Upgraded to version 7.3 - Library file can not be saved - Unknown Error-50

I upgraded to version 7.3 and now I get a pop up error message that says the I Tunes library file can not be saved. The program reports an unknown error occurred (-50). The Pop up error message comes up every minute or so or any time I click on any item in ITunes.
I tried to contact Itunes and they sent me a link to this forum. Can someone please tell what to do to fix this problem or how to reach a real person at Itunes tech support?
I am running Windows XP.

Hi Ray,
Welcome to Apple Discussions..
Check out this link...
Many ppl are having this problem (myself included). I finally had to downgrade to 7.2 from a backup I had made earlier. 7.2, so far, hasn't caused me any problems so I'm waiting for 7.3.1.

Similar Messages

The itunes library file can not be saved. you do not have enough access privileges for this operation with windows xp

How do i solve the following error message that come with uploading to itunes Match: The itunes library file can not be saved. you do not have enough access privileges for this operation with windows xp

Bump.

What does it mean The iTunes library file can not be saved (-54)

I went to sync my phone and this error message keeps popping up:
The iTunes library file can not be saved (-54)
What does this mean?

Permissions error. First, launch Disk Utility, select your Volume & then "Repair Permissions".

My itunes library file can not be saved because i dont have enough memory what can i do??

my itunes library file can not be saved because i dont have enough memory what can i do?

Permissions error. First, launch Disk Utility, select your Volume & then "Repair Permissions".

I am getting an error message saying: The itunes library file can not be saved. You do not have enough access priviliges for this operation. What does this mean?

Hi,
Looking for some help. I am getting the following error message on my itunes account:
"The itunes library file cannot be saved. You do not have enough access priviliges for the operation."
Does anyone know why this is appearing and how to get rid of it?
Thanks

See if these help
the iphone cannot be synced. you do not have enough access privileges for this operation
Re: access privileges ????
Re: Access Privileges
The iPhone "phonename" cannot be synced. You do not have enough access privileges for this operation

Photoshop CC 2014 - The file can not be saved in path because an error has occurred

Hello,
I need again help regarding this issue. Sometimes but very often I receive an error, trying to save a PSD file, the error is: "The file can not be saved in <path> because an error has occurred". After that it is not possible to save the file in any format, using save or save in dialog. The only way to rescue the result is, to save for web as an jpeg. This error occours often using Topaz or NIK filter and until now only in PS-CC 2014. My workflow looks like this:
- Open NEF RAW file in Brdige
- Settings in ACR and give it into PS by clicking OK in ACR
- In PS doing a adjust some levels
- press SHIFT+STRG+ALT+E for a new summary layer
- Uing Topaz Adjust on the new level with 65% opacity
- press SHIFT+STRG+ALT+E for a new summary layer
- Using Topaz DeNoise on the new layer
- pres STRG+i and resize the image to 1200x797
- Using Topaz InFocus on the same layer as DeNoise
- create a vignette with brightness adjustlayer
After this workflow in nearly 90% it is not possible to save the file as PSD or something else, only to save for web as JPG. If I save the file after opening the RAW in PS and after every layer with Topaz Filter, I can save the file when I am done. Same issue occurs using NIK Filters in that way.
I tried to optimize the performance by using this guide: http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html doesn’t solve the issue.
I re- and installed all Adobe Products more than three times, doesn't solve the issu.
After that I ordered a new SSD drive and insall Windows 7 64bit inkl. All latest hotfixes, patches and drivers. I downloaded the newest Adobe Versions and the newest filter sets from Topaz and NIK. Doesn’t solve the issue.
This is my rig:
Gigabyte Z87X-UD4H mainboard
Intel Core i7 4770k
32GB Corsair RAM
250GB Samsung 840 Evo SSD Drive
nVidia Geforce GTX770
During my tests I took the same RAW File and created nearly 20 adjustment layers and summary layers, without using Topaz or NIK filters. No problem, I was able to save the file as PSD file.
From my point of view, actually, the error occurs only when I am using Topaz or NIK filters. Both supports doesn’t know the issue and if I search the web, I can’t find more then me. It seemed to depend on my settings, my rig or something else, perhaps a cache is overflowed or something like this. Adobe telephone support can’t help because I said I use a third party filter. But it occurs with two different manufactures…
So please guys, help me to figure out why this error occurs in my system.
Thanks in Advance and best regards,
Michael

Update: I tried several times to reproduce the error, actually it dosen't occur. I changed nothing on my system, without reboot it twice. This is what I said in my beginning times: it occurs sometimes but often. I will keep you up to date.

File can not be saved

Hello. I recently moved my Logic Project files to an external drive. When I try to save them, or save as, Logic errors with "the file [xxx] can not be saved". It will still save on my main hard drive if I change the save location. The external drive is set for ownership to be ignored, but it seems like there is some permissions issue here. Anyone come across this? Thanks.

Thanks Jerry,
that's what I did. Little arkward (with 20 sheets to copy) but at least I can go on!
Still remains the question what the reason for this behavior might be :-?
JK

"iTunes library file can't be saved."

The full message is "The iTunes library file cannot be saved. The disk could not be read to or written from."

Hi there Br0x,
You may want to try rebuilding the iTunes library as an initial troubleshooting step. Take a look at the article below for more information.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
-Griff W.

The Itunes Library File Could Not Be Saved A unknown Error Occurred -1450

I keep getting this error message since I updated to this version of Itunes. Ver. 7.0.2.16. I had absolutly no problems until this update. I have removed and reinstalled twice..and I mean removed all files ccleanered the whole PC the whole she-bang, re-ripped my music, new ITL library,XML every thing, over five thousand songs.
I noticed while importing songs I would get this 1450 error if I tryed doing to many songs at once, looked like a resources issue even though the memory and processer usage was showing plenty of headroom..?? But now its popping up while just trying to play songs in ITUNES. It says its unable to save the file etc. and causes stutterring in the song but amazingly song counts etc. show up in the times played and date played columns. The ITL file also shows as having last been changed/modified at the same time the error message says it couldn't be saved...anyone know what's going on here???
Tried running with no virus checker running, no firewall etc. Ran a tweakIU routine ...a fix suggestion that I found on a google search, reset the file permissions etc.
I also get the insufficent privilages message error when trying to set ITUNES as default audio player....(I have ADMIN priv.)
I'm apparantly not the only person experiencing this, a Google search gets a lot of hits on this 1450 error message.
HELP PLEASE
ASUS CUSTOM Windows XP Pro

Well I believe I may have found the solution to the -1450 error at least for my situation.
While pouring over settings I noticed ITUNES runs in a protected memory space. Well this along with the symptoms displayed (being unable to update the library file if a large number or files are changed/edited added etc.) led me to examine my virtual memory settings under the Windows/control panel/performance/advanced/Memory usage tab and I noticed that for some reason memory usage was selected as optimized for "System cache" VS "programs". I changed this to programs and also while in the same area disabled the EP "execution prevention" feature of the INTEL processor.
I can now import change/files listen to music etc. without this -1450 error presenting itself.
I'm not sure which of the two steps solved the problem but I suspect the Memory optimization being set for "system cache" was the problem.
While I never had any problems running other apps.(I do have a lot of memory)I think ITUNES was having a problem with this setting when writing to and from temp files and the ITUNES.ITL file.
I have no idea how or when or why this setting was as it was as all my other PC's are set for program performance optimization.
Hope some one finds this helpful.

HT201263 What does can not restore iphone unknown error occured (3005) mean? is it dead?

I have an Iphone 3. Yesterday it was working fine then Itunes said it had an update. The update was unsucsessful and it said the phone needed to be restored. I went through the restore steps and recieved an error. Any suggestions?

From this support document http://support.apple.com/kb/TS3694
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Error 3002: If you experience this error while updating an iPod touch (2nd generation) or iPhone 3G, please use the standard update or restore process in iTunes (click Update or Restore).
Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again.
Error 3194: You may not have the latest version of iTunes installed Update to the latest version of iTunes. If the issue persists, follow the steps above in "Unable to contact the iOS software update server gs.apple.com".
Error 3004: If you are using a Mac, you may be able to resolve an error 3004 by quitting iTunes and using the following command at the command line: dscacheutil -flushcache

Can not sync. Unknown error -50 appears

Any ideas as to why it will not sync

Good Morning Kristiane1969,
I understand you have some pictures on your iPad that you want to sync or transfer to your computer. One way to accomplish this is to import the pictures to your computer directly. Once you have a copy of your images backed up to your computer, then you can delete the images you no longer want on your iPad by selecting them in the Photos app, and then tapping the trash can icon.
The resources below will explain how to do that.
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
https://support.apple.com/en-gb/HT201302
Once you have backed up and removed the pictures from your iPad, try syncing again. If you still get error 54 in iTunes when you try to sync, there may be an issue with permissions. Here is how to run the disk permissions tool using Disk Utility:
About Disk Utility's Repair Disk Permissions feature - Apple Support
https://support.apple.com/en-us/HT201560
Hope that helps ...
- Judy

Preview error message doc "can not be saved because it does not exist"

I have had a long standing problem with Preview. I know it is odd but around closing time every day, two of my computers both running 10.6.8 get error message when trying to save a new document. The document will be open on my screen and when I go to save it I get the error message that the file can not be saved because it does not exist. Some background that may be relevent:
The documents that I create all day long (for at least 6 years) are output from a 4D database. I generate a report from the db and it opens in Preview as a PDF file. All day long I have no issues with creating and saving these docs. Then around 4-4:30 when many people are getting ready to leave two of our computers (one iMac 3.06GHz Intel Core i3 and an older macMini) have this problem. All you have to do to fix it is quit Preview and regen the doc. Unfortunately we often lose a lot of work because of it. I've tried anticipating when it will happen and restart Preview before creating the new doc but that only works occasionally.
I suspect that it has something to do with people logging out (I am usually the last to leave) and perhaps some shared application is effected. Everyone does have their own copy of Preview and we all use separate 4D clients. I have searched the internet many times. I have found some similar problems that people have had with this error but not related to my own. Unfortunately both Preview and "the file can not be saved because it does not exist" are very general terms that bring up all kinds of unrelated things.
I was going to try to delete the Preview Prefs file and start again but I can not find a plist for preview or any other file that is clearly the prefs. Searched the internet for that too but did not find it.
Does anyone have any ideas on this odd problem?
Thanks for reading!
Susan

To answer your questions:
Are you loading them by using Preview>File>Open, double clicking, or dragging the file? None of the above. I am loading them through 4D. I generate a report on 4D and it opens in Preview.
When this happens can you Open another PDF from the same location? Yes, see details below.
Are you loading these PDFs from the Server or another Mac? From the server. The file is created by a 4D client that resides on my disk but the 4D server which it references is on another computer. I am still shared to that computer and my connection to 4D has not changed as far as I can tell.
I found today (details written in response to another question) that when this happens I can save the file to my own desktop but not to the server. It makes me think there may actually be something happening with my connection. I wonder does a server do any realigning (for lack of a better word) of connections as some connections are lost? While I had the document open (the one that I could not save to the server) I went to the server and opened a document that existed there. I saved the file back to the server with a different name. No problem, it worked just fine. Now I am really confused....
1) A PDF file generated by 4D that has not ever been saved to the server can not be saved to the server via Preview around the time that other people are disconnecting from the server and shutting down their computers for the day. Quitting Preview and regenning the document fixes the problem.
2) The same PDF file that can not be saved to the server can be saved to my own disk.
3) Other files that are already existing on the server can be saved with a different name to the server at the same time as a new document can not.
I wish I felt like I was getting closer to the answer...
Thanks for thinking about it.
Susan

When double click itunes icon it shows " The file itunes library.itl can not be read because it was created by a newer version of itunes" so what can i do?

when double click itunes icon it shows " The file itunes library.itl can not be read because it was created by a newer version of itunes" so what can i do?

Unless you have attempted to downgrade to an older version of iTunes this is likely to be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
tt2

I have just upgraded to Lightroom 5 and my pictures that were from an later version came over but read on each picture "File can not be found"

I have just upgraded to Lightroom 5 and my pictures that were from an later version came over but read on each picture "File can not be found"

This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgradeto iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1

After upgrading to version 6 my ArcGIS files become corrupted if I save them while I have FF open (sporadic occurence, but limited to FF being open). How can I downgrade to version 5?

I am using ArcGIS 10 and Firefox 6 on Windows XP.
After upgrading to version 6 my ArcGIS files become corrupted if I save them while I have FF open (sporadic occurence, but limited to FF being open). Any ideas of what could be causing this? I have also posted on the ArcGIS forum site for input from that side.
How can I downgrade to version 5? If that is the only option available.

Thanks for the reply. It doesn't have to process the php, it just has to show the HTML content. It did that just fine before the last upgrade but won't now.
I've seen that page you referenced: http://kb.mozillazine.org/File_types_and_download_actions.
It doesn't help. The things it says to look for aren't there for me, specifically:
browser.download.pluginOverrideTypes
plugin.disable_full_page_plugin_for_types
I followed the rest of the instructions but it didn't help.
I did get it to quit opening tabs, instead it prompts me what it should do with the file every time now. What it should do, and used to do, is open the php page and display the HTML content.
Any other ideas?

Upgraded to version 7.3 - Library file can not be saved - Unknown Error-50

Similar Messages

Maybe you are looking for