repo for Solaris 11 Release, and the live installer, but I'm hoping it's something as simple as pointing the ips manager to a new repository, or just loading the full repo I already have as a local source. I would also like to keep the dtrace and sun studio set up I have now in the Express version, without reinstalling them on a new release version on bare metal.
    If it keeps the features of the express version while ironing out a few kinks (gdm authentication bug, etc.), that would rock.
    Many Thanks,
    Gordon

    Alan, Thank You, that worked with no problem at all. 11 Express was already using the correct repository, and only required a pkg command update, then other updates.
    So here's what I'm guessing:
    1. The Oracle Solaris maintained repository for Express and Early Adopter are now the same as Release, but they do require an updated pkg executable and pkg update command.
    2. The second form of the command mentioned in the update guide:
    # pkg set-publisher -g http://pkg.oracle.com/solaris/release
    -G http://internal.co.com/solaris solaris
    is for using a local copy of the repository within our lan or vpn wan.
    3. Updates should be fairly regular now that Solaris 11 is in release version.
    I think the new hash (SHA 256) fried some of our old gdm settings for our users, so we're creating new user accounts, and migrating the older accounts. We don't have too many, so it's not a problem for us. But that brings up another point:
    4. The graphical user manager in Express is now gone, and user and group management are now done with command line interface.
    That's fine with me as well. I always use ssh to connect to the machine and then run the screen command for administration. The graphical user manager was always kludgy in Express, and I couldn't get it to work correctly anyway.
    This is great stuff so far. Well done.
    Gordon

  • How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

    How to connect old aiport express to my new Airport Extreme?
    I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
    I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
    I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
    I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
    My Ipad says "base station e5713b cannot be configured."
    I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
    My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
    Sigve

    Hi
    Thanks for Swift reply.
    Yep - I in fact have two A1088 and one A1264
    I actually bought the new router because the Jensen
    router always lost connection to the Airport Express after some hours or days. I
    always needed to restart my Jensen to play music and that was driving my wife
    mad. The hope was that the Extreme should fix this. Both A1088 have been set up
    to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
    Are the A1088 now useless?
    The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
    Please advise
    Regards
    Sigve

  • I upgraded my 3 yr old iMac to Snow Leopard and now my HP C4150 Scanning function doesn't work (not recognized).  I downloaded updated Drivers from the HP site, but still no joy.  Any suggestions?

    I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized).  I downloaded updated Drivers from the HP site and installed them, but still no joy.  Any suggestions?

    aspaceman,
    Perhaps I owe you an apology.   Having re-read that downloading from HP was unsuccessful I feel uncomfortable.  Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
    Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply.  

  • Upgrade from Final Cut Express to Pro 5.0

    I think I made a stupid mistake. I purchased Final Cut Pro 5.0 upgrade thinking I could upgrade from Final Cut Express. But when I am asked to enter the previous versions serial number, it does not accept it. Is there any way to do this or am I going to have to buy the full version of Final Cut Pro?
    Also, I have a G4 Powerbook with the following specs. Is it going to run the program if I do finally get it installed?
    CPU Speed: 867 MHz
    L2 Cache (per CPU): 256 KB
    Memory: 640 MB
    Bus Speed: 133 MHz
    NVIDIA GeForce4 MX

    To upgrade from FCE you need the Final Cut Pro 5 Upgrade from Final Cut Express. I just upgraded FCE and that worked fine for me.
    Hope this helps answer your question...

  • Upgrade from Final Cut Express to Final Cut Pro

    Is there an upgrade path from Final Cut Express to Final Cut Pro?

    Why do you want to upgrade?
    Are there some features you particularly need?

  • I bought a new MacBookPro moved everything from old MacBookPro, new machine runs 10.6.7 - but iPhoto won't 'upgrade' the library - just hangs up supposedly while writing new library. help. thanks.

    i bought a new MacBookPro moved everything from old MacBookPro, new machine runs 10.6.7 - but iPhoto won't 'upgrade' the library - just hangs up supposedly while writing new library. help. thanks.

    How did you "move everything" over?
    Migration assistance does not handle the iPhoto library well sometimes - the best way is to drag the bad iphoto library from the pictures folder on the new system to the desktop, connect the two systems together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old system to the pictures folder of the new system and launch iPhoto on the new system - it will open and convert the iPhoto library as necessary and you will be fine - once you test the iPhoto library you can delete the one on the desktop
    LN

  • I want to re-use my old airport express base station but airport utility doesn't recognise it anymore (it dates from 2005) i would like to use it to connect to my speakers only

    I have an old airport express base station from 2005
    I would like to have a network on it so i can put it upstairs in a room and connect my speakers to it so i can send my music (from itunes) over the airport to my speakers.
    I reset it and now i want to configure but the Airport utility doesn't recognise it anymore.
    Can i update the firmware? has it become useless because too old or what can i do?
    I work on macbook pro with macOSX 10.9.4
    Can someone give me some tips please
    thanks
    J

    Please locate the model number on the side of the AirPort Express. Hard to see.....gray lettering on a white background....so you may likely need a magnifying glass and good lighting to see it.
    The model number starts with a "A" followed by four numbers. If you see A1084 or A1088, unfortunately AirPort Utility 6.x in Mavericks OS X (10.9.4) does not support these older models. However, you can still administer these models if you have a Mac.....or can borrow one for a few minutes....using Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

  • Migrated Aperture 3 upgrade from old Mac Book Pro to new Mac Book Pro.  Can't open Aperture on new machine because I don't have the original serial number for Aperture 2 program originally installed on the old machine.  What is the best solution to this s

    Migrated Aperture 3 upgrade from old Mac Book Pro to new Mac Book Pro.  Can't open Aperture on new machine because I don't have the original serial number for Aperture 2 program originally installed on the old machine.  What is the best solution to this situation

    Call Apple and make a appointment.
    You have 3 months of care and up to 3 years with paid AppleCare, let them handle it and bring everything in.
    Good Luck

  • I have a new iMac but having problems installing final cut express 4 from old macbook pro ?

    i have a new iMac but having problems installing final cut express 4 from old macbook pro ?

    FCE was discontinued nearly 3 years ago and is no longer supported.
    I don't know whether it's possible to install it on Mavericks and if you do it may not perform properly.
    Final Cut pro X and iMovie are the only Apple apps that are supported.

  • I have purchased a new mac book pro and I'm trying to install CS6 from old mac. I have installed cs6 upgrade but, software is asking for cs4 number which is not being accepted.

    I have purchased a new mac book pro and I'm trying to install CS6 from old mac. I have installed cs6 upgrade but, software is asking for cs4 number which is not being accepted.

    I should add that it's an HP photosmart 4280.I found it online and it shows the Mac 0SX operating system.

  • 11gr2 RAC Upgrade-Spfile from old home.

    Hi Team,
    We have sucessfully upgraded database from 11.2.0.1 to 11.2.02 in RAC , But one database is coming from OLD ORACLEHOME
    the spfile location is show ing as old ORALCE home ,at ASM in +DATADG spfile is there but still when we use srvctl start database database name ..
    its getting statted from old oracle home and only one instance is getting started..another instance is not coming up..!
    oracle@HDB1:/oracle11R2/app/11.2.2/dbs $srvctl start database -d FCTS1
    PRCR-1079 : Failed to start resource ora.fcts1fcr.db
    CRS-5017: The resource action "ora.fcts1fcr.db start" encountered the following error:
    ORA-01078: failure in processing system parameters
    ORA-01565: error in identifying file '/oracle/app/product/11.2.0/dbs/spfileFCTS1.ora'
    ORA-27037: unable to obtain file status
    IBM AIX RISC System/6000 Error: 2: No such file or directory
    Additional information: 3
    CRS-2674: Start of 'ora.fcts1fcr.db' on 'hbfcstgdb2' failed
    CRS-2632: There are no more servers to try to place resource 'ora.fcts1fcr.db' on that would satisfy its placement policy
    oracle@HBFC:/oracle11R2/app/11.2.2/dbs $cd /oracle/app/product/11.2.0/dbs/
    SQL> show parameter spfile
    NAME TYPE VALUE
    spfile string /oracle/app/product/11.2.0/dbs
    /spfileFCTS1FCR.ora
    SQL> show parameter database
    NAME TYPE VALUE
    cluster_database boolean TRUE
    cluster_database_instances integer 2
    Thanks
    MAnohar.

    Hi,
    can you do an
    srvctl config database -d <dbname>
    and print the output here.
    Regards
    Sebastian

Maybe you are looking for