Upgraded to XP-now puchased music wont copy to iPod

I Upgraded to Windows XP and reinstalled Itunes and now I get this message:
Some of the songs in the iTunes music library, including "Yeah", were not copied to the iPod "Alex's iPod" because you are not authorized to play them on this computer.
Any Ideas?

"What if I buy a new computer or upgrade to a newer version of windows when it comes out, eventually I will use up my 5 authorizations..and then what? I have to buy the music again? What a load of baloney!"
I'm sorry, I don't mean to sound rude, but you are criticizing something you don't understand correctly.
Before you do any of those things, you just need to deauthorize the computer, then reauthorize the new one. That way, you don't use up any of your 5 authorizations. If you forget to deauthorize a computer that you no longer have access to, you can contact iTMS customer support who will do it for you.
Could I suggest you give that document I linked to previously a thorough read, as it explains all about authorizing and deauthorizing computers.
I don't understand why you're getting so worked up about it. Apple aren't trying to cheat you. : )

Similar Messages

  • Music Wont Copy to iPod - account trouble

    I recently installed the new version of itunes. I think i already had an apple account on the last one, and with the new one accidentally set it up to use my aol acccount. So there may be two accounts on there?
    However i bought some music from itunes and when i tried to copy it to my ipod it came up with a message saying it couldnt be copied because the ipod already had content from 5 or more accounts.
    Does anyone know why this is happening and how i can fix it? (aside from restoring the whole thing?) thanks!

    "What if I buy a new computer or upgrade to a newer version of windows when it comes out, eventually I will use up my 5 authorizations..and then what? I have to buy the music again? What a load of baloney!"
    I'm sorry, I don't mean to sound rude, but you are criticizing something you don't understand correctly.
    Before you do any of those things, you just need to deauthorize the computer, then reauthorize the new one. That way, you don't use up any of your 5 authorizations. If you forget to deauthorize a computer that you no longer have access to, you can contact iTMS customer support who will do it for you.
    Could I suggest you give that document I linked to previously a thorough read, as it explains all about authorizing and deauthorizing computers.
    I don't understand why you're getting so worked up about it. Apple aren't trying to cheat you. : )

  • HT5262 I've updated to iOS 6 and now my music wont play in my Audi - anyone else had this problem?

    I've updated to iOS 6 and now my music wont play in my Audi - anyone else had this problem?

    What do you mean by "on the days that should be marked"?  Are you calendar events displayed on the wrong days?

  • I deleted bonjour in error, now my music wont play ?

    I deleted bonjour in error, now my music wont play ? Do I need this to play music ? If so how do I re install ?
    Thanks

    - Did you update the iPod?
    - Try the following:
    - Reset. Nothing will belost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • I did the new update and now my music wont play through speakers

    help I did the update and now music wont play or text sounds dont work

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I just updated software now my music wont play

    I just updated my software to the 6.1.2 on my 4s now my music and sounds wont play.  I have tried shutting down, making sure all sounds were on.  Any idea what could be wrong?

    I have the same issue.  Some songs will play, but some just sit there when I select them.

  • Upgrading to Windows vista means itunes wont detect my ipod?? Help please.

    Recently upgraded to windows Vista. Big whopdeedo.
    But anyway, when I plug my ipod in, windows tries to update drivers for it, but of course failas horribly.
    However, this is having a knock on effect that means itunes wont detect my ipod. So, while my ipod recharges, I cannot sync it. Thus I can't add new songs and what-not.
    Please help.

    Yes my ipod is jailbroken, but this has never proved an issue before.
    Its not just itunes that now wont recognise my ipod, my other software wont either, and they used to work with the jailbroken ipod.
    This all started after i synced a nano, then connected my ipod and a screen came up saying ipod camera connected.
    I click on the camera icon in mycomputer and properties tab then selected take no action in the events tab.
    This hasnt resolved my issue, and the ipod still comes up as a camera in mycomputer, the only difference being im now not prompted to choose a program to view my photos with.
    This is really getting up my nose, as for the second poster, sorry that article was no help at all.
    Please someone help me

  • Updated to 8.2 and now my music wont play.

    i updated my itunes with the most recent version and now when i go into itunes and try to play a song nothing happens.  It acts like it is going to play, but up top where the song displays the music timeline wont advance.  Help!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
    tt2

  • Upgraded Hard Drive, now Combo drive wont recognize. HELP!!!!

    I upgraded my hard drive, installed the os-X (10.3.9 i think) and the cd combo worked fine, removed the combo to do somthing for the laptop (installed it in the iBook), and now when I put another combo drive (same model different drive) into the mini, the mini doesn't even recognize that there is a drive at all,
    it will take a disk, but wont eject or mount.
    what should I do?
    should I put the original drive into the mini?
    Also, i cant re-install OS-x because the optical drive wont mount in the mini, and the ibook says that It cannont use the software with the version that is installed on it (10.4.somthing)

    There isn't a BIOS in G4 Mac systems - in essence, rather than having a pre-determined configuration, the system checks for existent components at startup such that if the drive in the system was recognised and had a viable driver, it would be functional.
    First thing to do is check whether the system sees the drive at all. Go to the Apple menu and select 'About this Mac'. Then click the 'More info' button when the dialog box gives the MacOS version, processor and memory.
    The click the 'ATA' tab on the left. You should see two entries - the first being the internal hard drive which will be shown in the lower portion of the right-hand pane by model and capacity. If the combo drive is not showing there with any entry (ie, there is only one ATA device, the internal HD) then more than likely the drive is not connected correctly as Boece has suggested. If it IS listed there and correct by model number, then it may be that the drive itself is faulty or the system's power management unit isn't controlling it correctly.
    If the later is the case, a PMU reset may help. Try the following:
    - Unplug all cables from the computer, including the power cord.
    - Wait 10 seconds.
    - Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
    - Let go of the power button.
    - Press the power button once more to start up your Mac mini.

  • Upgraded to 9, now itunes store wont work/show up

    I tried to purchase a program from Itunes (Follow your team - Cowboys) and was instructed to upgrade to 9. I did and now neither the store or the search function will work. The progress bar only goes half way and then freezes. I upgraded to Win XP service pack 3 (QT7 said it was required) and that didnt fix it. Uninstalled and reinstalled I Tunes according to the Apple instructions and that didnt work. My password works and I can access my account info and then a black toolbar shows up that lets me see most of the Itunes categories, but search still wont work, and if I try to access the store, it just freezes and then times out.
    Please help, very frustrated.

    Success!!!! My problem appeared to be an obscure anti virus program I thought I had removed a while ago. I uninstalled it ( and a bunch of other reaaly old crap) rebooted and thought it hadnt fixed when suddenly the progress bar started moving again and finally loaded the store. Apparently the av software was causing a conflict.

  • Music wont copy back to iphone via itunes

    hi all i have an iPhone 5s 16gb on iOS 8.1.1 with 5gb of spare space. i am trying to get my music back on the phone after restoring and updating to ios8 with itunes12.0.1.26, i have added my music files to iTunes library then selected the songs i wont across to phone i click sync and it says it is syncing up, and it shows the songs as going over while syncing however after sync finishes it reverts back to just 2 songs on the phone which where brought via the phone.
    are my settings right ?
    but there is no music on my phone so im as stuck and confused as ****. please someone tell me what i have wrong and need to do to correct it, i have looked on google, and followed a few of the suggestions but none at this time gets me any further than i am at this time.

    done as suggested above.
    applied n sync but result still the same
    still only the 2 songs brought via phone, ive even tried deleting them n then syncin up n no joy

  • How come my music wont copy to my ipod but is already on itunes?

    i have added new music to my itunes library but when i try and move it to  my ipod library it wont it just turns grey and wont add or play

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.

  • Music Video wont copy to ipod

    When i try to update my ipod and put a new music video on there I get a message saying
    "This video was not copied to the ipod because it cannot be played on this ipod"
    Why is this when the video is in proper MPEG-4 Format? Please HELP!!!!!!!!!!!!!!!!

    this like should help
    http://docs.info.apple.com/article.html?artnum=301461

  • Upgraded to IOS5, now my music files are missing

    Hi!
    I am hopeing someone can help me
    I updated to IOS5 a couple of days ago, and since then I have been trying to find a solution to the "missing music files" in my music library.
    All 439 songs are listed in the Music Library, but when I double click one to play it, I get the following error:
    The song "xxxxx" could not be used because the original file could not be found.  Would you like to locate it?
    I click "Locate", it takes me to what I am guessing is the lastest iTunes Back-up called "iTunes Library 2011-10-12" I click on it but nothing happens.
    Anyone have the same problem and fix it?
    Any ideas/help will be greatfully received
    Many thanks in advance
    XXX

    Same here. All the music I have installed from CDs is gone. It's gone from iTunes in the computer and, of course, from the phone.
    Before I installed iOS5 I backed up. The restore put everything back except the music. Now I can't find it anywhere on my laptop

  • Upgraded hd and now tv shows WONT play

    i just upgraded my hard drive and and now that i have everything on my new HD my tv shows on itunes will not play (i used cloning software and cloned everything on the new drive). can anyone help? right now i feel like ive just tossed my money away on shows i cant even watch anymore! grr!

    Repair Disk Permissions ...
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select FirstAid, then click: Repair Disk Permissions. Quit DU when it's finished and reboot.
    Carolyn

Maybe you are looking for

  • No Sound on Satellite A105-S4201

    I recently lost all sound on my Satillite A105-S4201.  In Device Manager, under Sound and Video Devices, there are numerous yellow flags (too numerous to name here).  I attempted to install the device driver (Realtek HD) from the Toshiba Recovery CD

  • How to erase photos from photo stream?

    How can I erase photos from the photo stream album in my iphone?

  • How to disable internal superdrive

    Hello. The superdrive in my mid 2011 imac 27 is dead (won't accept disk) so I wonder if there is a reasonably easy way to disable it so my system doesn't see it anymore.

  • Is it possible incremental load using sqlloader

    Hi I am working on datawarehousing projects and every day loading 3 lakhs record to target server using sqlloader.Is it possible incremental loading using sqlloader Example First day loaded 3 lakhs record into target using sqlloader ,when next day ne

  • UDDI sample clinet not setting the wsdl location

    Hi I am using the uddi PublishService2UDDI.java of dev2dev and am trying to register a deployed service with a name and a wsdl url location. The program runs successfully and registers the service but the "overview url" where the wsdl url is supposed